Fairchild NC7SZU04L6X Tinylogic uhs unbuffered inverter Datasheet

Revised August 2004
NC7SZU04
TinyLogic UHS Unbuffered Inverter
General Description
Features
The NC7SZU04 is a single unbuffered inverter from Fairchild’s Ultra High Speed Series of TinyLogic. The special
purpose unbuffered circuit design is primarily intended for
crystal oscillator or analog applications. The device is fabricated with advanced CMOS technology to achieve ultra
high speed with high output drive while maintaining low
static power dissipation over a very broad VCC operating
range. The device is specified to operate over the 1.65V to
5.5V VCC range.
■ Space saving SOT23 or SC70 5-lead package
■ Ultra small MicroPak leadless package
■ Unbuffered for crystal oscillator and analog applications
■ Balanced Output Drive; ± 16 mA at 4.5V VCC
■ Broad VCC Operating Range; 1.65V–5.5V
■ Low Quiescent Power;
ICC < 2 µA, VCC = 5.5V, TA = 25°C
Ordering Code:
Order
Package
Product Code
Number
Number
Top Mark
NC7SZU04M5X
MA05B
7ZU4
5-Lead SOT23, JEDEC MO-178, 1.6mm
3k Units on Tape and Reel
NC7SZU04P5X
MAA05A
ZU4
5-Lead SC70, EIAJ SC-88a, 1.25mm Wide
3k Units on Tape and Reel
NC7SZU04L6X
MAC06A
C5
6-Lead MicroPak, 1.0mm Wide
5k Units on Tape and Reel
Package Description
Logic Symbol
Supplied As
Connection Diagrams
IEEE/IEC
Pin Assignments for SOT23 and SC70
Pin Descriptions
Pin Names
Description
A
Input
Y
Output
NC
No Connect
(Top View)
Pad Assignments for MicroPak
Function Table
Y=A
Input
Output
A
Y
L
H
H
L
H = HIGH Logic Level
L = LOW Logic Level
(Top Thru View)
TinyLogic is a registered trademark of Fairchild Semiconductor Corporation.
MicroPak is a trademark of Fairchild Semiconductor Corporation.
© 2004 Fairchild Semiconductor Corporation
DS012166
www.fairchildsemi.com
NC7SZU04 TinyLogic UHS Unbuffered Inverter
October 1996
NC7SZU04
Absolute Maximum Ratings(Note 1)
Recommended Operating
Conditions (Note 2)
Supply Voltage (VCC )
−0.5V to +6V
DC Input Voltage (VIN)
−0.5V to +6V
Supply Voltage Operating (VCC)
DC Output Voltage (VOUT)
−0.5V to +6V
Supply Voltage Data Retention (VCC)
DC Input Diode Current (IIK)
1.65V to 5.5V
1.5V to 5.5V
Input Voltage (VIN)
0V to 5.5V
@ VIN < −0.5V
−50 mA
Output Voltage (VOUT)
@ VIN > VCC + 0.5V
+20 mA
Operating Temperature (TA)
0V to VCC
−40°C to +85°C
Thermal Resistance (θJA)
DC Output Diode Current (IOK)
@ VOUT < −0.5V
−50 mA
SOT23-5
300°C/W
@ VOUT > 0.5V, VCC = GND
+50 mA
SC70-5
425°C/W
±50 mA
DC Output Current (IOUT)
±100 mA
DC VCC/GND Current (ICC/IGND)
−65°C to +150 °C
Storage Temperature (TSTG)
150 °C
Junction Temperature under Bias (TJ)
Junction Lead Temperature (TL);
SOT23-5
200 mW
Note 1: Absolute maximum ratings are DC values beyond which the device
may be damaged or have its useful life impaired. The datasheet specifications should be met, without exception, to ensure that the system design is
reliable over its power supply, temperature, and output/input loading variables. Fairchild does not recommend operation outside datasheet specifications.
SC70-5
150 mW
Note 2: Unused inputs must be held HIGH or LOW. They may not float.
