Fairchild NC7WZ14P6X Tinylogicâ® uhs dual inverter with schmitt trigger input Datasheet

NC7WZ14
TinyLogic® UHS Dual Inverter with Schmitt Trigger
Inputs
Features
Description

Ultra-High Speed: tPD 3.2ns (Typical) into 50pF at
5V VCC



High Output Drive: ±24mA at 3V VCC


Power Down High Impedance Inputs/Outputs
The NC7WZ14 is a dual inverter with Schmitt trigger input
from Fairchild's Ultra-High Speed (UHS) Series of
TinyLogic. The device is fabricated with advanced CMOS
technology to achieve ultra-high speed with high output
drive while maintaining low static power dissipation over a
very broad VCC operating range. The device is specified to
operate over the 1.65V to 5.5V VCC range. The inputs and
outputs are high-impedance when VCC is 0V. Inputs
tolerate voltages up to 7V independent of VCC operating
voltage. Schmitt trigger inputs achieve typically 1V
hysteresis between the positive-and negative-going input
threshold voltage at 5V.



Proprietary Noise/EMI Reduction Circuitry
Broad VCC Operating Range: 1.65V to 5.5V
Matches Performance of LCX when Operated at
3.3V VCC
Over-Voltage Tolerance Inputs Facilitate 5V to 3V
Translation
Ultra-Small MicroPak™ Packages
Space-Saving SC70 Package
Ordering Information
Operating
Temperature
Top
Mark
NC7WZ14P6X
-40 to +85°C
Z14
6-Lead SC70, EIAJ SC-88a, 1.25mm Wide
3000 Units on
Tape & Reel
NC7WZ14EP6X
-40 to +125°C
Z14
6-Lead SC70, EIAJ SC-88a, 1.25mm Wide
3000 Units on
Tape & Reel
NC7WZ14L6X
-40 to +85°C
A9
6-Lead MicroPak™, 1.00mm Wide
5000 Units on
Tape & Reel
NC7WZ14FHX
-40 to +85°C
A9
6-Lead, MicroPak2, 1x1mm Body, .35mm Pitch
5000 Units on
Tape & Reel
Part Number
© 1999 Fairchild Semiconductor Corporation
NC7WZ14 • Rev. 1.0.7
Package
Packing
Method
www.fairchildsemi.com
NC7WZ14 — TinyLogic® UHS Dual Inverter with Schmitt Trigger Inputs
June 2011
IEEC/IEC
Figure 1. Logic Symbol
Pin Configurations
Figure 2. SC70 (Top View)
A1
1
6
Y1
GND
2
5
VCC
A2
3
4
Y2
Figure 3. MicroPak (Top Through View)
AAA
Pin One
Notes:
1. AAA represents Product Code Top Mark (see ordering code).
2. Orientation of Top Mark determines Pin One location. Read the top product code mark left to right.
Pin One is the lower left pin.
Figure 4. SC70 Pin 1 Orientation
NC7WZ14 — TinyLogic® UHS Dual Inverter with Schmitt Trigger Inputs
Connection Diagrams
Pin Definitions
Pin # SC70
Pin # MicroPak
Name
Description
1
1
A1
2
2
GND
3
3
A2
Input
4
4
Y2
Output
5
5
VCC
Supply Voltage
6
6
Y1
Output
Input
Ground
Function Table
Y= /A
Inputs
Output
A
Y
L
H
H
L
H = HIGH Logic Level
L = LOW Logic Level
© 1999 Fairchild Semiconductor Corporation
NC7WZ14 • Rev. 1.0.7
www.fairchildsemi.com
2
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Symbol
Parameter
Min.
Max.
Unit
VCC
Supply Voltage
-0.5
7.0
V
VIN
DC Input Voltage
-0.5
7.0
V
VOUT
7.0
V
IIK
DC Input Diode Current
VIN < -0.5V
-50
mA
IOK
DC Output Diode Current
VOUT < -0.5V
-50
mA
IOUT
DC Output Current
±100
mA
DC VCC or Ground Current
±50
mA
+150
°C
+150
°C
+260
°C
ICC or IGND
TSTG
DC Output Voltage
-0.5
Storage Temperature Range
-65
TJ
Junction Temperature Under Bias
TL
Junction Lead Temperature (Soldering, 10 Seconds)
SC70-6
PD
ESD
Power Dissipation
TA=85°C
170
TA=125°C
104
MicroPak-6
130
MicroPak2-6
120
Human Body Model, JEDEC:JESD22-A114
4000
Charge Device Model, JEDEC:JESD22-C101
2000
mW
V
Recommended Operating Conditions(3)
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to Absolute Maximum Ratings.
