Revised January 2005 74VCX16722 Low Voltage 22-Bit Register with 3.6V Tolerant Inputs and Outputs General Description Features The VCX16722 low voltage 22-bit register contains twentytwo non-inverting D-type flip-flops with 3-STATE outputs and is intended for bus oriented applications. The design has been optimized for use with JEDEC compliant 200 pin DIMM modules. ■ 1.65V–3.6V VCC supply operation The 74VCX16722 is designed for low voltage (1.65V to 3.6V) VCC applications with I/O capability up to 3.6V. The 74VCX16722 is fabricated with an advanced CMOS technology to achieve high speed operation while maintaining low CMOS power dissipation. ■ 3.6V tolerant inputs and outputs ■ tPD (CLK to O n) 3.6ns max for 3.0V to 3.6V VCC 4.6ns max for 2.3V to 2.7V VCC 9.2ns max for 1.65V to 1.95V VCC ■ Power-down high impedance inputs and outputs ■ Supports live insertion/withdrawal (Note 1) ■ Meets JEDEC registered module specifications ■ Static Drive (IOH/IOL) ±24mA @ 3.0V ±18mA @ 2.3V ±6mA @ 1.65V ■ Latchup performance exceeds 300 mA ■ ESD performance: Human body model > 2000V Machine model >200V Note 1: To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pull-up resistor; the minimum value of the resistor is determined by the current sourcing capability of the driver. Ordering Code: Order Number Package Number Package Description 74VCX16722MTD MTD64 64-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 6.1mm Wide Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. © 2005 Fairchild Semiconductor Corporation DS500192 www.fairchildsemi.com 74VCX16722 Low Voltage 22-Bit Register with 3.6V Tolerant Inputs and Outputs February 1999 74VCX16722 Connection Diagram Pin Descriptions Pin Names Description OE Output Enable Input (Active LOW) CE Clock Enable Input (Active Low) CLK Clock Input D0- D21 Data Inputs O0 - O21 3-STATE Outputs Truth Table CLK CE OE Dn On X X H X Z X H L X On ↑ L L L L ↑ L L H H L or H L L X On H = Logic HIGH L = Logic LOW X = Don’t Care, but not floating Z = High Impedance On = Previous On before LOW-to-HIGH Clock Transition ↑ = LOW-to-HIGH Clock Transition Functional Description Logic Diagram The VCX16722 contains twenty-two D-type flip-flops with 3-STATE standard outputs. The twenty-two flip-flops will store the state of their individual D-type inputs that meet the setup and hold time requirements on the LOW-HIGH Clock (CLK) transition, when the Clock-Enable (CE) is LOW. The 3-STATE standard outputs are controlled by the Output-Enable (OE). When OE is HIGH, the standard outputs are in high impedance mode but this does not interfere with entering new data into the flip-flops. www.fairchildsemi.com 2 Supply Voltage (VCC) −0.5V to +4.6V DC Input Voltage (VI) −0.5V to +4.6V Recommended Operating Conditions (Note 4) Power Supply Output Voltage (VO) Operating Outputs 3-STATE −0.5V to +4.6V Outputs Active (Note 3) −0.5V to VCC + 0.5V DC Input Diode Current (IIK) VI < 0V Output Voltage (VO) DC Output Diode Current (IOK) VO < 0V −50 mA +50 mA ±50 mA Supply Pin (ICC or Ground) 0V to VCC 0V to 3.6V VCC = 3.0V to 3.6V ±24 mA VCC = 2.3V to 2.7V ±18 mA VCC = 1.65V to 2.3V DC VCC or Ground Current per Storage