ON NCP303LSN33T1 Voltage detector series with programmable delay Datasheet

NCP302, NCP303
Voltage Detector Series
with Programmable Delay
The NCP302 and NCP303 series are second generation ultra−low
current voltage detectors that contain a programmable time delay
generator. These devices are specifically designed for use as reset
controllers in portable microprocessor based systems where extended
battery life is paramount.
Each series features a highly accurate undervoltage detector with
hysteresis and an externally programmable time delay generator. This
combination of features prevents erratic system reset operation.
The NCP302 series consists of complementary output devices that
are available with either an active high or active low reset. The
NCP303 series has an open drain N−Channel output with an active low
reset output.
http://onsemi.com
5
1
THIN SOT23−5/TSOP−5/SC59−5
CASE 483
Features
PIN CONNECTIONS AND
MARKING DIAGRAM
Quiescent Current of 0.5 A Typical
High Accuracy Undervoltage Threshold of 2.0%
Externally Programmable Time Delay Generator
Wide Operating Voltage Range of 0.8 V to 10 V
Complementary or Open Drain Output
Active Low or Active High Reset
Pb−Free Packages are Available
Reset
Output
1
Input
2
Ground
3
xxx =Specific Device Code
Y
= Year
W = Work Week
Microprocessor Reset Controller
Low Battery Detection
Power Fail Indicator
Battery Backup Detection
ORDERING INFORMATION
See detailed ordering and shipping information in the ordering
information section on page 22 of this data sheet.
NCP303LSNxxT1
Open Drain Output Configuration
NCP302xSNxxT1
Complementary Output Configuration
2
2
Input
RD
*
3
GND 5
Input
1
Reset Output
RD
1
Vref
4 N.C.
(Top View)
Typical Applications
•
•
•
•
5 CD
xxxYW
•
•
•
•
•
•
•
Reset
Output
Vref
3
CD
GND 5
CD
* Inverter for active low devices.
* Buffer for active high devices.
This device contains 28 active transistors.
Figure 1. Representative Block Diagrams
 Semiconductor Components Industries, LLC, 2005
January, 2005 − Rev. 14.5
1
Publication Order Number:
NCP302/D
NCP302, NCP303
MAXIMUM RATINGS
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁ
ÁÁÁÁ
Symbol
Value
Unit
Input Power Supply Voltage (Pin 2)
Rating
Vin
12
V
Delay Capacitor Pin Voltage (Pin 5)
VCD
−0.3 to Vin + 0.3
V
Output Voltage (Pin 1)
Complementary, NCP302
N−Channel Open Drain, NCP303
VOUT
V
−0.3 to Vin + 0.3
−0.3 to 12
Output Current (Pin 1) (Note 2)
IOUT
70
mA
Thermal Resistance Junction−to−Air
RJA
250
°C/W
Maximum Junction Temperature
TJ
+125
°C
Operating Ambient Temperature Range
TA
−40 to +85
°C
Storage Temperature Range
Tstg
−55 to +150
°C
Moisture Sensitivity Level (TA = 235°C)
MSL
1
Latchup Performance
Positive
Negative
ILATCHUP
mA
200
200
Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit
values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied,
damage may occur and reliability may be affected.
1. This device series contains ESD protection and exceeds the following tests:
Human Body Model 2000 V per MIL−STD−883, Method 3015.
Machine Model Method 200 V.
2. The maximum package power dissipation limit must not be exceeded.
P
D
T
T
J(max)
A
R
JA
http://onsemi.com
2
NCP302, NCP303
ELECTRICAL CHARACTERISTICS (For all values TA = 25°C, unless otherwise noted.)
Characteristic
Symbol
Min
Typ
Max
Unit
Detector Threshold (Pin 2, Vin Decreasing)
VDET−
0.882
0.900
0.918
V
Detector Threshold Hysteresis (Pin 2, Vin Increasing)
VHYS
0.027
0.045
0.063
V
−
−
0.20
0.45
0.6
1.2
−
−
10
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
NCP302/3 − 0.9
Supply Current (Pin 2)
(Vin = 0.8 V)
(Vin = 2.9 V)
A
Iin
Maximum Operating Voltage (Pin 2)
Vin(max)
V
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
Minimum Operating Voltage (Pin 2)
(TA = −40°C to 85°C)
Vin(min)
Reset Output Current (Pin 1, Active Low ‘L’ Suffix Devices)
−
−
0.55
0.65
0.70
0.80
IOUT
Nch Sink Current, NCP302, NCP303
(VOUT = 0.05V, Vin = 0.70V)
(VOUT = 0.50V, Vin = 0.85V)
V
mA
0.01
0.05
0.05
0.50
−
−
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
Pch Source Current, NCP302
(VOUT = 2.4V, Vin = 4.5V)
1.0
Reset Output Current (Pin 1, Active High ‘H’ Suffix Devices)
6.0
−
IOUT
mA
Nch Sink Current, NCP302, NCP303
(VOUT = 0.5 V, Vin = 1.5 V)
1.05
2.5
−
Pch Source Current, NCP302
(VOUT = 0.4 V, Vin = 0.7 V)
(VOUT = GND, Vin = 0.8 V)
0.011
0.014
0.04
0.08
−
−
CD Delay Pin Threshold Voltage (Pin 5)
(Vin = 0.99 V)
VTCD
Delay Capacitor Pin Sink Current (Pin 5)
(Vin = 0.7 V, VCD = 0.1V)
(Vin = 0.85 V, VCD = 0.5V)
ICD
Delay Pullup Resistance (Pin 5)
V
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
0.50
0.67
0.84
2.0
10
120
300
−
−
RD
0.5
1.0
2.0
M
Detector Threshold (Pin 2, Vin Decreasing)
VDET−
1.764
1.80
1.836
V
Detector Threshold Hysteresis (Pin 2, Vin Increasing)
VHYS
0.054
0.090
0.126
V
−
−
0.23
0.48
0.7
1.3
A
NCP302/3 − 1.8
Supply Current (Pin 2)
(Vin = 1.7 V)
(Vin = 3.8 V)
A
Iin
Maximum Operating Voltage (Pin 2)
Vin(max)
−
−
10
V
Minimum Operating Voltage (Pin 2)
(TA = −40°C to 85°C)
Vin(min)
−
−
0.55
0.65
0.70
0.80
V
Reset Output Current (Pin 1, Active Low ‘L’ Suffix Devices)
IOUT
Nch Sink Current, NCP302, NCP303
(VOUT = 0.05V, Vin = 0.70V)
(VOUT = 0.50V, Vin = 1.5V)
mA
0.01
1.0
0.05
2.0
−
−
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
Pch Source Current, NCP302
(VOUT = 2.4V, Vin = 4.5V)
1.0
Reset Output Current (Pin 1, Active High ‘H’ Suffix Devices)
6.0
−
IOUT
Nch Sink Current, NCP302, NCP303
(VOUT = 0.5 V, Vin = 5.0 V)
Pch Source Current, NCP302
(VOUT = 0.4 V, Vin = 0.7 V)
(VOUT = GND, Vin = 1.5 V)
http://onsemi.com
3
mA
6.3
11
−
0.011
0.525
0.04
0.6
−
−
NCP302, NCP303
ELECTRICAL CHARACTERISTICS (continued) (For all values TA = 25°C, unless otherwise noted.)
