Murata NCP03WQ334 For surface mounting application Datasheet

!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
PTC - NTC
for Surface Mounting
Application
R01E.pdf
06.1.25
!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
What is a Thermistor?
Thermally Sensitive Resistor
Characteristics of Thermistors
Resistance - Temperature Characteristics
Thermistor
Positive
Temperature
(POSISTORr)
Coefficient
2xR25
R25
BaTiO 3 + X
Ceramics
Log
R
PTC
Negative
Log
R
PTC Thermistor
Temperature
NTC Thermistor
Coefficient
Curie
Point
T
R25
Mn-Ni, Mn-Co-Cu,
Mn-Ni + X
Ceramics
NTC
25
25
T
PRF15/18 Series Chip POSISTORr for Overheat Sensing
PRF15/18 PTC Chip thermistors detect overheating of
Hybrid ICs, Power Transistors, Power Diodes and
Power ICs etc.
1. 0402 and 0603 light weight
+Vcc
R1
Thermal
Contact
RL
Example
Fan Motor
M
PRF
2. High gain simplifies circuit design
3. Free of contact noise and problems
4. Pb free plated terminations.
5. Sturdy construction resists mechanical vibration
and shock.
Power IC
Thermal
Contact
Comparator
Control IC
R2
PRF
RE
Vref
GND
PRF15 Series Characteristics
New
Part Number
Resistance
(at +25°C)
Characteristics
PRF15BA471QB1RC
BA
PRF15BB471QB1RC
BB
PRF15BC471QB1RC
BC
Sensing Temp.
(at 4.7k ohm)
Maximum
Voltage
125±5°C
470ohm ±50%
-20 to +140°C
115±5°C
32VDC
105±5°C
Dimensions
-20 to +130°C
-20 to +120°C
Electrode
Construction
Cross-sectional
0.5±0.05
Operating Temp.
PTC
Ceramic
0.1-0.4
1.0±0.05
0.5±0.05
(in mm)
Nickel Barrier
Sn Plating
R01E.pdf
06.1.25
!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
R01E.pdf
06.1.25
PRF18 Series Characteristics
Part Number
Characteristics
PRF18AS471QB1RB
AS
PRF18AR471QB1RB
PRF18BA471QB1RB
Sensing Temp. *
(at 4.7k ohm)
Resistance
(at +25°C)
Maximum
Voltage
Maximum
Current
Operating Temp.
145±5°C
-20 to +160°C
AR
135±5°C
-20 to +150°C
BA
125±5°C *
-20 to +140°C
PRF18BB471QB1RB
BB
115±5°C *
PRF18BC471QB1RB
BC
PRF18BD471QB1RB
BD
95±5°C *
PRF18BE471QB1RB
BE
85±5°C *
-20 to +100°C
PRF18BF471QB1RB
BF
75±5°C
-20 to + 90°C
PRF18BG471QB1RB
BG
65±5°C
470 ohm ±50%
105±5°C *
* Also available with tolerance ±3°C
30mA
-20 to +120°C
-20 to +110°C
-20 to + 80°C
Rating (0603) - Lead Free Terminations Type and UL1434 (except BF, BG types)
New
Part Number
-20 to +130°C
32VDC
Characteristics
PRF18BA473QB1RB
BA
Resistance
(at +25°C)
Sensing Temp.
(at 4.7k ohm)
Maximum
Voltage
Operating Temp.
470k ohm ±50%
130±5°C
32VDC
-20 to +140°C
Low Current Consumption!
Dimensions
Electrode
Construction
Cross-sectional
0.8±0.15
PTC
Ceramic
0.1-0.6
0.8±0.15
1.6±0.15
(in mm)
Nickel Barrier
Sn Plating
Circuit Examples
The POSISTORr has the
following advantages over
Bimetal devices.
POSISTORr
Bimetal
1. Noise free
PRF
2. No contact problems
3. Low price
POSISTORr
Zener Diode
The POSISTORr has the
following additional advantages
over Zener Diodes.
PRF
+
1. Reduced numbers of parts
used in circuits
Mounting Area
Parts
Zener Diode
10x10 = 100mm2
UPS
Parts
1
Diode
2
Transistor
7
Resistor
1
Op. Amp.
Total
11
POSISTORr
6x6 = 36mm2
UPS
Parts
1
POSISTORr
1
Transistor
2
Resistor
0
Op. Amp.
