NI NIUSB-4065 Low-cost 6 1⁄2-digit multimeter Datasheet

Low-Cost 61⁄2-Digit Multimeters
NI PXI-4065, NI PCI-4065, NI PCIe-4065,
NI USB-4065 NEW!
• Basic 6 1⁄2-digit digital multimeters
(DMMs) for PXI, PCI, PCI Express,
and USB
• 7 built-in measurement modes –
AC/DC voltage, AC/DC current, 2- or
4-wire resistance, and diode test
• ±300 VDC/Vrms isolation
• 10 readings/s maximum at 61⁄2 digits
• Ideally suited for OEMs, educational
labs, and production test
For increased accuracy, resolution,
measurement speed, and functionality,
consider NI 407x FlexDMM devices.
1PXI-4065
only
Operating Systems
• Windows Vista/XP/2000
Recommended Software
•
•
•
•
•
LabVIEW
LabVIEW Real-Time Module1
LabWindows™/CVI
Measurement Studio
LabVIEW SignalExpress
Other Compatible Software
• Microsoft Visual Basic
• C/C++
Driver Software (included)
• NI-DMM
• NI-DMM Soft Front Panel
• DMM/Switch Express VI
Overview
National Instruments 4065 devices are low-cost 6 1⁄2-digit PXI, PCI,
PCI Express, and USB DMMs for the measurement of voltage, current,
and resistance, or for diode test. They are ideally suited for OEMs,
educational laboratories, or other cost-conscious test and measurement
facilities. With ±300 VDC/Vrms of isolation, current measurements up to
3 A, and 2- or 4-wire resistance measurements, NI 4065 DMMs provide
a complete multimeter solution for basic 6 1⁄2-digit measurement needs.
For higher-performance requirements, consider using NI 407x PCI
and PXI FlexDMM devices. They combine industry-leading accuracy and
resolution at 6 1⁄2 and 7 1⁄2 digits with 1.8 MS/s digitizer capability for faster
sampling rates in production test environments.
Flexible Software Improves Usability
You can program NI 4065 DMMs through a standard application
programming interface (API) in NI LabVIEW and LabWindows/CVI or
Microsoft programming languages. For simple benchtop measurements,
the NI-DMM Soft Front Panel provides the common display and interface
found on traditional DMMs to make simple measurements quickly and
easily. When combined with switches, the DMM/Switch Express VI can
rapidly develop a high-channel-count data-logging system with a single
function call in LabVIEW. In LabVIEW SignalExpress, the DMM/Switch
Express VI sets up a live data logger without any programming.
Efficient Mixture of Accuracy, Resolution,
and Speed
NI 4065 DMMs offer 6 1⁄2 digits of resolution at up to 10 readings/s and
up to 3000 readings/s at lower resolutions. By trading off speed for
resolution, you can maximize measurement quality and throughput.
NI 4065 DMMs also offer comparable accuracy over a 24-hour cycle
or one year of an external calibration to other GPIB, LAN, or USB-based
Digits
61⁄2
51⁄2
41⁄2
Resolution (bits)
22
18
15
Reading Rate (S/s)
10
1500
3000
Table 1. NI 4065 Reading Rates versus Resolution
6 1⁄2-digit DMMs on the market. With an NI 4065, there is no need to
sacrifice basic measurement quality for a low selling price.
For higher resolution, accuracy, or speed, consider using one of the
NI 407x 6 1⁄2-digit FlexDMM devices. The PCI-4070 can accurately measure
100 readings/s at 61⁄2 digits with 31 ppm of DC voltage accuracy over a
two-year period. This represents a 3X improvement over the NI 4065
DMMs for accuracy and noise. The PXI-4071 is also available with
measurements at 7 1⁄2 digits up to 1000 V. For more information on the
complete line of National Instruments DMMs, visit ni.com/multimeters.