Characteristic
Symbol
Min
Typ
Max
Unit
NCP302/3 − 1.8
CD Delay Pin Threshold Voltage (Pin 5)
(Vin = 1.98 V)
VTCD
Delay Capacitor Pin Sink Current (Pin 5)
(Vin = 0.7 V, VCD = 0.1V)
(Vin = 1.5 V, VCD = 0.5V)
ICD
Delay Pullup Resistance (Pin 5)
V
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
0.99
1.34
1.68
2.0
200
120
1600
−
−
RD
0.5
1.0
2.0
M
Detector Threshold (Pin 2, Vin Decreasing)
VDET−
1.960
2.00
2.040
V
Detector Threshold Hysteresis (Pin 2, Vin Increasing)
VHYS
0.06
0.10
0.14
V
−
−
0.23
0.48
0.8
1.3
A
NCP302/3 − 2.0
Supply Current (Pin 2)
(Vin = 1.9 V)
(Vin = 4.0 V)
A
Iin
Maximum Operating Voltage (Pin 2)
Vin(max)
−
−
10
V
Minimum Operating Voltage (Pin 2)
(TA = −40°C to 85°C)
Vin(min)
−
−
0.55
0.65
0.70
0.80
V
Reset Output Current (Pin 1, Active Low ‘L’ Suffix Devices)
IOUT
Nch Sink Current, NCP302, NCP303
(VOUT = 0.05V, Vin = 0.70V)
(VOUT = 0.50V, Vin = 1.5V)
mA
0.01
1.0
0.05
2.0
−
−
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
Pch Source Current, NCP302
(VOUT = 2.4V, Vin = 4.5V)
1.0
Reset Output Current (Pin 1, Active High ‘H’ Suffix Devices)
6.0
−
IOUT
Nch Sink Current, NCP302, NCP303
(VOUT = 0.5 V, Vin = 5.0 V)
Pch Source Current, NCP302
(VOUT = 0.4 V, Vin = 0.7 V)
(VOUT = GND, Vin = 1.5 V)
CD Delay Pin Threshold Voltage (Pin 5)
(Vin = 2.2 V)
VTCD
Delay Capacitor Pin Sink Current (Pin 5)
(Vin = 0.7 V, VCD = 0.1V)
(Vin = 1.5 V, VCD = 0.5V)
ICD
Delay Pullup Resistance (Pin 5)
mA
6.3
11
−
0.011
0.525
0.04
0.6
−
−
V
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
1.10
1.49
1.87
2.0
200
120
1600
−
−
RD
0.5
1.0
2.0
M
Detector Threshold (Pin 2, Vin Decreasing)
VDET−
2.646
2.700
2.754
V
Detector Threshold Hysteresis (Pin 2, Vin Increasing)
VHYS
0.081
0.135
0.189
V
−
−
0.26
0.46
0.8
1.3
A
NCP302/3− 2.7
Supply Current (Pin 2)
(Vin = 2.6 V)
(Vin = 4.7 V)
A
Iin
Maximum Operating Voltage (Pin 2)
Vin(max)
−
−
10
V
Minimum Operating Voltage (Pin 2)
(TA = −40°C to 85°C)
Vin(min)
−
−
0.55
0.65
0.70
0.80
V
Reset Output Current (Pin 1, Active Low ‘L’ Suffix Devices)
IOUT
mA
Nch Sink Current, NCP302, NCP303
(VOUT = 0.05V, Vin = 0.70V)
(VOUT = 0.50V, Vin = 1.5V)
0.01
1.0
0.05
2.0
−
−
Pch Source Current, NCP302
(VOUT = 2.4V, Vin = 4.5V)
1.0
6.0
−
http://onsemi.com
4
NCP302, NCP303
ELECTRICAL CHARACTERISTICS (continued) (For all values TA = 25°C, unless otherwise noted.)
Characteristic
Symbol
Min
Typ
Max
Unit
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
NCP302/3− 2.7
Reset Output Current (Pin 1, Active High ‘H’ Suffix Devices)
IOUT
Nch Sink Current, NCP302, NCP303
(VOUT = 0.5 V, Vin = 5.0 V)
Pch Source Current, NCP302
(VOUT = 0.4 V, Vin = 0.7 V)
(VOUT = GND, Vin = 1.5 V)
CD Delay Pin Threshold Voltage (Pin 5)
(Vin = 2.97 V)
VTCD
Delay Capacitor Pin Sink Current (Pin 5)
(Vin = 0.7 V, VCD = 0.1V)
(Vin = 1.5 V, VCD = 0.5V)
ICD
Delay Pullup Resistance (Pin 5)
mA
6.3
11
−
0.011
0.525
0.04
0.6
−
−
V
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
1.49
2.01
2.53
2.0
200
120
1600
−
−
RD
0.5
1.0
2.0
M
Detector Threshold (Pin 2, Vin Decreasing)
VDET−
2.94
3.00
3.06
V
Detector Threshold Hysteresis (Pin 2, Vin Increasing)
VHYS
0.09
0.15
0.21
V
−
−
0.27
0.47
0.9
1.3
A
NCP302/3 − 3.0
Supply Current (Pin 2)
(Vin = 2.87 V)
(Vin = 5.0 V)
A
Iin
Maximum Operating Voltage (Pin 2)
Vin(max)
−
−
10
V
Minimum Operating Voltage (Pin 2)
(TA = −40°C to 85°C)
Vin(min)
−
−
0.55
0.65
0.70
0.80
V
Reset Output Current (Pin 1, Active Low ‘L’ Suffix Devices)
IOUT
Nch Sink Current, NCP302, NCP303
(VOUT = 0.05V, Vin = 0.70V)
(VOUT = 0.50V, Vin = 1.5V)
mA
0.01
1.0
0.05
2.0
−
−
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
Pch Source Current, NCP302
(VOUT = 2.4V, Vin = 4.5V)
1.0
Reset Output Current (Pin 1, Active High ‘H’ Suffix Devices)
6.0
−
IOUT
Nch Sink Current, NCP302, NCP303
(VOUT = 0.5 V, Vin = 5.0 V)
Pch Source Current, NCP302
(VOUT = 0.4 V, Vin = 0.7 V)
(VOUT = GND, Vin = 1.5 V)
CD Delay Pin Threshold Voltage (Pin 5)
(Vin = 3.3 V)
VTCD
Delay Capacitor Pin Sink Current (Pin 5)
(Vin = 0.7 V, VCD = 0.1V)
(Vin = 1.5 V, VCD = 0.5V)
ICD
Delay Pullup Resistance (Pin 5)
mA
6.3
11
−
0.011
0.525
0.04
0.6
−
−
V
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
1.65
2.23
2.81
2.0
200
120
1600
−
−
RD
0.5
1.0
2.0
M
Detector Threshold (Pin 2, Vin Decreasing)
VDET−
4.410
4.500
4.590
V
Detector Threshold Hysteresis (Pin 2, Vin Increasing)
VHYS
0.135
0.225
0.315
A
NCP302/3 − 4.5
Supply Current (Pin 2)
(Vin = 4.34 V)
(Vin = 6.5 V)
V
A
Iin
−
−
0.33
0.52
1.0
1.4
Maximum Operating Voltage (Pin 2)
Vin(max)
−
−
10
V
Minimum Operating Voltage (Pin 2)
(TA = −40°C to 85°C)
Vin(min)
−
−
0.55
0.65
0.70
0.80
V
http://onsemi.com
5
NCP302, NCP303
ELECTRICAL CHARACTERISTICS (continued) (For all values TA = 25°C, unless otherwise noted.)
