Fairchild NC7SP04 Nc7sp04 â tinylogicâ® ulp inverter Datasheet

NC7SP04 — TinyLogic® ULP Inverter
Features
Description
ƒ
ƒ
The NC7SP04 is a single inverter from Fairchild’s Ultra
Low Power (ULP) series of TinyLogic®. Ideal for
applications where battery life is critical, this product is
designed for ultra low power consumption within the VCC
operating range of 0.9V to 3.6V.
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
0.9V to 3.6V VCC Supply Operation
3.6V Over-Voltage Tolerant I/Os at VCC from
0.9V to 3.6V
Propagation Delay (tPD):
‚ 4.0ns Typical for 3.0V to 3.6V VCC
‚ 5.0ns Typical for 2.3V to 2.7V VCC
‚ 6.0ns Typical for 1.65V to 1.95V VCC
‚ 7.0ns Typical for 1.40V to 1.60V VCC
‚ 11.0ns Typical for 1.10V to 1.30V VCC
‚ 27.0ns Typical for 0.90V VCC
Power-Off High-Impedance Inputs and Outputs
Static Drive (IOH/IOL):
‚ ± 2.6mA at 3.00V VCC
‚ ± 2.1mA at 2.30V VCC
‚ ± 1.5mA at 1.65V VCC
‚ ± 1.0mA at 1.40V VCC
‚ ± 0.5mA at 1.10V VCC
‚ ± 20µA at 0.9V VCC
Quiet Series™ Noise / EMI Reduction Circuitry
The internal circuit is composed of a minimum of
inverter stages, including the output buffer, to enable
ultra low static and dynamic power.
The NC7SP04, for lower drive requirements, is uniquely
designed for optimized power and speed and is
fabricated with an advanced CMOS technology to
achieve best-in-class speed of operation, while
maintaining extremely low CMOS power dissipation.
Related Resources
ƒ
AN-5055 — Portability and Ultra Low Power
TinyLogic®
Ultra Small MicroPak™ Packages
Ultra Low Dynamic Power
Ordering Information
Part Number
Top Mark
NC7SP04P5X
P04
NC7SP04L6X
NC7SP04FHX
Package
Packing Method
5-Lead SC70, EIAJ SC-88a, 1.25mm Wide
3000 Units on
Tape & Reel
J6
6-Lead MicroPak™, 1.00mm Wide
5000 Units on
Tape & Reel
J6
6-Lead, MicroPak2™, 1x1mm Body, .35mm Pitch
5000 Units on
Tape & Reel
Notes:
1. TinyLogic ULP and ULP-A with up to 50% less power
consumption can extend battery life significantly.
2. Battery Life=(Vbattery x Ibattery x 0.9) / (Pdevice) / 24hrs/day;
where, Pdevice=(ICC x VCC) + (CPD + CL)
2
x VCC x f.
3. Assumes ideal 3.6V Lithium Ion battery with current
rating of 900mAH and derated 90% and device
frequency at 10MHz, with CL=15pF load.
Figure 1. Battery Life vs. VCC Supply Voltage
© 2001 Fairchild Semiconductor Corporation
NC7SP04 • Rev. 1.0.5
www.fairchildsemi.com
NC7SP04 — TinyLogic® ULP Inverter
December 2010
NC7SP04 — TinyLogic® ULP Inverter
Connection Diagrams
IEEE/IEC
A
1
Y
Figure 2. Logic Symbol
Pin Configurations
NC
1
A
2
GND
3
5
4
VCC
Y
Figure 3. SC70 (Top View)
NC
1
6
VCC
A
2
5
NC
GND
3
4
Y
Figure 4. MicroPak™ (Top Through View)
Function Table
Inputs
Output
A
Y
L
H
H
L
L = Low Logic Level
H = High Logic Level
Pin Definitions
Pin # SC70
Pin # MicroPak™
Name
1
1, 5
NC
2
2
A
3
3
GND
Ground
4
4
Y
Output
5
6
VCC
© 2001 Fairchild Semiconductor Corporation
NC7SP04 • Rev. 1.0.5
Description
No Connect
Input
Supply Voltage
www.fairchildsemi.com
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device
reliability. The absolute maximum ratings are stress ratings only.
Symbol
Parameter
Min.
Max.
