NI NIPXI-6542 100 mhz logic analyzer/digital pattern generator Datasheet

100 MHz Logic Analyzer/Digital Pattern Generators
NI 6542 Bundles, NI 6552 Bundles
• 100 MHz maximum timing and state
clock rate (10 ns)
• 20 to 32 bidirectional data channels per
module (up to 544 channels per system)
• 4 general-purpose I/O channels and
2 clock channels per module
• 8 Mb/channel onboard memory
(32 MB total)
• Multiple trigger modes including
capturing numerous waveforms on a
single trigger condition, match on
pattern, and edge
• Pattern generation and logic analysis
connectivity provided by shielded
flying-lead cable
• NI 6552 bundles offer per-cycle tristate
and real-time hardware comparison
Operating Systems
• Windows 2000/NT/XP
Recommended Software
• LabVIEW
• LabWindows/CVI
Software (included)
•
•
•
•
•
NI-HSDIO driver
SignalExpress 1.1
Digital Waveform Editor
LabVIEW Express VIs
Script Editor
Overview
NI 6542 Bundles
Bus
National Instruments logic analyzer and pattern generator bundles give
you the ability to meet the analysis and generation needs of designing,
testing, and debugging digital ICs and electronics. The bundles combine
National Instruments SignalExpress, interactive software that aids in
building programming-free applications, with NI 6542 or NI 6552 100 MHz
digital waveform generator/analyzers. The high-quality flying-lead cable
provides a 50 Ω signal and ground connection all the way to your device
under test (DUT). Each signal and ground pair connects to standard 0.1 in.
headers and the included grabber clips. At a considerable discount,
these bundles provide flexible, powerful hardware and software features
ideal for design and test engineers searching for a low-profile instrument
for complex pattern generation, analysis of timing and state behavior,
and report generation.
Choose Your Logic Analyzer Bundle
There are two different bundles to choose from, with each available for
both PCI and PXI. The NI 6542 bundles, which provide 32 channels
compatible with 5.0, 3.3, 2.5, and 1.8 V logic, are designed to drive inputs
or acquire outputs from a circuit or system. If you need flexible voltage
levels (-2.0 to 5.5 V in 10 mV steps), per-cycle control over the direction of
a line for stimulus-response applications, and the ability to passively probe
a circuit using with low loading, choose the NI 6552 bundles.
Max state and timing rate
Channels
Voltage levels
100 MHz
32
20
5, 3.3, 2.5, or 1.8 V compatible
-2.0 to 5.5 V in 10 mV steps
Memory
8 Mb/ch (32 MB)
Connectivity
Software
Flying-lead cable
SignalExpress, Digital Waveform Editor
Stimulus-response features
–
Low load probing
–
Price
NI 6552 Bundles
PXI or PCI
$7,699
3
3
$9,599
Features
Logic Analyzer
NI 6542 and NI 6552 bundles provide 100 MHz clock rates for analyzing
the timing and state information of a wide range of digital electronics.
The diverse triggering options coupled with the deep memory of the digital
instrument means that you can be certain to capture enough data to
thoroughly analyze and debug your device. With the multirecord triggering,
you can capture data around recurring events without developing
complex sequential triggering or rearming the logic analyzer. NI 6552
bundles offer programmable voltage levels in 10 mV steps, making them
ideal for analyzing a wide range of logic families and for using the device
with the supplied 10:1 passive attenuators.
100 MHz Logic Analyzer/Digital Pattern Generators
Pattern Generator
External Control
On a per-channel basis, you can programmatically configure channels to
drive data to your DUT through the same flying-lead cable. You can use
any set of channels for pattern generation at the same time you use
another set of channels to acquire data. NI 6552 bundles are capable of
switching between generation and analysis on a per-cycle basis. The
digital instruments have 32 MB of onboard memory for the acquired data
and a separate 32 MB of memory to store complex patterns for generation.
The NI Digital Waveform Editor provides an interactive tool for creating,
editing, and importing digital patterns. Once created, a pattern can be
configured to be output to your DUT with a single step in NI SignalExpress.
The digital waveform generator/analyzers included in the NI 6542 and
NI 6552 bundles offer a number of options for controlling the generation
and acquisition capabilities with external signals. Along with the ability to
import a sample clock or export the internal clock, four general-purpose
I/O lines are available for receiving external triggers or for generating
events, such as the Data Active Event, for handshaking with the DUT.
Using triggers and the linking and looping (scripting) features of the
board, you can dynamically control the waveforms generated and the
length of generation.
Mixed-Signal System in SignalExpress
SignalExpress not only includes digital analysis, acquisition, and
generation capabilities, but it also provides a range of instrument control
options for integrating other PCI, PXI, or stand-alone instruments into
a single system. You can program the complete system using the
interactive steps in SignalExpress. The shared architecture between the
digital instruments and many of the NI digitizers and arbitrary waveform
generators makes it easy to create a synchronized mixed-signal system.
