CLD-DS36 Rev 2 Product family data sheet/ bINNING AND lABELING dOCUMENT Cree® XLamp® MT-G EasyWhite™ LEDs Product Description FEATURES The XLamp MT-G EasyWhite LED • maximizes lumen density, eliminates chromaticity binning, and enables luminaire and bulb manufacturers to deliver consistent color and high efficacy light output in a • • new, compact, multi-die package. Label Product with Characteristics. Cree Bin ............... Code, 2 Qty,Flux LotCharacteristics, #....................................... Standard temperatures 10 Order Codes and Bins................. 2 Wide Range of operating power Label with Customer Order Code,... 10 Relative Spectral Power - up to 25W Qty, Reel ID, PO#........................... Distribution............................... 3 10 85° C binning and Relative Luminous Flux vs Junction characterization Temperature.............................. 4 Cree EasyWhite color XLamp MT-G EasyWhite LEDs can • Two voltage options: 6V, 36V reduce LED-to-LED color variation • Low effective thermal to within a 2-step MacAdam ellipse, 94% smaller than the total area of the corresponding ANSI C78.377 color region. resistance: 1.5° C/W plications where high luminous flux display spot- WWW.CREE.COM/XLAMP lights, and other indoor general il- Current..................................... 5 Typical Spatial Distribution........... 6 • Wide viewing angle: 120° Brightness................................. 7 • Minimum 80 CRI at 2700 K and Performance Groups – 3000 K CCT Chromaticity.............................. 7 • Electrically neutral thermal path Performance Groups – Cree EasyWhite Color Temperatures ............................ 8 Bin and Order Code Format.......... 9 Standard Order Codes and Bins.... 9 small point source. Example applicommercial/retail Relative Luminous Flux vs High lumen density output is required from a single, cations include: LED retrofit bulbs, Electrical Characteristics.............. 4 • The XLamp MT-G EasyWhite LED is the perfect choice for lighting ap- TABLE OF CONTENTS Notes.......................................10 Applications Reflow Soldering Characteristics..11 • MR, PAR and other directional Mechanical Dimensions..............12 retrofit bulbs Tape and Reel...........................13 Commercial/residential direc- Packaging.................................14 lumination applications. • tional lighting • General indoor/outdoor illumination Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. the Cree logo and XLamp are registered trademarks and EasyWhite is a trademark of Cree, Inc. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/xlamp xlamp MT-G EasyWhite LEDs product Characteristics Characteristics Unit Viewing Angle (FWHM) Minimum Typical degrees Maximum 120 ESD Classification (HBM per Mil-Std-883D) Class 2 Effective Thermal Resistance, Junction to Solder-point °C/W 1.5 LED Junction Temperatures °C 150 DC Forward Current (6V) mA 1100 4000 DC Forward Current (36V) mA 185 700 Forward Voltage (6V, 1100 mA, 85° C) V 5.6 6.7 Forward Voltage (36V, 185 mA, 85° C) V 33.5 40.2 Temperature Coefficient of Voltage (6V) mV/°C -4.5 