OKI OD9602N 3.3-v photo diode preamp module Datasheet

DATA SHEET
O
K
I
L
A
S
E
R
P
R
O
D
U
C
T
S
OD9601N (1.25 Gbps)
OD9602N (622 Mbps)
OD9604N (2.488 Gbps)
+ 3.3-V Photo Diode Preamp Modules
February 2000
■ ■ –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
CONTENTS
OD9601N, OD9602N, and OD9604 Photo Diode Preamp Module Family ..................... 1
OD9601N ...................................................................................................................................... 3
OD9602N ...................................................................................................................................... 7
OD9604N .................................................................................................................................... 11
Oki Semiconductor
OD9601N, OD9602N, and OD9604
Photo Diode Preamp Module Family
InGaAs Technology (+ 3.3 V)
INTRODUCTION
Oki Semiconductor’s OD9601N, OD9602N, and OD9604N PD Preamp Module Family are surface-mount
1.3-µm, InGaAs PIN photo diodes combined with a transimpedance amplifier. The OD9601N operates at
1.25 Gbps in STM4/OC12/OC24 environments. The OD9602N operates at 622 Mbps in STM4/OC12
environments. The OD9604N operates at 2.488 Gbps in STM16/OC48 environments.
The OD9601N, OD9602N, and OD9604N use a single + 3.3-V power supply, provide a differential output
signal, and are available in an 8-pin Mini-Dil package. These photo diode preamp modules are coupled
to a single-mode fiber with a pigtail.
GENERAL FEATURES
• Surface-mount Mini-Dil package
• Low cost
• Operating Performance:
- OD9601N
- OD9602N
- OD9604N
1.25 Gbps operation
622 Mbps operation
2.488 Gbps operation
• Peak-sensitivity wavelength: 1300 nm
GENERAL APPLICATION
• Optical transmission systems
- OD9601N
1.25 Mbps, STM4/OC12/OC24
- OD9602N
622 Mbps, STM4/OC12
- OD9604N
2.488 Gbps, STM16/OC48
• Optical transmission modules (receiver section)
• Optical receivers
• Inter-office interconnection
• Gigabit Ethernet (OD9601N / OD9604N)
• Ethernet (OD9602N)
Oki Semiconductor
1
■ OD9601N, OD9602N, and OD9604 Photo Diode Preamp Module Family ■ ––––––––––––––––––––––––––––––––
Notes
2
Oki Semiconductor
OD9601N Photo Diode Preamp Module
1.25-Gbps InGaAs Technology (+ 3.3 V)
INTRODUCTION
Oki Semiconductor’s OD9601N PD Preamp Module is a surface-mount 1.3-µm, InGaAs PIN photo diode
combined with a transimpedance amplifier. This OD9601N is designed to operate at 1.25 Gbps in
STM4/OC12/OC24 environments. This photo diode uses a single + 3.3-V power supply and provides a
differential output signal. It is available in an 8-pin Mini-Dil package and is coupled to a single-mode
fiber with a pigtail.
FEATURES
•
•
•
•
Surface-mount Mini-Dil package
Low cost
1.25 Gbps operation
Peak-sensitivity wavelength: 1300 nm
APPLICATION
•
•
•
•
Optical transmission modules (receiver section)
Optical receivers
Inter-office interconnection
Gigabit Ethernet
Oki Semiconductor
3
■ OD9601N Photo Diode Preamp Module ■ ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
ELECTRICAL CHARACTERISTICS
Absolute Maximum Ratings (ambient temperature Ta=25°C unless otherwise noted)
Parameter
Supply Voltage
Symbol
Ratings
Units
Vs
6
mW
dBm
Incident Optical Power
PIOP
-3
Operating Case Temperature
Topr
- 40 to + 85
°C
Storage Temperature
Tstg
- 40 to + 85
°C
Soldering Profile
Tsol
230 (30)
°C (sec)
Exceeding these maximum ratings could cause immediate damage or lead to permanent deterioration of the device.
Optical and Electrical Characteristics
(Ta=25°C, VCC=3.3 V, λ=1310 nm unless otherwise noted)
Test Conditions
Min.
Typ.