Characteristic
Symbol
Min
Typ
Max
Unit
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
NCP302/3 − 4.5
Reset Output Current (Pin 1, Active Low ‘L’ Suffix Devices)
IOUT
Nch Sink Current, NCP302, NCP303
(VOUT = 0.05V, Vin = 0.70V)
(VOUT = 0.50V, Vin = 1.5V)
mA
0.01
1.0
0.05
2.0
−
−
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
Pch Source Current, NCP302
(VOUT = 5.9V, Vin = 8.0V)
1.5
Reset Output Current (Pin 1, Active High ‘H’ Suffix Devices)
10.5
−
IOUT
Nch Sink Current, NCP302, NCP303
(VOUT = 0.5 V, Vin = 5.0 V)
Pch Source Current, NCP302
(VOUT = 0.4 V, Vin = 0.7 V)
(VOUT = GND, Vin = 1.5 V)
CD Delay Pin Threshold Voltage (Pin 5)
(Vin = 4.95 V)
VTCD
Delay Capacitor Pin Sink Current (Pin 5)
(Vin = 0.7 V, VCD = 0.1V)
(Vin = 1.5 V, VCD = 0.5V)
ICD
Delay Pullup Resistance (Pin 5)
mA
6.3
11
−
0.011
0.525
0.04
0.6
−
−
V
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
2.25
3.04
3.83
2.0
200
120
1600
−
−
RD
0.5
1.0
2.0
M
Detector Threshold (Pin 2, Vin Decreasing)
VDET−
4.606
4.70
4.794
V
Detector Threshold Hysteresis (Pin 2, Vin Increasing)
VHYS
0.141
0.235
0.329
V
−
−
0.34
0.53
1.0
1.4
A
NCP302/3 − 4.7
Supply Current (Pin 2)
(Vin = 4.54 V)
(Vin = 6.7 V)
A
Iin
Maximum Operating Voltage (Pin 2)
Vin(max)
−
−
10
V
Minimum Operating Voltage (Pin 2)
(TA = −40°C to 85°C)
Vin(min)
−
−
0.55
0.65
0.70
0.80
V
Reset Output Current (Pin 1, Active Low ‘L’ Suffix Devices)
IOUT
Nch Sink Current, NCP302, NCP303
(VOUT = 0.05V, Vin = 0.70V)
(VOUT = 0.50V, Vin = 1.5V)
mA
0.01
1.0
0.05
2.0
−
−
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
Pch Source Current, NCP302
(VOUT = 5.9V, Vin = 8.0V)
1.5
Reset Output Current (Pin 1, Active High ‘H’ Suffix Devices)
10.5
−
IOUT
Nch Sink Current, NCP302, NCP303
(VOUT = 0.5 V, Vin = 5.0 V)
Pch Source Current, NCP302
(VOUT = 0.4 V, Vin = 0.7 V)
(VOUT = GND, Vin = 1.5 V)
CD Delay Pin Threshold Voltage (Pin 5)
(Vin = 5.17 V)
VTCD
Delay Capacitor Pin Sink Current (Pin 5)
(Vin = 0.7 V, VCD = 0.1V)
(Vin = 1.5 V, VCD = 0.5V)
ICD
Delay Pullup Resistance (Pin 5)
RD
mA
6.3
11
−
0.011
0.525
0.04
0.6
−
−
V
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁ
http://onsemi.com
6
2.59
3.49
4.40
2.0
200
120
1600
−
−
0.5
1.0
2.0
A
M
NCP302, NCP303
NCP302L
NCP303L
VDET+ + 2.0 V
VDET+ + 2.0 V
0.7 V
0.7 V
GND
GND
Input Voltage,
Pin 2
Reset Output
Voltage, Pin 1
VDET+ + 2.0 V
5.0 V
VDET+ + 2.0 V
2
2.5 V
GND
GND
tD1
tD2
tD1
tD2
NCP302 and NCP303 series are measured with a 10 pF capacitive load. NCP303 has an additional 470 k pullup resistor
connected from the reset output to +5.0 V. The reset output voltage waveforms are shown for the active low ‘L’ devices. Output
time delay tD1 and tD2 are dependent upon the delay capacitance. Refer to Figures 12, 13, and 14. The upper detector
threshold, VDET+ is the sum of the lower detector threshold, VDET− plus the input hysteresis, VHYS.
Figure 2. Measurement Conditions for tD1 and tD2
http://onsemi.com
7
NCP302, NCP303
Table 1. ELECTRICAL CHARACTERISTIC TABLE FOR 0.9 − 4.9 V
Detector Threshold
Hysteresis
Vin Low
Vin High
Vin Low
Vin High
Pch
Source
So
rce
Current
VHYS (V)
Iin
(A) (1)
Iin
(A) (2)
IOUT
(mA) (3)
IOUT
(mA) (4)
IOUT
(mA) (5)
Supply Current
NCP302 Series
Detector Threshold
VDET− (V)
Part Number
Nch Sink Current
Min
Typ
Max
Min
Typ
Max
Typ
Typ
Typ
Typ
Typ
NCP302LSN09T1
0.882
0.9
0.918
0.027
0.045
0.063
0.3
0.5
0.05
0.5
2.0
NCP302LSN10T1
0.980
1.0
1.020
0.030
0.050
0.070
NCP302LSN11T1
1.078
1.1
1.122
0.033
0.055
0.077
NCP302LSN12T1
1.176
1.2
1.224
0.036
0.060
0.084
NCP302LSN13T1
1.274
1.3
1.326
0.039
0.065
0.091
NCP302LSN14T1
1.372
1.4
1.428
0.042
0.070
0.098
NCP302LSN15T1
1.470
1.5
1.530
0.045
0.075
0.105
NCP302LSN16T1
1.568
1.6
1.632
0.048
0.080
0.112
NCP302LSN17T1
1.666
1.7
1.734
0.051
0.085
0.119
NCP302LSN18T1
1.764
1.8
1.836
0.054
0.090
0.126
NCP302LSN19T1
1.862
1.9
1.938
0.057
0.095
0.133
NCP302LSN20T1
1.960
2.0
2.040
0.060
0.100
0.140
NCP302LSN21T1
2.058
2.1
2.142
0.063
0.105
0.147
NCP302LSN22T1
2.156
2.2
2.244
0.066
0.110
0.154
NCP302LSN23T1
2.254
2.3
2.346
0.069
0.115
0.161
NCP302LSN24T1
2.352
2.4
2.448
0.072
0.120
0.168
NCP302LSN25T1
2.450
2.5
2.550
0.075
0.125
0.175
NCP302LSN26T1
2.548
2.6
2.652
0.078
0.130
0.182
NCP302LSN27T1
2.646
2.7
2.754
0.081
0.135
0.189
NCP302LSN28T1
2.744
2.8
2.856
0.084
0.140
0.196
NCP302LSN29T1
2.842
2.9
2.958
0.087
0.145
0.203
NCP302LSN30T1
2.940
3.0
3.060
0.090
0.150
0.210
NCP302LSN31T1
3.038
3.1
3.162
0.093
0.155
0.217
NCP302LSN32T1
3.136
3.2
3.264
0.096
0.160
0.224
NCP302LSN33T1
3.234
3.3
3.366
0.099
0.165
0.231
NCP302LSN34T1
3.332
3.4
3.468
0.102
0.170
0.238
NCP302LSN35T1
3.430
3.5
3.570
0.105
0.175
0.245
NCP302LSN36T1
3.528
3.6
3.672
0.108
0.180
0.252
NCP302LSN37T1
3.626
3.7
3.774
0.111
0.185
0.259
NCP302LSN38T1
3.724
3.8
3.876
0.114
0.190
0.266
NCP302LSN39T1
3.822
3.9
3.978
0.117
0.195
0.273
NCP302LSN40T1
3.920
4.0
4.080
0.120
0.200
0.280
NCP302LSN41T1
4.018
4.1
4.182
0.123
0.205
0.287
NCP302LSN42T1
4.116
4.2
4.284
0.126
0.210
0.294
NCP302LSN43T1
4.214
4.3
4.386
0.129
0.215
0.301
NCP302LSN44T1
4.312
4.4
4.488
0.132
0.220
0.308
NCP302LSN45T1
4.410
4.5
4.590
0.135
0.225
0.315
NCP302LSN46T1
4.508
4.6
4.692
0.138
0.230
0.322
NCP302LSN47T1
4.606
4.7
4.794
0.141
0.235
0.329
NCP302LSN48T1
4.704
4.8
4.896
0.144
0.240
0.336
NCP302LSN49T1
4.802
4.9
4.998
0.147
0.245
0.343
3.
4.
5.
6.