Temperature Coefficient of Voltage (36V) mV/°C -27 Reverse Voltage (6V) Reverse Current (6V, 36V) V -5 mA 0.1 Moisture Sensitivity Level Rating (MSL) MSL 1 Flux Characteristics, Standard Order Codes and Bins, 6 VolT MT-G (1100 mA, Tj =85° C) The following table provides several base order codes for 6 Volt XLamp MT-G EasyWhite LEDs. For a complete description of the order-code nomenclature, please reference page 9 of this document. Color CCT Range 4,000 K 3,500 K Standard CRI EasyWhite 3,000 K 2,700 K Base Order Codes Min Luminous Flux (lm) (Tj =85° C) 2-Step Order Code Chromaticity Region 4-Step Order Code Chromaticity Region Group Flux (lm) F0 480 G0 520 H0 560 MTGEZW-00-0000-0B00H040H MTGEZW-00-0000-0B00H040F E0 440 MTGEZW-00-0000-0B00E035H MTGEZW-00-0000-0B00E035F F0 480 G0 520 MTGEZW-00-0000-0B00G035H MTGEZW-00-0000-0B00G035F E0 440 MTGEZW-00-0000-0B00E030H MTGEZW-00-0000-0B00E030F F0 480 G0 520 MTGEZW-00-0000-0B00G030H MTGEZW-00-0000-0B00G030F D0 400 MTGEZW-00-0000-0B00D027H MTGEZW-00-0000-0B00D027F E0 440 F0 480 MTGEZW-00-0000-0B00F040H 40H 35H 30H 27H MTGEZW-00-0000-0B00G040H MTGEZW-00-0000-0B00F035H MTGEZW-00-0000-0B00F030H MTGEZW-00-0000-0B00E027H MTGEZW-00-0000-0B00F040F 40F 35F 30F 27F MTGEZW-00-0000-0B00F027H MTGEZW-00-0000-0B00G040F MTGEZW-00-0000-0B00F035F MTGEZW-00-0000-0B00F030F MTGEZW-00-0000-0B00E027F MTGEZW-00-0000-0B00F027F Notes: • Cree maintains a tolerance of ±7% on flux and power measurements and ±2 on CRI measurements • Minimum CRI for EasyWhite color temperatures 27F, 27H, 30F, 30H is 80 • Minimum CRI for EasyWhite color temperatures 35F, 35H, 40F, 40H is 77 • Typical CRI for EasyWhite color temperatures 35F, 35H, 40F, 40H is 80 Copyright © 2011 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks and EasyWhite is a trademark of Cree, Inc. of Cree, Inc. 2 xlamp MT-G EasyWhite LEDs Flux Characteristics, Standard Order Codes and Bins, 36 VolT MT-G (185 mA, Tj =85° C) The following table provides several base order codes for 36 Volt XLamp MT-G EasyWhite LEDs. For a complete description of the order-code nomenclature, please reference page 9 of this document. Color Base Order Codes Min Luminous Flux (lm) (Tj =85° C) CCT Range 2-Step Order Code 4-Step Order Code Chromaticity Region Chromaticity Region Group Flux (lm) F0 480 G0 520 H0 560 MTGEZW-00-0000-0N00H040H MTGEZW-00-0000-0N00H040F E0 440 MTGEZW-00-0000-0N00E035H MTGEZW-00-0000-0N00E035F F0 480 G0 520 MTGEZW-00-0000-0N00G035H MTGEZW-00-0000-0N00G035F E0 440 MTGEZW-00-0000-0N00E030H MTGEZW-00-0000-0N00E030F F0 480 G0 520 MTGEZW-00-0000-0N00G030H MTGEZW-00-0000-0N00G030F D0 400 MTGEZW-00-0000-0N00D027H MTGEZW-00-0000-0N00D027F E0 440 F0 480 4,000 K 3,500 K Standard CRI EasyWhite 3,000 K 2,700 K MTGEZW-00-0000-0N00F040H 40H 35H 30H 27H MTGEZW-00-0000-0N00G040H MTGEZW-00-0000-0N00F035H MTGEZW-00-0000-0N00F030H MTGEZW-00-0000-0N00E027H MTGEZW-00-0000-0N00F040F 40F MTGEZW-00-0000-0N00G040F 35F MTGEZW-00-0000-0N00F035F 30F MTGEZW-00-0000-0N00F030F 27F MTGEZW-00-0000-0N00E027F MTGEZW-00-0000-0N00F027H MTGEZW-00-0000-0N00F027F Notes: • Cree maintains a tolerance of ±7% on flux and power measurements