GLENAIR MWEB2L-128P-4J218 Mweb series edgeboard connector Datasheet

MWEB Series EdgeBoard Connectors
Industry-Standard, Approved for Airborne Computers
MWEB EdgeBoard connectors meet the requirements of
MIL-DTL-55302/120 thru /123. Available with 128 or 184
contacts.
Rugged Aluminum Shell and TwistPin Contacts
MWEB connectors share the same design and
construction as the Glenair Micro-D M83513 connector.
Backplane, Daughtercard and Wired
Vertical mount thru-hole motherboard connectors
and straddle mount daughtercard connectors are
complemented by right angle thru-hole and pre-wired I/O
versions.
Rugged Mil Spec Performance in a High-Density Backplane
Connector System: The MWEB EdgeBoard
PC Board
Featuring a width of only ¼ inch (6.4 mm.),
MWEB Series connectors provide highdensity in a rugged metal shell connector.
Contacts are rated at 3 amps, and the DWV
voltage rating is 300 volts AC RMS at 70,000
feet altitude. The two row, .050 inch (1.54
mm.) spacing is made possible by using
TwistPin reverse gender contacts. Insertmolded LCP insulators are resistant to heat
and chemicals. Contacts are beryllium copper
with fifty microinches of gold plating. Shells
are machined aluminum alloy. Hexagonal
polarizing keys allow up to 36 keying options.
Contact Tail
.019” (0.49) Diameter Copper
Wire, Solder Dipped
Rigid Epoxy Potting
Compound
Liquid Crystal Polymer
Dielectric
Aluminum Shell, Electroless
Nickel Plated
Micro
Socket
Contact
Aluminum Shell, Electroless
Nickel Plated
Liquid Crystal Polymer
Dielectric
TwistPin
Contact
Rigid Epoxy Potting
Compound
Contact Tail
.019” (0.49) Diameter Copper
Wire, Gold Plated
© 2006 Glenair, Inc.
CAGE Code 06324/0CA77
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
N-2
E-Mail: [email protected]
MWEB Series EdgeBoard Connectors
MWEB-128P Vertical Mount Backplane Connector
MWEB-128P BACKPLANE THRU-HOLE CONNECTOR
Part Number MWEB2L-128P5W4-.375
3.950 ± .015
(100.33 ± 0.38)
3.700 (93.98)
.265 (6.73)
3.318 ± .003
(84.28 ± 0.08)
MAX.
PIN # A64
PIN # A1
.191
PIN # B64
.050 (1.27)
.050 (1.27) TYP.
PIN # B1
.277/.263
(7.04/6.68)
.40 (10.1)
± .010 (0.25)
.190/.180
(4.83/4.57)
.300/.250
(7.62/6.35)
B EVEN
A EVEN
.375/.325
(9.52/8.26)
B64
B1
A64
A1
B ODD
A ODD
Ø .017/.021
(0.43/0.53)
.075
(1.91)
Ø .091/.098
(2.31/2.49)
DIA 2 PLACES
3.700 (93.98)
.075
(1.91)
2X Ø .096 (2.44)
.275 (6.99)
A5
A3
A4
A2
B5
B3
128 X
Ø .040 PTH
A1
.075 (1.91)
B4
B1
B2
.0375 (0.96)
.075 (1.91)
63 EQUAL SPACES
AT .050 (1.27)
(TYP)
N
PATTERN SHOWN IS FOR CONNECTOR
MOUNTING SIDE OF PC BOARD
© 2006 Glenair, Inc.
CAGE Code 06324/0CA77
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
N-3
E-Mail: [email protected]
MWEB Series EdgeBoard Connectors
MWEB-128S Straddle Mount Cardedge Connector
MWEB-128S STRADDLE MOUNT CARDEDGE CONNECTOR
Part Number MWEB2L-128S4BS3
3.950 ± .015
(100.33 ± 0.38)
3.700 (93.98)
.265 (6.73)
MAX.
