MURS120T3G Series, SURS8120T3G Series Surface Mount Ultrafast Power Rectifiers MURS105T3G, MURS110T3G, MURS115T3G, MURS120T3G, MURS140T3G, MURS160T3G, SURS8105T3G, SURS8110T3G, SURS8115T3G, SURS8120T3G, SURS8140T3G, SURS8160T3G http://onsemi.com ULTRAFAST RECTIFIERS 1.0 AMPERE, 50−600 VOLTS Ideally suited for high voltage, high frequency rectification, or as free wheeling and protection diodes in surface mount applications where compact size and weight are critical to the system. Features • • • • • • • Small Compact Surface Mountable Package with J−Bend Leads Rectangular Package for Automated Handling High Temperature Glass Passivated Junction Low Forward Voltage Drop (0.71 to 1.05 V Max @ 1.0 A, TJ = 150°C) AEC−Q101 Qualified and PPAP Capable SURS8 Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements These are Pb−Free Packages Mechanical Characteristics: • Case: Epoxy, Molded • Weight: 95 mg (Approximately) • Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable • Lead and Mounting Surface Temperature for Soldering Purposes: • • 260°C Max. for 10 Seconds Polarity: Polarity Band Indicates Cathode Lead ESD Rating: ♦ Human Body Model = 3B (> 8 kV) ♦ Machine Model = C (> 400 V) SMB CASE 403A MARKING DIAGRAM AYWW U1x G G A Y WW U1 = = = = Assembly Location* Year Work Week Device Code x = A, B, C, D, G, or J G = Pb−Free Package (Note: Microdot may be in either location) * The Assembly Location code (A) is front side optional. In cases where the Assembly Location is stamped in the package bottom (molding ejecter pin), the front side assembly code may be blank. ORDERING INFORMATION See detailed ordering and shipping information in the table on page 2 of this data sheet. DEVICE MARKING INFORMATION See general marking information in the device marking table on page 2 of this data sheet. © Semiconductor Components Industries, LLC, 2013 May, 2013 − Rev. 12 1 Publication Order Number: MURS120T3/D MURS120T3G Series, SURS8120T3G Series MAXIMUM RATINGS MURS/SURS8 Symbol 105T3 110T3 115T3 Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 50 100 150 Average Rectified Forward Current IF(AV) 1.0 @ TL = 155°C 2.0 @ TL = 145°C 1.0 @ TL = 150°C 2.0 @ TL = 125°C A Non−Repetitive Peak Surge Current, (Surge applied at rated load conditions halfwave, single phase, 60 Hz) IFSM 40 35 A Rating Operating Junction Temperature TJ 120T3 140T3 160T3 Unit 200 400 600 V *65 to +175 °C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. THERMAL CHARACTERISTICS MURS/SURS8 Rating Symbol Thermal Resistance Junction−to−Lead (TL = 25°C) 105T3 115T3 110T3 RqJL 120T3 140T3 160T3 Unit °C/W 13 ELECTRICAL CHARACTERISTICS Maximum Instantaneous Forward Voltage (Note 1) (iF = 1.0 A, TJ = 25°C) (iF = 1.0 A, TJ = 150°C) vF Maximum Instantaneous Reverse Current (Note 1) (Rated DC Voltage, TJ = 25°C) (Rated DC Voltage, TJ = 150°C) iR Maximum Reverse Recovery Time (iF = 1.0 A, di/dt = 50 A/ms) (iF = 0.5 A, iR = 1.0 A, IR to 0.25 A) trr Maximum Forward Recovery Time (iF = 1.0 A, di/dt = 100 A/ms, Rec. to 1.0 V) tfr Typical Peak Reverse Recovery Current (IF = 1.0 A, di/dt = 50 A/ms) IRM 0.875 0.71 1.25 1.05 2.0 50 5.0 150 35 25 75 50 25 50 0.75 1.60 V mA ns ns A 1. Pulse Test: Pulse Width = 300 ms, Duty Cycle v 2.0%. DEVICE MARKING AND ORDERING INFORMATION Marking Package Shipping† MURS105T3G, SURS8105T3G U1A SMB (Pb−Free) 2,500 Units / Tape & Reel MURS110T3G, SURS8110T3G U1B SMB (Pb−Free) 2,500 Units / Tape & Reel MURS115T3G, SURS8115T3G U1C SMB (Pb−Free) 2,500 Units / Tape & Reel MURS120T3G, SURS8120T3G U1D SMB (Pb−Free) 2,500 Units / Tape & Reel MURS140T3G, SURS8140T3G U1G SMB (Pb−Free) 2,500 Units / Tape & Reel MURS160T3G, SURS8160T3G U1J SMB (Pb−Free) 2,500 Units / Tape & Reel Device †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. http://onsemi.com 2 MURS120T3G Series, SURS8120T3G Series