and ±2 on CRI measurements • Minimum CRI for EasyWhite color temperatures 27F, 27H, 30F, 30H is 80 • Minimum CRI for EasyWhite color temperatures 35F, 35H, 40F, 40H is 77 The following represents typical spectral output each die of40H the MT-G • Typical CRI for graph EasyWhite color temperatures 35F,of35H, 40F, is 80 Relative Spectral Power Distribution White This is XR-E data, and MC-E Data… Relative Spectral Power Distribution (6V, 1100 mA; 36V, 185 mA; TJ=85°C; 3000K CCT) The following graph represents typical spectral output of the XLamp MT-G EasyWhite LED. Relative Spectral Power (%) 100 80 60 40 20 0 400 450 500 550 600 650 700 750 Wavelength (nm) Copyright © 2011 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks and EasyWhite is a trademark of Cree, Inc. of Cree, Inc. 3 xlamp MT-G EasyWhite LEDs Relative Flux Output vs. Junction Temperature (If = 1100 mA, or 183.33 if @ 36V) The following graph represents typical performance each LED die in the XLamp MT-G (6V, 1100 ma; 36V, 185 mA) Relative Luminous Flux vsofJunction Temperature The following graph represents typical performance of the XLamp MT-G EasyWhite LED. Relative Luminous Flux 120% 100% 80% 60% 40% 20% 0% 20 40 60 80 100 120 140 Junction Temperature (ºC) Electrical Characteristics (Tsp Electrical Characteristics (T ==85ºC) 85°C) J 6V 4000 3500 Current (mA) 3000 2500 MT-G 6V 2000 1500 1000 500 0 5 5.25 5.5 5.75 6 6.25 Forward Voltage V Copyright © 2011 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks and EasyWhite is a trademark of Cree, Inc. of Cree, Inc. 4 36V xlamp MT-G EasyWhite LEDs 700 600 Current (mA) 500 400 MT-G 36V 300 200 100 0 31.00 32.00 33.00 34.00 35.00 36.00 37.00 38.00 Forward Voltage V Relative Intensity vs. Current (Tsp = 85ºC) Relative Luminous Flux vs Current (TJ = 85°C) Relative Luminous Flux (%) 300% 250% 200% 150% MT-G 6V 100% 50% 0% 0 500 1000 1500 2000 2500 3000 3500 4000 Forward Current, Pulsed (mA) Copyright © 2011 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks and EasyWhite is a trademark of Cree, Inc. of Cree, Inc. 5 f @ 36V) xlamp MT-G EasyWhite LEDs Relative Luminous Flux (%) 300% 250% 200% 150% MT-G 36V 100% 50% 0% 0 100 200 300 400 500 600 700 Forward Current, Pulsed (mA) Typical Spatial Distribution Spatial Distribution The following graph represents typical performance of the XLamp MT-G EasyWhite LED. Relative Luminous Intensity (%) 100 80 60 40 20 0 -90 -60 -30 0 30 60 90 Angle (º) Copyright © 2011 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks and EasyWhite is a trademark of Cree, Inc. of Cree, Inc. 6 xlamp MT-G EasyWhite LEDs Performance Groups – Brightness (TJ = 85°C) XLamp MT-G EasyWhite LEDs are tested for luminosity and placed into one of the following bins. Group Code Min. Luminous Flux @ 1100 mA, 6V; @185 mA, 36V Max. Luminous Flux @ 1100 mA, 6V; @185 mA, 36V D0 400 440 E0 440 480 F0 480 520 G0 520 560 H0 560 600 J0 600 650 Performance Groups – Chromaticity (TJ = 85°C) XLamp MT-G EasyWhite LEDs are tested for chromaticity and placed into one of the regions defined by the following bounding coordinates. EasyWhite Color