Condition 1:
Condition 2:
Condition 3:
Condition 4:
Condition 4:
7. Condition 5:
1.0
2.0
0.4
0.6
3.0
0.9 — 2.9 V, Vin = VDET− − 0.10 V; 3.0 — 3.9 V, Vin = VDET− − 0.13 V; 4.0 — 4.9 V, Vin = VDET− − 0.16 V
0.9 — 4.9 V, Vin = VDET− + 2.0 V
0.9 — 4.9 V, Vin = 0.7 V, VOUT = 0.05 V, Active Low ‘L’ Suffix Devices
0.9 — 1.0 V, Vin = 0.85 V, VOUT = 0.5 V; 1.1 — 1.5 V, Vin = 1.0 V, VOUT = 0.5 V; 1.6 — 4.9 V, Vin = 1.5 V, VOUT = 0.5 V,
Active Low ‘L’ Suffix Devices
0.9 — 3.9 V, Vin = 4.5 V, VOUT = 2.4 V; 4.0 — 4.9 V, Vin = 8.0 V, VOUT = 5.9 V, Active Low ‘L’ Suffix Devices
http://onsemi.com
8
NCP302, NCP303
Table 2. ELECTRICAL CHARACTERISTIC TABLE FOR 0.9 − 4.9 V
Pch Source Current
Vin High
Nch
Sink
Current
Vin Low
Vin High
Iin
(A) (2)
IOUT
(mA) (3)
IOUT
(mA) (4)
IOUT
(mA) (5)
Supply Current
NCP302 Series
Detector Threshold
Detector Threshold
Hysteresis
Vin Low
VHYS (V)
Iin
(A) (1)
VDET− (V)
Min
Typ
Max
Min
Typ
Max
Typ
Typ
Typ
Typ
Typ
NCP302HSN09T1
Part Number
0.882
0.9
0.918
0.027
0.045
0.063
0.3
0.5
2.5
0.04
0.08
NCP302HSN10T1
0.980
1.0
1.020
0.030
0.050
0.070
NCP302HSN11T1
1.078
1.1
1.122
0.033
0.055
0.077
NCP302HSN12T1
1.176
1.2
1.224
0.036
0.060
0.084
NCP302HSN13T1
1.274
1.3
1.326
0.039
0.065
0.091
NCP302HSN14T1
1.372
1.4
1.428
0.042
0.070
0.098
NCP302HSN15T1
1.470
1.5
1.530
0.045
0.075
0.105
NCP302HSN16T1
1.568
1.6
1.632
0.048
0.080
0.112
NCP302HSN17T1
1.666
1.7
1.734
0.051
0.085
0.119
NCP302HSN18T1
1.764
1.8
1.836
0.054
0.090
0.126
NCP302HSN19T1
1.862
1.9
1.938
0.057
0.095
0.133
NCP302HSN20T1
1.960
2.0
2.040
0.060
0.100
0.140
NCP302HSN21T1
2.058
2.1
2.142
0.063
0.105
0.147
NCP302HSN22T1
2.156
2.2
2.244
0.066
0.110
0.154
NCP302HSN23T1
2.254
2.3
2.346
0.069
0.115
0.161
NCP302HSN24T1
2.352
2.4
2.448
0.072
0.120
0.168
NCP302HSN25T1
2.450
2.5
2.550
0.075
0.125
0.175
NCP302HSN26T1
2.548
2.6
2.652
0.078
0.130
0.182
NCP302HSN27T1
2.646
2.7
2.754
0.081
0.135
0.189
NCP302HSN28T1
2.744
2.8
2.856
0.084
0.140
0.196
NCP302HSN29T1
2.842
2.9
2.958
0.087
0.145
0.203
NCP302HSN30T1
2.940
3.0
3.060
0.090
0.150
0.210
NCP302HSN31T1
3.038
3.1
3.162
0.093
0.155
0.217
NCP302HSN32T1
3.136
3.2
3.264
0.096
0.160
0.224
NCP302HSN33T1
3.234
3.3
3.366
0.099
0.165
0.231
NCP302HSN34T1
3.332
3.4
3.468
0.102
0.170
0.238
NCP302HSN35T1
3.430
3.5
3.570
0.105
0.175
0.245
NCP302HSN36T1
3.528
3.6
3.672
0.108
0.180
0.252
NCP302HSN37T1
3.626
3.7
3.774
0.111
0.185
0.259
NCP302HSN38T1
3.724
3.8
3.876
0.114
0.190
0.266
NCP302HSN39T1
3.822
3.9
3.978
0.117
0.195
0.273
NCP302HSN40T1
3.920
4.0
4.080
0.120
0.200
0.280
NCP302HSN41T1
4.018
4.1
4.182
0.123
0.205
0.287
NCP302HSN42T1
4.116
4.2
4.284
0.126
0.210
0.294
NCP302HSN43T1
4.214
4.3
4.386
0.129
0.215
0.301
NCP302HSN44T1
4.312
4.4
4.488
0.132
0.220
0.308
NCP302HSN45T1
4.410
4.5
4.590
0.135
0.225
0.315
NCP302HSN46T1
4.508
4.6
4.692
0.138
0.230
0.322
NCP302HSN47T1
4.606
4.7
4.794
0.141
0.235
0.329
NCP302HSN48T1
4.704
4.8
4.896
0.144
0.240
0.336
NCP302HSN49T1
4.802
4.9
4.998
0.147
0.245
0.343
8. Condition 1:
9. Condition 2:
10. Condition 3:
11. Condition 4:
12. Condition 5:
0.18
11
0.6
0.4
0.6
0.9 — 2.9 V, Vin = VDET− − 0.10 V; 3.0 — 3.9 V, Vin = VDET− − 0.13 V; 4.0 — 4.9 V, Vin = VDET− − 0.16 V
0.9 — 4.9 V, Vin = VDET− + 2.0 V
0.9 — 1.4 V, Vin = 1.5 V, VOUT = 0.5 V; 1.5 — 4.9 V, Vin = 5.0 V, VOUT = 0.5 V, Active High ‘H’ Suffix Devices
0.9 — 4.9 V, Vin = 0.7 V, VOUT = 0.4 V, Active High ‘H’ Suffix Devices
0.9 — 1.0 V, Vin = 0.8 V, VOUT = GND; 1.1 — 1.5 V, Vin = 1.0 V, VOUT = GND; 1.6 — 4.9 V, Vin = 1.5 V, VOUT = GND,
Active High ‘H’ Suffix Devices
http://onsemi.com
9
NCP302, NCP303
Table 3. ELECTRICAL CHARACTERISTIC TABLE FOR 0.9 − 4.9 V
NCP303 Series
Detector Threshold
Nch Sink Current
Vin Low
Vin High
Vin Low
Vin High
VHYS (V)
Iin
(A) (1)
Iin
(A) (2)
IOUT
(mA) (3)
IOUT
(mA) (4)
VDET− (V)
Part Number
Supply Current
Detector Threshold
Hysteresis
Min
Typ
Max
Min
Typ
Max
Typ
Typ
Typ
Typ
NCP303LSN09T1
0.882
0.9
0.918
0.027
0.045
0.063
0.3
0.5
0.05
0.5
NCP303LSN10T1
0.980
1.0
1.020
0.030
0.050
0.070
NCP303LSN11T1
1.078
1.1
1.122
0.033
0.055
0.077
NCP303LSN12T1
1.176
1.2
1.224
0.036
0.060
0.084
NCP303LSN13T1
1.274
1.3
1.326
0.039
0.065
0.091
NCP303LSN14T1
1.372
1.4
1.428
0.042
0.070
0.098
NCP303LSN15T1
1.470
1.5
1.530
0.045
0.075
0.105
NCP303LSN16T1
1.568
1.6
1.632
0.048
0.080
0.112
NCP303LSN17T1
1.666
1.7
1.734
0.051
0.085
0.119
NCP303LSN18T1
1.764
1.8
1.836
0.054
0.090
0.126
NCP303LSN19T1
1.862
1.9
1.938
0.057
0.095
0.133
NCP303LSN20T1
1.960
2.0
2.040
0.060
0.100
0.140
NCP303LSN21T1
2.058
2.1
2.142
0.063
0.105
0.147
NCP303LSN22T1
2.156
2.2
2.244
0.066
0.110
0.154
NCP303LSN23T1
2.254
2.3
2.346
0.069
0.115
0.161
NCP303LSN24T1
2.352
2.4
2.448
0.072
0.120
0.168
NCP303LSN25T1
2.450
2.5
2.550
0.075
0.125
0.175
NCP303LSN26T1
2.548
2.6
2.652
0.078
0.130
0.182
NCP303LSN27T1
2.646
2.7
2.754
0.081
0.135
0.189
NCP303LSN28T1
2.744
2.8
2.856
0.084
0.140
0.196
NCP303LSN29T1
2.842