Temperature Range (TSTG) Output in Active States Output in 3-STATE Output Current in IOH/IOL DC Output Source/Sink Current (IOH/IOL) 1.2V to 3.6V −0.3V to 3.6V Input Voltage −50 mA VO > VCC 1.65V to 3.6V Data Retention Only ±6 mA Free Air Operating Temperature (TA) ±100 mA −40°C to +85°C Minimum Input Edge Rate (∆t/∆V) −65°C to +150°C VIN = 0.8V to 2.0V, VCC = 3.0V 10 ns/V Note 2: The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the Absolute Maximum Ratings. The Recommended Operating Conditions tables will define the conditions for actual device operation. Note 3: IO Absolute Maximum Rating must be observed. Note 4: Floating or unused pin (inputs or I/O's) must be held HIGH or LOW. DC Electrical Characteristics (2.7V < VCC ≤ 3.6V) Symbol Parameter Conditions VCC (V) VIH HIGH Level Input Voltage 2.7–3.6 VIL LOW Level Input Voltage 2.7–3.6 VOH HIGH Level Output Voltage VOL LOW Level Output Voltage 2.0 VCC − 0.2 IOH = −12 mA 2.7 2.2 IOH = −18 mA 3.0 2.4 IOH = −24 mA 3.0 2.2 IOL = 100 µA 2.7–3.6 0.2 IOL = 12 mA 2.7 0.4 IOL = 18 mA 3.0 0.4 IOL = 24 mA 0V ≤ VI ≤ 3.6V IOZ 3-STATE Output Leakage 0V ≤ VO ≤ 3.6V VI = V IH or VIL IOFF Power Off Leakage Current 0V ≤ (VI, VO) ≤ 3.6V ICC Quiescent Supply Current VI = V CC or GND VCC ≤ (VI, VO) ≤ 3.6V (Note 5) VIH = VCC − 0.6V Units V 0.8 2.7–3.6 Input Leakage Current Increase in ICC per Input Max IOH = −100 µA II ∆ICC Min V V V 3.0 0.55 2.7–3.6 ±5.0 µA 2.7–3.6 ±10 µA 0 10 µA 2.7–3.6 2.7–3.6 20 ±20 750 µA µA Note 5: Outputs disabled or 3-STATE only. 3 www.fairchildsemi.com 74VCX16722 Absolute Maximum Ratings(Note 2) 74VCX16722 DC Electrical Characteristics (2.3V ≤ VCC ≤ 2.7V) Symbol Parameter Conditions VCC (V) VIH HIGH Level Input Voltage 2.3–2.7 VIL LOW Level Input Voltage 2.3–2.7 VOH HIGH Level Output Voltage VOL LOW Level Output Voltage IOH = −100 µA 2.3–2.7 Min Max Units 0.7 V 1.6 V VCC − 0.2 IOH = −6 mA 2.3 2.0 IOH = −12 mA 2.3 1.8 IOH = −18 mA 2.3 1.7 V IOL = 100 µA 2.3–2.7 0.2 IOL = 12mA 2.3 0.4 IOL = 18 mA 2.3 0.6 2.3–2.7 ±5.0 µA 2.3–2.7 ±10 µA 0 10 µA II Input Leakage Current 0 ≤ VI ≤ 3.6V IOZ 3-STATE Output Leakage 0 ≤ VO ≤ 3.6V VI = VIH or VIL IOFF Power Off Leakage Current 0 ≤ (VI, V O) ≤ 3.6V ICC Quiescent Supply Current VI = VCC or GND VCC ≤ (VI, VO) ≤ 3.6V (Note 6) 20 2.3–2.7 ±20 V µA Note 6: Outputs disabled or 3-STATE only. DC Electrical Characteristics (1.65V ≤ VCC < 2.3V) Symbol Parameter Conditions VCC (V) VIH HIGH Level Input Voltage 1.65 - 2.3 VIL LOW Level Input Voltage 1.65 - 2.3 VOH HIGH Level Output Voltage VOL LOW Level Output Voltage IOH = −100 µA Max 0.65 × VCC VCC − 0.2 IOH = −6 mA 1.65 1.25 IOL = 100 µA 1.65 - 2.3 0.2 1.65 0.3 II Input Leakage Current 0 ≤ VI ≤ 3.6V IOZ 3-STATE Output Leakage 0 ≤ VO ≤ 3.6V VI = VIH or VIL IOFF Power Off Leakage Current 0 ≤ (VI, V O) ≤ 3.6V ICC Quiescent Supply Current VI = VCC or GND VCC ≤ (VI, VO) ≤ 3.6V (Note 7) Note 7: Outputs disabled or 3-STATE only. 4 Units V 0.35 × VCC 1.65 - 2.3 IOL = 6mA www.fairchildsemi.com Min V V V 1.65 - 2.3 ±5.0 µA 1.65 - 2.3 ±10 µA 0 10 µA 1.65 - 2.3 20 ±20 µA TA = −40°C to +85°C, CL = 30 pF, RL = 500Ω Symbol Parameter VCC = 3.3V ± 0.3V Min VCC = 2.5 ± 0.2V Max Min VCC = 1.8 ± 