Temperatures – 4-Step EasyWhite Color Temperatures – 2-Step Code Code 40F 35F 30F 27F CCT 4000 K 3500 K 3000 K 2700 K x y 0.3744 0.3685 0.3782 0.3837 x y 0.3784 0.3741 0.3804 0.3818 0.3912 0.3917 0.3863 0.3758 0.3867 0.3857 0.3844 0.3981 0.3800 0.3778 0.4030 0.3857 0.4040 0.3966 0.4186 0.4037 0.4061 0.3941 0.4132 0.3976 0.4116 0.4242 0.3865 0.4099 0.3890 0.3919 0.4291 0.3973 0.4322 0.4096 0.4333 0.4062 0.4449 0.4141 0.4395 0.4084 0.4359 0.3960 0.4351 0.3994 0.4475 0.3994 0.4528 0.4046 0.4573 0.4178 0.4578 0.4138 0.4695 0.4207 0.4638 0.4152 0.4589 0.4021 0.4586 0.4060 40H 35H 30H 27H CCT 4000 K 3500 K 3000 K 2700 K Copyright © 2011 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks and EasyWhite is a trademark of Cree, Inc. of Cree, Inc. 7 xlamp MT-G EasyWhite LEDs Cree EasyWhite Color Temperatures Plotted on the 1931 CIE Curve (TJ = 85°C) 0.45 0.44 0.43 3000K 3500K 0.42 4000K 0.41 CCy 2700K ANSI C78.377 Quadrangle EasyWhite "F" (4-Step) Chromaticity Regions 4500K 27F 0.40 30F 0.39 35F 0.38 40F 0.37 0.36 0.45 0.43 0.49 0.48 0.47 0.46 0.45 0.44 0.43 CCx 2700K ANSI C78.377 Quadrangle EasyWhite "H" (2-Step) Chromaticity Regions 0.44 3000K 3500K 0.42 4000K 0.41 CCy 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 27H 4500K 30H 0.40 35H 0.39 0.38 40H 0.37 0.36 0.49 0.48 0.47 0.46 0.45 0.44 CCx 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 Copyright © 2011 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks and EasyWhite is a trademark of Cree, Inc. of Cree, Inc. 8 xlamp MT-G EasyWhite LEDs Bin And Order Code Format Bin codes and order codes are configured as follows: Order CodeBin Code Series MTG = MT-G Series MTG = MT-G Internal code Internal code Flux bin Internal code CRI Specification H = 80 min CRI SSSCCC-BB-WWW-FF-NNRAAAA E = 77 min CRI Kit code SSSCCC-BB-HHHH-NNNNNNNNN Vf class: B0 = 6-V class N0 = 36-V class Reel size 0 = 500 (standard) 1 = 100 (nonstandard) Internal Code Vf class: B0 = 6-V class N0 = 36-V class Chromaticity bin Color EZW = EasyWhite Standard Order Codes and Bins (XLamp MT-G EasyWhite) Color EZW = EasyWhite XLamp MT-G EasyWhite LED Standard Order Codes Min. Luminous Flux (lm) @ Tj=85°C, 6V, 1100 mA @ Tj=85°C, 36V, 185 mA Group Chromaticity Regions 6V Order Code 27F MTGEZW-00-0000-0B00D027F MTGEZW-00-0000-0N00D027F 27H MTGEZW-00-0000-0B00D027H MTGEZW-00-0000-0N00D027H 36V Order Code Flux (lm) EasyWhite D0 E0 F0 G0 H0 400 440 480 520 560 27F MTGEZW-00-0000-0B00E027F MTGEZW-00-0000-0N00E027F 27H MTGEZW-00-0000-0B00E027H MTGEZW-00-0000-0N00E027H 30F MTGEZW-00-0000-0B00E030F MTGEZW-00-0000-0N00E030F 30H MTGEZW-00-0000-0B00E030H MTGEZW-00-0000-0N00E030H 35F MTGEZW-00-0000-0B00E035F MTGEZW-00-0000-0N00E035F 35H MTGEZW-00-0000-0B00E035H MTGEZW-00-0000-0N00E035H 27F MTGEZW-00-0000-0B00F027F MTGEZW-00-0000-0N00F027F 27H MTGEZW-00-0000-0B00F027H MTGEZW-00-0000-0N00F027H 30F MTGEZW-00-0000-0B00F030F MTGEZW-00-0000-0N00F030F 30H MTGEZW-00-0000-0B00F030H MTGEZW-00-0000-0N00F030H 35F MTGEZW-00-0000-0B00F035F MTGEZW-00-0000-0N00F035F 35H MTGEZW-00-0000-0B00F035H MTGEZW-00-0000-0N00F035H 40F MTGEZW-00-0000-0B00F040F MTGEZW-00-0000-0N00F040F 