Total
4
2. Reduced process costs of
mounting parts on PCBs
3. Reduces occupied space,
helping high density PCB
mounting
!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
R01E.pdf
06.1.25
Markets & Applications of Overheat Sensing
<Set PTC Used>
PRF
PC Server
TV Game
<Competitive Device>
Overheat Sensing of FET
Temperature Fuse
Overheat Sensing of Power Supply
---
LCD
Overheat Sensing for Inverter Module of Backlight
---
AC Adapter
Overheat Sensing of FET
---
Overheat Sensing of Case
---
Power Supply
DC-DC Converter
Video Camera
<Function of PRF>
Overheat Sensing of FET
AC Adapter
Overheat Sensing of FET
Temperature Fuse
AC Adapter
Overheat Sensing of PCB
---
Lighting
Dimmer
Overheat Sensing of Power Tr
Temperature Fuse
Power Supply
DC-DC Converter
Overheat Sensing of FET
---
Car Audio
AMP
Overheat Sensing of Power Hybrid IC
---
Overheat Sensing of Case
NTC Thermistor
LCD
Overheat Sensing for Inverter of Backlight
AMP
Overheat Sensing of Power Hybrid IC
---
Overheat Sensing of Power Hybrid IC
---
DC Brushless Motor
Current Limitation & Overheat Sensing of Driver IC
---
Refrigerator
DC Brushless Motor
Overheat Sensing of Driver IC
---
PPC/Printer
DC Brushless Motor
Overheat Sensing of Driver IC
Copy Machine
Lamp
Overheat Sensing of Lamp Starter Circuit
Audio
Air Conditioner
---
PRG18/21 Series Chip POSISTORr for Overcurrent Prevention
Chip THERMISTORS prevent failure of apparatus due
to excess current.
1. 0603 and 0805 light weight
2. High gain simplifies circuit design
3. Free of contact noise and problems
4. Pb free plated terminations.
5. Sturdy construction resists mechanical
vibration and shock.
Load
PTC
PTC
PRG Series Characteristics
Ratings - Lead Free Terminations
Resistance
(at +25°C)
Maximum
Voltage
Maximum
Current
Non-operating
Current (at +60°C)
Operating
Current (at -10°C)
PRG21BC0R2MM1RA
0.20 ohm ±20%
6VDC
10A
500mA
2000mA
PRG21BC4R7MM1RA
4.7 ohm ±20%
5A
100mA
400mA
PRG21BC6R8MM1RA
6.8 ohm ±20%
3.5A
80mA
320mA
PRG21BB150MB1RK
15 ohm ±20%
1.6A
40mA
140mA
PRG21BB220MB1RK
22 ohm ±20%
1.1A
30mA
110mA
PRG18BB330MB1RB
33 ohm ±20%
350mA
25mA
85mA
PRG18BB470MB1RB
47 ohm ±20%
300mA
20mA
75mA
PRG18BB101MB1RB
100 ohm ±20%
200mA
15mA
55mA
PRG18BB221MB1RB
220 ohm ±20%
90mA
10mA
35mA
PRG18BB471MB1RB
470 ohm ±20%
40mA
7mA
25mA
New
Part Number
20VDC
20VDC
24VDC
!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Dimensions
L
W
T
e
b
L
PRG18BB
1.6±0.15
PRG21BB
2.0±0.2
0.8±0.15
1.25±0.2
0.1-0.6
-
0.2 min.
0.5 min.
PRG21BC
2.0±0.2
1.25±0.2
0.9±0.2
0.2 min.
0.5 min.
W
e
b
e
T
(in mm)
Electrode Construction Cross-sectional
Multilayer Chip POSISTORr for Overcurrent Protection
PTC
Ceramic
Nickel Barrier
PRG21BC Type
Sn Plating
Data here are reference only. Specifications available upon request. Product to be evaluated, confirmed by the user before actual use.
Description here may be revised without notice.
POSISTORr Ideas
From Fuse Resistor
From Current Control Circuit
Fuse Resistor
IN
OUT
PRG
IN
PRG
OUT
IN
OUT
IN
OUT
FET
FET
Limitting
Circuit
Limitting
Circuit
Simple
Auto-reset
Item
POSISTORr
Fuse Resistor
Control Circuit
From Chip Resistor
Safety
PRG
IN
OUT IN
FET
Control
Circuit
OUT
FET
Control
Circuit
Down Sizing &
Overcurrent Protecting
Repeat
Space
Cost
Key: Cross = Bad - Circle = Good - Triangle = Little difference
Chip Resistor
R01E.pdf
06.1.25
!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
R01E.pdf
06.1.25
Markets & Applications for Overcurrent Protection
<Product / Use>
PRG
Note PC
PDA
<POSISTORr Function>
Rechargeable
Battery
<Competitive Devices>
Current Limitation & Overcurrent
Protection for Trickle Charging Circuit
Chip Resistor
Current Limitation & Overcurrent
Protection for Control IC
Fuse Resistor
Chip Resistor
Mother Board
et Al.
