NJRC NJU3101D

NJU3101
n TERMINAL DESCRIPTION
No. SYMBOL
1
PA0
2
PA1
3
PA2
4
PA3
INPUT/OUTPUT
INPUT/OUTPUT
INPUT/OUTPUT
INPUT/OUTPUT
INPUT/OUTPUT
FUNCTION
4-bit Input / Output PORTA.
Selects a terminal circuit for PORT grouped with 4 lines from
follows by the mask option.
· C-MOS Input Terminal with Pull-up Resistance(IA)
· C-MOS Input Terminal(IC)
· C-MOS Output Terminal(OB)
Maker Testing Terminal with Pull-down Resistance
5
TEST
INPUT
The terminal is recommended to connect to GND.
Internal
Oscillator Terminals.
6
OSC1
INPUT
Connects
a device selected from the ceramic or the crystal
7
OSC2
OUTPUT
resonator, or the resistor, to these terminals for the internal
oscillator.
In the external clock operation, OSC1 is the external clock
input terminal and OSC2 is normally open terminal.
VSS
–
Power Source (0V)
8
9
INPUT
RESET
Terminal.
RESET
When the low level input-signal, the system is initialized.
10
PB0
INPUT/OUTPUT
1-bit Input / Output PORTB and PORTC.
Selects a terminal circuit for each PORT from follows by the
11
PC0
INPUT/OUTPUT
mask option.
· C-MOS Input Terminal with Pull-up Resistance(IA)
· C-MOS Input Terminal(IC)
· Nch-FET Open-Drain Output Terminal with Pull-up
Resistance(OA)
· Nch-FET Open-Drain Output Terminal(OC)
12
PD0
INPUT/OUTPUT
2-bit Input / Output PORTD.
Selects a terminal circuit for PORT grouped with 2 lines from
13
PD1
follows by the mask option.
· C-MOS Input Terminal with Pull-up Resistance(IA)
· C-MOS Input Terminal(IC)
· C-MOS Output Terminal(OB)
When the ports are selected as the input terminal, PD0
operates also as RESTART signal input terminal to return from
STANDBY mode, and PD1 operates also as the Edge
Detector Terminal.
14
PE0
INPUT/OUTPUT
2-bit Input / Output PORTE.
Selects a terminal circuit for PORT grouped with 2 lines from
15
PE1
INPUT/OUTPUT
follows by the mask option.
· C-MOS Schmitt Trigger Input Terminal with Pull-up
Resistance(IB)
· C-MOS Schmitt Trigger Input Terminal(ID)
· C-MOS Output Terminal(OB)
VDD
–
Power Source (2.4V to 5.5V)
16
Note )
INPUT/OUTPUT : Input or Output is selected by the mask option.
3 /3
NJU3101
MEMO
[CAUTION]
The specifications on this databook are only
given for information , without any guarantee
as regards either mistakes or omissions. The
application circuits in this databook are
described only to show representative usages
of the product and not intended for the
guarantee or permission of any right including
the industrial rights.