ON NVTFS5811NL Power mosfet Datasheet

NVTFS5811NL
Power MOSFET
40 V, 6.7 mW, 40 A, Single N−Channel
Features
•
•
•
•
•
•
Small Footprint (3.3 x 3.3 mm) for Compact Design
Low RDS(on) to Minimize Conduction Losses
Low Capacitance to Minimize Driver Losses
NVTFS5811NLWF − Wettable Flanks Product
AEC−Q101 Qualified and PPAP Capable
These Devices are Pb−Free and are RoHS Compliant
http://onsemi.com
V(BR)DSS
RDS(on) MAX
6.7 mW @ 10 V
40 V
10 mW @ 4.5 V
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted)
Symbol
Value
Unit
Drain−to−Source Voltage
VDSS
40
V
Gate−to−Source Voltage
VGS
±20
V
ID
40
A
Parameter
Continuous Drain Current RYJ−mb (Notes 1,
2, 3, 4)
Power Dissipation
RYJ−mb (Notes 1, 2, 3)
Continuous Drain Current RqJA (Notes 1 &
3, 4)
Power Dissipation
RqJA (Notes 1, 3)
Pulsed Drain Current
Tmb = 25°C
Steady
State
Tmb = 100°C
Tmb = 25°C
28
PD
Tmb = 100°C
TA = 25°C
Steady
State
ID
Operating Junction and Storage Temperature
Source Current (Body Diode)
Single Pulse Drain−to−Source Avalanche
Energy (TJ = 25°C, VDD = 50 V, VGS = 10 V,
IL(pk) = 36 A, L = 1.0 mH, RG = 25 W)
Lead Temperature for Soldering Purposes
(1/8″ from case for 10 s)
S (1,2,3)
W
3.2
1.6
IDM
354
A
TJ, Tstg
−55 to
+175
°C
IS
17
A
EAS
65
mJ
TL
260
°C
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
THERMAL RESISTANCE MAXIMUM RATINGS (Note 1)
Parameter
Junction−to−Mounting Board (top) − Steady
State (Note 2 and 3)
Junction−to−Ambient − Steady State (Note 3)
G (4)
MARKING DIAGRAM
11
TA = 100°C
TA = 25°C, tp = 10 ms
D (5−8)
A
16
PD
40 A
N−Channel MOSFET
10
TA = 100°C
TA = 25°C
W
21
ID MAX
Symbol
Value
Unit
RYJ−mb
7.2
°C/W
RqJA
47
1
WDFN8
(m8FL)
CASE 511AB
XXXX
A
Y
WW
G
1
S
S
S
G
XXXX
AYWWG
G
D
D
D
D
= Specific Device Code
= Assembly Location
= Year
= Work Week
= Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering, marking and shipping information in the
package dimensions section on page 5 of this data sheet.
1. The entire application environment impacts the thermal resistance values shown,
they are not constants and are only valid for the particular conditions noted.
2. Psi (Y) is used as required per JESD51−12 for packages in which
substantially less than 100% of the heat flows to single case surface.
3. Surface−mounted on FR4 board using a 650 mm2, 2 oz. Cu pad.
4. Continuous DC current rating. Maximum current for pulses as long as 1
second is higher but is dependent on pulse duration and duty cycle.
