3M N3764-6302RB 3mâ ¢ pak 100 4-wall header Datasheet

3M™ Pak 100 4-Wall Header
.100″ × .100″ Latch/Ejector, Straight and Right Angle
3000 Series
• Military (with 3M's 3518 polarizing key) and
centerbump polarization
• Standard ejector latches
• Mounting holes for securing header to board
• RoHS* compliant
• Optional polarizing posts
• High temperature insulator suitable for “no
lead” soldering operations
• Suitable for reflow soldering using “paste in
hole” techniques
Date Modified: January 7, 2005
TS-0772-04
Sheet 1 of 4
Physical
Insulator
Material: Glass Filled Polyester (PCT)
Flammability: UL 94V-0
Color: Black
Contact
Material: Copper Alloy
Plating
100 µ″ [ 2.54 µm ] Nickel - Overall
30 µ″ [ 0.76 µm ] Gold
200 µ″ [ 5.08 µm ] Matte Tin
e3 (per JESD97)
Marking: 3M Logo, Part Identification Number and Orientation Triangle
Underplating:
Wiping Area:
Solder Tails:
Terminal Finish Indicator:
Electrical
Current Rating: 1 A
Insulation Resistance: >1 × 109 Ω at 500 Vdc
Withstanding Voltage: 1000 Vrms at Sea Level
Environmental
-55°C to +105°C
Process Rating: Maximum 260°C, single pass, (profile per J-STD-020C)
Moisture Sensitivity Level: 1 (per J-STD-020C)
Temperature Rating:
UL File No.: E68080
3M
Interconnect Solutions
http://www.3M.com/interconnects/
*RoHS = Directive 2002/95/EC,
Restriction on the Use of Certain Hazardous Substances in Electrical and Electronic Equipment.
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Pak 100 4-Wall Header
.100″ × .100″ Latch/Ejector, Straight and Right Angle
-X202
Header with
Short Ejector/Latch
for 3M Sockets without
Strain Relief
.08
[2.0]
3000 Series
-X302
Header with
Long Ejector/Latch
for 3M Sockets with
Strain Relief
.08
[2.0]
.573 ± .010
[ 14.55 ]
.424 ± .010
[ 10.77 ]
1.07 Ref
[27.2]
.97 Ref
[24.6]
.37 Ref
[9.4]
.46 Ref
[11.7]
2X ø.100
[2.54]
(See Note 2)
.025 ± .002 Sq Typ
[ 0.64 ]
.24
[6.1]
.28
[7.1]
D
.020
[0.51]
.25
[6.4]
.30
[7.6]
.100 Ref
[2.54]
.12
[3.0]
.112 ± .010
[2.84]
CL
.34
[8.3]
.100 Ref
[2.54]
Position 1
B
“Y”
.0245 Typ
Position 1
Orientation
Triangle
Section A-A
(Straight)
.025 ± .002 Sq Typ
[ 0.64 ]
.24
[6.1]
.0245 Typ
CL
.30
[7.6]
“Y”
.112 ± .010
[2.84]
.049 Ref
[1.24]
.100 Ref
[2.54]
.21
[5.3]
Notch A
(See Table 1 & Note1)
Notch B
(See Table 1)
Notch C
(See Table 1 & Note 1)
.16
[4.1]
A
B
.68
[17.3]
.35
[8.9]
.020
[0.51]
A
2X ø .100
[2.54]
(See Note 2)
C
B
.197
[5.00]
.20
[5.1]
A
Section B-B
(Right Angle)
TS-0772-04
Sheet 2 of 4
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Pak 100 4-Wall Header
.100″ × .100″ Latch/Ejector, Straight and Right Angle
3000 Series
Table 1
Pin
Quantity
3M Part
Number
10
Dimensions
Polarization
Notches Provided
A
B
C
D
3793
1.26 [32.1]
1.105 [28.07]
.865 [21.97]
.71 [18.0]
BC
14
3314
1.46 [37.2]
1.305 [33.15]
1.065 [27.05]
.91 [23.1]
BC
16
3408
1.56 [39.7]
1.405 [35.69]
1.165 [29.59]
1.01 [25.6]
ABC
20
3428
1.76 [44.8]
1.605 [40.77]
1.365 [34.67]
1.21 [30.7]
ABC
24
3627
1.96 [49.8]
1.805 [45.85]
1.565 [39.75]
1.41 [35.8]
ABC
26
3429
2.06 [52.4]
1.905 [48.39]
1.665 [42.29]
1.51 [38.3]
ABC
30
3440
2.26 [57.4]
2.105 [53.47]
1.865 [47.37]
1.71 43.43]
ABC
34
3431
2.46 [62.6]
2.305 [58.55]
2.065 [52.45]
1.91 [48.5]
ABC
40
3432
2.76 [70.2]
2.605 [66.17]
2.365 [60.07]
2.21 [56.1]
ABC
50
3433
3.26 [82.9]
3.105 [78.87]
2.865 [72.77]
2.71 [68.8]
ABC
60
3372
3.76 [95.6]
3.605 [91.57]
3.365 [85.47]
3.21 [81.5]
ABC
3764
3.96 [100.7]
3.805 [96.65]
3.565 [90.55]
3.41 [86.6]
ABC
64
ø.106
[2.69]
.060
[1.52]
± .1
.00
.000
± .01 ± .005
[ ] Dimensions for
Reference only
.41
(See Note 2)
[10.4]
Max to Edge of PCB