Symbol
VCC
VIN
VOUT
TA
JA
Parameter
Conditions
Min.
Max.
Supply Voltage Operating
1.65
5.50
Supply Voltage Data Retention
1.5
5.5
0
5.5
V
V
Input Voltage
Output Voltage
Operating Temperature
Thermal Resistance
0
VCC
SC70-6
-40
+125
MicroPak-6
-40
+85
MicroPak2-6
-40
+85
SC70-6
390
MicroPak-6
500
MicroPak2-6
560
NC7WZ14 — TinyLogic® UHS Dual Inverter with Schmitt Trigger Inputs
Absolute Maximum Ratings
Unit
V
°C
°C/W
Note:
3. Unused inputs must be held HIGH or LOW. They may not float.
© 1999 Fairchild Semiconductor Corporation
NC7WZ14 • Rev. 1.0.7
www.fairchildsemi.com
3
Symbol
Parameter
VCC (V)
TA=-40 to
+85°C
TA=+25°C
Conditions
Min. Typ. Max.
VP
VN
VH
Positive Threshold
Voltage
Negative Threshold
Voltage
Hysteresis Voltage
0.60
1.40
0.60
1.40
0.60
1.40
1.50
0.70
1.50
0.70
1.50
2.30
1.00
1.80
1.00
1.80
1.00
1.80
3.00
1.30
2.20
1.30
2.20
1.30
2.20
4.50
1.90
3.10
1.90
3.10
2.00
3.20
5.50
2.20
3.60
2.20
3.60
2.30
3.70
1.65
0.20
0.50
0.80
0.20
0.80
0.30
0.90
1.80
0.25
0.56
0.90
0.25
0.90
0.35
1.00
2.30
0.40
0.75
1.15
0.40
1.15
0.50
1.20
3.00
0.60
0.98
1.50
0.60
1.50
0.70
1.60
4.50
1.00
1.42
2.00
1.00
2.00
1.10
2.20
5.50
1.20
1.68
2.30
1.20
2.30
1.40
2.50
1.65
0.10
0.48
0.90
0.10
0.90
0.10
0.90
1.80
0.15
0.51
1.00
0.15
1.00
0.15
1.00
2.30
0.25
0.62
1.10
0.25
1.10
0.25
1.10
3.00
0.40
0.76
1.20
0.40
1.20
0.40
1.20
4.50
0.60
1.01
1.50
0.60
1.50
0.60
1.50
1.70
0.70
1.70
0.70
1.70
5.50
0.70
1.20
1.65
1.55
1.65
1.55
1.55
1.70
1.80
1.70
1.70
2.20
2.30
2.20
2.20
2.90
3.00
2.90
2.90
VIN=VIL,
IOH=-100µA
4.50
4.40
4.50
4.40
4.40
1.65
IOH=-4mA
1.29
1.52
1.29
1.26
2.30
IOH=-8mA
1.90
2.14
1.90
1.80
3.00
IOH=-16mA
2.40
2.75
2.40
2.30
3.00
IOH=-24mA
2.30
2.62
2.30
2.20
4.50
IOH=-32mA
3.80
4.13
0.10
0.10
0.10
1.80
0.00
0.10
0.10
0.10
0.00
0.10
0.10
0.10
0.00
0.10
0.10
0.10
3.00
IIN
Input Leakage
Current
IOFF
Power Off Leakage
Current
ICC
Quiescent Supply
Current
© 1999 Fairchild Semiconductor Corporation
NC7WZ14 • Rev. 1.0.7
4.50
1.65
IOL=4mA
V
V
3.70
0.00
VIN=VIH,
IOL=100µA
V
V
1.65
2.30
LOW Level Output
Voltage
3.80
Units
Max.
0.70
3.00
VOL
Min.
1.65
2.30
HIGH Level Output
Voltage
Max.
1.80
1.80
VOH
Min.