40H MTGEZW-00-0000-0B00F040H MTGEZW-00-0000-0N00F040H 30F MTGEZW-00-0000-0B00G030F MTGEZW-00-0000-0N00G030F 30H MTGEZW-00-0000-0B00G030H MTGEZW-00-0000-0N00G030H 35F MTGEZW-00-0000-0B00G035F MTGEZW-00-0000-0N00G035F 35H MTGEZW-00-0000-0B00G035H MTGEZW-00-0000-0N00G035H 40F MTGEZW-00-0000-0B00G040F MTGEZW-00-0000-0N00G040F 40H MTGEZW-00-0000-0B00G040H MTGEZW-00-0000-0N00G040H 40F MTGEZW-00-0000-0B00H040F MTGEZW-00-0000-0N00H040F 40H MTGEZW-00-0000-0B00H040H MTGEZW-00-0000-0N00H040H Copyright © 2011 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks and EasyWhite is a trademark of Cree, Inc. of Cree, Inc. 9 xlamp MT-G EasyWhite LEDs Notes Moisture Sensitivity In testing, Cree has found XLamp MT-G EasyWhite LEDs to have unlimited floor life in conditions ≤30ºC / 85% relative humidity (RH). Moisture testing included a 168 hour soak at 85ºC / 85% RH followed by 3 reflow cycles, with visual and electrical inspections at each stage. RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/ EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim WARNING. Do not look at exposed LED lamps in operation. Eye injury can result. For more information about LEDs and eye safety, please refer to the Cree LED Eye Safety Application Note (http://www.cree.com/products/pdf/XLamp_EyeSafety.pdf). Copyright © 2011 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks and EasyWhite is a trademark of Cree, Inc. of Cree, Inc. 10 xlamp MT-G EasyWhite LEDs Reflow Soldering Characteristics In testing, Cree has found XLamp MT-G EasyWhite LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of solder paste used. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment. Profile Feature Lead-Based Solder Lead-Free Solder 3°C/second max. 3°C/second max. Preheat: Temperature Min (Tsmin) 100°C 150°C Preheat: Temperature Max (Tsmax) 150°C 200°C 60-120 seconds 60-180 seconds 183°C 217°C 60-150 seconds 60-150 seconds 215°C 260°C 10-30 seconds 20-40 seconds 6°C/second max. 6°C/second max 6 minutes max. 8 minutes max. Average Ramp-Up Rate (Tsmax to Tp) Preheat: Time (tsmin to tsmax) Time Maintained Above: Temperature (TL) Time Maintained Above: Time (tL) Peak/Classification Temperature (Tp) Time Within 5°C of Actual Peak Temperature (tp) Ramp-Down Rate Time 25°C to Peak Temperature Note: All temperatures refer to the topside of the package, measured on the package body surface. Copyright © 2011 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks and EasyWhite is a trademark of Cree, Inc. of Cree, Inc. 11 6 5 5 4 4 NOTICE FIDENTIAL. THIS PLOT AND THE INFORMATION CE D PLOT WITHIN ARE THEINFORMATION PROPRIETARY AND S AND THE TIAL INFORMATION OF CREE, INC. THIS PLOT HE PROPRIETARY AND BE COPIED, REPRODUCED OR DISCLOSED TO ANY ION OF CREE, INC. THIS PLOT RIZED PERSON WITHOUTTHETO WRITTEN CONSENT RODUCED OR DISCLOSED ANY NC. WITHOUTTHE WRITTEN CONSENT 3 3 2 2 REV A B A B 1 1 REVISONS REVISONS REV BY DESCRIPTION DESCRIPTION INITIAL RELEASE INITIAL RELEASE CHANGED SOLDER PAD VIEW CHANGED SOLDER PAD VIEW ADDED STENCIL VIEW ADDED STENCIL VIEW CHANGED OVERALL DIM TO MATCH CUT LENGTH AND WIDTH BY DATE DATE APP'D APP'D DC 10/8/10 DC 10/8/10 DC 1/11/11 DC 1/11/11 DC 2/18/11 DC 2/18/11 DC 3/25/11 xlamp MT-G EasyWhite LEDs C C D D Mechanical Dimensions 6 5 4 NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUTTHE WRITTEN CONSENT OF CREE INC. MT-G 6V 4.85 ±.25 4.85 ±.25 8.90 .650 6D 3 All measurements are ±.13 mm unless otherwise indicated. 