NTCLE400, NTCLS100, NTCLP100 www.vishay.com Vishay BCcomponents NTC Thermistors, Special Long Lead Sensors FEATURES • • • • Accurate over wide temperature range High stability Excellent price / performance ratio High adhesive strength between PVC wire and the encapsulating laquer • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS QUICK REFERENCE DATA PARAMETER VALUE UNIT Temperature measurement, sensing and control in remote locations and for various environmental conditions. 2.2K to 100K ±3 % DESCRIPTION 3977 to 4190 K ± 0.75 to ± 1.5 % -40 to +85 °C Maximum power dissipation at 55 °C 250 mW These sensors exist of a small NTC chip reflow soldered between two AWG #24 UL-2468 wires. They are lacquered and insulated with black epoxy (NTCLE400 type), sleeved (NTCLS100 type) or potted into a brass pipe (NTCLP100 type). Min. dielectric withstanding voltage between terminals and sensor body 1500 VAC Resistance value at 25 °C (R25) Tolerance on R25-value (2) B25/85-value Tolerance on B25/85-value Operating temperature range at zero dissipation MARKING UL mark on wire, no mark on body. PACKAGING Dissipation factor: NTCLE400... 6.0 NTCLS100... 8.0 NTCLP100... 6.0 mW/K DESIGN-IN SUPPORT Response time (1): 7 NTCLE400... NTCLS100... 15 NTCLP100... 10 s 4 NTCLS100... 6 NTCLP100... 6 Other wire length and wire type (UL-2651 PVC 105 °C) are available on request. The products can be provided with a connector on request. For complete curve computation, please www.vishay.com/thermistors/ntc-curve-list/. Weight NTCLE400... The thermistors are packed in cardboard boxes; each box containing 500 pieces. g Notes (1) Response time in silicone oil MS 200/50. This is the time needed for the sensor to reach 63.2 % of the total temperature difference when subjected to a temperature change from 25 °C in air to 85 °C in oil (2) Tighter tolerances on R are available upon request 25 visit: MOUNTING By soldering or clamping the wire ends, in any position. Body can be inserted or taped attached. Not intended for fluid immersed applications. ELECTRICAL DATA AND ORDERING INFORMATION SAP MATERIAL AND ORDERING NUMBER (1)(2) R25 () R25-TOL. (± %) B25/85 (K) B25/85-TOL. (± %) EPOXY TYPE SLEEVED TYPE PIPE TYPE 2200 3 3977 0.75 NTCLE400E3222H NTCLS100E3222H NTCLP100E3222H 4700 3 3977 0.75 NTCLE400E3472H NTCLS100E3472H NTCLP100E3472H 5000 3 3977 0.75 NTCLE400E3502H NTCLS100E3502H NTCLP100E3502H 10 000 3 3977 0.75 NTCLE400E3103H NTCLS100E3103H NTCLP100E3103H 47 000 3 4090 1.5 NTCLE400E3473H NTCLS100E3473H NTCLP100E3473H 100 000 3 4190 1.5 NTCLE400E3104H NTCLS100E3104H NTCLP100E3104H Notes (1) Other values and tolerances based on the NTCC100E4 series are available on request. (www.vishay.com/doc?29058) (2) The specified catalog numbers refer to products with L = 400 mm, without connector and adopt UL-2468.AWG24 wire Revision: 24-Aug-17 Document Number: 29060 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 NTCLE400, NTCLS100, NTCLP100 www.vishay.com Vishay BCcomponents DIMENSIONS in millimeters Epoxy-coated type NTCLE400E.... 6 max. 5±2 17 ± 3 L L = 400 mm + 15/- 0 Other wire lengths or connector attached available on request. Sleeved type NTCLS100E.... 8 max. 5±2 15 max. 25 ± 5 L L = 400 mm + 15/- 0 Other wire lengths or connector attached available on request. Brass-pipe type NTCLP100E.... 6 ± 0.1 5±2 25 ± 0.5 L L = 400 mm + 15/- 0 Other wire lengths or connector attached available on request. DERATING Power derating curve. P (%) 100 0 - 40 0 55 85 125 Tamb (°C) Note • Zero power is considered as measuring power max. 1 % of max. power Revision: 24-Aug-17 Document Number: 29060 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 NTCLE400, NTCLS100, NTCLP100 www.vishay.com Vishay BCcomponents RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R25 AT 2.2 k, 4.7 