3M N7E50-XA16PG-20 3mâ ¢ cf card header Datasheet

3M™ CF Card Header
CompactFlash Type I, Surface Mount
7E50 Series
• Meets CFA standards
• Single row solder tails with 0.635 mm spacing
• Board component clearance with 1.64 mm
standoff
• Ejector option for easy removal of CF Card
• Retainer clip option permits stability for mobile
and high vibration applications
• RoHS* compliant version (PG & PK plating
suffix) available
Date Modified: September 23, 2005
TS-0662-21
Sheet 1 of 4
Physical
Insulation
Material: Liquid Crystal Polyester (LCP)
Flammability: UL 94V-0
Color: Beige
Contact
Material: Copper Alloy
Plating
Underplating: 100 µ″ [ 2.54 µm ] Nickel
Wiping Area: Gold flash over 80/20 Palladium Nickel (see Ordering Information)
Solder Tails: 50 µ″ [ 1.27 µm ] 85/15 Tin Lead - or Gold Flash (see Ordering Information)
Electrical
Current Rating: .5 A
9
8
Insulation Resistance: >1 × 10 Ω at 500 Vdc, >1 × 10 Ω at 500 Vdc after Environmental
Conditioning
Withstanding Voltage: 500 Vrms at Sea Level
Environmental
Temperature Rating: -55°C to +85°C
Process Rating: Maximum 260°C (per J-STD-020C)
"RoHS compliant" means that the product or part does not contain any of the following substances in excess of the following maximum concentration values
in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent
chromium, polybrominated biphenyls or prolybromianted diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing,
this information represents 3M's knowledge and belief based upon information provided by third party suppliers to 3M.
UL File No.: E68080
3M
Interconnect Solutions
http://www.3M.com/interconnects/
CompactFlash is a registered trademark of SanDisk Corporation.
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ CF Card Header
CompactFlash Type I, Surface Mount
40.16
[ 1.581 ]
0.635 Typ
[ .0250 ]
Pin 1
Pin 50
Pin 25
Pin 26
Pin 13
2X Ø
2.20
[ .087 ]
7E50 Series
Pin Type
Interface Dim A
Pin No.
detect
3.50 [ .138 ]
25, 26
general
4.25 [ .167 ]
all other pins
power
5.00 [ .197 ]
1, 13, 38 & 50
2X 2.71
[ .107 ]
6.64 ± 0.08
[ .261 ]
Pin 38
1.00
[ .039 ]
0.75
[ .030 ]
A
2X 4.00
[ .157 ]
Ø1.50
[ .059 ]
26.5
[ 1.04 ]
-A-
23.5
[ .93 ]
1.50
[ .059 ]
16.0
[ .63 ]
A
19.00
[ .748 ]
11.3
[ .44 ]
2.54
[ .100 ]
35.9
[ 1.41 ]
46.6
[ 1.83 ]
2X 2.00
[ .079 ]
1.8
[ .07 ]
43.03 ± 0.06
[ 1.694 ]
30.48 Ref
[ 1.200 ]
Pin 25
Pin 1
Pin 50
Pin 38
Pin 26
Pin 13
1.40 ± 0.05
[ .055 ]
(See note )
1.75
[ .069 ]
2.00
[ .079 ]
11.0
[ .43 ]
9.50
[ .374 ]
0.64
[ .025 ]
3.50
[ .138 ]
A
4.5
[ .18 ]
1.27 Typ
[ .050 ]
.79 ± 0.05
[ .031 ]
(See note)
2X .89 ± 0.05
[ .035 ]
40.16
[ 1.58 ]
mm
[Inch]
2.5
[ .098 ]
3.50 ± 0.08
[ .138 ]
Tolerance Unless Noted
.0
mm
-A-
-B-
± .3
.00
5.00
[ .197 ]
.000
Section A-A
± .15
[ ] Dimensions for
Reference only
Note: Normal ( Option “7" ) style shown. For Inverse style rotate polarization keys and pin call outs 180°.