0.15V Max Min 200 Units Max fMAX Maximum Clock Frequency 250 tPHL, tPLH Propagation Delay Clock to Bus 1.3 3.6 1.5 4.6 100 2.0 9.2 ns tPZL, tPZH Output Enable Time 0.6 3.5 0.8 4.5 1.5 9.0 ns tPLZ, tPHZ Output Disable Time 0.6 3.2 0.8 4.2 1.5 7.6 tS Setup Time 2.0 tH Hold Time 0.0 0.0 0.5 ns tW Pulse Width 1.5 1.5 4.0 ns tOSHL Output to Output Skew tOSLH (Note 9) 2.0 0.5 MHz 3.0 ns ns 0.5 0.75 ns Note 8: For CL= 50 pF, add approximately 300 ps to the AC maximum specification. Note 9: Skew is defined as the absolute value of the difference between the actual propagation delay for any two separate outputs of the same device. The specification applies to any outputs switching in the same direction, either HIGH-to-LOW (tOSHL) or LOW-to-HIGH (tOSLH). AC Electrical Characteristics Over Load (Note 10) TA = −0°C to +70°C, RL = 500Ω VCC = 3.3V ± 0.3V Symbol CL = 0 pF Parameter Min CL = 50 pF Units Max Min Max tPHL, tPLH Propagation Delay Clock to Bus 1.1 2.5 1.9 3.9 ns tPZL, tPZH Output Enable Time 0.7 2.4 1.0 3.8 ns tPLZ, tPHZ Output Disable Time 0.7 2.1 1.0 3.5 tS Setup Time 2.0 tH Hold Time 0.0 0.0 ns tW Pulse Width 1.5 1.5 ns 2.0 ns ns Note 10: This parameter is guaranteed by characterization but not tested. Dynamic Switching Characteristics Symbol VOLP VOLV VOHV Parameter Quiet Output Dynamic Peak VOL Quiet Output Dynamic Valley VOL Quiet Output Dynamic Valley VOH Conditions CL = 30 pF, VIH = VCC, VIL = 0V CL = 30 pF, VIH = VCC, VIL = 0V CL = 30 pF, VIH = VCC, VIL = 0V 5 VCC TA = +25°C (V) Typical 1.8 0.25 2.5 0.6 3.3 0.8 1.8 −0.25 2.5 −0.6 3.3 −0.8 1.8 1.5 2.5 1.9 3.3 2.2 Units V V V www.fairchildsemi.com 74VCX16722 AC Electrical Characteristics (Note 8) 74VCX16722 Capacitance Symbol Parameter Conditions TA = +25°C Typical Units CIN Input Capacitance VI = 0V or VCC, VCC = 1.8V, 2.5V, or 3.3V, 3.5 CI/O Input/Output Capacitance VI = 0V, or VCC, VCC = 1.8V, 2.5V or 3.3V 5.5 pF CPD Power Dissipation Capacitance VI = 0V or VCC, f = 10 MHz, VCC = 1.8V, 2.5V or 3.3V 13 pF IOUT - VOUT Characteristics IOH versus VOH FIGURE 1. Characteristics for Output - Pull Up Driver IOL versus VOL FIGURE 2. Characteristics for Output - Pull Down Driver www.fairchildsemi.com 6 pF 74VCX16722 AC Loading and Waveforms FIGURE 3. AC Test Circuit TEST SWITCH tPLH, tPHL Open tPZL, tPLZ 6V at VCC = 3.3 ± 0.3V; VCC x 2 at VCC = 2.5 ± 0.2V; 1.8V to ± 0.15V tPZH, tPHZ GND FIGURE 4. Waveform for Inverting and Non-inverting Functions tr = tf ≤ 2.0ns, 10% to 90% FIGURE 5. 3-STATE Output High Enable and Disable Times for Low Voltage Logic tr = tf ≤ 2.0ns, 10% to 90% FIGURE 6. 3-STATE Output Low Enable and Disable Times for Low Voltage Logic tr = tf ≤ 2.0ns, 10% to 90% Symbol VCC 3.3V ± 0.3V 2.5V ± 0.2V Vmi 1.5V VCC/2 VCC/2 Vmo 1.5V VCC/2 VCC/2 Vx VOL + 0.3V VOL + 0.15V VOL + 0.15V Vy VOH − 0.3V VOH − 0.15V VOH − 0.15V 7 1.8 ± 0.15V www.fairchildsemi.com 74VCX16722 Low Voltage 22-Bit Register with 3.6V Tolerant Inputs and Outputs Physical Dimensions inches (millimeters) unless otherwise noted 64-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 6.1mm Wide Package Number MTD64 Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com www.fairchildsemi.com 8