Vishay NOMCT16011003ZTF Molded, 50 mil pitch, dual-in-line resistor network Datasheet

SURFACE MOUNT
NETWORKS
NOMC
Vishay Thin Film
Molded, 50 Mil Pitch, Dual-In-Line Resistor Network
Narrow Body
FEATURES
• Lead (Pb)-free available
Pb-free
• Standard 14 and 16 pin counts
(0.150" Narrow Body) JEDEC MS-012
Available
RoHS*
COMPLIANT
• Rugged molded case construction
• Stable thin film element (500 ppm at + 70 °C at 2000 h)
Actual Size
The NOMC series features a standard 14 and 16 pin narrow
body (0.150") small outline surface mount style. It can
accommodate resistor networks to your particular
application requirements. The networks can be constructed
with Passivated Nichrome (standard), or Tantalum Nitride (1)
resistor films to optimize performance.
• Low temperature coefficient (± 25 ppm/°C)
TYPICAL PERFORMANCE
ABS
TCR
Note
(1) Available upon request. Resistance value range and performance
differs from Passivated Nichrome standard electrical
specifications on datasheet, consult factory.
TOL
SCHEMATICS
TRACKING
25
5
ABS
RATIO
0.10
0.05
STANDARD RESISTANCE OFFERING
(Equal Value Resistors)
ISOLATED (03) SCHEMATIC
BUSSED (01) SCHEMATIC
1 kΩ
10 kΩ
2 kΩ
20 kΩ
NOMC1401 or NOMCT1401
5 kΩ
NOMC1601 or NOMCT1601
The 01 circuit provides a choice of 13 or 15 equal value resistors
each connected between a common lead (14 or 16).
Custom schematics available
10 kΩ
20 kΩ
100 kΩ
Consult factory for additional values
NOMC1403 or NOMCT1403
NOMC1603 or NOMCT1603
The 03 circuit provides a choice of 7 or 8 equal value resistors
each connected between a common lead (14 or 16).
Custom schematics available
STANDARD ELECTRICAL SPECIFICATIONS
TEST
SPECIFICATIONS
Pin Number
Resistance Range
TCR
CONDITIONS
14, 16
Bussed (01) Schematic
100 Ω to 50 kΩ each resistor
Isolated (03) Schematic
100 Ω to 100 kΩ each resistor
Tracking
± 5 ppm/°C typical
- 55 °C to + 125 °C
Absolute
± 25 ppm/°C standard
- 55 °C to + 125 °C
* Pb containing terminations are not RoHS compliant, exemptions may apply
www.vishay.com
24
For technical questions, contact: [email protected]
Document Number: 60007
Revision: 02-Oct-08
Molded, 50 Mil Pitch, Dual-In-Line Resistor Network
Narrow Body
Vishay Thin Film
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Ratio
Absolute
Resistor
Package
ΔR Absolute
ΔR Ratio
Tolerance
Power Rating
Stability
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
Thermal EMF
Absolute
Shelf Life Stability
Ratio
SPECIFICATIONS
CONDITIONS
± 0.1 % to ± 0.025 %
± 1.0 % to ± 0.10 %
50 mW per element typical
400 mW 500 mW
500 ppm
150 ppm
< 0.1 ppm/V
50 V
- 55 °C to + 125 °C
- 55 °C to + 150 °C
< - 30 dB
0.08 µV/°C
100 ppm
20 ppm
+ 25 °C
+ 25 °C
Max. at + 70 °C
Max. at + 70 °C
2000 h at + 70 °C
2000 h at + 70 °C
1 year at + 25 °C
1 year at + 25 °C
DIMENSIONS AND IMPRINTING in inches and millimeters
DIMENSION
H E
Index Area
PIN 1 Locator
h x 45°
O
C
e
A
B
L
A1
H
E
O
A
e
B
C
L
A1
h
14
Inches
0.235
0.154
0.340
0.063
0.050
0.015
0.008
0.025
0.006
0.015
16
mm
5.969
3.911
8.363
1.60
1.270
0.381
0.203
0.635
0.152
0.381
Inches
0.235
0.154
0.390
0.063
0.050
0.015
0.008
0.025
0.006
0.015
mm
5.969
3.91
9.906
1.60
1.270
0.381
0.203
0.635
0.152
0.381
MECHANICAL SPECIFICATIONS
Resistive Element
Substrate Material
Terminals
Lead Coplanarity
Body
Marking Resistance to Solvents
Model NOMC
Model NOMCT
Passivated Nichrome (standard) or Tantalum Nitride (1)
Silicon
Copper
± 0.004
Molded Epoxy
Per MIL-PRF-83401
85 Sn/15 Pb (Plated)
100 % Matte Tin (Plated)
Note
(1) Available upon request. Resistance value range and performance differs from Passivated Nichrome standard electrical specifications on
datasheet, consult factory.
ORDERING INFORMATION CHECK LIST (CUSTOMS)
Special requirements should be identified in advance, but as a minimum, you should have the following information ready.
ELECTRICAL
MECHANICAL
1. Maximum allowable seated height (from PC board to top of
1. Resistors, by value and tolerance
network)
2. Reference resistor(s) and matching of which resistors to which
2. Special marking concerns
reference resistors
3. Schematic pin out of package
3. Resistance by ratio
4. Absolute temperature coefficient of resistivity
5. Temperature tracking of subordinate resistors to reference
resistor(s)
6. Maximum operating voltage
7. Resistor power ratings
8. Operating temperature range
Document Number: 60007
Revision: 02-Oct-08
For technical questions, contact: [email protected]
www.vishay.com
25
SURFACE MOUNT
NETWORKS
NOMC
SURFACE MOUNT
NETWORKS
NOMC
Molded, 50 Mil Pitch, Dual-In-Line Resistor Network
Narrow Body
Vishay Thin Film
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: NOMC16031002BUF (preferred part number format)
N
N
O
M
C
1
6
0
3
1
0
0
2
B
U
F
O
M
C
T
1
4
0
3
1
0
0
3
Z
T
1
GLOBAL MODEL
(4 or 5 digits)
PINS
SCHEMATIC
RESISTANCE
NOMC
(Tin Lead)
14
16
01 = 13 or 15
Bussed equal
value resistors
03 = 7 or 8
Isolated equal
value resistors
First 3 digits are
significant figures and
the last digit specifies
the number of zeros
to follow.
NOMCT
(Lead (Pb)-free)
(e3)
Example:
1002 = 10K
1003 = 100K
TOLERANCE AND
RATIO TOLERANCE
Ratio
Abs. Tol.
0.05 %
0.1 %
0.1 %
0.1 %
0.5 %
0.025 %
*A = 0.1 %
B = 0.1 %
C = 0.25 %
D = 0.5 %
F=1%
*Z = 0.1 %
* Tol. available 1K and up
PACKAGING
TAPE AND REEL
T0 = 100 Min 100 Mult
T1 = 1000 Min 1000 Mult
T3 = 300 Min 300 Mult
T5 = 500 Min 500 Mult
TF = Full Reel 2500
TS = 100 Min 1 Mult
UF = TUBED
Historical Part Number example: NOMC16031002Z (will continue to be accepted)
NOMC
16
03
1002
Z
SERIES
PINS
SCHEMATIC
RESISTANCE
TOLERANCE AND
RATIO TOLERANCE
www.vishay.com
26
For technical questions, contact: [email protected]
Document Number: 60007
Revision: 02-Oct-08
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
Similar pages