NKK ND3KC10P 8mm process sealed smt dip rotary Datasheet

8mm Process Sealed SMT DIP Rotaries
Series ND3
Distinctive Characteristics
Sealed construction prevents contact contamination and allows vapor phase and
IR reflow soldering. Sealed design accomplished with seals between the actuator
and housing and between housing and base.
Highly visible legends and choice of screwdriver or shaft actuation
to provide trouble-free code setting.
Detent mechanism designed for crisp, positive action for
accurate switch setting.
Bifurcated, spring loaded contacts give unmatched
logic-level reliability.
Heat tolerant resin used for body meets UL
flammability rating of 94V-0 and maintains
switch reliability through vapor phase and
infrared convection reflow soldering.
Gull-winged terminals ensure mechanical
stability during soldering and simplified
solder joint inspection.
.100” (2.54mm) terminal grid spacing between
pin centers, plus 3-by-3 terminal arrangement for
pad layout pattern equivalent to industry standard.
Epoxy sealed terminals lock out flux, solvents, and other contaminants.
Packaging in tape-reel or partitioned tray. Tape-reel packaging meets
EIA-481-2 Standard.
Coplanarity: all considered surfaces must lie between two parallel planes that are
a maximum distance apart of .0059” (0.15mm). (Additional coplanarity details in
Terms and Acronyms in the Supplement section.)
Actual Size
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
11-07
8mm Process Sealed SMT DIP Rotaries
Series ND3
General Specifications
Electrical Capacity (Resistive Load)
Switching Rating:
Nonswitching Rating:
Other Ratings
Contact Resistance:
Insulation Resistance:
Dielectric Strength:
Mechanical Life:
Electrical Life:
Nominal Operating Torque:
Contact Timing:
Materials & Finishes
Actuator:
Housing:
O-ring:
Base:
Movable Contact:
Stationary Contacts:
Terminals:
Environmental Data
Operating Temperature Range:
Humidity:
Vibration:
Shock:
Processing
Soldering:
Cleaning:
Standards & Certifications
Flammability Standards:
UL Recognition
or CSA Certification:
100mA @ 5V DC
100mA @ 50V DC
80 milliohms maximum for circuit; 30 milliohms maximum for contact point
1,000 megohms minimum @ 250V DC
250V AC minimum for 1 minute minimum
20,000 detent operations minimum
20,000 detent operations minimum
Note: A detent operation is one actuator position operation or stepping.
20,000 detent operations = 1,250 cycles for hexadecimal devices or 2,000 cycles for decimal
devices. A cycle is one 360° rotation.
.061 kgf/cm (.846 oz/in)
Nonshorting (break-before-make)
Glass fiber reinforced polyamide
Glass fiber reinforced polyamide (UL94V-0)
Nitrile butadiene rubber
Glass fiber reinforced polyamide (UL94V-0)
Beryllium copper with gold plating
Brass with gold plating
Brass with gold plating)
–25°C through +85°C (–13°F through +185°F)
90 ~ 95% humidity for 100 hours @ 40°C (104°F)
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning
in 1 minute; 3 right angled directions for 2 hours
50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
Reflow Soldering: See Profile B in Supplement section.
Manual Soldering: See Profile B in Supplement section.
Automated cleaning. See Cleaning Specifications in Supplement section.
UL94V-0 rated housing & base
The ND3 Series rotaries have not been tested for UL recognition or CSA certification.
These switches are designed for use in a low-voltage, low-current, logic-level circuit.
When used as intended in a logic-level circuit, the results do not produce hazardous energy.
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
11-07
8mm Process Sealed SMT DIP Rotaries
Series ND3
TYPICAL SWITCH ORDERING EXAMPLE
K
ND3
C
16
B
PACKAGING
R
Tape-Reel
500 Pieces/Reel
No
Code
Partitioned Tray
POSITIONS
ACTUATORS
F
Screwdriver Actuated
10
Decimal
K
Shaft Actuated
16
Hexadecimal
CIRCUITS
TERMINALS
R
Real Coded
(White Actuator)
C
Complement Coded
(Red Actuator)
P
Gull Wing for Upright Mount
B
Gull Wing for Upright with Bracket Mount
H
Gull Wing for Right Angle Mount
DESCRIPTION FOR TYPICAL ORDERING EXAMPLE
ND3KC16B
Complement Coded
Shaft Actuated
Hexadecimal Positions
Gull Wing Terminals for
Upright with Bracket Mount
ACTUATION
10P
12
12
0
8 9
- FC
Actuator colors:
White for real coded
Red for complement coded
ND3
- KC
3 4
6
5 7
ND3
3 4
6
5 7
Actuator colors:
White for real coded
Red for complement coded
Shaft Actuated
0
K
Screwdriver Actuated
8 9
F
10B
Actuators are fully rotational in either direction.