Unit
VCC
Supply Voltage
-0.5
4.6
V
VIN
DC Input Voltage
-0.5
4.6
V
-0.5
VCC to +0.5
V
-0.5
4.6
V
-50
mA
VOUT
IIK
IOK
IOH / IOL
DC Output Voltage
HIGH or LOW State
(4)
VCC=0V
DC Input Diode Current at VIN < 0V
DC Output Diode Current
VOUT < 0V
-50
VOUT > VCC
+50
DC Output Source/Sink Current
ICC or Ground DC VCC or Ground Current per Supply Pin
TSTG
Storage Temperature Range
-65
TJ
Junction Temperature Under Bias
TL
Junction Lead Temperature (Soldering, 10 Seconds)
SC70-5
PD
ESD
Power Dissipation at +85°C
mA
±50
mA
±50
mA
+150
°C
+150
°C
+260
°C
NC7SP04 — TinyLogic® ULP Inverter
Absolute Maximum Ratings
150
MicroPak™-6
130
MicroPak2™-6
120
mW
Human Body Model
JEDEC: JESD22-A114
4000
Charged Device Model
JEDEC: JESD22-C101
2000
V
Note:
4. The IO maximum rating must be observed.
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to Absolute Maximum Ratings.
Symbol
Parameter
VCC
Supply Voltage
VIN
(5)
VOUT
IOH / IOL
TA
Δt / ΔV
θJA
Input Voltage
Output Voltage
Output Current in IOH / IOL
Conditions
Thermal Resistance
Max.
Unit
0.9
3.6
V
V
0
3.6
HIGH or LOW State
0
VCC
VCC=0V
0
3.6
V
VCC=3.0V to 3.6V
±2.6
VCC=2.3V to 2.7V
±2.1
VCC=1.65V to 1.95V
±1.5
VCC=1.40V to 1.60V
±1.0
VCC=1.10V to 1.30V
±0.5
VCC=0.9V
20.0
Free Air Operating Temperature
Minimum Input Edge Rate
Min.
-40
mA
µA
+85
°C
VIN=0.8V to 2.0V, VCC=3.0V
10
ns/V
SC70-5
425
MicroPak™-6
500
MicroPak2™-6
560
°C/W
Note:
5. Unused inputs must be held HIGH or LOW. They may not float.
© 2001 Fairchild Semiconductor Corporation
NC7SP04 • Rev. 1.0.5
www.fairchildsemi.com
Symbol
VIH
VIL
Parameter
HIGH Level Input
Voltage
LOW Level Input
Voltage
VCC
Min.
Min.
0.65 x VCC
1.10 ≤ VCC ≤ 1.30
0.65 x VCC
0.65 x VCC
1.40 ≤ VCC ≤ 1.60
0.65 x VCC
0.65 x VCC
1.65 ≤ VCC ≤ 1.95
0.65 x VCC
0.65 x VCC
2.30 ≤ VCC ≤ 2.70
1.6
1.6
3.00 ≤ VCC ≤ 3.60
2.1
2.1
V
0.35 x VCC
0.35 x VCC
1.10 ≤ VCC ≤ 1.30
0.35 x VCC
0.35 x VCC
1.40 ≤ VCC ≤ 1.60
0.35 x VCC
0.35 x VCC
1.65 ≤ VCC ≤ 1.95
0.35 x VCC
0.35 x VCC
2.30 ≤ VCC ≤ 2.70
0.7
0.7
3.00 ≤ VCC ≤ 3.60
0.9
0.9
0.90
VCC - 0.1
VCC - 0.1
1.10 ≤ VCC ≤ 1.30
VCC - 0.1
VCC - 0.1
VCC - 0.1
VCC - 0.1
VCC - 0.1
VCC - 0.1
VCC - 0.1
VCC - 0.1
IOH=-20µA
2.30 ≤ VCC ≤ 2.70
3.00 ≤ VCC ≤ 3.60
VCC - 0.1
VCC - 0.1
0.75 x VCC
0.75 x VCC
IOH=-1mA
1.07
0.99
IOH=-1.5mA
1.24
1.22
2.30 ≤ VCC ≤ 2.70
IOH=-2.1mA
1.95
1.87
3.00 ≤ VCC ≤ 3.60
IOH=-2.6mA
2.61
2.55
1.10 ≤ VCC ≤ 1.30
IOH=-0.5mA
1.40 ≤ VCC ≤ 1.60
1.65 ≤ VCC ≤ 1.95
0.1
0.1
1.10 ≤ VCC ≤ 1.30
0.1
0.1
1.40 ≤ VCC ≤ 1.60
0.1
0.1
0.1
0.1
0.1
0.1
2.30 ≤ VCC ≤ 2.70
LOW Level Output
3.00 ≤ VCC ≤ 3.60
Voltage
1.10 ≤ VCC ≤ 1.30
IOL=0.5mA
V
V
0.90
IOL=20µA
Units
Max.
0.90
1.65 ≤ VCC ≤ 1.95
VOL
Max.
