SL Power MW152KA05XX Medical / switch mode power supply Datasheet

MW152
Universal 50 Watt Series
Medical / Switch Mode Power Supply
3 Year Warranty
• 100-240 VAC Universal Input
• Desktop Style
• Single Output to 50W
• Six Models Available; 5V to 24V
• Regulated Output with Low Ripple
• Impact Resistant Polycarbonate Enclosure
• Modified and Custom Designs
• No Load Power Consumption < 0.75W
• Meets ENERGY STAR Requirements
see reverse side for details
International Safety Standard Approvals
Specifications
General Specifications
Output Specifications
Line and Load
Voltage Regulation
Excluding cord
+/-1%
Topology
Switching-Fixed
Frequency Flyback
Ripple
1% Vp-p max.
Efficiency
Transient Response
0.5ms for 50%
Load change Typical
5V and 9V
12V to 24V
70% min.
≥ 84%
Hold-up Time
Protection
Over-current Protection
(Hiccup)
Short Circuit Protection
@120VAC
@240VAC
18ms min.
80ms min.
Input Specifications
Input Voltage Range
Storage Temp
-30° C to 85° C
Approvals and
Safety Standards
UL60601-1,
IEC/EN60601-1
EMC : EN55024 /
EN60601-1-2
100-240VAC -10%, +10%
90VAC Input
1.2A max. MTBF
100,000 Calculated Hours
Internal Primary
Current Fuse,
Inrush Limiting
Case and Dimension
LP6
4.20L x 2.60W x 1.46H (in)
107.0L x 66.0W x 37.0H (mm)
Case Material
Black 94V0
Polycarbonate
Cord and Connectors
6ft. 2 Conductor, 18AWG,
AULT#3 Connector.
Other connectors are
also available.
47-63Hz
Protection
Environmental Specifications
Thermal Performance
Operating temperature
full load, no derating
convectional cooling
Non vented case
0° C to 40° C
Relative Humidity
Non-condensing
5% to 95% Altitude
3,000VAC, 4,250VDC
Primary-Secondary
Universal input
Line Frequency
Input Current
Dielectric Withstand
0-10,000 feet
SL Power Electronics Corp • 6050 King Drive • Ventura CA, 93003 • Phone:805.486.4565 • Fax:805.487.8911 • Email:[email protected] • www.slpower.com
MW152
Universal 50 Watt Series
Medical / Switch Mode Power Supply
For the most current data and application support visit www.slpower.com
Output Currents
Output
Voltage
Min
Max
Ault Part Number
Max
Watts
Ripple
Vp-p max.
MW152KA05XX*
5V
0.00 A
6.00 A
30.0 W
50 mV
MW152KA09XX*
9V
0.00 A
5.00 A 45.0 W
90 mV
MW152KA12XX
12 V
0.00 A
4.20 A
50.4 W
120 mV
MW152KA15XX
15 V
0.00 A
3.33 A 50.0 W
150 mV MW152KA18XX
18 V
0.00 A
2.80 A 50.4 W
180 mV
MW152KA24XX
24 V
0.00 A
2.00 A
48.0 W
240 mV Ault Part Number Key
Pin Connections
MW152
K
A
05
XX
Product
Family
Name
Manufacturing
Location
Design
Revision
Changes
Voltage
DC
Connector
Number
Input Configuration
IEC320
w/ground
C14
(F)
IEC320
w/o ground
C18
(Q)
N. America/
Japan
(B)
Europe
(M)
United
Kingdom
(G)
Specify the Input Configuration Code in your order.
Australian
(E)
Shaver
C8
(N)
Pinout Code
Center contact: positive
Description
Switchcraft 760 plug or equivalent
Suggested Mating
Switchcraft 712A jack or equivalent
Other Connectors are available by special order
Energy Star Specifications
Power Supplies that are single voltage external AC to DC and AC to AC
included with other retail products and single voltage external AC to DC
or AC to AC power supplies sold separately; and consumer audio and video
equipment, which includes compact audio products, DVD players and
recorders as well as television adapters. (Please refer to the reverse side of
data sheet for specifications and marking protocol.)
Energy-Efficiency Criteria for Active Mode
To be eligible for ENERGY STAR qualification, an external power supply
must meet or exceed a minimum efficiency for Active Mode, which varies
based on the model’s nameplate output power. The table below outlines
the equations for determining minimum average efficiency.
Nameplate Output Power
0 to ≤ 1 watt
> 1 to ≤ 49 watts
> 49 watts
Minimum Average Efficiency in Active Mode
≥ 0.49 * Pno
≥ [0.09 * Ln (Nameplate Output)] + 0.49
≥ 0.84
Energy Consumption Criteria for No Load
The second half of the ENERGY STAR specification is the No-Load power
requirement, which specifies the maximum AC power that may be used by
a qualifying external power supply in the No-Load condition. Maximum
power consumption levels for No-Load Mode are provided below.
Nameplate Output Power
0 to < 10 watts
≥ 10 to ≤ 250 watts
Maximum Power in No-Load
≤ 0.5 watts
≤ 0.75 watts
*Does not meet Energy Star requirements
SL Power Electronics Corp • 6050 King Drive • Ventura CA, 93003 • Phone:805.486.4565 • Fax:805.487.8911 • Email:[email protected] • www.slpower.com
Data Sheet © 2006 SL Power Electronics Corp. The information and specifications contained in this data sheet are believed to be correct at time of publication. However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice.
Rev.9/22/06
Similar pages