2.9
2.958
0.087
0.145
0.203
NCP303LSN30T1
2.940
3.0
3.060
0.090
0.150
0.210
NCP303LSN31T1
3.038
3.1
3.162
0.093
0.155
0.217
NCP303LSN32T1
3.136
3.2
3.264
0.096
0.160
0.224
NCP303LSN33T1
3.234
3.3
3.366
0.099
0.165
0.231
NCP303LSN34T1
3.332
3.4
3.468
0.102
0.170
0.238
NCP303LSN35T1
3.430
3.5
3.570
0.105
0.175
0.245
NCP303LSN36T1
3.528
3.6
3.672
0.108
0.180
0.252
NCP303LSN37T1
3.626
3.7
3.774
0.111
0.185
0.259
NCP303LSN38T1
3.724
3.8
3.876
0.114
0.190
0.266
NCP303LSN39T1
3.822
3.9
3.978
0.117
0.195
0.273
NCP303LSN40T1
3.920
4.0
4.080
0.120
0.200
0.280
NCP303LSN41T1
4.018
4.1
4.182
0.123
0.205
0.287
NCP303LSN42T1
4.116
4.2
4.284
0.126
0.210
0.294
NCP303LSN43T1
4.214
4.3
4.386
0.129
0.215
0.301
NCP303LSN44T1
4.312
4.4
4.488
0.132
0.220
0.308
NCP303LSN45T1
4.410
4.5
4.590
0.135
0.225
0.315
NCP303LSN46T1
4.508
4.6
4.692
0.138
0.230
0.322
NCP303LSN47T1
4.606
4.7
4.794
0.141
0.235
0.329
NCP303LSN48T1
4.704
4.8
4.896
0.144
0.240
0.336
NCP303LSN49T1
4.802
4.9
4.998
0.147
0.245
0.343
13. Condition 1:
14. Condition 2:
15. Condition 3:
16. Condition 4:
Condition 4:
1.0
2.0
0.4
0.6
0.9 — 2.9 V, Vin = VDET− − 0.10 V; 3.0 — 3.9 V, Vin = VDET− − 0.13 V; 4.0 — 4.9 V, Vin = VDET− − 0.16 V
0.9 — 4.9 V, Vin = VDET− + 2.0 V
0.9 — 4.9 V, Vin = 0.7 V, VOUT = 0.05 V, Active Low ‘L’ Suffix Devices
0.9 — 1.0 V, Vin = 0.85 V, VOUT = 0.5 V; 1.1 — 1.5 V, Vin = 1.0 V, VOUT = 0.5 V; 1.6 — 4.9 V, Vin = 1.5 V, VOUT = 0.5 V,
Active Low ‘L’ Suffix Devices
http://onsemi.com
10
0.98
0.96
VDET+
0.94
0.92
VDET−
0.90
0.88
0.86
−50
0
−25
25
75
50
100
TA, AMBIENT TEMPERATURE (°C)
VDET, DETECTOR THRESHOLD VOLTAGE (V)
VDET, DETECTOR THRESHOLD VOLTAGE (V)
NCP302, NCP303
3.00
2.95
2.90
VDET+
2.85
2.80
2.75
VDET−
2.70
2.65
2.60
−50
VTCD, CD PIN THRESHOLD VOLTAGE (V)
VDET, DETECTOR THRESHOLD VOLTAGE (V)
4.8
VDET+
4.7
4.6
VDET−
4.5
4.4
0
25
50
75
100
Vin = 0.99 V
0.7
0.6
0.5
0.4
0.3
−50
Vin = 2.97 V
2.2
2.1
2.0
1.9
100
VTCD, CD PIN THRESHOLD VOLTAGE (V)
VTCD, CD PIN THRESHOLD VOLTAGE (V)
−25
0
75
25
50
TA, AMBIENT TEMPERATURE (°C)
100
Figure 6. NCP302/3 Series 0.9 V
CD Delay Pin Threshold Voltage vs. Temperature
2.3
0
75
25
50
TA, AMBIENT TEMPERATURE (°C)
100
0.8
Figure 5. NCP302/3 Series 4.5 V
Detector Threshold Voltage vs. Temperature
−25
75
0.9
TA, AMBIENT TEMPERATURE (°C)
1.8
−50
50
Figure 4. NCP302/3 Series 2.7 V
Detector Threshold Voltage vs. Temperature
4.9
−25
25
TA, AMBIENT TEMPERATURE (°C)
Figure 3. NCP302/3 Series 0.9 V
Detector Threshold Voltage vs. Temperature
4.3
−50
0
−25
3.3
Vin = 4.95 V
3.2
3.1
3.0
2.9
2.8
2.7
−50
−25
0
25
50
75
100
TA, AMBIENT TEMPERATURE (°C)
Figure 7. NCP302/3 Series 2.7 V
CD Delay Pin Threshold Voltage vs. Temperature
Figure 8. NCP302/3 Series 4.5 V
CD Delay Pin Threshold Voltage vs. Temperature
http://onsemi.com
11
ICD, CD DELAY PIN SINK CURRENT (mA)
0.6
TA = 25°C
0.5
Vin = 0.85 V
0.4
0.3
0.2
Vin = 0.7 V
0.1
0
0
0.4
0.2
0.6
1.0
0.8
8.0
TA = 25°C
7.0
Vin = 2.5 V
6.0
5.0
Vin = 2.0 V
4.0
3.0
2.0
Vin = 1.5 V
1.0
0
0
1.5
2.0
VCD, DELAY PIN VOLTAGE (V)
Figure 9. NCP302/3 Series 0.9 V
CD Delay Pin Sink Current vs. Voltage
Figure 10. NCP302/3 Series 2.7 V
CD Delay Pin Sink Current vs. Voltage
2.5
10000
18
16
TA = 25°C
TA = 25°C
Vin = 4.0 V
1000
14
Vin = 3.5 V
12
10
Vin = 3.0 V
8.0
6.0
Vin = 2.5 V
4.0
tD1 (s)
100
tD2 (ms)
10
1.0
2.0
0.1
0
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
0.0001
4.0
0.001
0.01
0.1
1.0
CD, DELAY PIN CAPACITANCE (F)
VCD, DELAY PIN VOLTAGE (V)
Figure 11. NCP302/3 Series 4.5 V
CD Delay Pin Sink Current vs. Voltage
Figure 12. NCP302/3 Series 0.9 V
Output Time Delay vs. Capacitance
10000
10000
TA = 25°C
TA = 25°C
t D1, t D2 , OUTPUT TIME DELAY
t D1, t D2 , OUTPUT TIME DELAY
1.0
0.5
VCD, DELAY PIN VOLTAGE (V)
t D1, t D2 , OUTPUT TIME DELAY
ICD, CD DELAY PIN SINK CURRENT (mA)
ICD, CD DELAY PIN SINK CURRENT (mA)
NCP302, NCP303
1000
1000
tD1 (s)
100
tD2 (ms)
10
1.0
0.1
tD1 (s)
100
tD2 (ms)
10
1.0
0.1
0.0001
0.001
0.01
0.1
1.0
0.0001
CD, DELAY PIN CAPACITANCE (F)
0.001
0.01
0.1
CD, DELAY PIN CAPACITANCE (F)
Figure 13. NCP302/3 Series 2.7 V
Output Time Delay vs. Capacitance
Figure 14. NCP302/3 Series 4.5 V
Output Time Delay vs. Capacitance
http://onsemi.com
12
1.0
NCP302, NCP303
3.0
VOUT, OUTPUT VOLTAGE (V)
VOUT, OUTPUT VOLTAGE (V)
1.0
0.8
0.6
0.4
TA = −30°C (303L only)
TA = 25°C (303L only)
TA = 85°C (303L only)
0.2
2.5
2.0
1.5
1.0
TA = −30°C (303L only)
TA = 25°C (303L only)
TA = 85°C (303L only)
0.5
0
0
0
0.2
0.4
0.6
Vin, INPUT VOLTAGE (V)
1.0
0.8
0
Figure 15. NCP302L/3L Series 0.9 V
Reset Output Voltage vs. Input Voltage
IOUT, OUTPUT SINK CURRENT (mA)
VOUT, OUTPUT VOLTAGE (V)
6.0
5.0
4.0
3.0
TA = −30°C (303L only)
TA = 25°C (303L only)
TA = 85°C (303L only)
1.0
0
0
1.0
2.0
4.0
3.0
Vin, INPUT VOLTAGE (V)
5.0
3.0
1.2
TA = 25°C
1.0
Vin = 0.85 V
0.8
0.6
0.4
Vin = 0.7 V
0.2
0
6.0
0
0.4
0.2
0.6
1.0
0.8
VOUT, OUTPUT VOLTAGE (V)
Figure 17. NCP302L/3L Series 4.5 V