.035
for Daisy Chain
[0.89]
Dia
.035
[0.89]
Dia
"Y"
CL
Position 1
.029
[0.74]
Position 1
.100 ± .003
[2.54]
.100 ± .003
[2.54]
.100 ± .003
[2.54]
.352
[8.94]
.100 ± .003
[2.54]
.0
Inch
ø.106 or ø.116
[2.95]
[2.69]
CL
“Y”
[mm]
Tolerance Unless Noted
or
ø.116
[2.95]
(See Note 2)
.300
[7.62]
Side to Side Stackability
Inch
.232
[5.89]
B
C
Recommended Mounting Hole Pattern
Recommended Mounting Hole Pattern
(Right Angle)
(Straight)
Notes:
1. Notches A & C will accomodate 3M Polarizing Keys (3M Part #N3518).
2. Mounting hardware: From solder side of pc board use #4-24 thread cutting screw (3M Part # 3341-5) and .116 [2.95]
dia mounting hole. For right angle version only, #2-56 bolt and nut (3M Part # 3341-6) with .106 [2.69] dia mounting hole
may be used.
3. .112 [2.84] tail length suitable for .062 [1.57] thick pc board.
4. Contact tails .0245 [0.622] crowned wire with .0075 [0.191] corner radii & .028 [.072] diagonal.
5. Contact your 3M sales representative for custom requirements.
Ordering Information
NXXXX-XX02RB
3M Part Number
(See Table 1)
Pin Configuration
5 = Right Angle
6 = Straight
3M
Interconnect Solutions
http://www.3M.com/interconnects/
Latch/Ejector System
2 = Short Roll Pin Latch/Ejectors
(3M Part # N3505-2)
3 = Long Roll Pin Latch/Ejectors
(3M Part # N3505-3)
TS-0772-04
Sheet 3 of 4
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Pak 100 4-Wall Header
.100″ × .100″ Latch/Ejector, Straight and Right Angle, Accessories
Polarizing Post
Mounting Hardware
3341-5
(Installed from bottom of board)
3341-6
(Right angle product only)
.321
[8.15]
Part N um ber
3 2 0 1 -4
M a te ria l
LCP
C o lo r
B la c k
.100 Dia
[2.54]
.50
[12.7]
.31
[7.9]
3000 Series
Note: Insert Post into one mounting hardware hole on
bottom of header. Set post to protrude .115″.
Panhead Thread Cutting Screw:
#4-24 X 5/16″
Type: USA Std BT, Federal BG
Hex Head Bolt, Nut and Washer
Bolt - #2-56 X 1/2″
3341-5 & 6
Material - Stainless Steel
Polarizing Keys
Part N um ber M aterial
N 3518
N ylon
Breakaway Tab
C olor
B lack
D im A
0.02
.09
[2.3]
.34 Ref
[8.6]
A
.15
[3.8]
Note: #2216 B/A Scotchweld can be used to adhere keys.
TS-0772-04
Sheet 4 of 4
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
Important Notice
All statements, technical information, and recommendations related
to 3M’s products are based on information believed to be reliable,
but the accuracy or completeness is not guaranteed. Before using
this product, you must evaluate it and determine if it is suitable
for your intended application. You assume all risks and liability
associated with such use. Any statements related to the product
which are not contained in 3M’s current publications, or any
contrary statements contained on your purchase order shall have
no force or effect unless expressly agreed upon, in writing, by an
authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture
for a period of 90 days from the time of purchase. 3M MAKES NO
OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. If this product is defective within
the warranty period stated above, your exclusive remedy shall be,
at 3M’s option, to replace or repair the 3M product or refund the
purchase price of the 3M product. Except where prohibited by
law, 3M will not be liable for any indirect, special, incidental or
consequential loss or damage arising from this 3M product,
regardless of the legal theory asserted.
3
Electronic Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
www.3M.com/esd
Minimum 10%
Post-consumer Fiber
Printed in USA.
© 3M 2005
Similar pages