3.41 ± .010
(86.61 ± 0.25)
PIN # B64
PIN # B1
.191
PIN # A64
.050 (1.27)
.050 (1.27) TYP.
PIN # A1
.250
(6.3)
.465 (11.81)
MAX
.260/.240
(6.60/6.10)
.091/.098
(2.31/2.49)
DIA 2 PLACES
.190 (4.83)
DIA 2 PLACES
.070
(1.78)
.098/.091(2.49/2.31)
DIA C’BORE .187 2
PLACES
FOR 1/16"
THICK PC
BOARD
.035 (0.89)
.190 (4.83)
DIA 2 PLACES
.030 (0.76)
MAX
3.700 (93.98)
.091/.098
(2.31/2.49)
DIA 2 PLACES
.100 (2.54) MIN
SOLDER
.275 (6.99)
.200 ± .020
(5.08 ± .51) MIN
.250 (6.35) MIN
.128 (3.25) MAX
63 EQUAL SPACES
AT .050 (1.27)
(TYP)
.020/.032 (0.51/0.81)
PATTERN SHOWN IS THE SAME
ON BOTH SIDES OF PC BOARD
© 2006 Glenair, Inc.
CAGE Code 06324/0CA77
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
N-4
E-Mail: [email protected]
MWEB Series EdgeBoard Connectors
MWEB-128S Right Angle Board Connector
MWEB-128S RIGHT ANGLE PCB CONNECTOR
Liquid Crystal Polymer
Dielectric
Micro
Socket
Contact
MWEB2L-128SBR- .125
Rigid Epoxy Potting
Compound
Liquid Crystal
Polymer Tray,
Epoxy Filled
Base Part Number
PC Tail Length
.090
.125
.190
.250
Aluminum Shell, Electroless
Nickel Plated
PC Board
Contact Tail
.019” (0.49) Diameter Copper
Wire, Solder Dipped
3.950 ± .015
(100.33 ± 0.38)
3.700 (93.98)
3.41 ± .010
(86.61 ± 0.25)
.050 (1.27) TYP.
PIN # A1
PIN # A64
.191
.050 (1.27)
PIN # B64
PIN # B1
.265 (6.73)
MAX.
.25
(6.3)
A64
.40 (10.2)
.775 (19.69) MAX
.30 (7.6)
.180 ± .005
4.57 ± 0.13)
B1
.091/.098
(2.31/2.49)
DIA 2 PLACES
A64
A1
CONNECTOR MATING FACE THIS SIDE
3.700 (93.98)
.275 (6.99)
.091/.098
(2.31/2.49)
DIA 2 PLACES
.075 (1.91)
B64
B63
Ø.098/.091(2.49/2.31)
DIA C’BORE .190
(4.83) 2 PLACES
© 2006 Glenair, Inc.
A2
A4
A63
63 EQUAL SPACES
AT .050 (1.27)
(TYP)
B1
B3
B5
A64
TAIL LENGTH
± .015 (0.38)
B2
B4
A3
A1
.075 (1.91)
.075 (1.91)
PATTERN SHOWN IS FOR CONNECTOR
MOUNTING SIDE OF PC BOARD
CAGE Code 06324/0CA77
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
N-5
E-Mail: [email protected]
N
MWEB Series EdgeBoard Connectors
MWEB-184P Vertical Mount Backplane Connector
MWEB-184P BACKPLANE THRU-HOLE CONNECTOR
Part Number MWEB2L-184NP5W4-.375
5.800 ± .015
(147.32 ± 0.38)
5.550 (140.97)
5.222/5.214
(132.64/63.86)
2.775 ± .005
(70.49 ± 0.13)
.265 (6.73)
MAX.
PIN # A92
PIN # A1
.191
PIN # B92
.050 (1.27)
TYP.