k, 5.0 k , AND 10 k PART NR. NTCL**00E3222H PART NR. NTCL**00E3472H PART NR. NTCL**00E3502H PART NR. NTCL**00E3103H RT () RT () RT () RT () -40 73 061 156 084 166 047 -35 52 778 112 753 -30 38 544 -25 R-TOL. (± %) (%/K) T-TOL. (± °C) 332 094 5.87 -6.62 0.89 119 950 239 900 5.60 -6.39 0.88 82 344 87 600 175 200 5.33 -6.18 0.86 28 443 60 765 64 643 129 287 5.08 -5.98 0.85 -20 21 199 45 288 48 179 96 358 4.83 -5.78 0.84 -15 15 950 34 075 36 250 72 500 4.60 -5.60 0.82 -10 12 110 25 872 27 523 55 046 4.37 -5.42 0.81 -5 9275 19 814 21 078 42 157 4.15 -5.25 0.79 0 7162 15 300 16 277 32 554 3.94 -5.09 0.77 5 5574 11 909 12 669 25 339 3.74 -4.93 0.76 10 4372 9340 9936 19 872 3.55 -4.79 0.74 15 3454 7378 7849 15 698 3.36 -4.64 0.72 20 2747 5869 6244 12 488 3.18 -4.51 0.70 25 2200 4700 5000 10 000 3.00 -4.38 0.69 30 1773 3788 4030 8059 3.17 -4.25 0.75 35 1438 3071 3267 6535 3.33 -4.13 0.81 40 1173 2505 2665 5330 3.49 -4.02 0.87 45 961.8 2055 2186 4372 3.65 -3.91 0.93 50 793.2 1694 1803 3605 3.80 -3.80 1.00 55 657.5 1405 1494 2989 3.94 -3.70 1.07 60 547.8 1170 1245 2490 4.08 -3.60 1.13 65 458.6 979.7 1042 2084 4.22 -3.51 1.20 70 385.7 823.9 876.5 1753 4.35 -3.42 1.27 75 325.8 696.0 740.5 1481 4.48 -3.33 1.35 80 276.4 590.5 628.2 1256 4.60 -3.25 1.42 85 235.5 503.0 585.2 1070 4.73 -3.17 1.49 TOPER (°C) Revision: 24-Aug-17 Document Number: 29060 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 NTCLE400, NTCLS100, NTCLP100 www.vishay.com Vishay BCcomponents RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R25 AT 47 k TOPER (°C) PART NR. NTCL**00E3473H RT () R-TOL. (± %) (%/K) T-TOL. (± °C) -40 1 589 068 8.91 -6.54 1.36 -35 1 151 627 8.34 -6.34 1.32 -30 842 790 7.79 -6.15 1.27 -25 622 597 7.27 -5.96 1.22 -20 464 110 6.77 -5.79 1.17 -15 348 989 6.28 -5.62 1.12 -10 264 628 5.82 -5.45 1.07 -5 202 280 5.37 -5.30 1.01 0 155 823 4.94 -5.14 0.96 5 120 932 4.52 -5.00 0.91 10 94 528 4.12 -4.86 0.85 15 74 399 3.74 -4.72 0.79 20 58 945 3.36 -4.59 0.73 25 47 000 3.00 -4.47 0.67 30 37 706 3.35 -4.35 0.77 35 30 429 3.69 -4.23 0.87 40 24 696 4.02 -4.12 0.97 45 20 154 4.33 -4.01 1.08 50 16 534 4.64 -3.91 1.19 55 13 633 4.94 -3.81 1.30 60 11 296 5.23 -3.71 1.41 65 9404 5.51 -3.62 1.52 70 7865 5.78 -3.53 1.64 75 6607 6.04 -3.44 1.75 80 5573 6.30 -3.36 1.87 85 4721 6.55 -3.28 2.00 Revision: 24-Aug-17 Document Number: 29060 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 NTCLE400, NTCLS100, NTCLP100 www.vishay.com Vishay BCcomponents RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R25 AT 100 k PART NR. NTCL**00E3104H TOPER (°C) RT () R-TOL. (± %) (%/K) T-TOL. (± °C) -40 3 666 299 9.05 -6.69 1.35 -35 2 637 588 8.47 -6.49 1.31 -30 1 916 576 7.91 -6.29 1.26 -25 1 406 111 7.37 -6.10 1.21 -20 1 041 184 6.86 -5.92 1.16 -15 777 846 6.36 -5.75 1.11 -10 586 097 5.89 -5.58 1.06 -5 445 257 5.43 -5.42 1.00 0 340 942 4.99 -5.26 0.95 5 263 054 4.56 -5.11 0.89 10 204 446 4.15 -4.97 0.84 15 160 014 3.75 -4.83 0.78 20 126 087 3.37 -4.70 0.72 25 100 000 3.00 -4.57 0.66 30 79 808 3.36 -4.45 0.75 35 64 077 3.70 -4.33 0.86 40 51 745 4.04 -4.22 0.96 45 42 021 4.36 -4.11 1.06 50 34 308 4.68 -4.00 1.17 55 28 156 4.98 -3.90 1.28 60 23 222 5.28 -3.80 1.39 65 19 246 5.57 -3.71 1.50 70 16 025 5.85 -3.62 1.62 75 13 402 6.12 -3.53 1.73 80 11 258 6.38 -3.45 1.85 85 9496 6.64 -3.36 1.97 TESTS AND REQUIREMENTS STABILITY TESTS IEC TEST PROCEDURE DRIFT REQUIREMENT R/R < 5 % 60068-2-2 Endurance dry heat 85 °C; 1000 h 60068-2-1 Endurance cold -40 °C; 1000 h R/R < 5 % Endurance max. dissipation 250 mW; 55 °C; 1000 h R/R < 5 % Damp heat, steady state 56 days at 40 °C; 90 % to 95 % RH R/R < 7 % -40 °C to +85 °C; 50 cycles Rapid change of temperature R/R < 5 % 60539 60068-2-3 60068-20-14 Revision: 24-Aug-17 Document Number: 29060 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000