MMD MTH2050AS 5 x 3.2 ceramic smd oscillator Datasheet

MTH Series – 5 x 3.2 Ceramic SMD Oscillator
¾
Low Profile SMD Package
¾
Hermetically Sealed
¾
Stand-by Available
¾
Wide Frequency Range
ELECTRICAL SPECIFICATIONS:
Frequency Range
Temperature Stability*
Aging (+25°C ±3°C)
Operating Temperature Range
Storage Temperature Range
Supply Voltage (±10%)
+1.80 VDC
6mA
7mA
15mA
25mA
1.544MHZ to 9.999MHZ
10.000MHZ to 35.999MHZ
35.000MHZ to 49.999MHZ
50.000MHZ to 133.000MHZ
Supply Current
Output Type
Symmetry (50% of waveform)
Rise/Fall Time (10% to 90% of Supply Voltage)
Load
Start-up Time
* Inclusive of Temperature., Load, Voltage and Aging
Pin 1 Function
5nSec max
1.544MHZ to 133.000MHZ
(See Part Number Guide for Options)
±5ppm for first year
(See Part Number Guide for Options)
-55°C to +125°C
+2.50 VDC
+3.30 VDC
7mA
8mA
8mA
10mA
20mA
25mA
30mA
35mA
HCMOS
40%/60% (45%/55% option)
6nSec max
7nSec max
15pF
10mSec max
+5.00 VDC
15mA
20mA
35mA
40mA
5nSec max
Vih = 70% of Vdd min to Enable Output
Vil = 30% max or grounded to Disable Output (High Impedance)
10µA max
Tri-state Operation
Standby Current
MECHANICAL DIMENSIONS:
5.20 [.205]
MAX
1.60 [.063]
MAX
2.54 [.100]
3
3.40 [.134]
MAX
4
1.20 [.047]
2
2.54 [.100]
1.10 [.043]
2.20 [.087]
1
1.40 [.055]
1.20 [.047]
DIMENSIONS IN BRACKETS ARE IN INCHES
EXTERNAL BYPASS CAPACITOR IS RECOMMENDED
PIN CONNECTIONS
PIN 1
TRI-STATE OR
STANDBY
PIN 2
PIN 3
PIN 4
CASE GROUND
OUTPUT
SUPPLY VOLTAGE
RECOMMENDED
LAND PATTERN
PART NUMBER GUIDE:
MTH
H
5 x 3.2 Ceramic SMD 4 Pads
Supply Voltage
5 = +5.0VDC
3 = +3.3VDC
2 = +2.5VDC
1 = +1.8VDC
Frequency
Stability
025 = ±25 ppm
050 = ±50 ppm
100 = ±100 ppm
Frequency
Symmetry
Blank = 40/60%
A = 45/55%
Operating Temperature
Blank = 0°C to +70°C
27 = -20°C to +70°C
48 = -40°C to +85°C
Pin 1 Connection
H = Tri-state
S = Standby
Value Added Options
Blank = No Added Options
T = Tape and Reel
Please Consult with MMD Sales Department for any other Parameters or Options
MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688
Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com
[email protected]
Specifications subject to change without notice
Revision 03/01/07 I
Similar pages