MTH-50 / MTV-50 Two-Way Power Dividers, 1 - 100 MHz and 40 - 400 MHz Rev. V3 Features TO-5-1 • • • • • Ideal for High Density Packaging High Isolation: 30 dB Min. VSWR: 1.3:1 Max. Impedance: 50 Ohms Nominal Maximum Power Rating or Input Power: 1 Watt Max. • Internal Load Dissipation: 0.05 Watts Max. • MIL-STD-883 Screening Available Description A Power Divider is ideally a lossless reciprocal device which can also perform vector summation of two or more signals and thus is sometimes called a power combiner or summer. Pin Configuration Pin No. Function Pin No. Function A Out C Out B In MTH-50 Electrical Specifications1: TA = -55°C to +85°C Parameter Test Conditions Frequency Units Min Typ Max Frequency — 1 - 100 MHz — — — Insertion Loss Less Coupling 1 - 100 MHz dB — — 0.5 Isolation — 1 - 100 MHz dB 30 — — Amplitude Balance — 1 - 100 MHz dB — — 0.1 Phase Balance — 1 - 100 MHz ° — — 1.0 VSWR — 1 - 100 MHz Ratio — — 1.3:1 MTV-50 Electrical Specifications1: TA = -55°C to +85°C Parameter Test Conditions Frequency Units Min Typ Max Frequency — 40 - 400 MHz MHz — — — Insertion Loss Less Coupling 40 - 400 MHz dB — — 0.6 Isolation — 40 - 400 MHz dB 30 — — Amplitude Balance — 40 - 400 MHz dB — — 0.2 Phase Balance — 40 - 400 MHz ° — — 2.0 VSWR — 40 - 400 MHz Ratio — — 1.3:1 1. All specification apply with 50 ohm source and load impedance. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MTH-50 / MTV-50 Two-Way Power Dividers, 1 - 100 MHz and 40 - 400 MHz Rev. V3 Typical Performance Curves Insertion Loss - Ports 2 - 3, 2 - 1 M T H- 50 M T V - 50 1.4 80 1.2 70 Isolation (dB) Insertion Loss (dB) M T H- 50 Isolation - Ports 1 - 3 1.0 0.8 0.6 0.4 M T V - 50 60 50 40 30 20 0.2 10 0.0 0.5 1 2 5 10 20 50 100 200 300 400 500 600 0.5 1 2 5 10 20 50 100 200 300 400 500 600 F requency (M H z) F reque nc y ( M H z) VSWR Ordering Information M T H- 50 I np ut M T V - 50 Inp ut M T H- 50 O ut p ut M T V - 50 O ut p ut Part Number Package MTH-50 PIN TO-5-1 MTV-50 PIN TO-5-1 2.8 2.6 2.4 VSWR 2.2 2 1.8 1.6 1.4 1.2 1 0.5 1 2 5 10 20 50 100 200 300 400 500 600 F re que nc y ( M H z) 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.