ON NP0080TAT1G Low capacitance protector Datasheet

NP0080TA Series
Low Capacitance Protector
The NP series of low voltage/low capacitance overvoltage
protection devices protect high speed xDSL line drivers and chipsets
from both Lightning Surge and ESD events. The devices are designed
with a low nominal capacitance as well as extremely low differential
capacitance across frequency and voltage. The inherent low off−state
leakage current provides superior performance in low voltage
high speed applications. These characteristics allow protection of the
system without distortion of the high speed data signal.
With it’s advanced silicon structure the NP product is able to clamp
very fast ESD events, and crowbar high energy surge events to help
protect sensitive IC’s all in a small footprint. The convenient flow thru
design minimizes trace routing while maximizing circuit
performance.
The NP series of low voltage/low capacitance devices helps
designers to comply with the various regulatory standards and
recommendations including: GR−1089−CORE, IEC 61000−4−5, ITU
K.20/K.21/K.45, IEC 60950,
TIA−968−A, FCC Part 68, EN 60950, UL 1950.
http://onsemi.com
5
1
TSOP−5
SN SUFFIX
CASE 483
MARKING DIAGRAM
5
xxA DG
G
Features
•
•
•
•
•
•
•
•
•
•
1
Low Nominal Capacitance
Extremely Low Differential Capacitance
Low Leakage (Transparent)
High Surge Capability
Precise Clamping Voltage
Small Package Size
Bi−directional Operation
Flow Thru Layout
IEC 61000−4−2 Level 4 ESD protection
These are Pb−Free Devices
xxA
D
G
= Specific Device Code
(NP0xx0TAT1G)
= Date Code
= Pb−Free Package
(Note: Microdot may be in either location)
PIN CONNECTIONS
1
Typical Applications
• VDSL, ADSL, Access, Central Office, and Customer Premise
modems and gateway IC side line driver chipset protection
5
2
3
• 10/100/1000 Ethernet Protection
• RS−232, RS−485 Transceiver Protection
4
(Top View)
ELECTRICAL CHARACTERISTICS
Device
VRWM
VBR
IR@
VR=VRWM
C@
VR = 2 V
D5C
0 V−VRWM
(V)
(V)
(mA)
(pF)
(pF)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 4 of this data sheet.
NP0080TAT1G
8
9.5
0.5
13
4
NP0120TAT1G
12
12.5
0.5
11
3
NP0160TAT1G
16
18
0.5
11
3
SURGE/ESD RATINGS
Waveform
Value
8x20mA
ESD Air
ESD Contact
50 A
15 kV
8 kV
© Semiconductor Components Industries, LLC, 2008
October, 2008 − Rev. 0
1
Publication Order Number:
NP0080TA/D
NP0080TA Series
ELECTRICAL CHARACTERISTICS TABLE (TA = 25°C unless otherwise noted)
Rating
Symbol
VRWM
VBR1
V(BO)
Min
Repetitive peak off−state voltage: Rated maximum
(peak) continuous voltage that may be applied in the
off−state condition
Breakdown Voltage: The minimum voltage across the
device in or at the breakdown region. Measured at
IBR = 1 mA
Breakover Voltage: The maximum voltage across the
device in or at the breakover region. Measured at
I(BO) = 800 mA
IR
Off−state Current: The dc value of current that results
from the application of the off−state voltage
IH
Holding Current: The minimum current required to
maintain the device in the on−state.
