Fairchild NC7ST08P5X Tinylogic hst 2-input and gate Datasheet

Revised June 2000
NC7ST08
TinyLogic HST 2-Input AND Gate
General Description
Features
The NC7ST08 is a single 2-Input high performance CMOS
AND Gate, with TTL-compatible inputs. Advanced Silicon
Gate CMOS fabrication assures high speed and low power
circuit operation. ESD protection diodes inherently guard
both inputs and output with respect to the VCC and GND
rails. High gain circuitry offers high noise immunity and
reduced sensitivity to input edge rate. The TTL-compatible
inputs facilitate TTL to NMOS/CMOS interfacing. Device
performance is similar to MM74HCT but with 1/2 the output
current drive of HC/HCT.
■ Space saving SOT23 or SC70 5-lead package
■ High Speed:
tPD 6 ns (typ), VCC = 5V, CL = 15 pF, TA = 25°C
■ Low Quiescent Power, ICC < 1 µA, VCC = 5.5V
■ Balanced Output Drive; 2 mA IOL, −2 mA IOH
■ TTL-compatible inputs
Ordering Code:
Order
Package
Product Code
Number
Number
Top Mark
NC7ST08M5
MA05B
8S08
5-Lead SOT23, JEDEC MO-178, 1.6mm
NC7ST08M5X
MA05B
8S08
5-Lead SOT23, JEDEC MO-178, 1.6mm
3k Units on Tape and Reel
NC7ST08P5
MAA05A
T08
5-Lead SC70, EIAJ SC-88a, 1.25mm Wide
250 Units on Tape and Reel
NC7ST08P5X
MAA05A
T08
5-Lead SC70, EIAJ SC-88a, 1.25mm Wide
3k Units on Tape and Reel
Package Description
Logic Symbol
Supplied As
250 Units on Tape and Reel
Connection Diagram
IEEE/IEC
(Top View)
Pin Descriptions
Function Table
Pin Names
Description
A, B
Inputs
Y
Output
Y = AB
Inputs
Output
A
B
L
L
Y
L
L
H
L
H
L
L
H
H
H
H = HIGH Logic Level
L = LOW Logic Level
TinyLogic is a trademark of Fairchild Semiconductor Corporation.
© 2000 Fairchild Semiconductor Corporation
DS012182
www.fairchildsemi.com
NC7ST08 TinyLogic HST 2-Input AND Gate
January 1997
NC7ST08
Absolute Maximum Ratings(Note 1)
Recommended Operating
Conditions (Note 2)
−0.5V to +7.0V
Supply Voltage (VCC)
DC Input Diode Current (IIK)
Supply Voltage
4.5V to 5.5V
@VIN < −0.5V
−20 mA
Input Voltage (VIN)
0.0V to VCC
@VIN ≥ VCC + 0.5V
+20 mA
Output Voltage (VOUT)
DC Input Voltage (VIN)
−0.5V to VCC + 0.5V
DC Output Diode Current (IOK)
Input Rise and Fall Time (tr, tf)
VOUT < −0.5V
−20 mA
VOUT > VCC + 0.5V
+20 mA
Output Voltage (VOUT)
0V to VCC
−40°C to +85°C
Operating Temperature (TA)
VCC = 5.0V
0 ns to 500 ns
Thermal Resistance (θJA)
−0.5V to VCC + 0.5V
DC Output Source or Sink Current
SOT23-5
300°C/W
SC70-5
425°C/W
±12.5 mA
(IOUT)
DC VCC or Ground Current per
±25 mA
Supply Pin (ICC or IGND)
−65°C to +150°C
Storage Temperature (TSTG)
150°C
Junction Temperature (TJ)
Lead Temperature (TL);
SOT23-5
200 mW
Note 1: Absolute Maximum Ratings are those values beyond which damage to the device may occur. The databook specifications should be met,
without exception, to ensure that the system design is reliable over its
power supply, temperature, and output/input loading variables. Fairchild
does not recommend operation of circuits outside the databook specifications.
SC70-5
150 mW
Note 2: Unused inputs must be held HIGH or LOW. They may not float.