TA=-40 to
+125°C
0.00
0.10
0.10
0.10
0.08
0.24
0.24
0.26
V
2.30
IOL=8mA
0.10
0.30
0.30
0.32
3.00
IOL=16mA
0.16
0.40
0.40
0.43
3.00
IOL=24mA
0.24
0.55
0.55
0.60
4.50
IOL=32mA
0.25
0.55
0.55
0.60
±0.1
±1.0
±2.0
µA
1
10
20
µA
1.0
10
20
µA
0 to 5.5
0
1.65 to
5.50
VIN=5.5V, GND
VIN or
VOUT=5.5V
VIN=5.5V, GND
NC7WZ14 — TinyLogic® UHS Dual Inverter with Schmitt Trigger Inputs
DC Electrical Characteristics
www.fairchildsemi.com
4
Symbol
Parameter
VCC (V)
TA=+25°C
Conditions
TA=-40 to
+85°C
TA=-40 to
+125°C
Units Figure
Min. Typ. Max. Min. Max. Min. Max.
1.65
2.5
7.6
13.1
2.5
14.5
2.5
14.7
1.80
2.5
6.3
10.9
2.5
12.0
2.5
12.3
1.8
4.3
7.4
1.8
8.1
1.8
8.4
3.30 ± 0.30
1.5
3.3
5.0
1.5
5.5
1.5
5.8
5.00 ± 0.50
1.0
2.7
4.1
1.0
4.5
1.0
4.8
3.30 ± 0.30 CL=50pF,
5.00 ± 0.50 RL=500
1.8
4.0
6.0
1.8
6.6
1.8
6.9
1.2
3.2
4.9
1.2
5.4
1.2
5.7
2.50 ± 0.20
tPLH, tPHL
CIN
CPD
Propagation Delay
CL=15pF,
RL=1M
Input Capacitance
0.00
2.5
Power Dissipation
(4)
Capacitance
3.30
11.0
5.00
12.5
Figure 5
Figure 6
ns
Figure 5
Figure 6
pF
pF
Figure 7
Note:
4. CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating
current consumption (ICCD) at no output loading and operating at 50% duty cycle. CPD is related to ICCD dynamic
operating current by the expression: ICCD=(CPD)(VCC)(fIN)+(ICCstatic).
Note:
5. CL includes load and stray capacitance;
Input PRR=1.0MHz; tW =500ns
Figure 5. AC Test Circuit
NC7WZ14 — TinyLogic® UHS Dual Inverter with Schmitt Trigger Inputs
AC Electrical Characteristics
Figure 6. AC Waveforms
Note:
6. Input=AC Waveform; tr=tf=1.8ns; PRR=variable; Duty Cycle =50%.
Figure 7. ICCD Test Circuit
© 1999 Fairchild Semiconductor Corporation
NC7WZ14 • Rev. 1.0.7
www.fairchildsemi.com
5
NC7WZ14 — TinyLogic® UHS Dual Inverter with Schmitt Trigger Inputs
Physical Dimensions
SYMM
C
L
2.00±0.20
0.65
A
0.50 MIN
6
4
B
PIN ONE
1.25±0.10
1
1.90
3
0.30
0.15
(0.25)
0.40 MIN
0.10
0.65
A B
1.30
LAND PATTERN RECOMMENDATION
1.30
1.00
0.80
SEE DETAIL A
1.10
0.80
0.10 C
0.10
0.00
C
2.10±0.30
SEATING
PLANE
NOTES: UNLESS OTHERWISE SPECIFIED
GAGE
PLANE
(R0.10)
0.25
0.10
0.20
A) THIS PACKAGE CONFORMS TO EIAJ
SC-88, 1996.
B) ALL DIMENSIONS ARE IN MILLIMETERS.
C) DIMENSIONS DO NOT INCLUDE BURRS
OR MOLD FLASH.
D) DRAWING FILENAME: MKT-MAA06AREV6
30°
0°
0.46
0.26
DETAIL A
SCALE: 60X
Figure 8. 6-Lead, SC70, EIAJ SC-88a, 1.25mm Wide
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the
warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/.
Tape and Reel Specification
Please visit Fairchild Semiconductor’s online packaging area for the most recent tape and reel specifications:
http://www.fairchildsemi.com/products/analog/pdf/sc70-6_tr.pdf.