Short-circuit Protection
for Signal Line
---
LCD
Short-circuit Protection
for LCD Drive Module
TV Game
DC-DC Converter
Overcurrent Protection
Circuit Using Tr
Power Supply
DC-DC Converter
Overcurrent Protection
for Output Circuit
Circuit Using Tr
Car Audio
Signal Line
Overcurrent Protection
Leaded PTC
Undefined
Optical Sensor
Short-circuit Protection
for Optical Sensor Driver
---
Chip NTC Thermistor NCP series
1. A common relationship between Resistance and
B constant in all sizes (0201/ 0402/ 0603/ 0805)
offers convenience when downsizing.
2. No lead contained (Pb free).
3. Tight resistance tolerance of ±1% (Code F)
available on 10k ohm (0402, 0603), 47k ohm (0603)
and 100k ohm (0603) products.
4. High soldering heat resistant
5. High humidity resistant due to unique inner
electrodes.
Structure NCP Plated Terminations
NTC
Ceramic
Silver Alloy
Nickel Plating
Dimensions
L
W
W
e
L
e
T
T
(in mm)
e
Tin Plating
NCP03
(0201 size)
NCP15
(0402 size)
NCP18
(0603 size)
NCP21
(0805 size)
0.60±0.03
1.00±0.05
1.60±0.15
2.00±0.20
0.3±0.03
0.50±0.05
0.80±0.15
0.10-0.20
0.15-0.35
0.20-0.60
1.25±0.20
0.85±0.15
0.20-0.70
!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Line-up of Plated Termination
0402 NCP15
0201 NCP03
Resistance
at 25°C
B-Constant
Part Number
B-Constant
Part Number
B-Constant
Part Number
B-Constant
Part Number
11 ohm
2750 K
NCP03YS110*
-
-
-
-
-
-
22 ohm
2750 K
NCP03YS220*
-
-
3100 K
NCP15XC220*
-
-
33 ohm
2750 K
NCP03YS330*
-
-
3100 K
NCP15XC330*
-
-
47 ohm
2750 K
NCP03YS470*
-
-
3100 K
NCP15XC470*
-
-
68 ohm
2750 K
NCP03YS680*
-
-
3100 K
NCP15XC680*
-
-
100 ohm
2750 K
NCP03YS101*
-
-
3250 K
NCP15XF101*
-
-
150 ohm
( 3100 K
NCP03XC151*
-
-
3250 K
NCP15XF151*
-
-
220 ohm
( 3100 K
NCP03XC221*
-
-
3500 K
NCP15XM221*
-
-
330 ohm
( 3100 K
NCP03XC331*
-
-
3500 K
NCP15XM331*
-
-
470 ohm
( 3100 K
NCP03XC471*
-
-
3650 K
NCP15XQ471*
-
-
680 ohm
( 3100 K
NCP03XC681*
-
-
3650 K
NCP15XQ681*
-
-
1.0k ohm
( 3500 K
NCP03XM102*
-
-
3650 K
NCP15XQ102*
-
-
1.5k ohm
( 3500 K
NCP03XM152*
-
-
3950 K
NCP15XW152*
-
-
NCP15XW222*
-
-
2.2k ohm
( 3500 K
NCP03XM222*
-
-
3950 K
3.3k ohm
( 3500 K
NCP03XM332*
-
-
3950 K
NCP15XW332*
-
-
4.7k ohm
( 3500 K
NCP03XM472*
-
-
3500 K
NCP15XM472*
-
-
6.8k ohm
3380 K
NCP03XH682*
-
-
3950 K
NCP15XW682*
-
-
10k ohm
3380 K
NCP03XH103*
-
-
3380 K
NCP15XH103*
3900 K
NCP15XV103*
15k ohm
3380 K
NCP03XH153*
-
-
3950 K
NCP15XW153*
-
-
22k ohm
3380 K
NCP03XH223*
-
-
3950 K
NCP15XW223*
4485 K
NCP15WL223*
33k ohm
4250 K
NCP03WF333*
-
-
4050 K
NCP15WB333*
4485 K
NCP15WL333*
47k ohm
4050 K
NCP03WB473*
4485 K
NCP03WL473*
4050 K
NCP15WB473*
4485 K
NCP15WL473*
68k ohm
4250 K
NCP03WF683*
4485 K
NCP03WL683*
4150 K
NCP15WD683*
4485 K
NCP15WL683*
100k ohm
4250 K
NCP03WF104*
4485 K
NCP03WL104*
4250 K
NCP15WF104*
4485 K
NCP15WL104*
150k ohm
-
-
4485 K
NCP03WL154*
4500 K
NCP15WM154*
4485 K
NCP15WL154*
220k ohm
-
-
4485 K
NCP03WL224*
4500 K
NCP15WM224*
-
-
330k ohm
( 4750 K
NCP03WQ334*
-
-
-
-
-
-
470k ohm
( 4750 K
NCP03WQ474*
-
-
4500 K
NCP15WM474*
-
-
680k ohm
( 4750 K
NCP03WQ684*
-
-
-
-
-
-
-
-
-
-
1.0M ohm
( 4750 K
-
NCP03WQ105*
-
Operating
Temp.
