CREE MX-6 Xlamp mx-6 led Datasheet

CLD-DS23 Rev 8D
Product family data sheet
Cree® XLamp® MX-6 LEDs
Product Description
FEATURES
Table of Contents
The Cree XLamp® MX-6 LED provides the
•
Available in white (2200 K and
Characteristics.......................................... 2
2600 K to 8300 K CCT)
Flux Characteristics.................................. 3
proven lighting‑class performance and
reliability of Cree XLamp LEDs in a flat‑top
•
Maximum drive current: 1000 mA
Relative Spectral Power Distribution....... 4
PLCC package. The XLamp MX‑6 LED
•
Wide viewing angle: 120°
Relative Flux vs. Junction Temperature... 4
continues Cree’s history of innovation in
•
Electrically neutral thermal path
Electrical Characteristics.......................... 5
LEDs for lighting applications with wide
•
Qualification at max drive current
Relative Flux vs. Current........................... 5
viewing angle, unlimited floor life, uniform
•
RoHS and REACh compliant
Typical Spatial Distribution....................... 6
light output without secondary optics and
•
UL® recognized component
Thermal Design......................................... 6
(E349212)
Reflow Soldering Characteristics............. 7
electrically neutral thermal path.
Notes......................................................... 8
The XLamp MX-6 LED brings high
Mechanical Dimensions......................... 10
performance and quality of light to a wide
Tape and Reel.......................................... 11
range of lighting applications, including
Packaging................................................ 12
linear lighting, LED light bulbs, fluorescent
www.cree.com/Xlamp
retrofits and retail-display lighting.
Copyright © 2009-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are
registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
XLamp ® MX-6 LED
Characteristics
Characteristics
Unit
Thermal resistance, junction to solder point
°C/W
5
degrees
120
mV/°C
-3.3
Viewing angle (FWHM)
Temperature coefficient of voltage
ESD classification (HBM per Mil-Std-883D)
DC forward current
Minimum
Typical
Maximum
Class 2
mA
Forward voltage (@ 300 mA)
V
LED junction temperature
°C
1000
3.3
3.8
150
Copyright © 2009-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
2
XLamp ® MX-6 LED
Flux Characteristics (TJ = 25 °C)
The following table provides several base order codes for XLamp MX-6 LEDs. It is important to note that the base order codes listed
here are a subset of the total available order codes for the product family. For more order codes, as well as a complete description of the
order‑code nomenclature, please consult the XLamp MX LED Family Binning & Labeling document.
Color
CCT Range
Minimum
Cool White
Maximum
5000 K
8300 K
5000 K
8300 K
80-CRI White
Warm White
3700 K
4300 K
2600 K
3700 K
3700 K
4300 K
2600 K
3700 K
2200 K
Minimum Luminous Flux
(lm) @ 300 mA
Calculated Minimum
Luminous Flux (lm)
@ 350 mA*
Order Code
Group
Flux (lm)
Flux (lm)
Rs
114
130
MX6AWT-A1-0000-000E51
Q5
107
122
MX6AWT-A1-0000-000D51
Q5
107
122
MX6AWT-A1-0000-000DE3
Q4
100
114
MX6AWT-A1-0000-000CE3
Q5
107
122
MX6AWT-H1-0000-000D51
Q4
100
114
MX6AWT-H1-0000-000C51
Q5
107
122
MX6AWT-H1-0000-000DE3
Q4
107
114
MX6AWT-H1-0000-000CE3
Q4
100
114
MX6AWT-H1-0000-000CE5
Q3
93.9
107
MX6AWT-H1-0000-000BE5
Q3
93.9
107
MX6AWT-H1-0000-000BE7
Q2
87.4
100
MX6AWT-H1-0000-000AE7
Q4
100
114
MX6AWT-A1-0000-000CE5
Q3
93.9
107
MX6AWT-A1-0000-000BE5
Q3
93.9
107
MX6AWT-A1-0000-000BE7
Q2
87.4
100
MX6AWT-A1-0000-000AE7
P4
80.6
92
MX6AWT-A1-0000-0009EA
P3
73.9
84
MX6AWT-A1-0000-0008EA
P2
67.2
77
MX6AWT-A1-0000-0007EA
Notes:
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on
CRI measurements. See the Measurements section (page 8).
•
Typical CRI for Cool White (4300 K – 8300 K CCT) is 75.
•
Typical CRI for Warm White (2200 K and 2600 K – 4300 K CCT) is 80.
•
Minimum CRI for 80-CRI White is 80.
*
Calculated values for reference purposes only.
