OPTEK OP805TX Hi-reliability npn sil icon phototransistor Datasheet

Product Bulletin OP803TX
September 1996
Hi-Reliability NPN Silicon Phototransistor
Types OP803TX/TXV, OP804TX/TXV, OP805TX/TXV
Features
Absolute Maximum Ratings (TA = 25o C unless otherwise noted)
• High reliability screening patterned
Storage Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65o C to +150o C
o
o
Operating Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . -55 C to +125 C
Lead Soldering Temperature [1/16 inch (1.6 mm) from case for 5 sec. with soldering
o (1)
iron] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240 C
Collector-Emitter Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 V
Collector-Base Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 V
Emitter-Base Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.0 V
Emitter-Collector Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.0 V
(2)
Power Dissipation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250 mW
after MIL-PRF-19500
• Each lot subjected to Group A & B Lot
Acceptance
• Lensed for high sensitivity
• Mechanically and spectrally matched
to the OP235TX/TXV and
OP236TX/TXV series IREDs
Description
Each device in the OP803, OP804 and
OP805TX/TXV series consists of a high
reliability NPN phototransistor mounted in
a lensed, hermetically sealed, TO-18
package. All devices are 100% screened
per Table II of MIL-PRF-19500. Typical
screening and lot acceptance tests are
provided on page 13-4.
Notes:
(1) RMA flux is recommended. Duration can be extended to 10 sec. max. when flow soldering.
(2) Derate linearly 2.5 mW/o C above 25o C.
The OP803, OP804 and OP805 TX/TXV
series lensing creates an acceptance half
angle of 12o< D> measured from the optical
axis to the half power point. The series
can be matched with either a solid state
infrared source, such as the OP235 and
OP236 TX/TXV series IREDs, or can be
used to sense infrared content in a visible
light source, such as a tungsten bulb or
sunlight for automatic brightness control.
Optek Technology, Inc.
1215 W. Crosby Road
Carrollton, Texas 75006
13-34
(972) 323-2200
Fax (972) 323-2396
Types OP803TX/TXV, OP804TX/TXV, OP805TX/TXV
Electrical Characteristics (T A = 25o C unless otherwise noted)
Symbol
IC(on)
I CEO
Parameter
Min
On-State Collector Current
OP803TX,TXV
OP804TX,TXV
OP805TX,TXV
4.0
7.0
15.0
Typ
Collector-Emitter Dark Current
Max
Units
Test Conditions
8.0
22.0
mA
mA
mA
VCE = 5.0 V, Ee = 5.0 mW/cm2(3)
VCE = 5.0 V, Ee = 5.0 mW/cm2(3)
2(3)
VCE = 5.0 V, Ee = 5.0 mW/cm
100
100
nA
µA
VCE = 10.0 V, E e = 0
VCE = 10.0 V, E e = 0, TA = 100o C
V(BR)CBO
Collector-Base Breakdown Voltage
30
V
I C = 100 µA, I E = 0, Ee = 0
V(BR)CEO
Collector-Emitter Breakdown Voltage
30
V
I C = 100 µA, I B = 0, Ee = 0
V(BR)EBO
Emitter-Base Breakdown Voltage
5.0
V
I E = 100 µA, I C = 0, Ee = 0
VCE(SAT)
Collector-Emitter Saturation Voltage
0.40
V
I C = 0.4 mA, Ee = 5.0 mW/cm2(3)
tr
Rise TimeOP804TX,TXV
OP805TX,TXV
10.0
15.0
µs
VCC = 30 V, I C = 1.00 mA,
RL = 100 Ω
tf
Fall TimeOP804TX,TXV
OP805TX,TXV
10.0
15.0
µs
(3) Light source is an unfiltered tungsten lamp operated at a temperature of 2870 K.
@TOPICS =
Optek reserves the right to make changes at any time in order to improve design and to supply the best product possible
Optek Technology, Inc.
1215 W. Crosby Road
Carrollton, Texas 75006
(972)323-2200
Fax (972)323-2396
13-35
Similar pages