Reset Output Voltage vs. Input Voltage
Figure 18. NCP302H/3L Series 0.9 V
Reset Output Sink Current vs. Output Voltage
16
35
IOUT, OUTPUT SINK CURRENT (mA)
IOUT, OUTPUT SINK CURRENT (mA)
2.5
Figure 16. NCP302L/3L Series 2.7 V
Reset Output Voltage vs. Input Voltage
7.0
2.0
0.5
1.5
2.0
Vin, INPUT VOLTAGE (V)
1.0
TA = 25°C
14
Vin = 2.5 V
12
10
8.0
Vin = 2.0 V
6.0
4.0
Vin = 1.5 V
2.0
0
0
0.5
1.0
1.5
2.0
TA = 25°C
30
25
Vin = 3.5 V
20
Vin = 3.0 V
15
Vin = 2.5 V
10
Vin = 2.0 V
5.0
Vin = 1.5 V
0
0
2.5
Vin = 4.0 V
0.5
1.0
1.5
2.0
2.5
3.0
3.5
VOUT, OUTPUT VOLTAGE (V)
VOUT, OUTPUT VOLTAGE (V)
Figure 19. NCP302H/3L Series 2.7 V
Reset Output Sink Current vs. Output Voltage
Figure 20. NCP302H/3L Series 4.5 V
Reset Output Sink Current vs. Output Voltage
http://onsemi.com
13
4.0
NCP302, NCP303
1.2
5.5
TA = 25°C
1.0
Iin, INPUT CURRENT (A)
Iin, INPUT CURRENT (A)
TA = 25°C
0.8
0.6
0.4
0.2
0
2.5
2.0
1.5
1.0
0.5
0
0
2.0
4.0
6.0
8.0
10
0
2.0
Vin, INPUT VOLTAGE (V)
Figure 21. NCP302/3 Series 0.9 V
Input Current vs. Input Voltage
4.0
6.0
Vin, INPUT VOLTAGE (V)
8.0
10
Figure 22. NCP302/3 Series 2.7 V
Input Current vs. Input Voltage
11.8
250
tD2, OUTPUT TIME DELAY (ms)
Iin, INPUT CURRENT (A)
TA = 25°C
2.5
2.0
1.5
1.0
0.5
0
0
2.0
4.0
6.0
Vin, INPUT VOLTAGE (V)
150
100
50
0
−50
10
8.0
0
25
75
50
100
Figure 24. NCP302/3 Series 0.9 V
Reset Output Time Delay vs. Temperature
350
250
CD = 0.1 F
300
tD2, OUTPUT TIME DELAY (ms)
tD2, OUTPUT TIME DELAY (ms)
−25
TA, AMBIENT TEMPERATURE (°C)
Figure 23. NCP302/3 Series 4.5 V
Input Current vs. Input Voltage
250
200
150
100
50
0
−50
CD = 0.1 F
200
−25
0
25
50
75
100
CD = 0.1 F
200
150
100
50
0
−50
TA, AMBIENT TEMPERATURE (°C)
−25
0
25
50
75
TA, AMBIENT TEMPERATURE (°C)
Figure 25. NCP302/3 Series 2.7 V
Reset Output Time Delay vs. Temperature
Figure 26. NCP302/3 Series 4.5 V
Reset Output Time Delay vs. Temperature
http://onsemi.com
14
100
NCP302, NCP303
9.0
VOUT = 0.5 V
1.4
IOUT, OUTPUT SINK CURRENT (mA)
IOUT, OUTPUT SINK CURRENT (mA)
1.6
TA = −30°C
1.2
TA = 25°C
1.0
0.8
0.6
TA = 85°C
0.4
0.2
0
0
0.4
0.2
0.6
TA = 25°C
4.0
3.0
TA = 85°C
2.0
1.0
0
0.5
1.0
1.5
2.5
2.0
Vin, INPUT VOLTAGE (V)
Figure 27. NCP302H/3L Series 0.9 V
Reset Output Sink Current vs. Input Voltage
Figure 28. NCP302H/3L Series 2.7 V
Reset Output Sink Current vs. Input Voltage
ICD, CD DELAY PIN SINK CURRENT (mA)
12
10
TA = −30°C
8.0
TA = 25°C
6.0
TA = 85°C
4.0
2.0
0
2.0
1.0
3.0
5.0
4.0
VCD = 0.5 V
TA = −30°C
0.6
TA = 25°C
0.5
0.4
0.3
TA = 85°C
0.2
0.1
0
0
0.2
0.4
0.6
0.8
Vin, INPUT VOLTAGE (V)
Figure 29. NCP302H/3L Series 4.5 V
Reset Output Sink Current vs. Input Voltage
Figure 30. NCP302/3 Series 0.9 V
CD Delay Pin Sink Current vs. Input Voltage
5.0
VCD = 0.5 V
4.0
TA = −30°C
3.0
TA = 25°C
2.0
TA = 85°C
1.0
0
0.5
1.0
1.5
2.0
2.5
3.0
1.0
6.0
VCD = 0.5 V
5.0
TA = −30°C
4.0
TA = 25°C
3.0
TA = 85°C
2.0
1.0
0
0
1.0
2.0
3.0
4.0
Vin, INPUT VOLTAGE (V)
Vin, INPUT VOLTAGE (V)
Figure 31. NCP302/3 Series 2.7 V
CD Delay Pin Sink Current vs. Input Voltage
Figure 32. NCP302/3 Series 4.5 V
CD Delay Pin Sink Current vs. Input Voltage
http://onsemi.com
15
3.0
0.7
Vin, INPUT VOLTAGE (V)
ICD, CD DELAY PIN SINK CURRENT (mA)
IOUT, OUTPUT SINK CURRENT (mA)
ICD, CD DELAY PIN SINK CURRENT (mA)
5.0
Vin, INPUT VOLTAGE (V)
VOUT = 0.5 V
0
6.0
0
14
0
TA = −30°C
7.0
1.0
0.8
VOUT = 0.5 V
8.0
5.0
12
IOUT, OUTPUT SOURCE CURRENT (mA)
IOUT, OUTPUT SOURCE CURRENT (mA)
NCP302, NCP303
VOUT = Vin −2.1 V
TA = 25°C
10
Vin −1.5 V
8.0
6.0
Vin −1.0 V
4.0
Vin −0.5 V
2.0
0
0
2.0
4.0
6.0
8.0
12
VOUT = Vin −2.1 V
TA = 25°C
10
Vin −1.5 V
8.0
Vin −1.0 V
6.0
4.0
Vin −0.5 V
2.0
0
0
10
8.0
6.0
10
Vin, INPUT VOLTAGE (V)
Vin, INPUT VOLTAGE (V)
Figure 33. NCP302L Series 0.9 V
Reset Output Source Current vs. Input Voltage
Figure 34. NCP302L Series 2.7 V
Reset Output Source Current vs. Input Voltage
2.0
12
VOUT = Vin −2.1 V
10
RD, DELAY RESISTANCE (M)
IOUT, OUTPUT SOURCE CURRENT (mA)
4.0
2.0
TA = 25°C
Vin −1.5 V
8.0
Vin −1.0 V
6.0
4.0
Vin −0.5 V
2.0
0
0
2.0
4.0
6.0
8.0
1.6
1.2
0.8
0.4
0
−50
10
Vin, INPUT VOLTAGE (V)
−25
0
25
50
75
TA, AMBIENT TEMPERATURE (°C)
Figure 35. NCP302L Series 4.5 V
Reset Output Source Current vs. Input Voltage
Figure 36. NCP302/3 Series
Delay Resistance vs. Temperature
http://onsemi.com
16
100
NCP302, NCP303
OPERATING DESCRIPTION
Vin will again return to its nominal level and become greater
than the VDET+. The voltage detector will turn off the
N−Channel MOSFET and allow pullup resistor RD to charge
external capacitor CD, thus creating a programmable delay
for releasing the reset signal. When the voltage at Pin 5
exceeds the inverter/buffer threshold, typically 0.675 Vin,
the reset output will revert back to its original state. The reset
output time delay versus capacitance is shown in Figures 12
through 14. The voltage detector and inverter/buffer have
built−in hysteresis to prevent erratic reset operation.
