Revised November 2005 NC7NZ14 TinyLogic UHS Inverter with Schmitt Trigger Input General Description Features The NC7NZ14 is a triple Inverter with Schmitt Trigger input from Fairchild’s Ultra High Speed Series of TinyLogic. The device is fabricated with advanced CMOS technology to achieve ultra high speed with high output drive while maintaining low static power dissipation over a very broad VCC operating range. The device is specified to operate over the 1.65V to 5.5V VCC range. The input and output are high impedance when VCC is 0V. Inputs tolerate voltages up to 7V independent of VCC operating voltage. ■ Space saving US8 surface mount package ■ MicroPak Pb-Free leadless package ■ Ultra High Speed; tPD 3.7 ns Typ into 50 pF at 5V VCC ■ High Output Drive; ±24 mA at 3V VCC ■ Broad VCC Operating Range; 1.65V to 5.5V ■ Power down high impedance inputs/output ■ Overvoltage Tolerant inputs facilitate 5V to 3V translation ■ Patented noise/EMI reduction circuitry implemented Ordering Code: Product Order Package Code Number Number Top Mark Package Description NC7NZ14K8X MAB08A NZ14 NC7NZ14L8X MAC08A P6 Supplied As 8-Lead US8, JEDEC MO-187, Variation CA 3.1mm Wide 3k Units on Tape and Reel Pb-Free 8-Lead MicroPak, 1.6 mm Wide 5k Units on Tape and Reel Pb-Free package per JEDEC J-STD-020B. Logic Symbol Connection Diagrams IEEE/IEC (Top View) Pin Descriptions Pin Names Description A Input Y Output AAA represents Product Code Top Mark - see ordering code. Note: Orientation of Top Mark determines Pin One location. Read the Top Product Code Mark left to right, Pin One is the lower left pin (see diagram). Function Table Y=A Input A Y L H H H = HIGH Logic Level Pad Assignment for MicroPak Output L L = LOW Logic Level (Top Thru View) TinyLogic is a registered trademark of Fairchild Semiconductor Corporation. © 2005 Fairchild Semiconductor Corporation DS500492 MicroPak is a trademark of Fairchild Semiconductor Corporation. www.fairchildsemi.com NC7NZ14 TinyLogic UHS Inverter with Schmitt Trigger Input May 2001 NC7NZ14 Absolute Maximum Ratings(Note 1) Recommended Operating Conditions (Note 2) Supply Voltage (VCC ) −0.5V to +7V DC Input Voltage (VIN) −0.5V to +7V Supply Voltage Operating (VCC) DC Output Voltage (VOUT) −0.5V to +7V Supply Voltage Data Retention (VCC) DC Input Diode Current (IIK) 1.65V to 5.5V 1.5V to 5.5V Input Voltage (VIN) 0V to 5.5V @VIN < −0.5V −50 mA Output Voltage (VOUT) @VIN > 6V +20 mA Operating Temperature (TA) 0V to VCC −40°C to +85°C Thermal Resistance (θJA) DC Output Diode Current (IOK) @VOUT < −0.5V −50 mA @VOUT > 6V, VCC = GND +20 mA 250°C/W ±50 mA DC Output Current (IOUT) ±50 mA DC VCC/GND Current (ICC/IGND) −65°C to +150 °C Storage Temperature (TSTG) 150 °C Junction Temperature under Bias (TJ) Junction Lead Temperature (T1); Note 1: Absolute maximum ratings are DC values beyond which the device may be damaged or have its useful life impaired. The datasheet specification should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. Fairchild does not recommend operation outside datasheet specifications. 260 °C (Soldering, 10 seconds) Power Dissipation (PD) @ +85°C 250 mW Note 2: Unused inputs must be held HIGH or LOW. They may not float. DC Electrical Characteristics Symbol VP VN VH VOH Parameter TA = +25°C VCC TA = −40°C to +85°C (V) Min Typ Max Min Max Positive Threshold 1.65 0.7 1.1 1.5 0.7 1.5 Voltage 2.3 1.0 1.4 1.8 1.0 1.8 3.0 1.3 1.75 2.2 1.3 2.2 4.5 1.9 2.45 3.1 1.9 3.1 3.6 5.5 2.2 2.9 3.6 2.2 Negative Threshold 1.65 0.25 0.55 0.9 0.25 0.9 Voltage 2.3 0.40 0.75 1.15 0.40 1.15 3.0 0.6 1.0 1.5 0.6 1.5 4.5 1.0 1.43 2.0 1.0 2.0 2.3 Hysteresis Voltage 5.5 1.2 1.70 2.3 1.2 1.65 0.15 0.54 1.0 