-40 to +125°C
-40 to +125°C
Dissipation
Constant
Approx. 1.0 mW/°C
Approx. 1.0 mW/°C
P/N in End
05RL
03RC
Packaging
15 kpcs./reel
10 kpcs./reel
Certified
UL1434
-
Done
-
Recommended types
Coming soon!
* Resistance tolerance codes: F=±1%, E=±3%, J=±5%, K=±10%
10k ohm, 47k ohm, 100k ohm type have Tight Tolerance Type (±1%: NCP18XH103F03RB, NCP15XH103F03RC, NCP18WB473F10RB, NCP15WB473F03RC,
NCP18WF104F12RB, NCP15WF104F03RC)
R01E.pdf
06.1.25
!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
0805 NCP21
0603 NCP18
Resistance
at 25°C
B-Constant
Part Number
B-Constant
Part Number
B-Constant
Part Number
11 ohm
-
-
-
-
-
-
22 ohm
-
-
-
-
-
-
33 ohm
-
-
-
-
-
-
47 ohm
-
-
-
-
-
-
68 ohm
-
-
-
-
-
-
100 ohm
3250 K
NCP18XF101*
-
-
-
-
150 ohm
3250 K
NCP18XF151*
-
-
-
-
220 ohm
3500 K
NCP18XM221*
-
-
3500 K
NCP21XM221*
330 ohm
3500 K
NCP18XM331*
-
-
-
-
470 ohm
3650 K
NCP18XQ471*
-
-
3650 K
NCP21XQ471*
680 ohm
3650 K
NCP18XQ681*
-
-
-
-
1.0k ohm
3650 K
NCP18XQ102*
-
-
3650 K
NCP21XQ102*
1.5k ohm
3950 K
NCP18XW152*
-
-
-
-
3950 K
NCP21XW222*
2.2k ohm
3950 K
NCP18XW222*
-
-
3.3k ohm
3950 K
NCP18XW332*
-
-
-
-
4.7k ohm
3500 K
NCP18XM472*
-
-
3500 K
NCP21XM472*
6.8k ohm
3950 K
NCP18XW682*
-
-
-
-
10k ohm
3380 K
NCP18XH103*
3900 K
NCP18XV103*
3900 K
NCP21XV103*
15k ohm
3950 K
NCP18XW153*
-
-
3950 K
NCP21XW153*
22k ohm
3950 K
NCP18XW223*
-
-
3950 K
NCP21XW223*
33k ohm
4050 K
NCP18WB333*
-
-
4050 K
NCP21WB333*
47k ohm
4050 K
NCP18WB473*
-
-
4050 K
NCP21WB473*
68k ohm
4150 K
NCP18WD683*
-
-
-
-
100k ohm
4250 K
NCP18WF104*
-
-
4250 K
NCP21WF104*
150k ohm
4500 K
NCP18WM154*
-
-
-
-
220k ohm
4500 K
NCP18WM224*
-
-
-
-
330k ohm
-
-
-
-
-
-
470k ohm
4500 K
NCP18WM474*
-
-
-
-
680k ohm
-
-
-
-
-
-
1.0M ohm
-
-
-
-
-
-
Operating
Temp.