260°C
(Soldering, 10 seconds)
Power Dissipation (PD) @+85°C
DC Electrical Characteristics
Symbol
Parameter
TA = +25°C
VCC
(V)
Min
2.0
VIH
HIGH Level Input Voltage
4.5–5.5
VIL
LOW Level Input Voltage
4.5–5.5
VOH
HIGH Level Output Voltage
Typ
TA = 40°C to +85°C
Max
Min
Max
2.0
0.8
4.4
4.5
4.4
4.5
4.18
4.35
4.13
Conditions
V
0.8
4.5
Units
V
IOH = −20 µA
V
IOH = −2 mA
VIN = VIH
VOL
LOW Level Output Voltage
IOL = 20 µA
4.5
0
0.1
0.1
4.5
0.10
0.26
0.33
V
IOL = 2 mA
VIN = VIL
IIN
Input Leakage Current
5.5
±0.1
±1.0
V
ICC
Quiescent Supply Current
5.5
1.0
10.0
µA
VIN = VCC or GND
0 ≤ VIN ≤ 5.5V
ICCT
ICC per Input
5.5
2.0
2.9
mA
One input VIN = 0.5V or 2.4V,
other input VCC or GND
www.fairchildsemi.com
2
Symbol
tPLH,
Parameter
Propagation Delay
TA = +25°C
VCC
(V)
Min
5.0
tPHL
4.5
5.5
tTLH,
Output Transition Time
tTHL
CIN
Input Capacitance
CPD
Power Dissipation Capacitance
TA = 40°C to +85°C
Typ
Max
4
12
Min
Max
6
17
6
16
20
12
27
31
5
14
18
11
26
30
5.0
4
10
4.5
11
25
31
5.5
10
21
26
Open
5.0
10
6
Units
Conditions
Fig. No.
ns
CL = 15 pF
ns
CL = 50 pF
ns
CL = 15 pF
ns
CL = 50 pF
Figures
1, 3
(Note 3)
Figure 2
Figures
1, 3
pF
pF
Note 3: CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (ICCD) at no output
loading and operating at 50% duty cycle. (See Figure 2.) CPD is related to ICCD dynamic operating current by the expression:
ICCD = (C PD)(VCC)(fIN) + (ICCstatic).
AC Loading and Waveforms
CL includes load and stray capacitance
Input PRR = 1.0 MHz; tw = 500 ns
FIGURE 1. AC Test Circuit
FIGURE 3. AC Waveforms
Input = AC Waveform; PRR = variable; Duty Cycle = 50%
FIGURE 2. ICCD Test Circuit
3
www.fairchildsemi.com
NC7ST08
AC Electrical Characteristics
NC7ST08
Tape and Reel Specification
TAPE FORMAT
Package
Designator
Tape
Number
Cavity
Section
Cavities
Status
Status
125 (typ)
Empty
Sealed
Sealed
Leader (Start End)
M5, P5
Carrier
M5X, P5X
Cover Tape
250
Filled
Trailer (Hub End)
75 (typ)
Empty
Sealed
Leader (Start End)
125 (typ)
Empty
Sealed
3000
Filled
Sealed
75 (typ)
Empty
Sealed
Carrier
Trailer (Hub End)
TAPE DIMENSIONS inches (millimeters)
Package
SC70-5
SOT23-5
Tape Size
8 mm
8 mm
www.fairchildsemi.com
DIM A
DIM B
0.093
0.096
(2.35)
(2.45)
0.130
0.130
(3.3)
(3.3)
DIM F
DIM Ko
0.138 ± 0.004 0.053 ± 0.004
(3.5 ± 0.10)
(1.35 ± 0.10)
0.138 ± 0.002 0.055 ± 0.004
(3.5 ± 0.05)
4
(1.4 ± 0.11)
DIM P1
DIM W
0.157
0.315 ± 0.004
(4)
(8 ± 0.1)
0.157
0.315 ± 0.012
(4)
(8 ± 0.3)
NC7ST08
Tape and Reel Specification
(Continued)
REEL DIMENSIONS inches (millimeters)
Tape
Size
8 mm
A
B
C
D
N
W1
W2
W3
7.0
0.059
0.512
0.795
2.165
0.331 + 0.059/−0.000
0.567
W1 + 0.078/−0.039
(177.8)
(1.50)
(13.00)
(20.20)
(55.00)
(8.40 + 1.50/−0.00)
(14.40)
(W1 + 2.00/−1.00)
5
www.fairchildsemi.com
NC7ST08
Physical Dimensions inches (millimeters) unless otherwise noted
5-Lead SOT23, JEDEC MO-178, 1.6mm
Package Number MA05B
www.fairchildsemi.com
6
NC7ST08 TinyLogic HST 2-Input AND Gate
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
5-Lead SC70, EIAJ SC-88a, 1.25mm Wide
Package Number MAA05A
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and
Fairchild reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
2. A critical component in any component of a life support
device or system whose failure to perform can be reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the
user.
www.fairchildsemi.com
7
www.fairchildsemi.com
Similar pages