ON NTNS3A65PZ Â 20 v, â 281 ma, single pâ channel, sotâ 883 (xdfn3) 1.0 x 0.6 x 0.4 mm package Datasheet

NTNS3A65PZ
Small Signal MOSFET
−20 V, −281 mA, Single P−Channel,
SOT−883 (XDFN3) 1.0 x 0.6 x 0.4 mm
Package
http://onsemi.com
Features
• Single P−Channel MOSFET
• Ultra Low Profile SOT−883 (XDFN3) 1.0 x 0.6 x 0.4 mm for
•
•
•
Extremely Thin Environments Such as Portable Electronics
Low RDS(on) Solution in the Ultra Small 1.0 x 0.6 mm Package
1.5 V Gate Drive
These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
V(BR)DSS
RDS(on) MAX
ID Max
1.3 W @ −4.5 V
2.0 W @ −2.5 V
−20 V
−281 mA
3.4 W @ −1.8 V
4.5 W @ −1.5 V
Applications
• High Side Switch
• High Speed Interfacing
• Optimized for Power Management in Ultra Portable Solutions
P−CHANNEL MOSFET
S (2)
MAXIMUM RATINGS (TJ = 25°C unless otherwise stated)
Parameter
Symbol
Value
Unit
Drain−to−Source Voltage
VDSS
−20
V
Gate−to−Source Voltage
VGS
±8
V
ID
−281
mA
Continuous Drain
Current (Note 1)
Steady
State
TA = 25°C
t≤5s
TA = 25°C
Power Dissipation
(Note 1)
Steady
State
TA = 25°C
TA = 85°C
−202
−332
PD
t≤5s
Pulsed Drain
Current
218
−842
mA
TJ, TSTG
−55 to
150
°C
Source Current (Body Diode) (Note 2)
IS
−130
mA
Lead Temperature for Soldering Purposes
(1/8” from case for 10 s)
TL
260
°C
Operating Junction and Storage
Temperature
D (3)
mW
155
IDM
tp = 10 ms
G (1)
MARKING
DIAGRAM
3
2
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
1. Surface−mounted on FR4 board using the minimum recommended pad size,
or 2 mm2, 1 oz Cu.
2. Pulse Test: pulse width ≤ 300 ms, duty cycle ≤ 2%
1
SOT−883 (XDFN3)
CASE 506CB
65
M
65 M
= Specific Device Code
= Date Code
ORDERING INFORMATION
Device
Package
Shipping†
NTNS3A65PZT5G
SOT−883
(Pb−Free)
8000 / Tape &
Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2012
September, 2012 − Rev. 0
1
Publication Order Number:
NTNS3A65PZ/D
NTNS3A65PZ
THERMAL RESISTANCE RATINGS
Symbol
Max
Junction−to−Ambient – Steady State (Note 3)
Parameter
RθJA
804
Junction−to−Ambient – t ≤ 5 s (Note 3)