Copyright © 2009-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
3
XLamp ® MX-6 LED
Relative Spectral Power
Relative Spectral Power Distribution
Relative Radiant Power (%)
100
80
5000K - 8300K
CCT
3500K - 5000K
CCT
2600K - 3500K
CCT
2200K CCT
60
40
20
0
380
430
480
530
580
630
680
730
780
Wavelength (nm)
Relative Flux Output vs. Junction Temperature
Relative Flux vs. Junction Temperature (IF = 300 mA)
100%
90%
Relative Luminous Flux
80%
70%
60%
50%
40%
30%
20%
10%
0%
25
50
75
100
125
150
Junction Temperature (ºC)
Copyright © 2009-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
4
XLamp ® MX-6 LED
Electrical Characteristics (TJ = 25 °C)
1000
900
Forward Current (mA)
800
700
600
500
400
300
200
100
0
2.50
2.75
3.00
3.25
3.50
3.75
4.00
4.25
4.50
Forward Voltage (V)
Relative Flux vs. Current (TJ = 25 °C)
300
Relative Luminous Flux (%)
250
200
150
100
50
0
100
200
300
400
500
600
700
800
900
1000
Forward Current (mA)
Copyright © 2009-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
5
XLamp ® MX-6 LED
Typical Spatial Distribution
Relative Luminous Intensity (%)
100
80
60
40
20
-100
-80
-60
-40
-20
0
0
20
40
60
80
100
Angle (º)
Thermal Design
The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end
- roboto
product to be Thermal
designedDesign
in a manner
that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life
and optical characteristics.
1200
Maximum Current (mA)
1000
800
600
400
Rj-a = 10°C/W
Rj-a = 15°C/W
200
Rj-a = 20°C/W
Rj-a = 25°C/W
0
0
20
40
60
80
100
120
140
160
Ambient Temperature (ºC)
Copyright © 2009-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
6
XLamp ® MX-6 LED
Reflow Soldering Characteristics
In testing, Cree has found XLamp MX-6 LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general
guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used.
Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment.
tP
TP
Critical Zone
TL to TP
Temperature
Ramp-up
TL
tS
Tsmax
Tsmin
Ramp-down
ts
Preheat
25
t 25˚C to Peak
Profile Feature
Average Ramp-Up Rate (Tsmax to Tp)
Time
Lead-Free Solder
1.2 °C/second
Preheat: Temperature Min (Tsmin)
120 °C
Preheat: Temperature Max (Tsmax)
170 °C
Preheat: Time (tsmin to tsmax)
65-150 seconds
Time Maintained Above: Temperature (TL)
Time Maintained Above: Time (tL)
217 °C
45-90 seconds
Peak/Classification Temperature (Tp)
235 - 245 °C
Time Within 5 °C of Actual Peak Temperature (tp)
20-40 seconds
Ramp-Down Rate
1 - 6 °C/second
Time 25 °C to Peak Temperature
4 minutes max.
Note: All temperatures refer to the topside of the package, measured on the package body surface.
Copyright © 2009-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
7
XLamp ® MX-6 LED
Notes
Measurements
The luminous flux, radiant power, chromaticity and CRI measurements in this document are binning specifications only and solely
represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors
that are not within Cree’s control and are not intended or provided as operational specifications for the products. Calculated values are
provided for informational purposes only and are not intended as specifications.
Pre‑Release Qualification Testing
Please read the LED Reliability Overview for details of the qualification process Cree applies to ensure long-term reliability for XLamp
LEDs and details of Cree’s pre-release qualification testing for XLamp LEDs.
Lumen Maintenance
Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance.
For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document.
Please read the Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing and forecasting.
Please read the Thermal Management application note for details on how thermal design, ambient temperature and drive current affect
the LED junction temperature.
Moisture Sensitivity
Cree recommends keeping XLamp MX-6 LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to
soldering. Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity.
Once the MBP is opened, XLamp MX-6 LEDs should be handled and stored as MSL 2a per JEDEC J-STD-033, meaning they have limited
exposure time before damage to the LED may occur during the soldering
operation. The table on the right specifies the maximum exposure time
Temp.
Maximum Percent Relative Humidity
30%
40%
50%
60%
70%
80%
90%
in days depending on temperature and humidity conditions. LEDs with
35 ºC
-
-
-
17
1
.5
.5
exposure time longer than the specified maximums must be baked
30 ºC
-
-
-
28
1
1
1
according to the baking conditions listed below.
25 ºC
-
-
-
-
2
1
1
20 ºC
-
-
-
-
2
1
1
Baking Conditions
It is not necessary to bake all XLamp MX-6 LEDs. Only the LEDs that meet all of the following criteria must be baked:
1.
LEDs that have been removed from the original MBP.
2.
LEDs that have been exposed to a humid environment longer than listed in the Moisture Sensitivity section above.
3.
LEDs that have not been soldered.
LEDs should be baked at 70 ºC for 24 hours. LEDs may be baked on the original reels. Remove LEDs from the MBP before baking. Do
not bake parts at temperatures higher than 70 ºC. This baking operation resets the exposure time as defined in the Moisture Sensitivity
section above.