Low-Cost 6 1⁄2-Digit Multimeters
Integration with Switching
NI PXI-4065
You can easily combine the NI PXI-4065 DMM with NI PXI switches in the
low-cost NI PXI-1033 integrated chassis and controller to create highchannel-count, 6 1⁄2-digit data-logging systems with up to 588 channels.
You can configure these systems, controllable from any PCI Express or
ExpressCard slot on a PC or laptop computer, with more than 100
available PXI switch topologies. For further system expansion, you can
add more than 3,000 channels with each additional 18-slot PXI chassis.
Figure 3. Use the USB-4065 with USB-controlled switching for a complete
DMM/switch solution.
Ordering Information
Figure 1. Expand channel count with PXI switching.
NI USB-4065, PCI-4065 and PCIe-4065
You can integrate NI 4065 DMMs with stand-alone switching using the
4- or 12-slot USB Switch Mainframes from National Instruments. You can
configure these switch systems, controllable from any available USB port
on a PC or laptop computer, with more than 50 available SCXI switch
topologies. For existing SCXI switch systems, the NI 4065 DMMs can also
provide control via the AUX connector on the front of the DMM. Switching
offers a simple method of channel expansion for data-logging systems
based on an NI 4065.
NI PXI-4065............................................................................780011-01
NI PCI-4065............................................................................779770-01
NI PCIe-4065..........................................................................779771-01
NI USB-4065 ..........................................................................780152-01
Includes the standard P-1 probe set and NI-DMM software.
Accessories for PXI
NI PXI-1033 (chassis and integrated MXI Express controller,
1 PXI Express port, 3 m cable) ..............................................779756-01
NI PXI-2527 (300 V, 64-channel multiplexer) ........................778572-27
Accessories for USB, PCI, and PCI Express
NI USB Switch Mainframe (4-slot) ......................................778570-01
NI SCXI-1127 (300 V, 64-channel multiplexer)......................776572-27
General Accessories
P-1 Probe Set (standard)........................................................761000-01
P-2 Probe Set (additional connectors) ..................................184698-01
P-3 Probe Set (banana plug to bare wire) ............................185692-01
CSM-10 A (10 A current shunt) ............................................777488-02
BUY NOW!
For complete product specifications, pricing, and accessory
information, call 800 813 3693 (U.S.) or go to ni.com/multimeters.
Figure 2. Expand channel count with USB-controlled switching.
BUY ONLINE at ni.com or CALL 800 813 3693 (U.S.)
2
Low-Cost 6 1⁄2-Digit Multimeters
Specifications
DC Specifications
Aperture Time (NPLC)
100
10
6
2
1
0.06
0.04
0.02
Reading Rate1 (S/s)
0.6 (0.5)
6 (5)
10 (8.33)
30 (25)
60 (50)
900
1,500
3,000
Resolution (Digits)
61⁄2
51⁄2
41⁄2
RMS Noise2 (ppm of range)
0.06
0.2
0.25
0.4
0.55
1.7
2.5
11.5
1 Specified
2
for 60 Hz and (50 Hz) operation
Measured on the 10 V range
DC Voltage ± (ppm of reading + ppm of range)1
Range
100 mV3
1V
10 V
100 V
300 V
Resolution
100 nV
1 µV
10 µV
100 µV
1 mV
Input Resistance4
>10 GΩ, 10 MΩ
>10 GΩ, 10 MΩ
>10 GΩ, 10 MΩ
10 MΩ
10 MΩ
24-Hour2, Tcal ±1 °C
30 + 30
20 + 6
15 + 5
20 + 6
20 + 20
90-Day, Tcal ±5 °C
65 + 35
65 + 7
65 + 6