Ordering Information
N7E50-X516XX-20
Options: CF Card Polarization
7 = Normal
A = Inverse
3M
Interconnect Solutions
http://www.3M.com/interconnects/
Plating
VU = Au Flash over 25µ″ [ 0.64µm ] PdNi with Sn-Pb
PG = Au Flash over 25u" [.64um] PdNi with Au Flash tails
(RoHS compliant)
PK = Au Flash over 20 u" [0.5um] PdNi with Au flash tails
TS-0662-21
(RoHS compliant)
Sheet 2 of 4
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ CF Card Header
CompactFlash Type I, Surface Mount
7E50 Series
46.13 ± 0.15
[ 1.816 ]
2X 3.00 ± 0.15
[ .118 ]
3.50 ± 0.05
[ .138 ]
40.16 ± 0.10
[ 1.581 ]
3.00 ± 0.10
[ .118 ]
Detail A
7.55 ± 0.05
[ .297 ]
2X 5.0 ± 0.15
[ .197 ]
2X Ø2.20 ± 0.05
[ .087 ]
( Through for M2 )
2.00 ± 0.15
[ .079 ]
2X Ø1.70 ± 0.03
[ .067 ]
( Through for locating Boss )
20.5 Min
[ .81 ]
40.16 ± 0.05
[ 1.581 ]
The End of P.C. Board
The Direction of Inserting Card
Recommended PCB Solder Pad Pattern
31.11 ± 0.05
[ 1.225 ]
0.635 ± 0.030 Typ
[ .0250 ]
0.40 ± 0.03 Typ
[ .016 ]
Pin 26
Pin 1
( Normal )
Pin 26
Pin 1
( Inverse )
Detail A
TS-0662-21
Sheet 3 of 4
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ CF Card Header
CompactFlash Type I, Surface Mount
7E50 Series
Right Button Ejector 3M Part D7E50-7316-03
( Order Separately - See note )
Centerline of Header
26.5
[ 1.04 ]
7.0 Ref
[ .28 ]
for sliding length
4.0
[ .16 ]
Ejecting Length
43.9 Ref
[ 1.73 ]
17.4 Ref
[ .69 ]
7.0 [ .28 ]
Pushing Length
Marking Area
0.75 Ref
[ .030 ]
4.0
[ .16 ]
25.81 Ref
[ 1.016 ]
23.82 Ref
[ .938 ]
52.1
[ 2.05 ]
5.5
[ .22 ]
Material
Holder: Glass Filled LCP
Button: PBT
Plate: Stainless Steel
7.1 [ .28 ]
Installed height
CF Card Retainer Clip 3M Part 3505-34
( Order Separately - See note )
2X 4.6
[ .18 ]
38.9
[ 1.53 ]
18.0
[ .71 ]
47.0 Ref
[ 1.85 ]
34.8
[ 1.37 ]
Material: 1.0mm Dia, Type 302 Stainless
Steel wire per ASTM A-313
6.38
[ .251 ]
2X 7.16
[ .282 ]
2X 4.42
[ .174 ]
Note: Use of either an ejector or a retainer clip excludes the use of the other.
3M
Interconnect Solutions
http://www.3M.com/interconnects/
TS-0662-21
Sheet 4 of 4
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
Important Notice
All statements, technical information, and recommendations
related to 3M’s products are based on information believed to be
reliable, but the accuracy or completeness is not guaranteed.
Before using this product, you must evaluate it and determine if it
is suitable for your intended application. You assume all risks and
liability associated with such use. Any statements related to the
product which are not contained in 3M’s current publications, or
any contrary statements contained on your purchase order shall
have no force or effect unless expressly agreed upon, in writing,
by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and
manufacture for a period of one (1) year from the time of
purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. If this product is defective within the warranty period
stated above, your exclusive remedy shall be, at 3M’s option, to
replace or repair the 3M product or refund the purchase price of
the 3M product. Except where prohibited by law, 3M will not
be liable for any indirect, special, incidental or consequential
loss or damage arising from this 3M product, regardless of
the legal theory asserted.
3
Electronics
6801 River Place Blvd.
Austin, TX 78726-9000
800/328-1368
www.3M.com/electronics
Minimum 10%
Post-Consumer Fiber
Printed in USA.
© 3M 2005
Similar pages