© Semiconductor Components Industries, LLC, 2013
May, 2013 − Rev. 2
1
Publication Order Number:
NVTFS5811NL/D
NVTFS5811NL
ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise noted)
Parameter
Symbol
Test Condition
Min
V(BR)DSS
VGS = 0 V, ID = 250 mA
40
Typ
Max
Unit
OFF CHARACTERISTICS
Drain−to−Source Breakdown Voltage
Zero Gate Voltage Drain Current
IDSS
Gate−to−Source Leakage Current
VGS = 0 V,
VDS = 40 V
V
TJ = 25°C
1.0
TJ = 125°C
10
mA
IGSS
VDS = 0 V, VGS = "20 V
Gate Threshold Voltage
VGS(TH)
VGS = VDS, ID = 250 mA
2.2
V
Drain−to−Source On Resistance
RDS(on)
VGS = 10 V, ID = 20 A
5.8
6.7
mW
VGS = 4.5 V, ID = 20 A
8.8
10
gFS
VDS = 5 V, ID = 10 A
24.6
S
Input Capacitance
Ciss
1570
pF
Output Capacitance
Coss
VGS = 0 V, f = 1.0 MHz,
VDS = 25 V
"100
nA
ON CHARACTERISTICS (Note 5)
Forward Transconductance
1.5
CHARGES AND CAPACITANCES
Reverse Transfer Capacitance
215
Crss
157
Total Gate Charge
QG(TOT)
17
nC
Threshold Gate Charge
QG(TH)
1
nC
Gate−to−Source Charge
QGS
Gate−to−Drain Charge
QGD
Total Gate Charge
QG(TOT)
VGS = 4.5 V, VDS = 32 V, ID = 20 A,
RG = 2.5 W
5
9
VGS = 10 V, VDS = 32 V, ID = 20 A
30
nC
11
ns
SWITCHING CHARACTERISTICS (Note 6)
Turn−On Delay Time
Rise Time
Turn−Off Delay Time
Fall Time
td(on)
tr
td(off)
VGS = 4.5 V, VDS = 32 V,
ID = 20 A, RG = 2.5 W
tf
55
20
40
DRAIN−SOURCE DIODE CHARACTERISTICS
Forward Diode Voltage
Reverse Recovery Time
VSD
TJ = 25°C
0.83
TJ = 125°C
0.70
tRR
Charge Time
ta
Discharge Time
tb
Reverse Recovery Charge
VGS = 0 V,
IS = 20 A
22
VGS = 0 V, dIS/dt = 100 A/ms,
IS = 20 A
QRR
http://onsemi.com
2
V
ns
12
10
17
5. Pulse Test: Pulse Width ≤ 300 ms, Duty Cycle ≤ 2%.
6. Switching characteristics are independent of operating junction temperatures.
1.2
nC
NVTFS5811NL
TYPICAL CHARACTERISTICS
ID, DRAIN CURRENT (A)
80
4.0 V
60
3.8 V
50
3.6 V
40
30
3.4 V
20
3.2 V
10
0
1
2
3
4
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
60
50
40
30
TJ = 25°C
20
0
5
1
2
3
4
VGS, GATE−TO−SOURCE VOLTAGE (V)
0.016
ID = 20 A
TJ = 25°C
0.012
0.010
0.008
0.006
0.004
2
4
6
10
8
VGS, GATE−TO−SOURCE VOLTAGE (V)
0.012
TJ = 25°C
0.010
VGS = 10 V
0.006
0.004
0.002
5
10 15 20 25 30 35 40 45 50 55 60 65 70
ID, DRAIN CURRENT (A)
Figure 4. On−Resistance vs. Drain Current and
Gate Voltage
100000
2.00
VGS = 0 V
ID = 20 A
VGS = 10 V
IDSS, LEAKAGE (nA)
RDS(on), DRAIN−TO−SOURCE
RESISTANCE (NORMALIZED)
VGS = 4.5 V
0.008
Figure 3. On−Resistance vs. Gate−to−Source
Voltage
1.80
5
Figure 2. Transfer Characteristics
RDS(on), DRAIN−TO−SOURCE RESISTANCE (W)
RDS(on), DRAIN−TO−SOURCE RESISTANCE (W)
Figure 1. On−Region Characteristics
0.014
TJ = −55°C
TJ = 125°C
10
3.0 V
0
VDS ≥ 10 V
70
4.2 V
VGS = 5 V
70
80
TJ = 25°C
4.6 V
10 V
90
ID, DRAIN CURRENT (A)
100
1.60
10000
1.40
1.20
1.00
TJ = 150°C
TJ = 125°C
1000
0.80
0.60
−50
−25
0
25
50
75
100
125
150
175
100
10
20
30
TJ, JUNCTION TEMPERATURE (°C)
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
Figure 5. On−Resistance Variation with
Temperature
Figure 6. Drain−to−Source Leakage Current
vs. Voltage
http://onsemi.com
3
40
NVTFS5811NL
TYPICAL CHARACTERISTICS
10
2000
VGS = 0 V
1800
C, CAPACITANCE (pF)
VGS, GATE−TO−SOURCE VOLTAGE
(V)
2200
TJ = 25°C
Ciss
1600
1400
1200
1000
800
600
400
Coss
200
0
Crss
0
10
20
30
DRAIN−TO−SOURCE VOLTAGE (V)
40
QT
8
6
4
Qgs
2
0
VDS = 32 V
ID = 20 A
TJ = 25°C
0
5
Figure 7. Capacitance Variation
IS, SOURCE CURRENT (A)
t, TIME (ns)
100
tr
tf
td(off)
10
td(on)
1
10
RG, GATE RESISTANCE (W)
100
40
30
20
10
0
0.5
10 ms
100 ms
1 ms
10 ms
RDS(on) Limit
Thermal Limit
Package Limit
0.1
dc
1
10
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
EAS, SINGLE PULSE DRAIN−TO−
SOURCE AVALANCHE ENERGY (mJ)
ID, DRAIN CURRENT (A)
VGS = 10 V
Single Pulse
TC = 25°C
10
0.6
0.7
0.8
0.9
VSD, SOURCE−TO−DRAIN VOLTAGE (V)
1.0
Figure 10. Diode Forward Voltage vs. Current
1000
0.1
30
VGS = 0 V
TJ = 25°C
50
Figure 9. Resistive Switching Time Variation
vs. Gate Resistance
1
25
60
VDD = 32 V
ID = 20 A
VGS = 4.5 V
100
10
15
20
Qg, TOTAL GATE CHARGE (nC)
Figure 8. Gate−to−Source Voltage vs. Total
Charge
1000
1.0
Qgd
100
60
ID = 36 A
50
40
30
20
10
0
25
Figure 11. Maximum Rated Forward Biased
Safe Operating Area
50
75
100
125
150
TJ, STARTING JUNCTION TEMPERATURE (°C)
Figure 12. Maximum Avalanche Energy vs.
