ON NTB75N03L09 Power mosfet Datasheet

NTP75N03L09,
NTB75N03L09
Power MOSFET
75 Amps, 30 Volts, N−Channel
TO−220 and D2PAK
http://onsemi.com
This Logic Level Vertical Power MOSFET is a general purpose part
that provides the “best of design” available today in a low cost power
package. Avalanche energy issues make this part an ideal design in.
The drain−to−source diode has a ideal fast but soft recovery.
75 AMPERES, 30 VOLTS
RDS(on) = 8 m
N−Channel
D
Features
•
•
•
•
•
•
•
Pb−Free Packages are Available
Ultra−Low RDS(on), Single Base, Advanced Technology
SPICE Parameters Available
Diode is Characterized for Use in Bridge Circuits
IDSS and VDS(on) Specified at Elevated Temperatures
High Avalanche Energy Specified
ESD JEDAC Rated HBM Class 1, MM Class B, CDM Class 0
G
S
MARKING
DIAGRAMS
4
Drain
Typical Applications
•
•
•
•
4
Power Supplies
Inductive Loads
PWM Motor Controls
Replaces MTP75N03HDL and MTB75N03HDL in Many
Applications
75N
03L09
AYWW
TO−220
CASE 221A
STYLE 5
1
2
1
Gate
3
3
Source
2
Drain
4
Drain
4
2
1
D2PAK
CASE 418AA
STYLE 2
75N03L09
AYWW
3
2
1
3
Drain
Gate
Source
75N03L09
A
Y
WW
= Device Code
= Assembly Location
= Year
= Work Week
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 2 of this data sheet.
 Semiconductor Components Industries, LLC, 2004
August, 2004 − Rev. 6
1
Publication Order Number:
NTP75N03L09/D
NTP75N03L09, NTB75N03L09
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted)
Rating
Symbol
Value
Unit
Drain−to−Source Voltage
VDSS
30
Vdc
Drain−to−Gate Voltage
(RGS = 10 M)
VDGB
30
Vdc
Gate−to−Source Voltage − Continuous
VGS
±20
Vdc
Non−repetitive (tp ≤ 10 ms)
VGS
±24
Vdc
ID
ID
75
59
225
Adc
PD
125
1.0
2.5
W
W/°C
W
TJ and Tstg
−55 to 150
°C
EAS
1500
mJ
RJC
RJA
RJA
1.0
62.5
50
°C/W
TL
260
°C
Drain Current
− Continuous @ TC = 25°C
− Continuous @ TC = 100°C
− Single Pulse (tp ≤ 10 s)
IDM
Total Power Dissipation @ TC = 25°C
Derate above 25°C
Total Power Dissipation @ TA = 25°C (Note 1)
Operating and Storage Temperature Range
Single Pulse Drain−to−Source Avalanche Energy − Starting T J = 25°C
(VDD = 38 Vdc, VGS = 10 Vdc, L = 1 mH, IL(pk) = 55 A, VDS = 40 Vdc)
Thermal Resistance
− Junction−to−Case
− Junction−to−Ambient
− Junction−to−Ambient (Note 1)
Maximum Lead Temperature for Soldering Purposes, 1/8″ from case for 10 seconds
Apk
Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit
values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied,
damage may occur and reliability may be affected.
1. When surface mounted to an FR4 board using the minimum recommended pad size.
ORDERING INFORMATION
Package
Shipping†
TO−220
50 Units/Rail
TO−220
(Pb−Free)
50 Units/Rail
D2PAK
50 Units/Rail
NTB75N03L09G
D2PAK
(Pb−Free)
50 Units/Rail
NTB75N03L09T4
D2PAK
800 Tape & Reel
Device
NTP75N03L09
NTP75N03L09G
NTB75N03L09
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
http://onsemi.com
2
NTP75N03L09, NTB75N03L09
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)
Characteristic
Symbol
Min
Typ
Max
Unit
30
34
−57
−
−
Vdc
mV°C
−
−
−
−
1.0
10
−
−
±100
nAdc
1.0
−
1.6
−6
2.0
−
Vdc
mV°C
−
6.5
8.0
−
−
0.52
0.35
0.68
0.50
gFS
−
58
−
m
Ciss