Copyright © 2009-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
8
XLamp ® MX-6 LED
Notes - Continued
Storage Conditions
XLamp MX-6 LEDs that have been removed from the original MBP but not soldered should be stored in one of the following ways:
•
Store the parts in a rigid metal container with a tight-fitting lid. Verify that the storage temperature is <30 °C, and place fresh desiccant
and an RH indicator in the container to verify that the RH is no greater than 60%.
•
Store the parts in a dry, nitrogen‑purged cabinet or container that actively maintains the temperature at <30° and the RH at no greater
than 60%.
•
For short-term store only: LEDs can be resealed in the original MBP soon after opening. Fresh desiccant may be needed. Use the
included humidity indicator card to verify <60% RH.
If an environment of <60% RH is not available for storage, XLamp MX-6 LEDs should be baked (described above) before reflow soldering.
RoHS Compliance
The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as
implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product
Documentation sections of of www.cree.com.
REACh Compliance
REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA)
has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to
insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available
upon request.
UL® Recognized Component
Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/
UL 8750.
Vision Advisory
WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please
refer to the LED Eye Safety application note.
Copyright © 2009-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
9
XLamp ® MX-6 LED
Mechanical Dimensions
All measurements are ±.13 mm unless otherwise indicated.
Top View
Top View
Bottom View
Side View
Recommended FR4 Solder Pad
Recommended MCPCB Solder Pad
Alternative Solder Pad
Copyright © 2009-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
10
6
5
4
3
2
1
REVISONS
NOTICE
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
CONTAINED WITHIN ARE THE PROPRIETARY AND
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
UNAUTHORIZED PERSON WITHOUTTHE WRITTEN CONSENT
OF CREE INC.
REV
DESCRIPTION
BY
A
Released
J.L.
7/1/09
B
ADDED CATHODE AND ANODE NOTES
DC
2/26/12
8.0±.1
1.75±.10
APP'D
XLamp ® MX-6 LED
1.5±.1
4.0±.1
DATE
2.5±.1
D
Cathode Side
Tape and Reel
All Cree carrier tapes
+.3 conform to EIA-481D, Automated Component Handling Systems Standard.
12.0
.0
Except as noted, all dimensions in mm.
(
Cathode Mark
Anode Side
(denoted by + and circle)
(4 )
(8 )
1.5 )
C
CATHODE
SIDE Direction
User
Feed
(1.75 )
END
(1.55 )
START
(12 )
Trailer
160mm (min) of
Trailer
empty
pockets
160mm (min) of
pockets
sealedempty
with
tape
sealed with tape
(20 pockets
(20 pocketsmin.)
min.)
Loaded Pockets
(1,000 Lamps)
Loaded Pockets
(1,400 pcs /Reel
ANODE SIDE
Leader
400mm (min) of
Leader
empty pockets with
400mm (min) of
empty pockets with
at least 100mm
at least 100mm
sealed by tape
sealed by tape
(50 empty pockets min.)
(50 empty pockets min.)
B
User Feed Direction
Cover Tape
THIRD ANGLE PROJECTION
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
.XX ±
.25
.XXX ±
.125
X°
±
.5 °
FOR SHEET METAL PARTS ONLY
.X
±
1.5
.XX ±
.75
.XXX ±
.25
X°
±
.5 °
DATE
DRAWN BY
D. Seibel
DATE
APPROVED
DATE
5
4
3
Phone (919) 313-5300
Fax (919) 313-5558
A
TITLE
Carrier Loading Specification-MX6
MATERIAL
SIZE
FINAL PROTECTIVE FINISH
SCALE
SURFACE FINISH: 1.6
6
4600 Silicon Drive
Durham, N.C 27703
7/1/09
CHECK
Pocket Tape
2
C
4.000
REV.
DRAWING NO.
2402-00005
SHEET
1
13mm
7"
Copyright © 2009-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
11
B
OF
1 /2
XLamp ® MX-6 LED
Packaging
Unpackaged Reel
Vacuum-Sealed
Vacuum-Sealed
Moisture
Barrier Bag
Moisture Barrier Bag
Label
CREE
Binwith
Code Cree Bin
&
Barcode
LabelLot #
Code,
Qty,
Label with Cree Bin Code,
Quantity, Reel ID
Label
with
Cree Bin
Label with
Customer
P/N, Qty,Qty,
Lot #, Lot
PO # #
Code,
Packaged Reel
Patent Label
Dessicant
(inside bag)
Label with Customer Order
Label
with Cree Order Code,
Code, Qty, Reel ID, PO #
Quantity, Reel ID, PO #
Humidity Indicator Card
(inside bag)
Label with Cree Bin
Code, Quantity, Reel ID
Boxed Reel
Label with Cree Order Code,
Quantity, Reel ID, PO #
Label with Cree Bin Code,
Quantity, Reel ID
Patent Label
(on bottom of box)
Copyright © 2009-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of
Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
12
Similar pages