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
11-07
8mm Process Sealed SMT DIP Rotaries
Series ND3
TRUTH TABLES (CIRCUITS & POSITIONS)
Terminal No. (Output)
Actuator Position
x = ON
16
10 Decimal
Hexadecimal
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 A B C D E F
1
R
Real Coded
Model Numbers:
ND3FR, ND3KR
2
4
8
C
1
Complement
Coded
Model Numbers:
ND3FC, ND3KC
2
4
8
TYPICAL SWITCH DIMENSIONS
Screwdriver Actuated • Upright
(0.25) Typ
.010
(2.6) Dia
.102
(0.6)
.024
2
0 1
1
1
C
(1.7) Typ
.067
2
(10.0)
.394
456
78
9
2 3
(7.92)
.312
C
(7.6)
.300
8
C
4
(0.4)
.016
(0.3)
.012
(5.6)
.220
(8.12)
.320
ND3FR10P
4
(0.5) Typ
.020
C
8
(0.7) Typ
.028
(2.54) Typ
.100
(5.08)
.200
Terminal numbers are not on switch.
Shaft Actuated • Upright
(0.25) Typ
.010
(0.6)
.024
EF0 1 2
AB
CD
2
C
1
1
C
(1.7) Typ
.067
2
(10.0)
.394
34 56
78 9
(7.92)
.312
(2.6) Dia
.102
(7.6)
.300
8
C
(3.2)
.126
(8.12)
.320
ND3KC16P
4
4
(0.5) Typ
.020
(0.4)
.016
(0.3)
.012
(5.6)
.220
C
8
(0.7) Typ
.028
(2.54) Typ
.100
(5.08)
.200
Terminal numbers are not on switch.
Screwdriver Actuated • Upright with Bracket
2
0 1
ND3FR10B
(5.6)
.220
Terminal numbers are not on switch.
C
(1.7) Typ
.067
(1.3) Typ
.051
1
1
(5.08)
.200
8
(0.4)
.016
(0.3)
.012
(8.12)
.320
C
(10.0)
.394
456
78
9
2 3
(7.92)
.312
(0.9) Typ
.035
(10.0)
.394
(0.25) Typ
.010
(2.6) Dia
.102
(0.6)
.024
C
2
(7.6)
.300
(1.1) Typ
.043
4
(0.5) Typ
.020
(2.54) Typ
.100
(2.54) Typ
.100
4
C
8
(0.7) Typ
.028
(5.08)
.200
(7.8)
.307
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
11-07
8mm Process Sealed SMT DIP Rotaries
Series ND3
TYPICAL SWITCH DIMENSIONS
Shaft Actuated • Upright with Bracket
(0.25) Typ
.010
(0.6)
.024
(2.6) Dia
.102
AB
CD
EF0 1 2
C
1
(5.08)
.200
789
8
(5.6)
.220
(3.2)
.126
(8.12)
.320
C
ND3KC16B
C
2
(7.6)
.300
(1.1) Typ
.043
4
(0.5) Typ
.020
(2.54) Typ
.100
(0.4)
.016
(0.3)
.012
(1.7) Typ
.067
(1.3) Typ
.051
1
(10.0)
.394
34 56
(7.92)
.312
(0.9) Typ
.035
(10.0)
.394
2
(2.54) Typ
.100
4
C
8
(0.7) Typ
.028
(5.08)
.200
(7.8)
.307
Terminal numbers are not on switch.
Screwdriver Actuated • Right Angle
(2.6) Dia
.102
(0.6)
.024
0 1
1
4
C
8
2
(3.8)
.150
456
78
9
(1.3)
.051
(0.7) Typ
.028
(0.3)
.012
(4.9)
.193
2 3
(8.02)
.316
(1.0)
.039
(0.635) Typ
.025
(0.7) Typ
.028
(1.27) Typ
.050
(8.0)
.315
2 8 C 4 1
(3.8)
.150
(8.12)
.320
(10.0)
.394
(0.4)
.016
(0.5) Typ
.020
(1.27)
.050
(0.5) Typ
.020
(7.9)
.311
(1.3) Typ
.051
(1.8)
.071
(5.7)
.224
(1.27) Typ
.050
ND3FC10H
(0.7)
.028
(1.4)
.055
Terminal numbers are not on switch.