−
4398
5635
pF
Coss
−
1160
1894
Crss
−
317
430
td(on)
−
16
30
tr
−
130
200
td(off)
−
65
110
OFF CHARACTERISTICS
Drain −Source Breakdown Voltage (Note 2)
(VGS = 0 Vdc, ID = 250 Adc)
Temperature Coefficient (Negative)
V(BR)DSS
Zero Gate Voltage Drain Current
(VDS = 30 Vdc, VGS = 0 Vdc)
(VDS = 30 Vdc, VGS = 0 Vdc, TJ = 150°C)
IDSS
(VGS = ±20 Vdc, VDS = 0 Vdc)
Gate−Body Leakage Current
IGSS
Adc
ON CHARACTERISTICS (Note 2)
Gate Threshold Voltage (Note 2)
(VDS = VGS, ID = 250 Adc)
Threshold Temperature Coefficient (Negative)
VGS(th)
Static Drain−to−Source On−Resistance (Note 2)
(VGS = 5.0 Vdc, ID = 37.5 Adc)
RDS(on)
Static Drain−to−Source On Resistance (Note 2)
(VGS = 10 Vdc, ID = 75 Adc)
(VGS = 10 Vdc, ID = 37.5 Adc, TJ = 125°C)
VDS(on)
Forward Transconductance (Notes 2 & 4)
(VDS = 3 Vdc, ID = 20 Adc)
m
Vdc
DYNAMIC CHARACTERISTICS (Note 4)
Input Capacitance
Output Capacitance
(VDS = 25 Vdc,
Vdc VGS = 0
0,
f = 1.0 MHz)
Transfer Capacitance
SWITCHING CHARACTERISTICS (Notes 3 & 4)
Turn−On Delay Time
Rise Time
Turn−Off Delay Time
(VGS = 5.0
5 0 Vdc,
Vdc
VDD = 20 Vdc, ID = 75 Adc,
RG = 4.7 )) ((Note 2))
Fall Time
Gate Charge
(VGS = 5.0 Vdc,
ID = 75 Adc,
Adc
VDS = 24 Vdc) (Note 2)
ns
tf
−
105
175
QT
−
57
75
Q1
−
11
15
Q2
−
34
50
VSD
−
−
1.19
1.09
1.25
−
Vdc
trr
−
37
−
ns
ta
−
20
−
tb
−
17
−
QRR
−
0.023
−
nC
SOURCE−DRAIN DIODE CHARACTERISTICS
Forward On−Voltage
Reverse Recovery Time
(Note 4)
(IS = 75 Adc, VGS = 0 Vdc)
(IS = 75 Adc, VGS = 0 Vdc, TJ = 125°C)
(Note 2)
(IS = 75 Adc,
Adc VGS = 0 Vdc
dlS/dt = 100 A/s) (Note 2)
Reverse Recovery Stored
Charge (Note 4)
2. Pulse Test: Pulse Width 300 S, Duty Cycle 2%.
3. Switching characteristics are independent of operating junction temperatures.
4. From characterization test data.
http://onsemi.com
3
C
NTP75N03L09, NTB75N03L09
150
VGS = 4 V
VGS = 4.5 V
90
VGS = 5 V
VGS = 6 V
VGS = 8 V
VGS = 10 V
60
VGS = 3 V
30
TJ = 25°C
VGS = 2.5 V
0
105
90
75
60
TJ = 25°C
45
30
TJ = 100°C
15
1
1.5
2.5
3
3.5
VGS, GATE−TO−SOURCE VOLTAGE (VOLTS)
Figure 1. On−Region Characteristics
Figure 2. Transfer Characteristics
VGS = 5 V
TJ = 100°C
0.0075
0.007
TJ = 25°C
0.0065
0.006
0.0055
TJ = −55°C
0.005
0.0045
0.004
10
20
30
40
50
60
70
80
90 100 120
4
0.009
TJ = 25°C
0.008
0.007
VGS = 5 V
0.006
VGS = 10 V
0.005
0.004
0
20
ID, DRAIN CURRENT (AMPS)
40
60
80
100
120
ID, DRAIN CURRENT (AMPS)
Figure 3. On−Resistance vs. Drain Current and
Temperature
Figure 4. On−Resistance vs. Drain Current and
Gate Voltage
1000
1.6
VGS = 0 V
VGS = 5.0 V
ID = 37.5 A
1.4
IDSS, LEAKAGE (nA)
RDS(on), DRAIN−TO SOURCE RESISTANCE (NORMALIZED)
2
TJ = −55°C
VDS, DRAIN−TO−SOURCE VOLTAGE (VOLTS)
0.0085
0.008
120
0
0.5
1.2 1.4 1.6 1.8 2 2.2 2.4 2.6
RDS(on), DRAIN−TO SOURCE RESISTANCE ()
RDS(on), DRAIN−TO SOURCE RESISTANCE ()
0 0.2 0.4 0.6 0.8 1
VDS ≥ 10 V
135
VGS = 3.5 V
ID, DRAIN CURRENT (AMPS)
ID, DRAIN CURRENT (AMPS)
120
1.2
1
0.8
0.6
−50
TJ = 125°C
100
TJ = 100°C
10
1
−25
0
25
50
75
100
125
150
5
10
15
20
25
30
TJ, JUNCTION TEMPERATURE (°C)
VDS, DRAIN−TO−SOURCE VOLTAGE (VOLTS)
Figure 5. On−Resistance Variation Temperature
Figure 6. Drain−to−Source Leakage Current vs.