NI SignalExpress Comparing Digital Waveforms
Data Analysis and Logging
The PC-based implementation means that, unlike traditional logic analyzers,
the full power of the computer is readily available to perform complex
analysis, data logging, and report generation. With SignalExpress, you can
easily export the captured data to file and save images of the captured
waveforms for easy report generation. Using National Instruments
LabVIEW, you can create custom analysis steps to plug into SignalExpress
to best match application needs.
Ordering Information
NI PCI-6542 Bundle
NI PCI-6552 Bundle
NI PXI-6542 Bundle
NI PXI-6552 Bundle
..............................................................779635-01
..............................................................779637-01
..............................................................779634-01
..............................................................779636-01
Stimulus Response
Cable
The generation and acquisition capabilities of these instruments make
them ideal for stimulus-response applications. NI 6542 bundles can drive
data on one set of channels while simultaneously analyzing the response
data on the remaining channels. NI 6552 bundles offer more advanced
features, including per-cycle tristate and real-time hardware comparison.
With per-cycle tristate, you can switch from analyzing data to generating
data on a per-channel, per-clock-cycle basis. Real-time hardware
comparison checks the acquired data against the known expected
response for errors at the full clock rate of the digital instrument.
SHC68-C68-D2 shielded cable ..............................................188142-01
Other Accessories
CB-2162 connector block and prototyping board..................778592-01
SMB-2163 breakout accessory ............................................778747-01
BUY NOW!
For complete product specifications, pricing, and accessory
information, call (800) 813 3693 (U.S.) or go to ni.com/digitalio.
BUY ONLINE at ni.com or CALL (800) 813 3693 (U.S.)
2
NI Services and Support
SERVICE
NEEDS
NI has the services and support to meet
your needs around the globe and through
the application life cycle – from planning
and development through deployment
and ongoing maintenance. We offer
services and service levels to meet
customer requirements in research,
design, validation, and manufacturing.
Visit ni.com/services.
Training and Certification
NI training is the fastest, most certain route to productivity with our
products. NI training can shorten your learning curve, save development
time, and reduce maintenance costs over the application life cycle. We
schedule instructor-led courses in cities worldwide, or we can hold a
course at your facility. We also offer a professional certification program
that identifies individuals who have high levels of skill and knowledge on
using NI products. Visit ni.com/training.
Professional Services
Our Professional Services Team is comprised of NI applications engineers,
NI Consulting Services, and a worldwide National Instruments Alliance
Partner program of more than 600 independent consultants and
integrators. Services range from
start-up assistance to turnkey
system integration.
Visit ni.com/alliance.
OEM Support
We offer design-in consulting and product integration assistance if you
want to use our products for OEM applications. For information about
special pricing and services for OEM customers, visit ni.com/oem.
ni.com • (800) 813 3693
National Instruments • [email protected]
Local Sales and Technical Support
In offices worldwide, our staff is local to the country, giving you access
to engineers who speak your language. NI delivers industry-leading
technical support through online knowledge bases, our applications
engineers, and access to 14,000 measurement and automation
professionals within NI Developer Exchange forums. Find immediate
answers to your questions at ni.com/support.
We also offer service programs that provide automatic upgrades to
your application development environment and higher levels of technical
support. Visit ni.com/ssp.
Hardware Services
NI Factory Installation Services
NI Factory Installation Services (FIS) is the fastest and easiest way to
use your PXI or PXI/SCXI combination systems right out of the box.
Trained NI technicians install the software and hardware and configure
the system to your specifications. NI extends the standard warranty by
one year on hardware components (controllers, chassis, modules)
purchased with FIS. To use FIS, simply configure your system online with
ni.com/pxiadvisor.
Calibration Services
NI recognizes the need to maintain properly calibrated devices for
high-accuracy measurements. We provide manual calibration
procedures, services to recalibrate your products, and automated
calibration software specifically designed for use by metrology
laboratories. Visit ni.com/calibration.
Repair and Extended Warranty
NI provides complete repair services for our products. Express repair
and advance replacement services are also available. We offer
extended warranties to help you meet project life-cycle requirements.
Visit ni.com/services.
*342568A-01*
342568A-01
2005-6444-101-D
© 2006 National Instruments Corporation. All rights reserved. CVI, LabVIEW, National Instruments, National Instruments Alliance Partner, NI, ni.com, SCXI, and SignalExpress are
trademarks of National Instruments. Other product and company names listed are trademarks or trade names of their respective companies.
A National Instruments Alliance Partner is a business entity independent from NI and has no agency, partnership, or joint-venture relationship with NI.
Similar pages