.050 (1.27)
PIN # B1
.091/.098
(2.31/2.49)
DIA 3 PLACES
.400 (10.1)
± .010 (0.25)
.277/.263
(7.04/6.68)
.300/.250
(7.62/6.35)
.375/.325
(9.52/8.26)
5.550 (140.97)
184 X Ø.040 (1.02) PTH
.091/.098
(2.31/2.49)
DIA 3 PLACES
A47
A92
A48
B48
.017/.021
(0.43/0.53)
.075
(1.91)
2.775 (70.49)
.075
(1.91)
.275 (6.99)
A45
A3
A4
A46
B4
B46
A1
.075 (1.91)
A2
B3
B45
B47
B92
.190/.180
(4.83/4.57)
B1
B2
.0375 (0.96)
.075 (1.91) TYP
.250
(6.35)
.250
(6.35)
45 EQUAL SPACES
AT .050 (1.27)
(TYP)
PATTERN SHOWN IS FOR CONNECTOR
MOUNTING SIDE OF PC BOARD
© 2006 Glenair, Inc.
CAGE Code 06324/0CA77
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
N-6
E-Mail: [email protected]
MWEB Series EdgeBoard Connectors
MWEB-184S Straddle Mount Cardedge Connector
MWEB-184S STRADDLE MOUNT CARDEDGE CONNECTOR
Part Number MWEB2L-184NS4BS3
5.800 ± .015
(147.32 ± 0.38)
5.550 (140.97)
.265
(6.73)
MAX.
5.33 (135.38)
MAX
PIN # B92
PIN # B1
.191
PIN # A92
.050 (1.27)
TYP.
.050 (1.27)
PIN # A1
.277/.263
(7.04/6.68)
.465 (11.81)
MAX
.091/.098
(2.31/2.49)
DIA 3 PLACES
2.775 ± .005
(70.49 ± 0.13)
.030 (0.76)
MAX
.260/.240
(6.60/6.10)
.190 (4.83)
DIA 3 PLACES
.100 (2.54) MIN
SOLDER
.200 ± .020
(5.08 ± .51) MIN
.070
(1.78)
FOR 1/16"
THICK PC
BOARD
5.550 (140.97)
.091/.098
(2.31/2.49)
DIA 3 PLACES
.250 (6.35) MIN
.275
(6.99)
2.775 (70.49)
.275
.275 (6.99)
(6.99)
.128 (3.25) MAX
N
45 EQUAL SPACES
AT .050 (1.27)
(TYP)
45 EQUAL SPACES
AT .050 (1.27)
(TYP)
.020/.032 (0.51/0.81)
PATTERN SHOWN IS THE SAME
ON BOTH SIDES OF PC BOARD
© 2006 Glenair, Inc.
CAGE Code 06324/0CA77
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
N-7
E-Mail: [email protected]
MWEB Series EdgeBoard Connectors
MWEB-184S Right Angle Board Connector
MWEB-184S RIGHT ANGLE PCB CONNECTOR
Liquid Crystal Polymer
Dielectric
MWEB2L-184NSBR- .125
Micro
Socket
Contact
Base Part Number
PC Tail Length
.090
.125
.190
.250
.098/.091(2.49/2.31)
DIA C’BORE .190
(4.83) 3 PLACES
Rigid Epoxy Potting
Compound
Liquid Crystal
Polymer Tray,
Epoxy Filled
Aluminum Shell, Electroless
Nickel Plated
PC Board
Contact Tail
.019” (0.49) Diameter Copper
Wire, Solder Dipped
TAIL LENGTH
± .015 (0.38)
5.800 ± .015
(147.32 ± 0.38)
5.550 (140.97)
5.33 (135.38)
MAX
PIN # A1
PIN # A92
.191
PIN # B92
PIN # B1
.050 (1.27)
.265 (6.73) MAX.
.050 (1.27) TYP.