Starting Junction Temperature
http://onsemi.com
4
175
NVTFS5811NL
TYPICAL CHARACTERISTICS
RqJA(t) (°C/W) EFFECTIVE TRANSIENT
THERMAL RESISTANCE
100
Duty Cycle = 0.5
10
1
0.2
0.1
0.05
0.02
0.01
0.1
0.01
0.000001
Single Pulse
0.00001
0.0001
0.001
0.01
0.1
PULSE TIME (sec)
1
10
100
1000
Figure 13. Thermal Response
DEVICE ORDERING INFORMATION
Marking
Package
Shipping†
NVTFS5811NLTAG
5811
WDFN8
(Pb−Free)
1500 / Tape & Reel
NVTFS5811NLWFTAG
11LW
WDFN8
(Pb−Free)
1500 / Tape & Reel
NVTFS5811NLTWG
5811
WDFN8
(Pb−Free)
5000 / Tape & Reel
NVTFS5811NLWFTWG
11LW
WDFN8
(Pb−Free)
5000 / Tape & Reel
Device
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
http://onsemi.com
5
NVTFS5811NL
PACKAGE DIMENSIONS
WDFN8 3.3x3.3, 0.65P
CASE 511AB
ISSUE D
2X
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DIMENSION D1 AND E1 DO NOT INCLUDE MOLD FLASH
PROTRUSIONS OR GATE BURRS.
0.20 C
D
A
D1
B
2X
0.20 C
8 7 6 5
4X
E1 E
q
c
1 2 3 4
A1
TOP VIEW
0.10 C
A
e
SIDE VIEW
0.10
8X b
C A B
0.05
C
4X
L
C
6X
0.10 C
DETAIL A
SEATING
PLANE
DETAIL A
8X
e/2
1
0.42
4
INCHES
NOM
0.030
−−−
0.012
0.008
0.130 BSC
0.116
0.120
0.078
0.083
0.130 BSC
0.116
0.120
0.058
0.063
0.009
0.012
0.026 BSC
0.012
0.016
0.026
0.032
0.012
0.017
0.002
0.005
0.055
0.059
0_
−−−
MIN
0.028
0.000
0.009
0.006
MAX
0.031
0.002
0.016
0.010
0.124
0.088
0.124
0.068
0.016
0.020
0.037
0.022
0.008
0.063
12 _
0.65
PITCH
PACKAGE
OUTLINE
4X
0.66
M
E3
8
G
MILLIMETERS
MIN
NOM
MAX
0.70
0.75
0.80
0.00
−−−
0.05
0.23
0.30
0.40
0.15
0.20
0.25
3.30 BSC
2.95
3.05
3.15
1.98
2.11
2.24
3.30 BSC
2.95
3.05
3.15
1.47
1.60
1.73
0.23
0.30
0.40
0.65 BSC
0.30
0.41
0.51
0.65
0.80
0.95
0.30
0.43
0.56
0.06
0.13
0.20
1.40
1.50
1.60
0_
−−−
12 _
SOLDERING FOOTPRINT*
K
E2
DIM
A
A1
b
c
D
D1
D2
E
E1
E2
E3
e
G
K
L
L1
M
q
5
D2
BOTTOM VIEW
3.60
L1
0.75
2.30
0.57
0.47
2.37
3.46
DIMENSION: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks,
copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC
reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any
particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without
limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications
and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC
does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for
surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where
personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and
its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly,
any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture
of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
http://onsemi.com
6
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
NVTFS5811NL/D
Similar pages