Co
Off−State Capacitance: f = 1.0 MHz, Vd = 1.0 Vrms,
VD = −2 Vdc
DC1
Max
Unit
NP0080TAT1G
±8
V
NP0120TAT1G
±12
NP0160TAT1G
±16
NP0080TAT1G
9.5
NP0120TAT1G
12.5
NP0160TAT1G
18
Typ
V
NP0080TAT1G
20
NP0120TAT1G
30
NP0160TAT1G
40
0.5
50
D Capacitance: f = 1.0 MHz, Vd = 1.0 Vrms,
VD = | 0 V – Vrwm|
13
NP0120TAT1G
11
NP0160TAT1G
11
4
NP0120TAT1G
3
NP0160TAT1G
mA
mA
NP0080TAT1G
NP0080TAT1G
V
pF
pF
3
IPPS
Peak Pulse Current: Rated maximum value of peak
impulse pulse current that may be applied. 8x20 ms,
IEC*61000*4*5
ESD
Electrostatic Discharge: Rated maximum value of ESD
per IEC−61000−4−2
TSTG
Storage Temperature Range
−55
+150
°C
Operating Junction Temperature Range
−40
+125
°C
TJ
50
Contact
http://onsemi.com
2
A
kV
8
Air
15
NP0080TA Series
+I
Parameter
VRWM
Repetitive peak off−state voltage
VBR
Breakdown voltage
Breakover voltage
IR
Off−state current
IH
Holding current
IR
−V
VBR
+V
VRWM
Protection
Region
V(BO)
IH
−I
Off−State
Region
(Transparent)
V(BO)
Protection
Region
Symbol
Figure 1.
Application Information
The NPXXXXTAT can be used after the isolation transformer as protection for the xDSL line driver. The devices can be
configured to protect against both differential and common mode surges and ESD.
+
+
LINE DRIVER
NP0080TAT
−
NP0080TAT
RING
RING
Figure 2.
Figure 3.
+
NP0080TAT
−
NP0080TAT
NP0080TAT
TIP
LINE DRIVER
−
TIP
NP0080TAT
LINE DRIVER
TIP
RING
Figure 4.
1
5
PCB Trace
4
PCB Trace
2
3
1. Connect pin 1 to pin 5 on PCB
2. Connect pin 3 to pin 4 on PCB
3. Pin 2 is no connection
Figure 5. PCB Layout
http://onsemi.com
3
NP0080TA Series
DEVICE ORDERING INFORMATION
Package
Shipping†
NP0080TAT1G
TSOP−5
(Pb−Free)
3000 / Tape & Reel
NP0120TAT1G
TSOP−5
(Pb−Free)
3000 / Tape & Reel
NP0160TAT1G
TSOP−5
(Pb−Free)
3000 / Tape & Reel
Device
†For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting
Techniques Reference Manual, SOLDERRM/D.
http://onsemi.com
4
NP0080TA Series
PACKAGE DIMENSIONS
TSOP−5
CASE 483−02
ISSUE H
2X
0.10 T
2X
0.20 T
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. MAXIMUM LEAD THICKNESS INCLUDES
LEAD FINISH THICKNESS. MINIMUM LEAD
THICKNESS IS THE MINIMUM THICKNESS
OF BASE MATERIAL.
4. DIMENSIONS A AND B DO NOT INCLUDE
MOLD FLASH, PROTRUSIONS, OR GATE
BURRS.
5. OPTIONAL CONSTRUCTION: AN
ADDITIONAL TRIMMED LEAD IS ALLOWED
IN THIS LOCATION. TRIMMED LEAD NOT TO
EXTEND MORE THAN 0.2 FROM BODY.
D 5X
NOTE 5
0.20 C A B
M
5
1
4
2
L
3
B
S
K
DETAIL Z
G
A
DIM
A
B
C
D
G
H
J
K
L
M
S
DETAIL Z
J
C
0.05
SEATING
PLANE
H
T
SOLDERING FOOTPRINT*
0.95
0.037
MILLIMETERS
MIN
MAX
3.00 BSC
1.50 BSC
0.90
1.10
0.25
0.50
0.95 BSC
0.01
0.10
0.10
0.26
0.20
0.60
1.25
1.55
0_
10 _
2.50
3.00
1.9
0.074
2.4
0.094
1.0
0.039
0.7
0.028
SCALE 10:1
mm Ǔ
ǒinches
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent
rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other
applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur.
Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries,
affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury
or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an
Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5773−3850
http://onsemi.com
5
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
NP0080TA/D
Similar pages