RθJA
574
Unit
°C/W
3. Surface−mounted on FR4 board using the minimum recommended pad size, or 2 mm2, 1 oz Cu.
ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise stated)
Parameter
Symbol
Test Condition
Min
Drain−to−Source Breakdown Voltage
V(BR)DSS
VGS = 0 V, ID = −250 mA
−20
Drain−to−Source Breakdown Voltage
Temperature Coefficient
V(BR)DSS/
TJ
Typ
Max
Unit
OFF CHARACTERISTICS
ID = −250 mA, ref to 25°C
Zero Gate Voltage Drain Current
IDSS
VGS = 0 V,
VDS = −20 V
Gate−to−Source Leakage Current
IGSS
VDS = 0 V, VGS = ±5 V
VGS(TH)
VGS = VDS, ID = −250 mA
V
11
TJ = 25°C
mV/°C
−1
mA
±10
mA
−1.0
V
ON CHARACTERISTICS (Note 4)
Gate Threshold Voltage
Negative Threshold Temperature
Coefficient
Drain−to−Source On Resistance
VGS(TH)/TJ
RDS(on)
−0.4
2.2
mV/°C
VGS = −4.5 V, ID = −200 mA
0.9
1.3
VGS = −2.5 V, ID = −100 mA
1.3
2.0
VGS = −1.8 V, ID = −50 mA
1.8
3.4
VGS= −1.5 V, ID = −10 mA
2.3
4.5
Forward Transconductance
gFS
VDS = −5 V, ID = −200 mA
0.58
Source−Drain Diode Voltage
VSD
VGS = 0 V, IS = −100 mA
−0.8
VGS = 0 V, freq = 1 MHz, VDS = −10 V
W
W
S
−1.2
V
CHARGES & CAPACITANCES
Input Capacitance
CISS
44
Output Capacitance
COSS
6.7
Reverse Transfer Capacitance
CRSS
5.5
Total Gate Charge
QG(TOT)
1.1
Threshold Gate Charge
QG(TH)
Gate−to−Source Charge
QGS
Gate−to−Drain Charge
QGD
VGS = −4.5 V, VDS = −10 V;
ID = −200 mA
0.1
0.2
pF
nC
0.2
SWITCHING CHARACTERISTICS, VGS = 4.5 V (Note 4)
Turn−On Delay Time
Rise Time
Turn−Off Delay Time
Fall Time
td(ON)
tr
td(OFF)
18
VGS = −4.5 V, VDD = −10 V,
ID = −200 mA, RG = 2 W
tf
32
178
84
4. Switching characteristics are independent of operating junction temperatures
http://onsemi.com
2
ns
NTNS3A65PZ
TYPICAL CHARACTERISTICS
1.0
−4.0 V
0.7
−3.5 V
0.6
−2 V
−3 V
0.5
−1.8 V
0.4
0.3
−1.5 V
0.2
0.1
RDS(on), DRAIN−TO−SOURCE RESISTANCE (W)
0.0
0.5
1.0
1.5
2.0
2.5
TJ = 25°C
0.6
0.5
TJ = −55°C
0.4
0.3
0.2
0
1
1.5
2
2.5
−VDS, DRAIN−TO−SOURCE VOLTAGE (V)
−VGS, GATE−TO−SOURCE VOLTAGE (V)
Figure 2. Transfer Characteristics
TJ = 25°C
ID = −200 mA
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
1.5
2.0
2.5
3.0
3.5
4.0
4.5
−VGS, GATE−TO−SOURCE VOLTAGE (V)
3
5.0
TJ = 25°C
4.5
VGS = −1.5 V
4.0
3.5
3.0
VGS = −1.8 V
2.5
VGS = −2.5 V
2.0
1.5
VGS = −4.5 V
1.0
0.5
0.0
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
−ID, DRAIN CURRENT (A)
Figure 3. On−Resistance vs. Gate Voltage
Figure 4. On−Resistance vs. Drain Current and
Gate Voltage
1.6
1000
VGS = 0 V
1.5
TJ = 125°C
VGS = −4.5 V
ID = −200 mA
1.4
−IDSS, LEAKAGE (nA)
RDS(on), DRAIN−TO−SOURCE RESISTANCE (NORMALIZED)
0.5
Figure 1. On−Region Characteristics
4.5
1.0
TJ = 125°C
0.7
0.0
3.0
5.0
0.0
0.8
0.1
−1.2 V
0.0
VDS = −5 V
0.9
−ID, DRAIN CURRENT (A)
0.8
−2.5 V
RDS(on), DRAIN−TO−SOURCE RESISTANCE (W)
−ID, DRAIN CURRENT (A)
1.0
TJ = 25°C
VGS = −4.5
0.9
1.3
1.2
VGS = −1.8 V
ID = −50 mA
1.1
1.0
0.9
100
TJ = 85°C
0.8
0.7
−50
−25
0
25
50
75
100
125
150
10
2
4
6
8
10
12
14
16
18
TJ, JUNCTION TEMPERATURE (°C)
−VDS, DRAIN−TO−SOURCE VOLTAGE (V)
Figure 5. On−Resistance Variation with
Temperature
Figure 6. Drain−to−Source Leakage Current
vs. Voltage
http://onsemi.com