-40 to +125°C
-40 to +125°C
Dissipation
Constant
Approx. 1.0 mW/°C
Approx. 2.0 mW/°C
P/N in End
03RB
03RA
Packaging
4 kpcs./reel
4 kpcs./reel
Certified
UL1434
Done
Done
Recommended types
Coming soon!
* Resistance tolerance codes: F=±1%, E=±3%, J=±5%, K=±10%
10k ohm, 47k ohm, 100k ohm type have Tight Tolerance Type (±1%: NCP18XH103F03RB, NCP15XH103F03RC, NCP18WB473F10RB, NCP15WB473F03RC,
NCP18WF104F12RB, NCP15WF104F03RC)
R01E.pdf
06.1.25
!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Popular Applications of Chip NTC
LCD
Power Amplifier
to Antenna
Ground
R
R
LCD
Controller
PA
Module
NTC
Drive voltage is
compensated utilizing
NTC’s temperature
signal.
High resistance values
generally required,
typically
33k ohms to
470k ohms
V ref
R
Temperature
compensation of
power amplifier (PA)
module.
LCD Contrast control.
R
NTC
Vcc
AGC
Amp.
Thermal
Connection
ROM
Battery Pack (Li-Ion / Ni MH)
Li-lon
Ambient temperature
detection of charging time.
Detection of battery cell
heating in abnormal
circumstances.
Ni MH
FET
IC
PTC
FET
Thermal
Connection
Thermal
Connection
47k ohm±5%
10k ohm±5%
10k ohm±1% …etc.
NTC
NTC
More Popular Applications of Chip NTCs
Personal Computer
HDD
Mini Disk Player
Portable CD
Player
LCD TV
PDA
Pager
Digital
Camera
VCR Camera
NCP03
(0201
size)
A lead of
mechanical
pencil
(0.5mm dia.)
NCP15
(0402
size)
NCP18
(0603
size)
NCP21
(0805
size)
Mobile Phone
Headphone Stereo
Printer
Cassette & Tuner
CD Auto Changer
Rechargeable Battery
R01E.pdf
06.1.25
!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
R01E.pdf
06.1.25
Note:
1. Export Control
For customers outside Japan
No muRata products should be used or sold, through any channels, for use in the design, development, production, utilization, maintenance or operation of, or
otherwise contribution to (1) any weapons (Weapons of Mass Destruction (nuclear, chemical or biological weapons or missiles) or conventional weapons) or (2)
goods or systems specially designed or intended for military end-use or utilization by military end-users.
For customers in Japan
For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specified by the law is required
for export.
2. Please contact our sales representatives or product engineers before using the products in this catalog for the applications listed below, which require especially
high reliability for the prevention of defects which might directly damage a third party's life, body or property, or when one of our products is intended for use in
applications other than those specified in this catalog.
q Aircraft equipment
w Aerospace equipment
e Undersea equipment
r Power plant equipment
t Medical equipment
y Transportation equipment (vehicles, trains, ships, etc.)
u Traffic signal equipment
i Disaster prevention / crime prevention equipment
o Data-processing equipment
!0 Application of similar complexity and/or reliability requirements to the applications listed above
3. Product specifications in this catalog are as of January 2006. They are subject to change or our products in it may be discontinued without advance notice.
Please check with our sales representatives or product engineers before ordering. If there are any questions, please contact our sales representatives or
product engineers.
4. This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or
transact the approval sheet for product specifications before ordering. Especially, please read rating and
CAUTION (for storage, operating, rating, soldering,
mounting and handling) in them to prevent smoking and/or burning, etc.
5. You are able to read a detailed specification in the website of Search Engine (http://search.murata.co.jp/) or catalog library (http://www.murata.com/catalog/)
before to require our product specification or to transact the approval sheet for product specification.
6. Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect
of our and/or a third party's intellectual property rights and other related rights in consideration of your use of our products and/or information described or
contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned
above under licenses without our consent.
7. No ozone depleting substances (ODS) under the Montreal Protocol are used in our manufacturing process.
<
<
>
>
http://www.murata.com/
Head Office
1-10-1, Higashi Kotari, Nagaokakyo-shi, Kyoto 617-8555, Japan
Phone: 81-75-951-9111
Cat. No. R01E
International Division
3-29-12, Shibuya, Shibuya-ku, Tokyo 150-0002, Japan
Phone: 81-3-5469-6123 Fax: 81-3-5469-6155 E-mail: [email protected]
Similar pages