Package Designator
P6X
© 1999 Fairchild Semiconductor Corporation
NC7WZ14 • Rev. 1.0.7
Tape Section
Cavity Number
Cavity Status Cover Type Status
Leader (Start End)
125 (Typical)
Empty
Sealed
Carrier
3000
Filled
Sealed
Trailer (Hub End)
75 (Typical)
Empty
Sealed
www.fairchildsemi.com
6
NC7WZ14 — TinyLogic® UHS Dual Inverter with Schmitt Trigger Inputs
Physical Dimensions
2X
0.05 C
1.45
B
2X
(1)
0.05 C
(0.254)
(0.49)
5X
1.00
(0.75)
PIN 1 IDENTIFIER
5
(0.52)
1X
A
TOP VIEW
0.55MAX
(0.30)
6X
PIN 1
0.05 C
0.05
0.00
RECOMMENED
LAND PATTERN
0.05 C
C
0.25
0.15 6X
1.0
DETAIL A
0.10
0.05
0.45
0.35
0.10
0.00 6X
C B A
C
0.40
0.30
0.35 5X
0.25
0.40 5X
0.30
0.5
(0.05)
6X
BOTTOM VIEW
DETAIL A
PIN 1 TERMINAL
0.075 X 45
CHAMFER
(0.13)
4X
Notes:
1. CONFORMS TO JEDEC STANDARD M0-252 VARIATION UAAD
2. DIMENSIONS ARE IN MILLIMETERS
3. DRAWING CONFORMS TO ASME Y14.5M-1994
4. FILENAME AND REVISION: MAC06AREV4
5. PIN ONE IDENTIFIER IS 2X LENGTH OF ANY
OTHER LINE IN THE MARK CODE LAYOUT.
Figure 9. 6-Lead, MicroPak™, 1.0mm Wide
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the
warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/.
Tape and Reel Specification
Please visit Fairchild Semiconductor’s online packaging area for the most recent tape and reel specifications:
http://www.fairchildsemi.com/products/logic/pdf/micropak_tr.pdf.
Package Designator
L6X
© 1999 Fairchild Semiconductor Corporation
NC7WZ14 • Rev. 1.0.7
Tape Section
Cavity Number
Cavity Status Cover Type Status
Leader (Start End)
125 (Typical)
Empty
Sealed
Carrier
5000
Filled
Sealed
Trailer (Hub End)
75 (Typical)
Empty
Sealed
www.fairchildsemi.com
7
NC7WZ14 — TinyLogic® UHS Dual Inverter with Schmitt Trigger Inputs
Physical Dimensions
0.89
0.35
0.05 C
1.00
2X
B
A
5X 0.40
PIN 1
MIN 250uM
0.66
1.00
1X 0.45
6X 0.19
0.05 C
TOP VIEW
RECOMMENDED LAND PATTERN
FOR SPACE CONSTRAINED PCB
2X
0.90
0.05 C
0.35
0.55MAX
C
5X 0.52
SIDE VIEW
0.73
(0.08) 4X
1
DETAIL A
2
1X 0.57
0.09
0.19 6X
3
0.20 6X
ALTERNATIVE LAND PATTERN
FOR UNIVERSAL APPLICATION
(0.05) 6X
5X 0.35
0.25
6
5
4
0.35
0.60
(0.08)
4X
0.10
.05 C
C B A
0.40
0.30
BOTTOM VIEW
NOTES:
A. COMPLIES TO JEDEC MO-252 STANDARD
B. DIMENSIONS ARE IN MILLIMETERS.
C. DIMENSIONS AND TOLERANCES PER ASME Y14.5M, 1994
D. LANDPATTERN RECOMMENDATION IS BASED ON FSC
DESIGN.
E. DRAWING FILENAME AND REVISION: MGF06AREV3
0.075X45°
CHAMFER
DETAIL A
PIN 1 LEAD SCALE: 2X
Figure 10. 6-Lead, MicroPak2, 1x1mm Body, .35mm Pitch
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the
warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/.
Tape and Reel Specification
Please visit Fairchild Semiconductor’s online packaging area for the most recent tape and reel specifications:
http://www.fairchildsemi.com/packaging/MicroPAK2_6L_tr.pdf.
Package Designator
FHX
© 1999 Fairchild Semiconductor Corporation
NC7WZ14 • Rev. 1.0.7
Tape Section
Cavity Number
Cavity Status Cover Type Status
Leader (Start End)
125 (Typical)
Empty
Sealed
Carrier
5000
Filled
Sealed
Trailer (Hub End)
75 (Typical)
Empty
Sealed
www.fairchildsemi.com
8
NC7WZ14 — TinyLogic® UHS Dual Inverter with Schmitt Trigger Inputs
© 1999 Fairchild Semiconductor Corporation
NC7WZ14 • Rev. 1.0.7
www.fairchildsemi.com
9
Similar pages