TA=-40 to 85°C
0.65 x VCC
1.65 ≤ VCC ≤ 1.95
VOH
TA=25°C
0.90
1.40 ≤ VCC ≤ 1.60
HIGH Level
Output Voltage
Conditions
0.1
0.1
0.30 x VCC
0.30 x VCC
V
1.40 ≤ VCC ≤ 1.60
IOL=1mA
0.31
0.37
1.65 ≤ VCC ≤ 1.95
IOL=1.5mA
0.31
0.35
2.30 ≤ VCC ≤ 2.70
IOL=2.1mA
0.31
0.33
3.00 ≤ VCC ≤ 3.60
IOL=2.6mA
0.31
0.33
Input Leakage
Current
0.90 to 3.60
0 ≤ VI ≤ 3.6V
±0.1
±0.5
µA
IOFF
Power Off
0
0 ≤ (VO, VI) ≤ 3.6V
0.5
0.5
µA
ICC
Quiescent Supply
Current
0.90 to 3.60
VIN=VCC or GND
0.9
0.9
µA
IIN
© 2001 Fairchild Semiconductor Corporation
NC7SP04 • Rev. 1.0.5
NC7SP04 — TinyLogic® ULP Inverter
DC Electrical Characteristics
www.fairchildsemi.com
Symbol
Parameter
VCC
TA=25°C
Conditions
Min.
0.90
Typ. Max.
Min.
Max.
Units Figure
27.0
1.10 ≤ VCC ≤ 1.30
3.5
11.0
21.8
3.0
34.3
1.40 ≤ VCC ≤ 1.60
2.5
7.0
14.8
2.0
15.0
1.65 ≤ VCC ≤ 1.95
CL=10pF,
RL=1MΩ
2.0
6.0
12.0
1.5
12.2
2.30 ≤ VCC ≤ 2.70
1.5
5.0
9.4
1.0
9.9
3.00 ≤ VCC ≤ 3.60
1.0
4.0
8.3
1.0
9.0
0.90
30.0
1.10 ≤ VCC ≤ 1.30
tPHL, tPLH Propagation Delay
TA=-40 to 85°C
4.0
11.0
22.8
3.5
37.3
3.0
8.0
15.5
2.5
16.5
2.5
6.0
12.6
2.0
13.6
2.30 ≤ VCC ≤ 2.70
2.0
5.0
9.9
1.5
10.8
3.00 ≤ VCC ≤ 3.60
1.5
4.0
8.7
1.0
9.5
1.40 ≤ VCC ≤ 1.60
1.65 ≤ VCC ≤ 1.95
CL=15pF,
RL=1MΩ
0.90
ns
Figure 1,
Figure 2
NC7SP04 — TinyLogic® ULP Inverter
AC Electrical Characteristics
32.0
1.10 ≤ VCC ≤ 1.30
5.0
13.0
25.9
4.0
46.3
1.40 ≤ VCC ≤ 1.60
4.0
9.0
17.8
3.5
18.2
1.65 ≤ VCC ≤ 1.95
CL=30pF,
RL=1MΩ
3.0
7.0
14.4
2.0
15.9
2.30 ≤ VCC ≤ 2.70
2.0
6.0
11.3
1.5
12.8
3.00 ≤ VCC ≤ 3.60
1.5
5.0
9.2
1.0
10.7
CIN
Input Capacitance
0
CPD
Power Dissipation
Capacitance
0.90 to 3.60
VIN=0V or VCC,
f=10MHz
Figure 5. AC Test Circuit
2
pF
8
pF
Figure 6. AC Waveforms
Symbol
VCC
3.3V ± 0.3V
2.5V ± 0.2V
1.8V ± 0.15V
1.5V ± 0.1V
1.2V ± 0.1V
0.9V
Vmi
1.5V
VCC / 2
VCC / 2
VCC / 2
VCC / 2
VCC / 2
Vmo
1.5V
VCC / 2
VCC / 2
VCC / 2
VCC / 2
VCC / 2
© 2001 Fairchild Semiconductor Corporation
NC7SP04 • Rev. 1.0.5
www.fairchildsemi.com
NC7SP04 — TinyLogic® ULP Inverter
Physical Dimensions
Figure 7. 5-Lead, SC70, EIAJ SC-88a, 1.25mm Wide
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify
or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically
the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/.
Tape and Reel Specification
Please visit Fairchild Semiconductor’s online packaging area for the most recent tape and reel specifications:
http://www.fairchildsemi.com/products/analog/pdf/sc70-5_tr.pdf.