MURS105T3G, MURS110T3G, MURS115T3G, MURS120T3G, SURS8105T3G, SURS8110T3G, SURS8115T3G, SURS8120T3G 10 IR, REVERSE CURRENT (m A) 7.0 5.0 3.0 i , INSTANTANEOUS FORWARD CURRENT (AMPS) F 175°C 100°C 2.0 TC = 25°C 1.0 80 40 20 8.0 4.0 2.0 0.8 0.4 0.2 TJ = 175°C TJ = 100°C 0.08 0.04 0.02 0.008 0.004 0.002 0.7 TJ = 25°C 0 20 40 0.5 60 80 100 120 140 160 180 200 VR, REVERSE VOLTAGE (VOLTS) Figure 2. Typical Reverse Current* *The curves shown are typical for the highest voltage device in the voltage grouping. Typical reverse current for lower voltage selections can be estimated from these same curves if applied VR is sufficiently below rated VR. 0.3 0.2 50 0.1 45 0.07 NOTE: TYPICAL CAPACITANCE AT 0 V = 45 pF C, CAPACITANCE (pF) 40 0.05 0.03 0.02 35 30 25 20 15 10 0.01 5.0 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 0 0 vF, INSTANTANEOUS VOLTAGE (VOLTS) 10 20 Figure 1. Typical Forward Voltage 30 40 50 60 70 80 90 100 VR, REVERSE VOLTAGE (VOLTS) 10 RATED VOLTAGE APPLIED RqJC = 13°C/W TJ = 175°C 9.0 8.0 7.0 6.0 5.0 4.0 DC 3.0 2.0 SQUARE WAVE 1.0 0 80 90 100 110 120 130 140 150 160 170 180 PF(AV) , AVERAGE POWER DISSIPATION (WATTS) IF(AV) , AVERAGE FORWARD CURRENT (AMPS) Figure 3. Typical Capacitance 5.0 TJ = 175°C 4.0 5.0 I 10 (CAPACITANCELOAD) PK + 20 I 3.0 AV 2.0 DC SQUARE WAVE 1.0 0 0 0.5 1.0 1.5 2.0 TC, CASE TEMPERATURE (°C) IF(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 4. Current Derating, Case Figure 5. Power Dissipation http://onsemi.com 3 2.5 MURS120T3G Series, SURS8120T3G Series MURS140T3G, MURS160T3G, SURS8140T3G, SURS8160T3G 10 IR, REVERSE CURRENT (m A) 7.0 175°C 5.0 100°C 3.0 i , INSTANTANEOUS FORWARD CURRENT (AMPS) F TC = 25°C 2.0 1.0 0.7 400 200 80 40 20 8.0 4.0 2.0 0.8 0.4 0.2 0.08 0.04 0.02 0.008 0.004 TJ = 175°C TJ = 100°C TJ = 25°C 0 100 200 0.5 300 400 500 600 700 VR, REVERSE VOLTAGE (VOLTS) Figure 7. Typical Reverse Current* *The curves shown are typical for the highest voltage device in the voltage grouping. Typical reverse current for lower voltage selections can be estimated from these same curves if applied VR is sufficiently below rated VR. 0.3 0.2 25 0.1 0.07 NOTE: TYPICAL CAPACITANCE AT 0 V = 24 pF C, CAPACITANCE (pF) 20 0.05 0.03 0.02 15 10 5.0 0.01 0.3 0.5 0.7 0.9 1.1 1.3 1.5 1.7 1.9 2.1 2.3 0 0 vF, INSTANTANEOUS VOLTAGE (VOLTS) 4.0 8.0 Figure 6. Typical Forward Voltage 12 16 20 24 28 32 36 40 VR, REVERSE VOLTAGE (VOLTS) 10 RATED VOLTAGE APPLIED RqJC = 13°C/W TJ = 175°C 9.0 8.0 7.0 6.0 5.0 4.0 DC 3.0 2.0 SQUARE WAVE 1.0 0 0 20 40 60 80 100 120 140 160 180 200 PF(AV) , AVERAGE POWER DISSIPATION (WATTS) IF(AV) , AVERAGE FORWARD CURRENT (AMPS) Figure 8. Typical Capacitance 5.0 4.0 5.0 10 (CAPACITANCE LOAD) I PK + 20 I SQUARE WAVE AV 3.0 DC TJ = 175°C 2.0 1.0 0 0 0.5 1.0 1.5 2.0 TC, CASE TEMPERATURE (°C) IF(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 9. Current Derating, Case Figure 10. Power Dissipation http://onsemi.com 4 2.5 MURS120T3G Series, SURS8120T3G Series PACKAGE DIMENSIONS SMB CASE 403A−03 ISSUE J HE NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION b SHALL BE MEASURED WITHIN DIMENSION L1. E b DIM A A1 b c D E HE L L1 D POLARITY INDICATOR OPTIONAL AS NEEDED MIN 1.95 0.05 1.96 0.15 3.30 4.06 5.21 0.76 MILLIMETERS NOM MAX 2.30 2.47 0.10 0.20 2.03 2.20 0.23 0.31 3.56 3.95 4.32 4.60 5.44 5.60 1.02 1.60 0.51 REF MIN 0.077 0.002 0.077 0.006 0.130 0.160 0.205 0.030 INCHES NOM 0.091 0.004 0.080 0.009 0.140 0.170 0.214 0.040 0.020 REF MAX 0.097 0.008 0.087 0.012 0.156 0.181 0.220 0.063 A L L1 A1 c SOLDERING FOOTPRINT* 2.261 0.089 2.743 0.108 2.159 0.085 SCALE 8:1 mm Ǔ ǒinches *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 http://onsemi.com 5 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MURS120T3/D Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: ON Semiconductor: MURS105T3G MURS110T3G MURS115T3G MURS120T3G MURS140T3G MURS160T3G SURS8120T3G SURS8140T3G SURS8160T3G