8.90 9.113 5 .650 4 2 INITIAL RELEASE 8.90 8.90 4.85 ±.25 8.900 .500 .500 8.90 .889 .889 1.090 1.090 8.839 8.839 .889 .889 .650 6.0006.000 1.090 1.090 .937 8.072 8.900 6.198 8.072 .950 4.85 ±.25 .500 .500 1.722 1.722 3.175 3.175 6.000 R4.100 .937 8.900 .500 B SOLDER ECOMMENDED PC BOARD SOLDER PAD ED PC BOARD PAD .889 .889 Phone313-5300 (919) 313-5300 Phone (919) Fax313-5558 (919) 313-5558 Fax (919) SURFACE1.6 FINISH: 1.6 SURFACE FINISH: 5 4 4 8.900 TITLE TIGER OUTLINE TIGER 91919191 OUTLINE 1.090 1.090 6.000 5 4600 Drive Silicon Drive 4600 Silicon Durham, N.C 27703 Durham, N.C 27703 8.839 .500 6 DATE DATE DRAWN BY UNLESS OTHERWISE SPECIFIED UNLESS OTHERWISE SPECIFIED D. CRONIN 10/8/10 10/8/10 DIMENSIONS DIMENSIONS ARE IN ARE IN D. CRONIN CHECK DATE CHECK DATE MILLIMETERS AND AFTER FINISH. MILLIMETERS AND AFTER FINISH. 1.072 1.072 TOLERANCE UNLESS SPECIFIED: TOLERANCE UNLESS SPECIFIED: .25 APPROVEDAPPROVEDDATE DATE .XX ± .XX .25 ± 1.905 1.905 .125 TITLE .XXX ± .XXX .125 ± X°.5 ° ± .5 ° X° ± 1.905 1.905 THIRD ANGLE PROJECTION THIRD ANGLE PROJECTION MATERIAL MATERIAL SHEET METAL PARTS ONLY FOR SHEETFOR METAL PARTS ONLY .X1.5 ± 1.5 .X ± SIZE .75 .XX ± .XX .75 ± RECOMMENDED PATTERN RECOMMENDED STENCILSTENCIL PATTERN .25 FINAL PROTECTIVE FINAL FINISH PROTECTIVE FINISH .XXX ± .XXX .25 ± X°.5 ° ± .5 ° X° ± .950 3 3 SCALE 2 2 .937 2610-00011 2610-00011 SCALE SHEET SHEETOF 9.000 9.000 REV. REV. C D OF 1 /1 1 /1 1 1 3.175 .889 1.090 6.000 DRAWING NO. DRAWING NO. SIZE C C 8.839 .889 .500 A .500 DRAWN BY .950 A 8.90 R4.100 .937 B 3.175 3.175 6.198 B .937 9.113 8.900 8.90 .650 R4.100 R4.100 MT-G36V 6.000 C DESCRIPTION A 8.90 C C REVISONS 9.113 6.000 .950 REV 8.90 8.900 8.90 .950 3 NOTICE IDENTIAL. THIS PLOT AND THE INFORMATION WITHIN ARE THE PROPRIETARY AND AL INFORMATION OF CREE, INC. THIS PLOT E COPIED, REPRODUCED OR DISCLOSED TO ANY ZED PERSON WITHOUTTHE WRITTEN CONSENT C. 9.113 D 8.900 8.072 1.090 6.198 1.722 .937 3.175 3.175 .937 8.900 A 8.072 6.198 1.722 1.072 .950 .950 1.905 3.175 RECOMMENDED PC BOARD SOLDER PAD 1.905 6 5 4 1.905 COMMENDED PC BOARD SOLDER PAD THIRD ANGLE PROJECTION UNLESS OTHERWISE SPECIFIED RECOMMENDED STENCIL PATTERN 1.072 .950 6 1.905 .937 THIRD ANGLE PROJECTION RECOMMENDED STENCIL PATTERN DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX ± .25 .XXX ± .125 X° ± .5 ° FOR SHEET METAL PARTS ONLY .X ± 1.5 .XX ± .75 .XXX ± .25 X° ± .5 ° DATE DRAWN BY D. CRONIN 10/8/10 CHECK DATE APPROVED DATE 4 3 FOR SHEET M .X .XX .XXX X° SURFACE FIN 3TITLE 36V MT-G MATERIAL SIZE FINAL PROTECTIVE FINISH C SCALE Copyright © 2011 Cree logo and XLamp are registered trademarks 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the SURFACE FINISH: 1.6 9.000 and EasyWhite is a trademark of Cree, Inc. of Cree, Inc. 5 UNLESS OTHE DIMENSIO