Voltage
http://onsemi.com
4
NTP75N03L09, NTB75N03L09
10
VGS VDS
VDS = 0 V
VGS = 0 V
TJ = 25°C
10000
C, CAPACITANCE (pF)
VGS, GATE−TO−SOURCE VOLTAGE (V)
12000
8000
6000
Ciss
4000
Coss
2000
Crss
0
10 8 6 4 2 0 2 4 6 8 10 12 14 16 18 20 22 25
30
8
VGS
QT
Q2
Q1
4
10
2
ID = 75 A
TJ = 25°C
Q3
0
0
10
20
30
40
50
Qg, TOTAL GATE CHARGE (nC)
GATE−TO−SOURCE OR DRAIN−TO−SOURCE
VOLTAGE (VOLTS)
Figure 7. Capacitance Variation
IS, SOURCE CURRENT (AMPS)
tf
100
td(off)
td(on)
1
2.2
4.7
6.2
VDD = 15 V
VGS = 5 V
9.1
10
20
75
70
65
60
55
50
45
40
35
30
25
20
15
10
5
0
0.0
VGS = 0 V
TJ = 25°C
0.2
0.4
0.6
0.8
RG, GATE RESISTANCE ()
VSD, SOURCE−TO−DRAIN VOLTAGE (VOLTS)
Figure 9. Resistive Switching Time Variation
vs. Gate Resistance
Figure 10. Diode Forward Voltage vs. Current
EAS, SINGLE PULSE DRAIN−TO−SOURCE
AVALANCHE ENERGY (mJ)
t, TIME (ns)
tr
10
0
60
Figure 8. Gate−to−Source and
Drain−to−Source Voltage vs. Total Charge
1000
TJ = 25°C
ID = 75 A
20
VDS
6
1600
ID = 75 A
1400
1200
1000
800
600
400
200
0
25
50
75
100
125
TJ, STARTING JUNCTION TEMPERATURE (°C)
Figure 11. Maximum Avalanche Energy vs.
Starting Junction Temperature
http://onsemi.com
5
150
1.0
NTP75N03L09, NTB75N03L09
PACKAGE DIMENSIONS
TO−220
CASE 221A−09
ISSUE AA
−T−
B
SEATING
PLANE
C
F
T
S
4
DIM
A
B
C
D
F
G
H
J
K
L
N
Q
R
S
T
U
V
Z
A
Q
1 2 3
U
H
K
Z
L
R
V
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. DIMENSION Z DEFINES A ZONE WHERE ALL
BODY AND LEAD IRREGULARITIES ARE
ALLOWED.
J
G
D
N
INCHES
MIN
MAX
0.570
0.620
0.380
0.405
0.160
0.190
0.025
0.035
0.142
0.147
0.095
0.105
0.110
0.155
0.018
0.025
0.500
0.562
0.045
0.060
0.190
0.210
0.100
0.120
0.080
0.110
0.045
0.055
0.235
0.255
0.000
0.050
0.045
−−−
−−−
0.080
STYLE 5:
PIN 1.
2.
3.
4.
http://onsemi.com
6
GATE
DRAIN
SOURCE
DRAIN
MILLIMETERS
MIN
MAX
14.48
15.75
9.66
10.28
4.07
4.82
0.64
0.88
3.61
3.73
2.42
2.66
2.80
3.93
0.46
0.64
12.70
14.27
1.15
1.52
4.83
5.33
2.54
3.04
2.04
2.79
1.15
1.39
5.97
6.47
0.00
1.27
1.15
−−−
−−−
2.04
NTP75N03L09, NTB75N03L09
PACKAGE DIMENSIONS
D2PAK
CASE 418AA−01
ISSUE O
NOTES:
1. DIMENSIONING AND TOLERANCING
PER ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
C
E
V
W
−B−
4
DIM
A
B
C
D
E
F
G
J
K
M
S
V
A
1
2
S
3
−T−
SEATING
PLANE
K
W
J
G
D
STYLE 2:
PIN 1. GATE
2. DRAIN
3. SOURCE
4. DRAIN
3 PL
0.13 (0.005)
M
T B
INCHES
MIN
MAX
0.340 0.380
0.380 0.405
0.160 0.190
0.020 0.036
0.045 0.055
0.310
−−−
0.100 BSC
0.018 0.025
0.090
0.110
0.280
−−−
0.575 0.625
0.045 0.055
M
SOLDERING FOOTPRINT*
8.38
0.33
1.016
0.04
10.66
0.42
5.08
0.20
3.05
0.12
17.02
0.67
SCALE 3:1
mm inches
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
http://onsemi.com
7
MILLIMETERS
MIN
MAX
8.64
9.65
9.65 10.29
4.06
4.83
0.51
0.92
1.14
1.40
7.87
−−−
2.54 BSC
0.46
0.64
2.29
2.79
7.11
−−−
14.60 15.88
1.14
1.40
NTP75N03L09, NTB75N03L09
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 61312, Phoenix, Arizona 85082−1312 USA
Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada
Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
ON Semiconductor Website: http://onsemi.com
Order Literature: http://www.onsemi.com/litorder
Japan: ON Semiconductor, Japan Customer Focus Center
2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051
Phone: 81−3−5773−3850
http://onsemi.com
8
For additional information, please contact your
local Sales Representative.
NTP75N03L09/D
Similar pages