.25
(6.3)
.775 (19.69) MAX
.40 (10.2)
B46
B2
B47
.30 (7.6)
.180 ± .005
4.57 ± 0.13)
B1
A1
B92
A2
A46
2.775 ± .005
(70.49 ± 0.13)
A47
.091/.098
(2.31/2.49)
DIA 3 PLACES
5.550 (140.97)
184 X Ø.040
(1.02) PTH
2.775 (70.49)
A91
.091/.098
(2.31/2.49)
DIA 3 PLACES
A46
A48
A92
B3
B45
B47
B91
.075 (1.91) TYP
B1
.075 (1.91) TYP
A2
A45
A47
.075 (1.91)
B2
B46
B48
B92
A3
A1
.275 (6.99)
45 EQUAL SPACES
AT .050 (1.27)
(TYP)
.250
(6.35)
.250
(6.35)
45 EQUAL SPACES
AT .050 (1.27)
(TYP)
PATTERN SHOWN IS FOR CONNECTOR
MOUNTING SIDE OF PC BOARD
© 2006 Glenair, Inc.
CAGE Code 06324/0CA77
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
N-8
E-Mail: [email protected]
MWEB Series EdgeBoard Connectors
MWEB Pre-Wired and Solder Cup Connectors
MWEB EdgeBoard Connectors For Input/Output WireTo-Board Applications –
With 128 or 184 contacts, these narrow profile factoryterminated MWEB connectors provide a space-saving
I/O wire to board solution. Connector width of .25 inch
(6.4 mm.) allows for high-density card slots.
High Performance TwistPin Contacts
Suitable for airborne avionics processors and missioncritical computers, these pre-wired connectors
feature interfacial seals and backpotting for improved
environmental protection. Or, choose solder cup
connectors for integration into wire harnesses.
HOW TO ORDER MWEB PIGTAIL CONNECTORS
Series
Layout
Contact
Type
MWEB2L
128
184N
P – Pin
S – Socket
Wire Gage
(AWG)
4
6
8
0
–
–
–
–
#24
#26
#28
#30
Wire Type
K – M22759/11
600 Vrms Teflon® (TFE)
J – M22759/33®
600 Vrms Modified CrossLinked Tefzel (ETFE)
Wire
Length
Inches
Wire Color
1 – White
2 – Yellow
7 – Ten Color
Repeating
Hardware Option
18
N
J
P
Total Length
In Inches. “18”
Specifies 18
Inches.
– No hardware
– Jackscrews
– Jackposts
Sample Part Number
MWEB2L
– 128
P
– 6
K
7
– 24
N
HOW TO ORDER MWEB SOLDER CUP CONNECTORS
Series
Layout
Contact Type
MWEB2L
128
184N
P – Pin
S – Socket
Termination Type
S – Solder Cup
Hardware Option
N
J
P
– No hardware
– Jackscrews
– Jackposts
Sample Part Number
MWEB2L
© 2006 Glenair, Inc.
– 128
P
CAGE Code 06324/0CA77
S
N
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
N-9
E-Mail: [email protected]
N
MWEB Series EdgeBoard Connectors
MWEB Hardware Kits
MWEB HARDWARE KITS
MWEB Jackscrew and Jackpost Kits
Stainless steel jackscrew kits are stainless steel and install
with roll pins. Insert the stud through the flange from the
mating side, then install the knurled head from the other side
and attach to stud with a roll pin. Each kit contains two studs,
two heads and two retainer pins.
Jackscrew Part Number (xx)
Jackscrew Kit
Jackpost Part Number (xx)
MWEB Polarizing Keys
RECEPTACLE SHELL
These stainless steel pol keys meet the requirements of
MIL-C-55302/124-01. (6) keying positions per end equals (36)
total positions. Install with roll pins, supplied. Half-hex keys
are tapped for optional #2-56 screw installation. Kit consists
of (2) keys and (4) retainer pins.
Part Number 080-00-00-810
RETAINING PINS
(4) SUPPLIED
HEX KEY
(2) SUPPLIED
PLUG SHELL
#2-56 UNC-2A SCREW
CUSTOMER FURNISHED
© 2006 Glenair, Inc.
CAGE Code 06324/0CA77
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
N-10
E-Mail: [email protected]
Similar pages