260 °C
(Soldering, 10 seconds)
Power Dissipation (PD) @ +85°C
DC Electrical Characteristics
Symbol
Parameter
TA = +25°C
VCC
(V)
Min
VIH
HIGH Level Input Voltage
1.8 to 2.7
0.85 VCC
3.0 to 5.5
0.8 VCC
VIL
LOW Level Input Voltage
1.8 to 2.7
VOH
HIGH Level Output Voltage
Typ
LOW Level Output Voltage
Min
Max
0.85 VCC
0.15 VCC
0.2 VCC
0.2 VCC
1.65
1.55
1.65
1.55
1.8
1.6
1.8
1.6
2.3
2.1
2.3
2.1
3.0
2.7
3.0
2.7
Units
Conditions
V
0.8 VCC
0.15 VCC
3.0 to 5.5
VOL
TA = −40°C to +85°C
Max
V
V
VIN = VIL
IOH = −100 µA
4.5
4.0
4.4
4.0
1.65
1.29
1.52
1.29
IOH = −4 mA
2.3
1.9
2.14
1.9
IOH = −4 mA
3.0
2.4
2.75
2.4
3.0
2.3
2.61
2.3
4.5
3.8
4.13
3.8
V
VIN = GND IOH = −8 mA
IOH = −12 mA
IOH = −16 mA
1.65
0.0
0.1
0.1
1.8
0.0
0.2
0.2
2.3
0.0
0.2
0.2
3.0
0.0
0.3
0.3
V
VIN = VIH
IOL = 100 µA
4.5
0.0
0.5
0.5
1.65
0.08
0.24
0.24
IOL = 4 mA
2.3
0.10
0.3
0.3
IOL = 4 mA
3.0
0.17
0.4
0.4
3.0
0.25
0.55
0.55
4.5
0.26
0.55
0.55
±1
±10
µA
VIN = 5.5V, GND
2.0
20
µA
VIN = 5.5V, GND
VIN = VCC
IOL = 8 mA
IOL = 12 mA
IOL = 16 mA
IIN
Input Leakage Current
ICC
Quiescent Supply Current
ICCPEAK
Peak Supply Current in
1.8
2
VOUT = Open
Analog Operation
2.5
4
VIN = Adjust for
3.3
10
5.0
30
www.fairchildsemi.com
0 to 5.5
V
1.65 to 5.5
mA
2
Peak ICC Current
Symbol
tPLH,
Parameter
Propagation Delay
tPHL
tPLH,
Propagation Delay
tPHL
TA = +25°C
VCC
(V)
Min
1.65
1.0
1.8
1.0
2.5 ± 0.2
Typ
TA = −40°C to +85°C
Max
Min
Max
11.7
1.0
12.1
8.5
1.0
9.0
0.8
6.2
0.8
6.5
3.3 ± 0.3
0.5
4.5
0.5
4.8
5.0 ± 0.5
0.5
3.9
0.5
4.1
3.3 ± 0.3
1.0
6.0
1.0
6.5
5.0 ± 0.5
0.8
5.0
0.8
5.5
CIN
Input Capacitance
0
4.5
CPD
Power Dissipation
3.3
6.3
Capacitance
5.0
9.5
Units
ns
Conditions
CL = 15 pF,
RL = 1 MΩ
ns
CL = 50 pF,
Figure
Number
Figures
1, 3
RL = 500Ω
Figures
1, 3
(Note 3)
Figure 2
pF
pF
Note 3: CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (ICCD) at no output
loading and operating at 50% duty cycle. (See Figure 2.) CPD is related to ICCD dynamic operating current by the expression:
ICCD = (C PD)(VCC)(fIN) + (ICCstatic).
AC Loading and Waveforms
CL includes load and stray capacitance
Input PRR = 1.0 MHz; tW = 500 ns
FIGURE 1. AC Test Circuit
FIGURE 3. AC Waveforms
Application Note: When operating the NC7SZU04’s unbuffered output
stage in its linear range, as in oscillator applications, care must be taken to
observe maximum power rating for the device and package. The high drive
nature of the design of the output stage will result in substantial simultaneous conduction currents when the stage is in the linear region. See the
ICCPEAK specification in the DC Electrical Characteristics table.
Input = AC Waveform; tr = tf = 1.8 ns;
PRR = variable; Duty Cycle = 50%
FIGURE 2. ICCD Test Circuit
3
www.fairchildsemi.com
NC7SZU04
AC Electrical Characteristics
NC7SZU04
Tape and Reel Specification
TAPE FORMAT for SOT23 and SC70
Package
Tape
Designator
M5X, P5X
Number
Cavity
Section
Cavities
Status
Cover Tape
Status
Leader (Start End)
125 (typ)
Empty
Sealed
Carrier
3000
Filled
Sealed
Trailer (Hub End)
75 (typ)
Empty
Sealed
TAPE DIMENSIONS inches (millimeters)
Package
SC70-5
SOT23-5
Tape Size
8 mm
8 mm
www.fairchildsemi.com
DIM A
DIM B
0.093
0.096
(2.35)
(2.45)
0.130
0.130
(3.3)
(3.3)
DIM F
DIM Ko
0.138 ± 0.004 0.053 ± 0.004
(3.5 ± 0.10)
(1.35 ± 0.10)
0.138 ± 0.002 0.055 ± 0.004
(3.5 ± 0.05)
4
(1.4 ± 0.11)
DIM P1
DIM W
0.157
0.315 ± 0.004
(4)
(8 ± 0.1)
0.157
0.315 ± 0.012
(4)
(8 ± 0.3)
TAPE FORMAT for MicroPak
Package
(Continued)
Tape
Number
Cavity
Section
Cavities
Status
Status
Leader (Start End)
125 (typ)
Empty
Sealed
Designator
L6X
Cover Tape
Carrier
5000
Filled
Sealed
Trailer (Hub End)
75 (typ)
Empty
Sealed
REEL DIMENSIONS inches (millimeters)
Tape
Size
8 mm
A
B
C
D
N
W1
W2
W3
7.0
0.059
0.512
0.795
2.165
0.331 + 0.059/−0.000
0.567
W1 + 0.078/−0.039
(177.8)
(1.50)
(13.00)
(20.20)
(55.00)
(8.40 + 1.50/−0.00)
(14.40)
(W1 + 2.00/−1.00)
5
www.fairchildsemi.com
NC7SZU04
Tape and Reel Specification
NC7SZU04
Physical Dimensions inches (millimeters) unless otherwise noted
5-Lead SOT23, JEDEC MO-178, 1.6mm
Package Number MA05B
www.fairchildsemi.com
6
NC7SZU04
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
5-Lead SC70, EIAJ SC-88a, 1.25mm Wide
Package Number MAA05A
7
www.fairchildsemi.com
NC7SZU04 TinyLogic UHS Unbuffered Inverter
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
6-Lead MicroPak, 1.0mm Wide
Package Number MAC06A
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and
Fairchild reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
2. A critical component in any component of a life support
device or system whose failure to perform can be reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the
user.
www.fairchildsemi.com
www.fairchildsemi.com
8
Similar pages