Package Designator
P5X
© 2001 Fairchild Semiconductor Corporation
NC7SP04 • Rev. 1.0.5
Tape Section
Cavity Number
Cavity Status
Cover Type Status
Leader (Start End)
125 (Typical)
Empty
Sealed
Carrier
3000
Filled
Sealed
Trailer (Hub End)
75 (Typical)
Empty
Sealed
www.fairchildsemi.com
NC7SP04 — TinyLogic® ULP Inverter
Physical Dimensions
2X
0.05 C
1.45
B
2X
(1)
0.05 C
(0.254)
(0.49)
5X
1.00
(0.75)
PIN 1 IDENTIFIER
5
(0.52)
1X
A
TOP VIEW
0.55MAX
(0.30)
6X
PIN 1
0.05 C
0.05
0.00
RECOMMENED
LAND PATTERN
0.05 C
C
0.25
0.15 6X
1.0
DETAIL A
0.10
0.05
0.45
0.35
0.10
0.00 6X
C B A
C
0.40
0.30
0.35 5X
0.25
0.40 5X
0.30
0.5
(0.05)
6X
Notes:
BOTTOM VIEW
(0.13)
4X
DETAIL A
PIN 1 TERMINAL
0.075 X 45
CHAMFER
1. CONFORMS TO JEDEC STANDARD M0-252 VARIATION UAAD
2. DIMENSIONS ARE IN MILLIMETERS
3. DRAWING CONFORMS TO ASME Y14.5M-1994
4. FILENAME AND REVISION: MAC06AREV4
5. PIN ONE IDENTIFIER IS 2X LENGTH OF ANY
OTHER LINE IN THE MARK CODE LAYOUT.
Figure 8. 6-Lead, MicroPak™, 1.0mm Wide
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify
or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically
the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/.
Tape and Reel Specification
Please visit Fairchild Semiconductor’s online packaging area for the most recent tape and reel specifications:
http://www.fairchildsemi.com/products/logic/pdf/micropak_tr.pdf.
Package Designator
L6X
© 2001 Fairchild Semiconductor Corporation
NC7SP04 • Rev. 1.0.5
Tape Section
Cavity Number
Cavity Status
Cover Type Status
Leader (Start End)
125 (Typical)
Empty
Sealed
Carrier
5000
Filled
Sealed
Trailer (Hub End)
75 (Typical)
Empty
Sealed
www.fairchildsemi.com
NC7SP04 — TinyLogic® ULP Inverter
Physical Dimensions
0.89
0.35
0.05 C
1.00
2X
B
A
5X 0.40
PIN 1
MIN 250uM
0.66
1.00
1X 0.45
6X 0.19
0.05 C
TOP VIEW
RECOMMENDED LAND PATTERN
FOR SPACE CONSTRAINED PCB
2X
0.90
0.05 C
0.35
0.55MAX
C
5X 0.52
SIDE VIEW
0.73
(0.08) 4X
1
DETAIL A
2
1X 0.57
0.09
0.19 6X
3
0.20 6X
ALTERNATIVE LAND PATTERN
FOR UNIVERSAL APPLICATION
(0.05) 6X
5X 0.35
0.25
0.35
6
5
4
BOTTOM VIEW
0.60
(0.08)
4X
0.10
.05 C
C B A
0.40
0.30
NOTES:
A. COMPLIES TO JEDEC MO-252 STANDARD
B. DIMENSIONS ARE IN MILLIMETERS.
C. DIMENSIONS AND TOLERANCES PER ASME Y14.5M, 1994
D. LANDPATTERN RECOMMENDATION IS BASED ON FSC
DESIGN.
E. DRAWING FILENAME AND REVISION: MGF06AREV3
0.075X45°
CHAMFER
DETAIL A
PIN 1 LEAD SCALE: 2X
Figure 9. 6-Lead, MicroPak2™, 1x1mm Body, .35mm Pitch
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify
or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically
the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/.
Tape and Reel Specification
Please visit Fairchild Semiconductor’s online packaging area for the most recent tape and reel specifications:
http://www.fairchildsemi.com/packaging/MicroPAK2_6L_tr.pdf.
Package Designator
FHX
© 2001 Fairchild Semiconductor Corporation
NC7SP04 • Rev. 1.0.5
Tape Section
Cavity Number
Cavity Status
Cover Type Status
Leader (Start End)
125 (Typical)
Empty
Sealed
Carrier
5000
Filled
Sealed
Trailer (Hub End)
75 (Typical)
Empty
Sealed
www.fairchildsemi.com
NC7SP04 — TinyLogic® ULP Inverter
© 2001 Fairchild Semiconductor Corporation
NC7SP04 • Rev. 1.0.5
www.fairchildsemi.com
Similar pages