Shaft Actuated • Right Angle
(0.6)
.024
BCD
EF0 1 2
(4.9)
.193
(0.3)
.012
(0.635) Typ
.025
(0.7) Typ
.028
(1.27) Typ
.050
1
4
C
8
2
(3.8)
.150
34 56
78 9A
(8.02)
.316
(1.0)
.039
(2.6) Dia
.102
(1.3)
.051
(0.7) Typ
.028
(8.0)
.315
2 8 C 4 1
(3.8)
.150
(8.12)
.320
(10.0)
.394
ND3KR16H
(0.5) Typ
.020
(1.27)
.050
(3.2)
.126
(0.4)
.016
(0.5) Typ
.020
(7.9)
.311
(1.27) Typ
.050
(1.3) Typ
.051
(1.8)
.071
(0.7)
.028
(1.4)
.055
(5.7)
.224
Terminal numbers are not on switch.
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
11-07
8mm Process Sealed SMT DIP Rotaries
Series ND3
PACKAGING
R
Tape-Reel Packaging
for Upright & Right Angle
Switches must be ordered in
500-piece increments when
tape-reel packaging is selected.
This packaging meets EIA-481-2
Standard for “16mm and 24mm
Embossed Carrier Taping of
Surface Mount Components
for Automatic Handling.”
No
Code
Partitioned Tray
for Upright & Right Angle
Any Quantity
If the ND3 is ordered in less
than 500-piece increments,
the switches are packaged
in a partitioned tray. No
code is required.
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
11-07
Series ND3
8mm Process Sealed SMT DIP Rotaries
PACKAGING (CONTINUED)
For Upright & Upright with Bracket (Codes P & B with F Actuator)
Each tape-reel of 550 pockets contains 500 switches
Minimum Leader Length: 9.05” (230mm) Minimum Trailer Length: 6.30” (160mm)
(1.75)
.069
(16.0) Typ
.630
(4.0) Typ
.157
(10.35) Typ
.4075
(11.5)
.453
(2.0)
.079
5 6
4
(24.4)
.961
(10.6)
.417
01
(21.0) Dia
.827
78
9
(24.0)
.945
Overall Dia (330.0)
13.0
(6.1)
.240
(5.5)
.217
(1.5) Dia Typ
.059
2 3
(78.49) Dia
3.090
(13.0) Dia
.512
(2.0) Typ
.079
(2.0) Typ
.079
(0.5)
.020
Direction of Feed
Reel Dimensions
Tape Dimensions
For Upright & Upright with Bracket (Codes P & B with K Actuator)
Each tape-reel of 530 pockets contains 500 switches
Minimum Leader Length: 9.05” (230mm) Minimum Trailer Length: 6.30” (160mm)
(1.75)
.069
(78.49) Dia
3.090
(4.0) Typ
.157
(10.35) Typ
.4075
(16.0) Typ
.630
(11.5)
.453
(24.0)
.945
(21.0) Dia
.827
(2.0)
.079
(24.4)
.961
E F 01 2
34 56
BC D
Overall Dia (330.0)
13.0
(9.3)
.366
(8.6)
.339
(1.5) Dia Typ
.059
(10.6)
.417
78 9A
(13.0) Dia
.512
(2.0) Typ
.079
(2.0) Typ
.079
(0.5)
.020
Direction of Feed
Reel Dimensions
Tape Dimensions
For Right Angle (Code H with F or K Actuator)
Each tape-reel of 550 pockets contains 500 switches
Minimum Leader Length: 9.05” (230mm) Minimum Trailer Length: 6.30” (160mm)
(4.0) Typ
.157
(1.75)
.069
(78.49) Dia
3.090
(13.0) Dia
.512
(2.0) Typ
.079
(16.0) Typ
.630
(2.0) Typ
.079
(10.9) Typ
.429
(1.5) Dia Typ
.059
(11.5)
.453
(10.7)
.421
(24.0)
.945
Overall Dia (330.0)
13.0
(21.0) Dia
.827
(2.0)
.079
(24.4)
.961
Reel Dimensions
(8.7)
.343
(8.1)
.319
(6.3) Typ
.248
(0.5)
.020
Direction of Feed
Tape Dimensions
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
11-07
Similar pages