MURF3005PT THRU MURF3060PT SUPER FAST RECOVERY SILICON RECTIFIER Reverse Voltage - 50 to 600 Volts Forward Current - 30.0 Ampere FEATURES TO-3P 15.8± 0.2 5.0± 0.15 8.0± 0.2 21± 0.5 Super-Fast Switching Low Forward Voltage Drop Low Reverse Leakage Current High Surge Current Capability Plastic Material has UL Flammability Classification 94V-O 4.9± 0.25 6.5± 0.3 Glass Passivated Die Construction 2.0± 0.15 3.6± 0.15 PIN 1 MECHANICAL DATA 2 3 2.4± 0.2 20.4± 0.4 Case: TO-3P, Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-750, Method 2026 Polarity: See Diagram Weight: 5.6 grams (approx.) Mounting Position: Any Mounting Torque: 11.5 cm-kg (10 in-lbs) Max. 2.2± 0.15 3.0± 0.1 1.2± 0.15 0.6± 0.1 5.4± 0.15 Dimensions in millimeters + PIN 1 PIN 3 - Case, PIN 2 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. Characteristic Symbol Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage MURF MURF 3005PT 3010PT MURF 3015PT MURF 3020PT MURF 3030PT MURF MURF 3040PT 3060PT Unit VRRM VRWM VR 50 100 150 200 300 400 600 V VR(RMS) 35 70 105 140 210 280 420 V Average Rectified Output Current @TC = 100°C IO 30 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 300 A Forward Voltage V FM @IF = 15.0A Peak Reverse Current @TA = 25°C At Rated DC Blocking Voltage @TA = 100°C 0.975 1.3 1.7 10 500 IRM V µA Reverse Recovery Time (Note 1) trr 35 50 nS Typical Junction Capacitance (Note 2) Cj 150 120 pF Operating and Storage Temperature Range Tj, TSTG Note: 1. Measured with IF = 0.5A, IR = 1.0A, IRR = 0.25A. See figure 5. 2. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. -65 to +150 °C MURF3005PT THRU MURF3060PT RATINGS AND CHARACTERISTIC CURVES 100 IF, INSTANTANEOUS FORWARD CURRENT (A) I(AV), AVERAGE FORWARD CURRENT (A) 30 24 18 12 6 0 0 50 100 3005 - 3020 3040 - 3060 1.0 Pulse width = 300µ s 2% duty cycle 0.1 0 150 TC, CASE TEMPERATURE ( °C) Fig. 1 Forward Current Derating Curve 50. 01. 51. V F, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 300 400 Tj = 25° C f = 1.0MHz 8.3 ms single half-sine-wave JEDEC method Cj, CAPACITANCE (pF) IFSM , PEAK FORWARD SURGE CURRENT (A) 3030 - 3040 10 200 100 3005PT 3040PT 100 3060PT 10 0 1 100 10 0.1 1.0 10 V R, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance NUMBER OF CYCLES AT 60Hz Fig. 3 Maximum Non-Repetitive Surge Current trr +0.5A 50Ω NI (Non-inductive) 10Ω NI Device Under Test (-) 0A (+) Pulse Generator (Note 2) 50V DC Approx (-) 1.0Ω NI Oscilloscope (Note 1) -0.25A (+) Notes: 1. Rise Time = 7.0ns max. Input Impedance = 1.0M Ω, 22pF. 2. Rise Time = 10ns max. Input Impedance = 50 Ω. -1.0A Set time base for 5/10ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit 100