75 + 7
75 + 20
1-Year, Tcal ±5 °C
90 + 35
90 + 7
90 + 6
110 + 7
110 + 20
Tempco (0 to 55 °C)
5+2
5 + 0.2
5 + 0.2
6 + 0.2
6 + 0.5
90-Day, Tcal ±5 °C
300 + 200
300 + 50
800 + 100
12001 + 200
1-Year, Tcal ±5 °C
500 + 200
500 + 50
1000 + 100
12001 + 200
Tempco (0 to 55 °C)
30 + 20
30 + 5
65 + 10
65 + 20
90-Day, Tcal ±5 °C
95 + 40
95 + 10
95 + 10
95 + 10
110 + 12
400 + 12
6000 + 40
1-Year, Tcal ±5 °C
110 + 40
110 + 10
110 + 10
110 + 10
125 + 12
500 + 12
8000 + 40
Tempco (0 to 55 °C)
8+3
8+1
8+1
8+1
10 + 1
30 + 2
400 + 4
1ppm
(part per million) = 0.0001%
to external calibration source
offset nulling
4Default input resistance is 10 MΩ
Tcal = temperature at which last external calibration was performed NI factory calibration is 23 ˚C ± 1 ˚C
Tempco = temperature coefficient
2Relative
3With
DC Current ± (ppm of reading + ppm of range)
Range
10 mA
100 mA
1A
3A
1Add
Resolution
10 nA
100 nA
1 µA
3 µA
Burden Voltage (typical)
<60 mV
<0.6 V
<0.35 V
<1 V
24-Hour2, Tcal ±1 °C
50 + 100
100 + 40
500 + 60
10001 + 200
650 ppm/A of reading for currents above 1.5 A
to external calibration source
2Relative
Resistance (4- and 2-Wire) ± (ppm of reading + ppm of range)
Range
100 Ω
1 kΩ
10 kΩ
100 kΩ
1 MΩ
10 MΩ
100 MΩ
Resolution
100 µΩ
1 mΩ
10 mΩ
100 mΩ
1Ω
10 Ω
100 Ω
Test Current
1 mA
1 mA
100 µA
10 µA
5 µA
500 nA
500 nA || 10 MΩ
24-Hour1, Tcal ±1 °C
30 + 30
20 + 6
20 + 6
20 + 6
20 + 10
150 + 10
2000 + 20
1Relative to external calibration source
Specifications are for 4-wire measurements. For 2-wire measurements, perform offset nulling or add 200 mΩ to reading.
Diode Test1
Range
10 V
1Can
Resolution
10 µV
Test Current
100 µA, 1 mA
Accuracy
Add 50 ppm of reading and 50 ppm of range to 10 VDC voltage specifications.
be used to test p-n junctions, LEDs, or zener diodes up to 10 V.=
BUY ONLINE at ni.com or CALL 800 813 3693 (U.S.)
3
Low-Cost 6 1⁄2-Digit Multimeters
DC Functions General Specifications
Effective common-mode rejection ratio (CMRR)
(1 kΩ resistance in LO lead).................................................. >150 dB (DC, 50 and 60 Hz ± 1%) with second-order DC noise rejection,
10 PLC aperture
Maximum 4-wire lead resistance.......................................... Use the lesser of 10% of range or 1 kΩ
Overrange............................................................................... 105% of range except 300 V and 3 A range
DC voltage input bias current................................................ <40 pA at 23 °C (typical)
AC Specifications
Digits
61⁄2
51⁄2
41⁄2
Desired Bandwidth
10 Hz to 100 kHz
100 Hz to 100 kHz
500 Hz to 100 kHz
Recommended Reading Rate
1 S/s
10 S/s
100 S/s
AC Voltage ± (% of reading + % of range)
Range (Peak Voltage)
200 mV (±320 mV)
2 V (±3.2 V)
20 V (±32 V)
300 V (±425 V)
24-Hour, Tcal ±1 °C
1.5 + 0.04
0.2 + 0.04
0.3 + 0.04
1.5 + 0.08
90-Day, Tcal ±5 °C
2 + 0.05
0.2 + 0.05
0.3 + 0.05
1.5 + 0.08
1-Year, Tcal ±5 °C
2 + 0.05
0.2 + 0.05
0.3 + 0.05
1.5 + 0.08
Tempco (0 to 55 ˚C)
0.01 + 0.003
0.005 + 0.003
0.01 + 0.003
0.02 + 0.005
Frequency
10 to 40 Hz
24-Hour, Tcal ±1 °C
1.6 + 0.05
90-Day, Tcal ±5 °C
2.1 + 0.05
1-Year, Tcal ±5 °C
2.1 + 0.05
Tempco (0 to 55 ˚C)
0.015 + 0.03
>40 Hz to 5 kHz
0.3 + 0.05
0.3 + 0.06
0.3 + 0.06
0.015 + 0.03
Frequency
10 to 40 Hz
>40 Hz to 20 kHz
>20 to 50 kHz
>50 to 100 kHz
Tempco = temperature coefficient
AC Current ± (% of reading + % of range)
Range (Peak Current)
10 mA (±15 mA)
100 mA (±150 mA)
500 mA (±750 mA)
3 A (±4.2 A)