Max.
Supply Voltage
-
+3.0
+3.3
+3.6
V
Supply Current
-
-
26
50
mA
-3 dBm
Pin= -22 dBm, fr = 50 MHz
-
44
-
kHz
20% to 80%
Pin= -3 dBm
-
-
300
ps
BER < 10 -12 (See note 1)
-
-28
-
dBm
Parameter
Low Frequency Cutoff
Rise / Fall Time
Sensitivity
Differential Output Voltage
Pin= -3 dBm
185
250
415
mV
-3 dBm
Pin= - 22 dBm, fr = 50 MHz
750
820
1100
MHz
Differential, measured with -22 dBm input signal
2.7
3.4
4.1
kV / W
BW=1500 MHz, Pin=0 mW
-
0.23
-
µW
Optical Modulation Bandwidth
Differential Responsivity
Input Noise Equivalent Optical Power
Notes:
Data rate: 1.25 Gbps. Data sequence: PRBS 2 23 -1.
Contact Oki Semiconductor sales office for reliability report.
Connector and Fiber Specifications
Connector
Fiber
4
FC-PC, SC-PC, MUJ-PC etc
1.31-µm single-mode fiber
Diameter: 0.9 mm
Color: Dark blue
Bending Radius: 20 mm (minimum)
Heat resistant
Length: Options (contact Oki Semiconductor)
Oki Semiconductor
Units
––––––––––––––––––––––––––––––––––––––––––––––––––––––––– ■ OD9601N Photo Diode Preamp Module ■
PACKAGE DIMENSIONS
(Units: mm)
2.5
2.5
11.2
5
8
5.6
(TOP VIEW)
1.0
1.8
7.62
R1
1
4
2.54 x 3
1.75
0.46
0.17
3 max
0.25
Pin Configuration
Pin No.
Description
Pin No.
Description
01
VCC
05
Output (+)
02
GND
06
NC
03
GND
07
NC
04
Output (-)
08
GND
Oki Semiconductor
5
■ OD9601N Photo Diode Preamp Module ■ ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Notes:
6
Oki Semiconductor
OD9602N Photo Diode Preamp Module
622 Mbps InGaAs Technology (+ 3.3 V)
introduction
Oki Semiconductor’s OD9602N PD Preamp Module is a surface-mount 1.3-µm, InGaAs PIN photo diode
combined with a transimpedance amplifier. This OD9602N is designed to operate at 622 Mbps in
STM4/OC12 environments. This photo diode uses a single + 3.3-V power supply and provides a differential output signal. It is available in an 8-pin Mini-Dil package and is coupled to a single-mode fiber
with a pigtail.
FEATURES
•
•
•
•
Surface-mount Mini-Dil package
Low cost
622 Mbps operation
Peak-sensitivity wavelength: 1300 nm
APPLICATION
•
•
•
•
Optical transmission modules (receiver section)
Optical receivers
Inter-office interconnect
Ethernet
Oki Semiconductor
7
■ OD9602N Photo Diode Preamp Module ■ ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
ELECTICAL CHARACTERISTICS
Absolute Maximum Ratings (ambient temperature Ta=25°C unless otherwise noted)
Parameter
Supply Voltage
Symbol
Ratings
Units
Vs
5.5
V
Incident Optical Power
PIOP
4
dBm
Operating Case Temperature
Topr
- 40 to + 85
°C
Storage Temperature
Tstg
- 40 to + 85
°C
Soldering Profile
Tsol
230 (30)
°C (sec)
Exceeding these maximum ratings could cause immediate damage or lead to permanent deterioration of the device
Optical and Electrical Characteristics
(Ta=25°C, VCC=3.3 V, λ=1310 nm unless otherwise noted)
Test Conditions
Min.
Typ.
Max.
Supply Voltage
-
+3.0
+3.3
+3.6
V
Supply Current
-
12
25
35
mA
Low Frequency Cutoff
-3 dBm
Pin= -23 dBm, fr = 50 MHz
-
-
150
kHz
Sensitivity
BER < 10 -10 (See note 1)
-
-33.2
-
dBm
Pin= -3 dBm
-
-
950
mV
-3 dBm
Pin= - 22 dBm, fr = 50 MHz
450
590
-
MHz
Differential, measured with -22 dBm input signal
3.7
-
6.8
kV / W
Parameter
Differential Output Voltage
Optical Modulation Bandwidth
Differential Responsivity
Notes:
Data rate: 1.25 Gbps. Data sequence: PRBS 2 23 -1.