Although these device series are specifically designed for
use as reset controllers in portable microprocessor based
systems, they offer a cost−effective solution in numerous
applications where precise voltage monitoring and time
delay are required. Figures 38 through 45 show various
application examples.
The NCP302 and NCP303 series devices consist of a
precision voltage detector that drives a time delay generator.
Figures 37 and 38 show a timing diagram and a typical
application. Initially consider that input voltage Vin is at a
nominal level and it is greater than the voltage detector upper
threshold (VDET+). The voltage at Pin 5 and capacitor CD
will be at the same level as Vin, and the reset output (Pin 1)
will be in the high state for active low devices, or in the low
state for active high devices. If there is a power interruption
and Vin becomes significantly deficient, it will fall below the
lower detector threshold (VDET−) and the external time
delay capacitor CD will be immediately discharged by an
internal N−Channel MOSFET that connects to Pin 5. This
sequence of events causes the Reset output to be in the low
state for active low devices, or in the high state for active
high devices. After completion of the power interruption,
Input Voltage, Pin 2
Vin
VDET+
VDET−
Vin
Capacitor, Pin 5
Reset Output (Active Low), Pin 1
0.675 Vin
Vin
VDET−
0V
Reset Output (Active High), Pin 1
Vin
VDET−
0V
tD2
Figure 37. Timing Waveforms
http://onsemi.com
17
NCP302, NCP303
APPLICATION CIRCUIT INFORMATION
VDD
2
5
CD
CD
1
NCP302
Series
Microprocessor
Reset
Reset Output
* Required for
GN
D
3
VDD
*
Input
GND
NCP303
Figure 38. Microprocessor Reset Circuit
2.85 V
2.70 V
Vin < 2.7 ON
2
5
CD
Input
1
NCP302
LSN27T1
To Additional Circuitry
Reset Output
Vin > 2.835 ON
3
GN
D
Figure 39. Battery Charge Indicator
Vsupply
5.0 V
1.0 V
0V
2
5
CD
CD
NCP303
LSN45T1
3
470 k
Input
1
To Additional Circuitry
Reset Output
0.001 F
Missing Pulse
GN
D
Input
0V
Vin
0.675*Vin
CD
Reset Output
tD2
Figure 40. Missing Pulse Detector or Frequency Detector
http://onsemi.com
18
NCP302, NCP303
VDD
RH
2
VDD
Input
RL
5
CD
1
NCP301
NCP303
LSN27T1
3
Microprocessor
Reset
Reset Output
GN
D
GN
D
Figure 41. Microprocessor Reset Circuit with Additional Hysteresis
Comparator hysteresis can be increased with the addition of
resistor RH. The hysteresis equations have been simplified and
do not account for the change of input current Iin as Vin crosses
the comparator threshold. The internal resistance, Rin is simply
calculated using Iin = 0.26 A at 2.6 V.
Vin Decreasing:
V th RR
H
1 V DET
in
Vin Increasing:
V th RH
1 V DET V HYS
R in R L
VHYS = Vin Increasing − Vin Decreasing
Test Data
ÁÁÁÁÁÁ
ÁÁÁÁÁÁ
ÁÁÁ
ÁÁÁ
ÁÁ
ÁÁÁÁÁÁ
ÁÁÁÁÁÁ
ÁÁÁ
ÁÁÁ
ÁÁ
ÁÁÁÁÁÁ
ÁÁÁÁÁÁ
ÁÁÁ
ÁÁÁ
ÁÁ
ÁÁÁÁÁÁ
ÁÁÁÁÁÁ
ÁÁÁ
ÁÁÁ
ÁÁ
ÁÁÁÁÁÁ
ÁÁÁÁÁÁ
ÁÁÁ
ÁÁÁ
ÁÁ
ÁÁÁÁÁÁ
ÁÁÁÁÁÁ
ÁÁÁ
ÁÁÁ
ÁÁ
ÁÁÁÁÁÁ
ÁÁÁÁÁÁ
ÁÁÁ
ÁÁÁ
ÁÁÁÁÁÁ
ÁÁÁÁÁÁ
ÁÁÁ
ÁÁÁÁÁ
ÁÁ
Vth Decreasing
(V)
Vth Increasing
(V)
VHYS
(V)
RH
()
RL
(k)
2.70
2.70
2.70
2.70
2.70
2.70
2.70
2.70
2.70
2.70
2.84
2.87
2.88
2.91
2.90
2.94
2.98
2.70
3.04
3.15
0.135
0.17
0.19
0.21
0.20
0.24
0.28
0.27
0.34
0.35
0
100
100
100
220
220
220
470
470
470
−
10
6.8
4.3
10
6.8
4.3
10
6.8
4.3
5.0 V
100 k
Test Data
C
2
CD
NCP301
NCP302
HSN27T1
LSN27T1
3
fOSC (kHz)
IQ (A)
0.01
2590
21.77
1
0.1
490
21.97
Reset Output
1.0
52
22.07
82 k
5
C (F)
Input
GN
D
Figure 42. Simple Clock Oscillator
http://onsemi.com
19
NCP302, NCP303
Vsupply
This circuit monitors the current at the load. As
current flows through the load, a voltage drop with
respect to ground appears across Rsense where
Vsense = Iload * Rsense. The following conditions apply:
Load
VDD
Rsense
2
If:
ILoad VDET − /Rsense
ILoad (VDET −+VHYS)/Rsense
Input
50 k
5
CD
NCP301
NCP303
LSN09T1
LSN27T1
3
1
Then:
Reset Output = 0 V
Reset Output = VDD
Microcontroller
Reset Output
GND
GND
Figure 43. Microcontroller Systems Load Sensing
Vsupply
2
5
CD
5
CD
Input
NCP303
NCP301
LSN27T1
LSN45T1
3
GND
2
Input
NCP303
NCP301
LSN27T1
3
GND
2
Input
1
Reset
Output
1
Reset
Output
Vin = 1.0 V to 10 V
5
CD
NCP303
NCP301
LSN27T1
LSN18T1
3
1
Reset
Output
GND
A simple voltage monitor can be constructed by connecting several voltage detectors as shown above. Each LED will
sequentially turn on when the respective voltage detector threshold (VDET− +VHYS) is exceeded. Note that detector
thresholds (VDET−) that range from 0.9 V to 4.9 V in 100 mV steps can be manufactured.
Figure 44. LED Bar Graph Voltage Monitor
http://onsemi.com
20
NCP302, NCP303
Power Supply 1
2
5
CD
Input
1
NCP303
LSN18T1
3
GN
D
2
Input
Reset Output
Reset Output
To MCU or Logic
Circuitry
Power Supply 2
1
NCP300
LSN33T1
3
GN
D
2
Input
Reset Output
Power Supply 3
1
NCP300
LSN45T1
3
Reset Output
GN
D
For monitoring power supplies with a time delay reset, only a single NCP303 with delay capacitor is required.
