Newhaven NHD-24064CZ-FSW-GBW Graphic liquid crystal display module Datasheet

NHD‐24064CZ‐FSW‐GBW
Graphic Liquid Crystal Display Module
NHD‐
24064‐
CZ‐
F‐
SW‐
G‐
B‐
W‐
Newhaven Display
240 x 64 pixels
Model
Transflective
Side White LED Backlight
STN ‐ Gray
6:00 view
Wide Temperature (‐20°C ~ +70°C)
RoHS Compliant
Newhaven Display International, Inc.
2511 Technology Drive, Suite 101
Elgin IL, 60124
Ph: 847‐844‐8795
Fax: 847‐844‐8796
www.newhavendisplay.com
[email protected]
[email protected]
[1]
Document Revision History
Revision
0
1
2
3
4
Date
2/29/2008
7/20/2009
12/4/2009
4/15/2010
5/5/2010
Description
Initial Release
User guide reformat
Pin Description Revised
Updates
Electrical updated
Functions and Features
•
•
•
•
•
240 x 64 pixels
Built‐in RA6963 controller
+5.0V Power Supply
1/64 duty, 1/9 bias
RoHS Compliant
[2]
Changed by
‐
BE
BE
BE
BE
Mechanical Drawing
[3]
Pin Description and Wiring Diagram
Pin No.
1
2
3
4
5
6
7
8
9
10
11~18
19
20
Symbol
FGND
VSS
VDD
V0
/WR
/RD
/CE
C/D
VEE
RES
DBO~DB7
FS
LED+
External
Connection
Power Supply
Power Supply
Power Supply
Adj. Power Supply
MPU
MPU
MPU
MPU
Power Supply
MPU
MPU
MPU
Power Supply
Function Description
Frame Ground
Ground
Power supply for logic (+5.0V)
Power Supply for contrast (approx ‐8.5)
Active LOW Write signal
Active LOW Read signal
Active LOW chip enable
Register select signal C/D=0: DATA C/D=1: COMMAND
Negative voltage output (‐10V)
Active LOW reset signal
Bi‐directional 8‐bit data bus
Font Select: 1=6x8 fonts, 0=8x8 fonts
Power supply for LED Backlight (+5.0V via 6.8Ω on‐board resistor)
Recommended LCD connector: 2.54mm pitch pins
Backlight connector: Anode at Pin 20 of LCD connector Mates with: ‐
[4]
Electrical Characteristics
Item
Operating Temperature Range
Storage Temperature Range
Supply Voltage
Supply Current
Supply for LCD (contrast)
“H” Level input
“L” Level input
“H” Level output
“L” Level output
Backlight Supply Voltage
Backlight Supply Current
Symbol
Top
Tst
VDD
IDD
VDD‐V0
VIH
VIL
VOH
VOL
Vled
Iled
Condition
Absolute Max
Absolute Max
VDD=5.0V, Ta=25°C
Ta=25°C
Min.
‐20
‐30
4.5
‐
‐
2.2
0
2.4
‐
Typ.
‐
‐
5.0
7.0
13.5
‐
‐
‐
‐
Max.
+70
+80
5.5
‐
‐
VDD
0.6
‐
0.4
Unit
⁰C
⁰C
V
mA
V
V
V
V
V
‐
Vled=5.0V
‐
‐
5.0
40
‐
‐
V
mA
Optical Characteristics
Item
Viewing Angle ‐ Vertical
Viewing Angle ‐ Vertical
Viewing Angle – Horizontal
Viewing Angle ‐ Horizontal
Contrast Ratio
Response Time (rise)
Response Time (fall)
Symbol
AV
AV
AH
AH
Cr
Tr
Tf
Condition
Cr ≥ 2
Cr ≥ 2
Cr ≥ 2
Cr ≥ 2
‐
‐
Min.
‐
‐
‐
‐
‐
‐
‐
Typ.
35
60
40
40
6
150
150
Max.
‐
‐
‐
‐
‐
250
250
Unit
⁰
⁰
⁰
⁰
‐
ms
ms
Controller Information
Built‐in RA6963. Download specification at http://www.newhavendisplay.com/app_notes/RA6963.pdf
[5]
Table of Commands
[6]
Timing Characteristics
[7]
Example Initialization Program
void command(int A)
{
P1 = A;
ID = 1;
CE = 0;
WRT = 0;
WRT = 1;
CE = 1;
}
void data(int A)
{
P1 = A;
ID = 0;
CE = 0;
WRT = 0;
WRT = 1;
CE = 1;
}
void init()
{
RST = 1;
RDD = 1;
F_S = 1;
data(0x00);
data(0x00);
commnd(0x40);
data(0x00);
data(0x40);
command(0x42);
data(0x1E);
data(0x00);
command(0x41);
data(0x1E);
data(0x00);
command(0x43);
command(0x80);
}
//Command
//Data
//Set Text Home Address
//Low Address Columns
//High Address
//Set Graphic Home Address
//Low Address Columns
//High Address
//Set Text Area
//Low Address Columns
//High Address
//Set Graphic Areaa
//Mode Set to 'OR' mode
[8]
Quality Information
Test Item
Content of Test
High Temperature storage
Endurance test applying the high
storage temperature for a long time.
Endurance test applying the low storage
temperature for a long time.
Endurance test applying the electric stress
(voltage & current) and the high thermal
stress for a long time.
Endurance test applying the electric stress
(voltage & current) and the low thermal
stress for a long time.
Endurance test applying the electric stress
(voltage & current) and the high thermal
with high humidity stress for a long time.
Endurance test applying the electric stress
(voltage & current) during a cycle of low
and high thermal stress.
Endurance test applying vibration to
simulate transportation and use.
Low Temperature storage
High Temperature
Operation
Low Temperature
Operation
High Temperature /
Humidity Operation
Thermal Shock resistance
Vibration test
Static electricity test
Test Condition
Endurance test applying electric static
discharge.
2
‐30⁰C , 200hrs
1,2
+70⁰C 200hrs
2
‐20⁰C , 200hrs
1,2
+60⁰C , 90% RH , 96hrs
1,2
‐20⁰C,30min ‐> 25⁰C,5min ‐>
70⁰C,30min = 1 cycle
10 cycles
10‐55Hz , 15mm amplitude.
60 sec in each of 3 directions
X,Y,Z
For 15 minutes
VS=800V, RS=1.5kΩ, CS=100pF
One time
Note 1: No condensation to be observed.
Note 2: Conducted after 4 hours of storage at 25⁰C, 0%RH.
Note 3: Test performed on product itself, not inside a container.
Precautions for using LCDs/LCMs
See Precautions at www.newhavendisplay.com/specs/precautions.pdf
Warranty Information and Terms & Conditions
http://www.newhavendisplay.com/index.php?main_page=terms
[9]
Note
+80⁰C , 200hrs
3
Similar pages