Contact Oki Semiconductor sales office for reliability report.
Connector and Fiber Specifications
Connector
Fiber
8
FC-PC, SC-PC, MUJ-PC etc
1.31-µm single-mode fiber
Diameter: 0.9 mm
Color: Dark blue
Bending Radius: 20 mm (minimum)
Heat resistant
Length: Options (contact Oki Semiconductor)
Oki Semiconductor
Units
––––––––––––––––––––––––––––––––––––––––––––––––––––––––– ■ OD9602N Photo Diode Preamp Module ■
PACKAGE DIMENSIONS
(Units: mm)
2.5
2.5
11.2
5
8
5.6
(TOP VIEW)
1.0
1.8
7.62
R1
1
4
2.54 x 3
1.75
0.46
0.17
3 max
0.25
Pin Configuration
Pin No.
Description
Pin No.
Description
01
VCC
05
Output (+)
02
GND
06
NC
03
GND
07
GND
04
Output (-)
08
GND
Oki Semiconductor
9
■ OD9602N Photo Diode Preamp Module ■ ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Notes:
10
Oki Semiconductor
OD9604N Photo Diode Preamp Module
2.488 Gbps InGaAs Technology (+ 3.3 V)
INTRODUCTION
Oki Semiconductor’s OD9604N PD Preamp Module is a surface-mount 1.3-µm, InGaAs PIN photo diode
combined with a transimpedance amplifier. This OD9604N is designed to operate at 2.488 Gbps in
STM16/OC48 environments. This photo diode uses a single + 3.3-V power supply and provides a differential output signal. It is available in an 8-pin Mini-Dil package and is coupled to a single-mode fiber
with a pigtail.
FEATURES
•
•
•
•
Surface mount Mini-Dil package
Low cost
2.488 Gbps operation
Peak-sensitivity wavelength: 1300 nm
APPLICATION
•
•
•
•
High-speed optical transmission modules (receiver section)
High-speed optical receivers
Inter-office interconnect
Gigabit Ethernet
Oki Semiconductor
11
■ OD9604N Photo Diode Preamp Module ■ ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
ELECTICAL CHARACTERISTICS
Absolute Maximum Ratings (ambient temperature Ta=25°C unless otherwise noted)
Parameter
Supply Voltage
Symbol
Ratings
Units
Vs
6
V
mW
Optical Input Power
PIOP
4
Operating Case Temperature (Ta)
Topr
- 40 to + 85
°C
Storage Temperature
Tstg
- 40 to + 85
°C
Soldering Profile
Tsol
260 (10)
°C (sec)
Exceeding these maximum ratings could cause immediate damage or lead to permanent deterioration of the device.
Optical and Electrical Characteristics
(Ta=25°C, VCC=3.3 V, λ=1310 nm unless otherwise noted)
Parameter
Test Conditions
Min.
Typ.
Max.
Units
-
+3.0
+3.3
+3.6
V
Supply Voltage
Supply Current
-
-
26
50
mA
f3 dB
1400
-
-
MHz
Differential, measured with -17 dBm input signal
1230
-
1860
V/W
-
-16
-
-
dBm
Optical Modulation Bandwidth
Responsivity
Input Current before Clipping
Differential Output Voltage
Sensitivity
-
185
250
415
mVp-p
BER < 10 -10 (See note)
-
-23.0
-
dBm
AC Input
-2
-
-
dBm
f3 dB
-
44
-
kHz
Optical Overload
Low Frequency Cutoff
Notes:
Data rate: 1.25 Gbps. Data sequence: PRBS 2 23 -1.
Contact Oki Semiconductor sales office for reliability report.