MILLIMETERS A TOLERANCE U .XX .XXX X° 2 12 DRAWING NO. 261 6 5 4 3 2 D 1 REVISONS NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUTTHE WRITTEN CONSENT OF CREE INC. xlamp MT-G EasyWhite LEDs REV BY DESCRIPTION DATE APP'D Tape and Reel D 1.5± .1 User Feed Direction 4±.10 12±.1 END 1.75 ±.10 START CATHODE SIDE 5.25 16 +.3 -.0 C 9.4 C ANODE SIDE 6 Trailer 5 NOTICE 160mm (min) of CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION empty pockets CONTANED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION sealed OF CREE, INC. THIS PLOT with tape MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY (15 pockets min.) UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT OF CREE INC. 4 3 Loaded Pockets (500 Lamps) 2 1 2400-00009 Leader 400mm (min) of empty pockets sealed with tape (35 pockets min.) INDEX QTY ITEM 1 2 1 2 2400-00009-CORE 2400-00009-REEL COMMENTS D D B B 12.4 +.2 .0 MEASURED AT HUB C C UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX ± .25 .XXX ± .125 X° ± .5 ° 16.4 THIRD ANGLE PROJECTION +0.2 FOR SHEET METAL PARTS ONLY .X ± 1.5 .0 .XX ± .75 .25 MEASURED.XXX AT±±HUB X° .5 ° A 330 +.25 -.75 SURFACE FINISH: 6 5 4 DATE DRAWN BY D. CRONIN 4600 Silicon Drive Durham, N.C 27703 1/28/11 CHECK DATE -- Phone (919) 313-5300 -- APPROVED Fax (919) 313-5558 -- TITLE MTG LOADING SPEC MATERIAL 1.9±.4 -- SIZE FINAL PROTECTIVE FINISH -- 1.6 3 A DATE -- REV. DRAWING NO. C SCALE 2402-00016 SHEET 3.000 2 A OF 1 /1 21 ±.4 1 13.1 ±.2 B B 12.4 +1.0 -.5 MEASURED AT EDGE 60° 60° REVISONS REV A THIRD ANGLE PROJECTION UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX ± .01 .XXX ± .005 X° ± .5 ° FOR SHEET METAL PARTS ONLY .X ± .06 .XX ± .03 .XXX ± .010 X° ± .5 ° SURFACE FINISH: 6 5 4 3 63 BY DESCRIPTION DATE APP'D DATE DRAWN BY D. CRONIN 4600 Silicon Drive Durham, N.C 27703 09/29/09 CHECK DATE -- Phone (919) 313-5300 -- Fax (919) 313-5558 A DATE APPROVED -- -- MATERIAL ANTI-STATIC HIPS TITLE REEL, 13" X 12MM, 3 PIECE SNAP SIZE FINAL PROTECTIVE FINISH 2 SCALE C 0.500 REV. DRAWING NO. 2400-00009 SHEET 1 Copyright © 2011 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks and EasyWhite is a trademark of Cree, Inc. of Cree, Inc. 13 A OF 1 /1 xlamp MT-G EasyWhite LEDs Dessicant Desiccant (inside bag) (inside bag) Packaging Humidity Indicator Humidity Indicator Card (inside bag)bag) (inside Vacuum-Sealed Vacuum-Sealed Vacuum-Sealed Moisture Barrier Bag Vacuum-Sealed Moisture BarrierBarrier Bag Moisture Bag Moisture Barrier Bag Label CREE Binwith Code Cree Bin Label with Cree CREE Bin Code & Barcode Label Code, Qty, Lot # Bin & Barcode Label Code, Qty, Lot # Label with Cree Bin Label with Customer Label with Label with P/N, Qty,Qty, Lot #,Customer POCree # # Bin Code, Lot P/N, Qty, Lot #, PO## Code, Qty, Lot Patent Label Patent Label Label with Customer Order Label with Customer Order Code, Qty, Reel ID, PO # Code, Qty, Reel ID, PO # Label with Customer Order Code, Qty, Reel ID, PO# Label with Cree Bin Code, Qty, Lot # Copyright © 2011 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks and EasyWhite is a trademark of Cree, Inc. of Cree, Inc. 14