Tempco = temperature coefficient
High Crest Factor Additional Error1
Crest Factor
1 to 3
3 to 4
4 to 5
Additional Error (% of reading)
0.05%
0.1%
1%2
1Applicable
2For
for non-sine wave signals up to the rated peak voltage/current or bandwidth
frequencies above 2 kHz
AC Functions General Specifications
Input impedance ....................................................................
Input coupling ........................................................................
Maximum volt-hertz product .................................................
Maximum DC voltage component .........................................
CMRR (1 kΩ resistance in LO lead) ......................................
Overrange...............................................................................
10 MΩ in parallel with 200 pF
AC coupling
>3 x 107 V-Hz
250 V
>70 dB (DC to 60 Hz)
105% of range except 300 V, 3 A range
General Specifications
External calibration interval ..................................................
Input protection
Resistance, diode ..............................................................
DC V, AC V .........................................................................
DC I and AC I .....................................................................
1 year recommended
Up to 300 VDC
Up to 300 VDC, 300 Vrms, 450 Vp
F 3.15 A 250 V fast-acting fuse, user-replaceable
BUY ONLINE at ni.com or CALL 800 813 3693 (U.S.)
4
Low-Cost 6 1⁄2-Digit Multimeters
Maximum common-mode voltage......................................... 300 VDC or Vrms
Input terminals....................................................................... Gold-plated low-thermal emf solid copper
Dimensions ............................................................................ PXI: 3U, 1 slot, PXI/CompactPCI module; 21.6 by 2.0 by 13.0 cm (8.5 by 0.8 by 5.1 in.)
PCI/PCI Express: 1 slot, PCI or PCI Express board; 18.3 by 12 cm (7.2 by 4.72 in.)
USB: 17.8 by 10.4 by 3.3 cm (7.0 by 4.1 by 1.3 in.)
Operating temperature .......................................................... PXI: 0 to 55 °C; PCI/PCI Express: 0 to 40 °C; USB: 0 to 45°C
Storage temperature.............................................................. -40 to 70 °C
Relative humidity ................................................................... Up to 95% at 40 °C
Measurement category.......................................................... CAT II
Pollution degree..................................................................... 2
Approved at altitudes ............................................................ Up to 2000 m
Safety
An NI 4065 meets the requirements of the following standards of safety and electrical equipment for measurement, control, and laboratory use:
• IEC 61010-1, EN 61010-1
• UL 61010-1, CSA 61010-1
Note: For UL and other safety certifications, refer to the product label, or visit ni.com/certification, search by model number or product line,
and click the appropriate link in the Certification column.
Electromagnetic Compatibility
This product is designed to meet the requirements of the following standards of EMC for electrical equipment for measurement, control,
and laboratory use:
• EN 61326 EMC requirements; Minimum Immunity
• EN 55011 Emissions; Group 1, Class A
• CE, C-Tick, ICES, and FCC Part 15 Emissions; Class A
Note: For EMC compliance, operate this device according to product documentation.
