ETC1 NRN9C104GTC Single-in-line sip resistor networks conformal coated low profile Datasheet

Resistor Networks
NRN Series
FEATURES
• CERMET THICK FILM CONSTRUCTION
• LOW PROFILE 5mm (.200" BODY HEIGHT)
• WIDE RANGE OF RESISTANCE VALUES
• HIGH RELIABILITY AT ECONOMICAL PRICING
• 4 PINS TO 13 PINS AVAILABLE
• 6 CIRCUIT TYPES
CHARACTERISTICS
Item
Rated Power per Resistor at 70o C
Specifications
Comm on/Bussed:
Isolated:
125mW
Series:
Ladder:
Voltage Divider: 75mW
Terminator:
Operating Temperature Range
-55 ~ +125 o C
Resistance Range
10Ω ~ 3.3MegΩ (E24 Values)
Resistance Temperature Coefficient
±100 ppm/o C (10Ω ~2MegΩ )
±200 ppm/o C (Values> 2MegΩ )
TC Tracking
±50 ppm/o C
Max. Working Voltage
100 V or Rated Power x Resistance, whichever is less
Short Time Overload
Load Life
Mositure Load Life
Temperature Cycle
Soldering Heat Resistance
±1% : JIS C-5202 5 5, 2.5 times max. working voltage
for 5 seconds
±3% : JIS C-5202 7.10, 1000 hrs. at 70 o C with rated
power applied, 1.5 hrs. on and 0.5 hr. off
±3% : JIS C-5202 7.9, 500 hrs. at 40 o C and 90 ~ 95%
RH with rated power applied, 1.5 hrs. on and 0.5 hr. off
±1% : JIS C-5202 7.4, 5 Cycles of 30 minutes at -25o C,
15 minutes at +25 o C, 30 minutes at +70 o C and 15
minutes at +25 o C
±1% : JIS C-5202 6.4, 260±5 o C for 10±1 seconds, 3mm
from the body
Vibration
±1% : 12hrs. at max. 20Gs between 10 to 2kHz
Insulation Resistance
10,000 mW min. at 100v
Solderability
Per MIL-R-83401
100
POWER DERATING CURVE:
For resistors operating in ambient temperatures above 70oC, power
rating should be derated in accordance with the curve shown.
DERATING RATE (%)
LEADED
SINGLE-IN-LINE “SIP” RESISTOR NETWORKS
CONFORMAL COATED, LOW PROFILE
80
60
40
20
0
0
40
80
120
70
140
125
AMBIENT TEMPERATURE (oC)
®
NIC COMPONENTS CORPORATION
70 Maxess Rd., Melville, NY 11747
•
(631)396-7500 FAX (631)396-7575
Resistor Networks
NRN Series
DIMENSIONS (mm)
➛
➛
➛
➛ 2.54 max.
No. of PINS
L max
4
10.2
5
12.7
6
15.3
➛
MAX
1
0.50
±0.1
2
3
4
5
6
➛ ➛
➛
5.08 max.
7
3.18 +.640
-.000
➛ ➛ 0.25 ±0.1
➛ ➛
1.2 max.
➛ ➛ ➛ 2.54
➛
±0.1
STANDARD CIRCUITS
Fig. 1: BUSSED/COMMON CIRCUIT
Fig. 2: ISOLATED/INDEPENDENT CIRCUIT
Fig. 4: LADDER CIRCUIT
R
R
R
R
R
R
R
R
R
R
R
2R
2R
2R
2R
2R
2R
R2
R2
R2
R2
R2
R2
17.8
8
20.4
9
22.9
10
25.4
11
28.0
12
30.5
13
33.1
Fig. 3: SERIES CIRCUIT
Fig. 5: VOLTAGE DIVIDER CIRCUIT
R
7
LEADED
L
Max.
Fig. 6: TERMINATION CIRCUIT
R1
R2
R1
R2
R1
R2
R1
R2
R1
R2
R1
R2
PART NUMBERING SYSTEM
NRN
10
C
104
G
XX
T.C. Option
Tolerance Code: G = ±2%, J = ±5%
Resistance in ohms first 2 digits are significant, third
is no. of zeros, “R” indicates decimal under 10 ohms
Series
Terminator Code
R1/R2
Circuit Type: C = Bussed/Common, I = Isolated
S = Series, V = Voltage Divider,
No. of PINS
Terminator Code = See chart, Ladder Code = See chart
Part Marking Includes:
1.) Number of PINS.
2.) Circuit Type: "1" or "C" = Common/Bussed
"2" or "I" = Isolated
3.) Resistance Value (in ohms).
4.) Resistance Tolerance:
"G" = ±2%
"J" = ±5%
TA
160/240
TB
180/390
TC
220/270
TD
220/330
Ladder Code
R/2R
TE
330/390
LA
10K/20K
TF
330/470
LB
25K/50K
TG
330/680
LC
50K/100K
TH
1.5K/3.3K
LD
100K/200K
TI
3.0K/6.2K
LS
Special
TS
Special
®
NIC COMPONENTS CORPORATION
70 Maxess Rd., Melville, NY 11747
•
(631)396-7500 FAX (631)396-7575
Similar pages