Figure 45. Multiple Power Supply Undervoltage
Supervision with Time Delay Reset
http://onsemi.com
21
NCP302, NCP303
ORDERING INFORMATION
Device
Threshold
Voltage
Output
Type
Reset
Marking
Package
NCP302LSN09T1
0.9
SBO
TSOP−5
NCP302LSN09T1G
0.9
SBO
TSOP−5
(Pb−Free)
NCP302LSN15T1
1.5
SBI
TSOP−5
NCP302LSN18T1
1.8
SBF
TSOP−5
NCP302LSN20T1
2.0
SBD
TSOP−5
NCP302LSN27T1
2.7
SAW
TSOP−5
NCP302LSN27T1G
2.7
SAW
TSOP−5
(Pb−Free)
NCP302LSN30T1
3.0
SAT
TSOP−5
NCP302LSN30T1G
3.0
SAT
TSOP−5
(Pb−Free)
SAQ
TSOP−5
CMOS
Active
Low
NCP302LSN33T1
3.3
NCP302LSN33T1G
3.3
SAQ
TSOP−5
(Pb−Free)
NCP302LSN38T1
3.8
SAK
TSOP−5
(Pb−Free)
NCP302LSN38T1G
3.8
SAK
TSOP−5
NCP302LSN40T1
4.0
SAI
TSOP−5
NCP302LSN43T1
4.3
SAF
TSOP−5
NCP302LSN45T1
4.5
SAL
TSOP−5
NCP302LSN45T1G
4.5
SAL
TSOP−5
(Pb−Free)
NCP302LSN47T1
4.7
SAC
TSOP−5
NCP302HSN09T1
0.9
SDO
TSOP−5
NCP302HSN18T1
1.8
SFH
TSOP−5
NCP302HSN27T1
2.7
SDK
TSOP−5
NCP302HSN30T1
3.0
SDI
TSOP−5
NCP302HSN40T1
4.0
SJH
TSOP−5
NCP302HSN45T1
4.5
SDG
TSOP−5
NCP302HSN45T1G
4.5
SDG
TSOP−5
(Pb−Free)
NCP303LSN09T1
0.9
SDE
TSOP−5
NCP303LSN09T1G
0.9
SDE
TSOP−5
(Pb−Free)
NCP303LSN10T1
1.0
SDD
TSOP−5
NCP303LSN10T1G
1.0
SDD
TSOP−5
(Pb−Free)
NCP303LSN11T1
1.1
SDC
TSOP−5
CMOS
Open
Drain
Active
c e
Hi h
High
Active
Low
Shipping†
3000 / Tape & Reel
(7 inch Reel)
NOTE: The ordering information lists standard undervoltage thresholds with active low outputs. Additional active low threshold devices, ranging
from 0.9 V to 4.9 V in 100 mV increments and NCP302 active high output devices, ranging from 0.9 V to 4.9 V in 100 mV increments can be
manufactured. Contact your ON Semiconductor representative for availability. The electrical characteristics of these additional devices are
shown in Tables 1 and 2.
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
http://onsemi.com
22
NCP302, NCP303
ORDERING INFORMATION
Device
Threshold
Voltage
Output
Type
Reset
Marking
Package
NCP303LSN13T1
1.3
SDA
TSOP−5
NCP303LSN14T1
1.4
SCZ
TSOP−5
NCP303LSN15T1
1.5
SCY
TSOP−5
NCP303LSN15T1G
1.5
SCY
TSOP−5
(Pb−Free)
NCP303LSN16T1
1.6
SCX
TSOP−5
NCP303LSN18T1
1.8
SCV
TSOP−5
NCP303LSN20T1
2.0
SCT
TSOP−5
NCP303LSN20T1G
2.0
SCT
TSOP−5
(Pb−Free)
NCP303LSN22T1
2.2
SCR
TSOP−5
NCP303LSN23T1
2.3
SCQ
TSOP−5
NCP303LSN24T1
2.4
SCP
TSOP−5
NCP303LSN25T1
2.5
SCO
TSOP−5
NCP303LSN25T1G
2.5
SCO
TSOP−5
(Pb−Free)
NCP303LSN26T1
2.6
SCN
TSOP−5
NCP303LSN26T1G
2.6
SCN
TSOP−5
(Pb−Free)
NCP303LSN27T1
2.7
SCM
TSOP−5
NCP303LSN27T1G
2.7
SCM
TSOP−5
(Pb−Free)
NCP303LSN28T1
2.8
SCL
TSOP−5
NCP303LSN28T1G
2.8
SCL
TSOP−5
(Pb−Free)
NCP303LSN29T1
2.9
SCK
TSOP−5
NCP303LSN29T1G
2.9
SCK
TSOP−5
(Pb−Free)
NCP303LSN30T1
3.0
SCJ
TSOP−5
NCP303LSN30T1G
3.0
SCJ
TSOP−5
(Pb−Free)
NCP303LSN31T1
3.1
SCI
TSOP−5
NCP303LSN32T1
3.2
SCH
TSOP−5
NCP303LSN33T1
3.3
SCG
TSOP−5
NCP303LSN34T1
3.4
SCF
TSOP−5
NCP303LSN36T1
3.6
SCD
TSOP−5
NCP303LSN38T1
3.8
SCA
TSOP−5
Open
Drain
Active
Low
Shipping†
3000 / Tape & Reel
(7 inch Reel)
NOTE: The ordering information lists standard undervoltage thresholds with active low outputs. Additional active low threshold devices, ranging
from 0.9 V to 4.9 V in 100 mV increments and NCP302 active high output devices, ranging from 0.9 V to 4.9 V in 100 mV increments can be
manufactured. Contact your ON Semiconductor representative for availability. The electrical characteristics of these additional devices are
shown in Tables 1 and 2.
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
http://onsemi.com
23
NCP302, NCP303
ORDERING INFORMATION
Device
Threshold
Voltage
Output
Type
Reset
Marking
Package
NCP303LSN40T1
4.0
SBY
TSOP−5
NCP303LSN42T1
4.2
SBW
TSOP−5
NCP303LSN42T1G
4.2
SBW
TSOP−5
(Pb−Free)
NCP303LSN44T1
4.4
SBU
TSOP−5
NCP303LSN44T1G
4.4
SBU
TSOP−5
(Pb−Free)
NCP303LSN45T1
4.5
SBT
TSOP−5
NCP303LSN45T1G
4.5
SBT
TSOP−5
(Pb−Free)
NCP303LSN46T1
4.6
SBS
TSOP−5
NCP303LSN46T1G
4.6
SBS
TSOP−5
(Pb−Free)
NCP303LSN47T1
4.7
SBR
TSOP−5
O en
Open
Drain
Active
Low
Shipping†
3000 / Ta
Tape
e & Reel
(7 inch Reel)
NOTE: The ordering information lists standard undervoltage thresholds with active low outputs. Additional active low threshold devices, ranging
from 0.9 V to 4.9 V in 100 mV increments and NCP302 active high output devices, ranging from 0.9 V to 4.9 V in 100 mV increments can be
manufactured. Contact your ON Semiconductor representative for availability. The electrical characteristics of these additional devices are
shown in Tables 1 and 2.
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
http://onsemi.com
24
NCP302, NCP303
PACKAGE DIMENSIONS
THIN SOT−23−5/TSOP−5/SC59−5
CASE 483−02
ISSUE C
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
3. MAXIMUM LEAD THICKNESS INCLUDES
LEAD FINISH THICKNESS. MINIMUM LEAD
THICKNESS IS THE MINIMUM THICKNESS
OF BASE MATERIAL.
4. A AND B DIMENSIONS DO NOT INCLUDE
MOLD FLASH, PROTRUSIONS, OR GATE
BURRS.
D
S
5
4
1
2
3
B
L
MILLIMETERS
INCHES
DIM MIN
MAX
MIN
MAX
A
2.90
3.10 0.1142 0.1220
B
1.30
1.70 0.0512 0.0669
C
0.90
1.10 0.0354 0.0433
D
0.25
0.50 0.0098 0.0197
G
0.85
1.05 0.0335 0.0413
H 0.013 0.100 0.0005 0.0040
J
0.10
0.26 0.0040 0.0102
K
0.20
0.60 0.0079 0.0236
L
1.25
1.55 0.0493 0.0610
M
0_
10 _
0_
10 _
S
2.50
3.00 0.0985 0.1181
G
A
J
C
0.05 (0.002)
H
M
K
SOLDERING FOOTPRINT*
0.95
0.037
1.9
0.074
2.4
0.094
1.0
0.039
0.7
0.028
SCALE 10:1
mm
inches
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
http://onsemi.com
25
NCP302, NCP303
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 61312, Phoenix, Arizona 85082−1312 USA
Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada
Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
ON Semiconductor Website: http://onsemi.com
Order Literature: http://www.onsemi.com/litorder
Japan: ON Semiconductor, Japan Customer Focus Center
2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051
Phone: 81−3−5773−3850
http://onsemi.com
26
For additional information, please contact your
local Sales Representative.
NCP302/D
Similar pages