CE Compliance
This product meets the essential requirements of applicable European Directives, as amended for CE marking, as follows:
• 2006/95/EC; Low-Voltage Directive (safety)
• 2004/108/EC; Electromagnetic Compatibility Directive (EMC)
Note: Refer to the Declaration of Conformity (DoC) for this product for any additional regulatory compliance information. To obtain the DoC for this
product, visit ni.com/certification, search by model number or product line, and click the appropriate link in the Certification column.
Waste Electrical and Electronic Equipment (WEEE)
EU Customers: At the end of their life cycle, all products must be sent to a WEEE recycling center. For more information about WEEE recycling
centers and National Instruments WEEE initiatives, visit ni.com/environment/weee.htm.
BUY ONLINE at ni.com or CALL 800 813 3693 (U.S.)
5
IN
TA
PL
AN
MA
IN
NI Services and Support
P
DE
LO
Y
EL
OP
SERVICE
NEEDS
V
DE
NI has the services and support to meet
your needs around the globe and through
the application life cycle – from planning
and development through deployment
and ongoing maintenance. We offer
services and service levels to meet
customer requirements in research,
design, validation, and manufacturing.
Visit ni.com/services.
Training and Certification
NI training is the fastest, most certain route to productivity with our
products. NI training can shorten your learning curve, save development
time, and reduce maintenance costs over the application life cycle. We
schedule instructor-led courses in cities worldwide, or we can hold a
course at your facility. We also offer a professional certification program
that identifies individuals who have high levels of skill and knowledge on
using NI products. Visit ni.com/training.
Professional Services
Our Professional Services Team is composed of NI applications engineers,
NI Consulting Services, and a worldwide National Instruments Alliance
Partner program of more than 600 independent consultants and
integrators. Services range from
start-up assistance to turnkey
system integration.
Visit ni.com/alliance.
OEM Support
We offer design-in consulting and product integration assistance if you
want to use our products for OEM applications. For information about
special pricing and services for OEM customers, visit ni.com/oem.
ni.com • 800 813 3693
National Instruments • [email protected]
Local Sales and Technical Support
In offices worldwide, our staff is local to the country, giving you access
to engineers who speak your language. NI delivers industry-leading
technical support through online knowledge bases, our applications
engineers, and access to 14,000 measurement and automation
professionals within NI Developer Exchange forums. Find immediate
answers to your questions at ni.com/support.
We also offer service programs that provide automatic upgrades to
your application development environment and higher levels of technical
support. Visit ni.com/ssp.
Hardware Services
NI Factory Installation Services
NI Factory Installation Services (FIS) is the fastest and easiest way to
use your PXI or PXI/SCXI combination systems right out of the box.
Trained NI technicians install the software and hardware and configure
the system to your specifications. NI extends the standard warranty by
one year on hardware components (controllers, chassis, modules)
purchased with FIS. To use FIS, simply configure your system online
with ni.com/pxiadvisor.
Calibration Services
NI recognizes the need to maintain properly calibrated devices for
high-accuracy measurements. We provide manual calibration
procedures, services to recalibrate your products, and automated
calibration software specifically designed for use by metrology
laboratories. Visit ni.com/calibration.
Repair and Extended Warranty
NI provides complete repair services for our products. Express repair
and advance replacement services are also available. We offer
extended warranties to help you meet project life-cycle requirements.
Visit ni.com/services.
*351556A-01*
351556A-01
2007-8778-101-D
© 2008 National Instruments Corporation. All rights reserved. CVI, FlexDMM, LabVIEW, Measurement Studio, MXI, National Instruments, National Instruments Alliance Partner, NI, ni.com, SCXI,
and SignalExpress are trademarks of National Instruments. The mark LabWindows is used under a license from Microsoft Corporation. Other product and company names listed are trademarks or
trade names of their respective companies. A National Instruments Alliance Partner is a business entity independent from NI and has no agency, partnership, or joint-venture relationship with NI.
Similar pages