3
20
NTNS3A65PZ
C, CAPACITANCE (pF)
TJ = 25°C
VGS = 0 V
f = 1 MHz
Ciss
Coss
Crss
0
2
4
6
8
10
12
14
16
18
20
10
4
VGS
VDS
8
3
6
2
Qgs
Qgd
4
VDS = −10 V
ID = −0.2 V
TJ = 25°C
1
0
0
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
2
0
1.1 1.2
Qg, TOTAL GATE CHARGE (nC)
Figure 7. Capacitance Variation
Figure 8. Gate−to−Source Voltage vs. Total
Charge
10.0
−IS, SOURCE CURRENT (A)
VDD = −10 V
VGS = −4.5 V
td(off)
t, TIME (ns)
12
QT
−VDS, DRAIN−TO−SOURCE VOLTAGE (V)
1000
100
tf
tr
td(on)
10
5
−VDS, DRAIN−TO−SOURCE VOLTAGE (V)
80
75
70
65
60
55
50
45
40
35
30
25
20
15
10
5
0
−VGS, GATE−TO−SOURCE VOLTAGE (V)
TYPICAL CHARACTERISTICS
1
10
RG, GATE RESISTANCE (W)
1.0
TJ = −55°C
0.1
100
TJ = 125°C
TJ = 25°C
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
−VSD, SOURCE−TO−DRAIN VOLTAGE (V)
Figure 9. Resistive Switching Time Variation
vs. Gate Resistance
Figure 10. Diode Forward Voltage vs. Current
1.000
0.90
10 ms
−ID, DRAIN CURRENT (A)
0.80
−VGS(th) (V)
ID = −250 mA
0.70
0.60
0.50
0.40
−50
100 ms
10 ms
150
VGS ≤ −8 V
Single Pulse
TC = 25°C
0.010
0.001
−25
0
25
50
75
100
125
TJ, STARTING JUNCTION TEMPERATURE (°C)
1 ms
0.100
dc
RDS(on) Limit
Thermal Limit
Package Limit
0.1
1
10
−VDS, DRAIN−TO−SOURCE VOLTAGE (V)
Figure 11. Threshold Voltage
Figure 12. Maximum Rated Forward Biased
Safe Operating Area
http://onsemi.com
4
100
NTNS3A65PZ
R(t) (°C/W) EFFECTIVE TRANSIENT
THERMAL RESISTANCE
TYPICAL CHARACTERISTICS
900
RqJA steady state = 804°C/W
800
700
600
500
Duty Cycle = 0.5
400
300
0.01 0.02
200
0.2
100
0.1
0
0.000001
0.05
Single Pulse
0.00001
0.0001
0.001
0.01
0.1
PULSE TIME (sec)
Figure 13. Thermal Response
http://onsemi.com
5
1
10
100
1000
NTNS3A65PZ
PACKAGE DIMENSIONS
SOT−883 (XDFN3), 1.0x0.6, 0.35P
CASE 506CB
ISSUE A
PIN ONE
REFERENCE
0.10 C
ÉÉÉ
0.10 C
E
DIM
A
A1
b
D
D2
e
E
E2
L
TOP VIEW
NOTE 3
0.10 C
0.10 C
3X
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. EXPOSED COPPER ALLOWED AS SHOWN.
A B
D
A1
SIDE VIEW
A
C
SEATING
PLANE
RECOMMENDED
SOLDER FOOTPRINT*
1.10
D2
2X
E2
e/2
1
e
0.10
M
b
C A B
0.05
M
C
2X
3X
MILLIMETERS
MIN
MAX
0.340 0.440
0.000 0.030
0.075 0.200
0.950 1.075
0.620 BSC
0.350 BSC
0.550 0.675
0.425 0.550
0.170 0.300
L
2X
0.41
0.43
1
0.55
0.20
PACKAGE
OUTLINE
DIMENSIONS: MILLIMETERS
BOTTOM VIEW
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks,
copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC
reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any
particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without
limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications
and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC
does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for
surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where
personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and
its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly,
any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture
of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
http://onsemi.com
6
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
NTNS3A65PZ/D
Similar pages