Connector and Fiber Specifications
Connector
Fiber
12
FC-PC, SC-PC, MUJ-PC etc
1.31-µm single-mode fiber
Diameter: 0.9 mm
Color: Dark blue
Bending Radius: 20 mm (minimum)
Heat resistant
Length: Options (contact Oki Semiconductor)
Oki Semiconductor
––––––––––––––––––––––––––––––––––––––––––––––––––––––––– ■ OD9604N Photo Diode Preamp Module ■
PACKAGE DIMENSIONS
(Units: mm)
2.5
2.5
11.2
5
8
5.6
(TOP VIEW)
1.0
1.8
7.62
R1
1
4
2.54 x 3
1.75
0.46
0.17
3 max
0.25
Pin Configuration
Pin Mo.
Description
Pin No.
Description
01
VCC
05
Output (-)
02
GND
06
NC
03
GND
07
GND
04
Output (+)
08
GND
Oki Semiconductor
13
■ OD9604N Photo Diode Preamp Module ■ ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Notes:
14
Oki Semiconductor
The information contained herein can change without notice owing to product and/or technical improvements.
Please make sure before using the product that the information you are referring to is up-to-date.
The outline of action and examples of application circuits described herein have been chosen as an explanation of the standard action
and performance of the product. When you actually plan to use the product, please ensure that the outside conditions are reflected in
the actual circuit and assembly designs.
Oki assumes no responsibility or liability whatsoever for any failure or unusual or unexpected operation resulting from misuse, neglect,
improper installation, repair, alteration or accident, improper handling, or unusual physical or electrical stress including, but not limited
to, exposure to parameters outside the specified maximum ratings or operation outside the specified operating range.
Neither indemnity against nor license of a third party's industrial and intellectual property right,etc.is granted by us in connection with
the use of product and/or the information and drawings contained herein. No responsibility is assumed by us for any infringement of a
third party's right which may result from the use thereof.
When designing your product, please use our product below the specified maximum ratings and within the specified operating ranges,
including but not limited to operating voltage, power dissipation, and operating temperature.
The products listed in this document are intended for use in general electronics equipment for commercial applications (e.g.,office
automation, communication equipment, measurement equipment, consumer electronics, etc.).These products are not authorized for
use in any system or application that requires special or enhanced quality and reliability characteristics nor in any system or application
where the failure of such system or application may result in the loss or damage of property or death or injury to humans. Such
applications include, but are not limited to: traffic control, automotive, safety, aerospace, nuclear power control, and medical, including
life support and maintenance.
Certain parts in this document may need governmental approval before they can be exported to certain countries. The purchaser
assumes the responsibility of determining the legality of export of these parts and will take appropriate and necessary steps, at their
own expense, for export to another country.
Copyright 2000 Oki Semiconductor
Oki Semiconductor reserves the right to make changes in specifications at anytime and without notice. This information furnished by
Oki Semiconductor in this publication is believed to be accurate and reliable. However, no responsibility is assumed by Oki
Semiconductor for its use; nor for any infringements of patents or other rights of third parties resulting from its use. No license is
granted under any patents or patent rights of Oki.
Oki Semiconductor
Oki REGIONAL SALES OFFICES
Northwest Area
Southwest Area
785 N. Mary Avenue
Sunnyvale, CA 94086
Tel: 408/720-8940
Fax: 408/720-8965
2302 Martin Street
Suite 250
Irvine, CA 92715
Tel: 949/752-1843
Fax: 949/752-2423
North Central Area
300 Park Blvd.
Suite 365
Itasca, IL 60143
Tel: 630/250-1313
Fax: 630/250-1414
Southeast Area
1590 Adamson Parkway
Suite 220
Morrow, GA 30260
Tel: 770/960-9660
Fax: 770/960-9682
Northeast Area
138 River Road
Shattuck Office Center
Andover, MA 01810
Tel: 978/688-8687
Fax: 978/688-8896
Oki Web Site:
http://www.okisemi.com
For Oki Literature:
Call toll free 1-800-OKI-6388
(6 a.m. to 5 p.m. Pacific Time)
Oki Stock No: 320191-001
Corporate Headquarters
785 N. Mary Avenue
Sunnyvale, CA 94086-2909
Tel: 408/720-1900
Fax: 408/720-1918
Similar pages