NEC NNCD3.9C Electrostatic discharge noise clipping diodes 150 mw type Datasheet

DATA SHEET
E.S.D NOISE CLIPPING DIODES
NNCD3.3C to NNCD12C
ELECTROSTATIC DISCHARGE NOISE CLIPPING DIODES
(150 mW TYPE)
This product series is a diode developed for E.S.D (Electrostatic
PACKAGE DIMENSIONS
Discharge) noise protection. Based on the IEC1000-4-2 test on
ance of no less than 30 kV, thus making itself most suitable for
2.1 ± 0.1
external interface circuit protection.
1.3 ± 0.1
0.3 ± 0.05
0.8 ± 0.1
(in millimeters)
electromagnetic interference (EMI), the diode assures an endur-
Type NNCD3.3C to NNCD12C Series are into 2PIN Ultra Super
Mini Mold Package having allowable power dissipation of 150 mW.
FEATURES
Cathode
Indication
2), the product assures the minimum endurance of 30 kV.
• Based on the reference supply of the set, the product achieves
0.15
• Based on the electrostatic discharge immunity test (IEC1000-4-
0.7 ± 0.1
a series over a wide range (15 product name lined up).
0 ± 0.05
• External interface circuit E.S.D protection.
• Circuits for Waveform clipper, Surge absorber.
0.11+0.05
–0.01
APPLICATIONS
MAXIMUM RATINGS (TA = 25 °C)
Power Dissipation
P
150 mW
Surge Reverse Power
PRSM
85 W (tT = 10 µs 1 pulse)
Junction Temperature
Tj
150 °C
Storage Temperature
Tstg
–55 °C to +150 °C
Document No. D11771EJ2V0DS00 (2nd edition)
Date Published December 1996 N
Printed in Japan
Fig. 6
©
1996
NNCD3.3C to NNCD12C
ELECTRICAL CHARACTERISTICS (TA = 25 ˚C)
Breakdown VoltageNote 1
VBR (V)
Type Number
Dynamic
ImpedanceNote 2
Zz (Ω)
Capacitance
Ct (pF)
TEST
CONDITION
E.S.D Voltage
(kV)
MIN.
MAX.
IT (mA)
MAX.
IT (mA)
MAX.
VR (V)
TYP.
NNCD3.3C
3.10
3.50
5
130
5
20
1.0
220
30
NNCD3.6C
3.40
3.80
5
130
5
10
1.0
210
30
NNCD3.9C
3.70
4.10
5
130
5
10
1.0
200
30
NNCD4.3C
4.00
4.49
5
130
5
10
1.0
180
30
NNCD4.7C
4.40
4.92
5
130
5
10
1.0
170
30
NNCD5.1C
4.82
5.39
5
130
5
5
1.5
160
30
NNCD5.6C
5.29
5.94
5
80
5
5
2.5
140
VR = 0 V
f = 1 MHz
MIN.
C = 150 pF
R = 330 Ω
30
(IEC1000
-4-2)