0.15 1.0 2.3 0.25 0.65 1.1 0.25 1.1 3.0 0.4 0.77 1.2 0.4 1.2 4.5 0.6 1.01 1.5 0.6 1.5 1.7 0.7 1.7 Unit Conditions V V V 5.5 0.7 1.18 HIGH Level 1.65 1.55 1.65 Output Voltage 2.3 2.2 2.3 2.2 3.0 2.9 3.0 2.9 4.5 4.4 4.5 4.4 1.65 1.29 1.52 1.29 2.3 1.9 2.15 1.9 IOH = −8 mA 3.0 2.4 2.80 2.4 IOH = −16 mA 3.0 2.3 2.68 2.3 IOH = −24 mA 4.5 3.8 4.20 3.8 IOH = −32 mA www.fairchildsemi.com 1.55 2 VIN = VIL V IOH = −100 µA IOH = −4 mA Symbol TA = +25°C (V) VOL (Continued) VCC Parameter Min Typ TA = −40°C to +85°C Max Min 1.65 0.0 0.1 0.1 Output Voltage 2.3 0.0 0.1 0.1 3.0 0.0 0.1 0.1 Input Leakage Current IOFF Power Off Leakage Current ICC Quiescent Supply Current Unit Conditions Max LOW Level IIN NC7NZ14 DC Electrical Characteristics VIN = VIH IOL = 100 µA 4.5 0.0 0.1 0.1 1.65 0.08 0.24 0.24 2.3 0.10 0.3 0.3 IOL = 8 mA 3.0 0.15 0.4 0.4 IOL = 16 mA 3.0 0.22 0.55 0.55 IOL = 24 mA 4.5 0.22 0.55 0.55 0 to 5.5 ±0.1 ±1.0 µA VIN = 5.5V, GND 0.0 1 10 µA VIN or VOUT = 5.5V 1.65 to 5.5 1 10 µA VIN = 5.5V, GND IOL = 4 mA V IOL = 32 mA AC Electrical Characteristics Symbol tPLH, Parameter Propagation Delay tPHL tPLH, Propagation Delay tPHL TA = +25°C VCC (V) TA = −40°C to +85°C Min Typ Max Min Max 1.8 ± 0.15 2.0 7.6 12.5 2.0 13 2.5 ± 0.2 1.0 5.0 9.0 1.0 9.5 3.3 ± 0.3 1.0 3.7 6.3 1.0 6.5 5.0 ± 0.5 0.5 3.1 5.2 0.5 5.5 3.3 ± 0.3 1.5 4.4 7.2 1.5 7.5 5.0 ± 0.5 0.8 3.7 5.9 0.8 6.2 CIN Input Capacitance 0 2.5 CPD Power Dissipation 3.3 9 Capacitance 5.0 11 Unit ns ns Conditions CL = 15 pF, RL = 1 MΩ CL = 50 pF, Figure Number Figures 1, 3 RL = 500Ω Figures 1, 3 (Note 3) Figure 2 pF pF Note 3: CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (ICCD) at no output loading and operating at 50% duty cycle. (See Figure 2.) CPD is related to ICCD dynamic operating current by the expression: ICCD = (C PD) (VCC) (fIN) + (ICC static). Dynamic Switching Characteristics Symbol Parameter Conditions VCC TA = 25°C (V) Typical Unit VOLP Quiet Output Dynamic Peak VOL CL = 50pF, VIH = 5.0V, VIL = 0V 5.0 0.8 V VOLV Quiet Output Dynamic Valley VOL CL = 50pF, VIH = 5.0V, VIL = 0V 5.0 −0.8 V 3 www.fairchildsemi.com NC7NZ14 AC Loading and Waveforms CL includes load and stray capacitance Input PRR = 1.0 MHz; tw = 500 ns FIGURE 1. AC Test Circuit Input = AC Waveform; tr = tf = 1.8 ns FIGURE 3. AC Waveforms PRR = 10 MHz; Duty Cycle = 50% FIGURE 2. ICCD Test Circuit www.fairchildsemi.com 4 TAPE FORMAT Package Tape Number Cavity Section Cavities Status Status Leader (Start End) 125 (typ) Empty Sealed Designator K8X Cover Tape Carrier 3000 Filled Sealed Trailer (Hub End) 75 (typ) Empty Sealed Cover Tape TAPE DIMENSIONS inches (millimeters) TAPE FORMAT for MicroPak Package Designator Tape Number Cavity Section Cavities Status Status 125 (typ) Empty Sealed 3000 Filled Sealed 75 (typ) Empty Sealed Leader (Start End) L8X Carrier Trailer (Hub End) TAPE DIMENSIONS inches (millimeters) 5 www.fairchildsemi.com NC7NZ14 Tape and Reel Specification NC7NZ14 Tape and Reel Specification (Continued) REEL DIMENSIONS inches (millimeters) Tape Size 8 mm A B C D N W1 W2 W3 7.0 0.059 0.512 0.795 2.165 0.331 +0.059/−0.000 0.567 W1 + 0.078/−0.039 (177.8) (1.50) (13.00) (20.20) (55.00) (8.40 + 1.50/−0.00) (14.40) (W1 + 2.00/−1.00) www.fairchildsemi.com 6 NC7NZ14 Physical Dimensions inches (millimeters) unless otherwise noted 8-Lead US8, JEDEC MO-187, Variation CA 3.1mm Wide Package Number MAB08A 7 www.fairchildsemi.com NC7NZ14 TinyLogic UHS Inverter with Schmitt Trigger Input Physical Dimensions inches (millimeters) unless otherwise noted (Continued) Pb-Free 8-Lead MicroPak, 1.6 mm Wide Package Number MAC08A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com www.fairchildsemi.com 8