5.84
6.55
5
50
5
5
3.0
120
NNCD6.8C
6.44
7.17
5
30
5
2
3.5
110
30
NNCD7.5C
7.03
7.87
5
30
5
2
4.0
90
30
NNCD8.2C
7.73
8.67
5
30
5
2
5.0
90
30
NNCD9.1C
8.53
9.58
5
30
5
2
6.0
90
30
NNCD10C
9.42
10.58
5
30
5
2
7.0
80
30
NNCD11C
10.40
11.60
5
30
5
2
8.0
70
30
NNCD12C
11.38
12.64
5
35
5
2
9.0
70
30
2. Zz is measured at IT give a small A.C. signal.
TEST
CONDITION
30
NNCD6.2C
Notes 1. Tested with pulse (40 ms)
2
Reverse Leakage
IR (µA)
NNCD3.3C to NNCD12C
TYPICAL CHARACTERISTICS (TA = 25 °C)
Fig. 1 POWER DISSIPATION vs. AMBIENT TEMPERATURE
P - Power Dissipation - mW
200
30 × 30 × 0.75
P.C.B. (Ceramic)
20 × 15 × 0.75
P.C.B. (Ceramic)
150
10 × 7.5 × 0.75
P.C.B. (Ceramic)
100
10 × 7.5 × 0.75
P.C.B. (Glass Epoxy)
50
0
0
50
100
150
200
TA - Ambient Temperature - °C
Fig. 2 IT - VBR CHARACTERISTICS
Fig. 3 IT - VBR CHARACTERISTICS
NNCD7.5C
NNCD8.2C
NNCD6.8C
NNCD9.1C
100 m
NNCD10C
1m
NNCD4.7C
100 µ
10 µ
1µ
NNCD5.1C
1n
0
1
2
3
1m
100 µ
10 µ
1µ
100 n
NNCD5.6C
NNCD6.2C
10 n
NNCD12C
10 m
IT - On State Current - A
IT - On State Current - A
NNCD3.3C
NNCD3.6C
10 m NNCD3.9C
NNCD4.3C
100 n
NNCD11C
100 m
4
5
10 n
6
7
8
9 10
VBR - Breakdown Voltage - V
1n
0
7
8
9 10 11 12 13 14 15
VBR - Breakdown Voltage - V
3
NNCD3.3C to NNCD12C
Fig. 4 ZZ - IT CHARACTERISTICS
ZZ - Dynamic Impedance - Ω
1 000
100
TYP.
NNCD3.9C
NNCD4.7C
NNCD5.1C
NNCD5.6C
NNCD10C
10
NNCD7.5C
1
0.1
1
10
100
IT - On State Current - mA
Fig. 5 TRANSIENT THERMAL IMPEDANCE
Zth - Transient Thermal Impedance - °C/W
5 000
833 °C/W
1 000
NNCD [ ] C
100
10
5
1m
10 m
100 m
1
10
100
t - Time - s
Fig. 6 SURGE REVERSE POWER RATING
TA = 25 °C
Non-repetitive
PRSM
PRSM - Surge Reverse Power - W
1 000
tT
100
NNCD [ ] C
10
1
1µ
10 µ
100 µ
1m
tT - Pulse Width - s
4
10 m
100 m
NNCD3.3C to NNCD12C
Sample Application Circuits
SetNote
Conecter
Micro
com.
PC
(CD ROM)
Palallel
Interface
Interface Cable
Note Set
Printer, P.D.C, T.V Game etc.
5
NNCD3.3C to NNCD12C
REFERENCE
Document Name
6
Document No.
NEC semiconductor device reliability/quality control system
C11745E
NEC semiconductor device reliability/quality control system
MEI-1201
Quality grade on NEC semiconductor device
C11531E
Semiconductor device mounting technology manual
C10535E
Guide to quality assurance for semiconductor device
MEI-1202
NNCD3.3C to NNCD12C
[MEMO]
7
NNCD3.3C to NNCD12C
[MEMO]
No part of this document may be copied or reproduced in any form or by any means without the prior written
consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in
this document.
NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property
rights of third parties by or arising from use of a device described herein or any other liability arising from use
of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other
intellectual property rights of NEC Corporation or others.
While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices,
the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or
property arising from a defect in an NEC semiconductor device, customers must incorporate sufficient safety
measures in its design, such as redundancy, fire-containment, and anti-failure features.
NEC devices are classified into the following three quality grades:
"Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a
customer designated "quality assurance program" for a specific application. The recommended applications of
a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device
before using it in a particular application.
Standard: Computers, office equipment, communications equipment, test and measurement equipment,
audio and visual equipment, home electronic appliances, machine tools, personal electronic
equipment and industrial robots
Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support)
Specific: Aircrafts, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems or medical equipment for life support, etc.
The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data Books.
If customers intend to use NEC devices for applications other than those specified for Standard quality grade,
they should contact an NEC sales representative in advance.
Anti-radioactive design is not implemented in this product.
M4 96.5
8
Similar pages