OPA188 OPA2188 OPA4188 SBOS525 – AUGUST 2011 www.ti.com 0.03-μV/°C Drift, Low-Noise, Rail-to-Rail Output, 36-V, Zero-Drift OPERATIONAL AMPLIFIERS Check for Samples: OPA188, OPA2188, OPA4188 FEATURES DESCRIPTION • • • The OPAx188 series operational amplifiers use TI proprietary auto-zeroing techniques to provide low offset voltage (25 μV, max), and near zero-drift over time and temperature. These miniature, high-precision, low quiescent current amplifiers offer high input impedance and rail-to-rail output swing within 15 mV of the rails. The input common-mode range includes the negative rail. Either single or dual supplies can be used in the range of +4.0 V to +36 V (±2 V to ±18 V). 1 2 • • • • • • • Low Offset Voltage: 25 μV (max) Zero-Drift: 0.03 μV/°C Low Noise: 8.8 nV/√Hz 0.1-Hz to 10-Hz Noise: 0.25 µVPP Excellent DC Precision: PSRR: 142 dB CMRR: 146 dB Open-Loop Gain: 136 dB Gain Bandwidth: 2 MHz Quiescent Current: 475 μA (max) Wide Supply Range: ±2 V to ±18 V Rail-to-Rail Output: Input Includes Negative Rail RFI Filtered Inputs MicroSIZE Packages The single version is available in the MicroSIZE SOT23-5, MSOP-8, and SO-8 packages; the dual is offered in MSOP-8 and SO-8 packages; the quad is offered in SO-14 and TSSOP-14 packages. All versions are specified for operation from –40°C to +105°C. 145 OPA2188 Zero-Drift Architecture Precision Laser Trim Architecture 125 • • • • • • • • • Offset Voltage (mV) APPLICATIONS Bridge Amplifiers Strain Gauges Test Equipment Transducer Applications Temperature Measurement Electronic Scales Medical Instrumentation Resister Thermal Detectors Precision Active Filters 105 85 65 45 25 5 -55 -35 -15 5 25 45 65 85 105 125 Temperature (°C) Zero-Drift Amplifier Portfolio VERSION PRODUCT OFFSET VOLTAGE (µV) OFFSET VOLTAGE DRIFT (µV/°C) Single OPA188 (4 V to 36 V) 25 0.085 2 OPA333 (5 V) 10 0.05 0.35 Single Dual BANDWIDTH (MHz) OPA378 (5 V) 50 0.25 0.9 OPA735 (12 V) 5 0.05 1.6 OPA2188 (4 V to 36 V) 25 0.085 2 OPA2333 (5 V) 10 0.05 0.35 OPA2378 (5 V) 50 0.25 0.9 OPA2735 (12 V) 5 0.05 1.6 Quad OPA4188 (4 V to 36 V) 25 0.085 2 Quad OPA4330 (5 V) 50 0.25 0.35 1 2 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. All trademarks are the property of their respective owners. UNLESS OTHERWISE NOTED this document contains PRODUCTION DATA information current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 2011, Texas Instruments Incorporated OPA188 OPA2188 OPA4188 SBOS525 – AUGUST 2011 www.ti.com This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications. PACKAGE INFORMATION (1) PRODUCT PACKAGELEAD PACKAGE DESIGNATOR SPECIFIED TEMPERATURE RANGE PACKAGE MARKING SOT23-5 DBV –40°C to +105°C TBD SO-8 D –40°C to +105°C OPA188A MSOP-8 DGK –40°C to +105°C TBD SO-8 D –40°C to +105°C 2188 MSOP-8 DGK –40°C to +105°C 2188 SO-14 D –40°C to +105°C OPA4188A TSSOP-14 PW –40°C to +105°C OPA4188A ORDERING NUMBER TRANSPORT MEDIA, QUANTITY SINGLE OPA188 (2) OPA188AIDBVT Tape and Reel, 250 OPA188AIDBVR Tape and Reel, 3000 OPA188AID Rails, 100 OPA188AIDR Tape and Reel, 2500 OPA188AIDGKT Tape and Reel, 250 OPA188AIDGKR Tape and Reel, 2500 DUAL OPA2188 OPA2188AID Rails, 100 OPA2188AIDR Tape and Reel, 2500 OPA2188AIDGKT Tape and Reel, 250 OPA2188AIDGKR Tape and Reel, 2500 QUAD OPA4188 (2) (1) (2) OPA4188AID Rails, 90 OPA4188AIDR Tape and Reel, 2000 OPA4188AIPW Rails, 90 OPA4188AIPWR Tape and Reel, 2000 For the most current package and ordering information, see the Package Option Addendum at the end of this document, or visit the device product folder at www.ti.com. Product preview device. ABSOLUTE MAXIMUM RATINGS Supply voltage Signal input terminals Voltage Current (1) OPAx188 UNIT ±20, 40 (single supply) V (V–) – 0.5 to (V+) + 0.5 V ±10 mA Output short-circuit (2) Continuous Operating temperature –55 to +125 °C Storage temperature –65 to +150 °C Junction temperature +150 °C 1.5 kV 1 kV ESD ratings (1) (2) 2 Human body model (HBM) Charged device model (CDM) Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may degrade device reliability. These are stress ratings only and functional operation of the device at these or any other conditions beyond those specified is not implied. Short-circuit to ground, one amplifier per package. Submit Documentation Feedback Copyright © 2011, Texas Instruments Incorporated Product Folder Link(s): OPA188 OPA2188 OPA4188 OPA188 OPA2188 OPA4188 SBOS525 – AUGUST 2011 www.ti.com ELECTRICAL CHARACTERISTICS: High-Voltage Operation VS = ±4 V to ±18 V (VS = +8 V to +36 V) Boldface limits apply over the specified temperature range, TA = –40°C to +105°C. At TA = +25°C, RL = 10 kΩ connected to VS/2, and VCOM = VOUT = VS/2, unless otherwise noted. OPA188, OPA2188, OPA4188 PARAMETER CONDITIONS MIN TYP MAX UNIT OFFSET VOLTAGE VOS Input offset voltage dVOS/dT vs Temperature PSRR vs power supply VS = 4 V to 36 V, VCM = VS/2 vs temperature VS = 4 V to 36 V, VCM = VS/2 μV 6 25 0.03 0.085 0.075 0.3 μV/V 0.3 μV/V μV/°C See note (1) Long-term stability Channel separation, dc μV μV/V 1 INPUT BIAS CURRENT IB Input bias current VCM = VS/2 over temperature –40°C to +105°C ±160 ±320 Input offset current IOS –40°C to +105°C over temperature ±850 pA ±4 nA ±1700 pA ±2 nA NOISE en Input voltage noise, f = 0.1 Hz to 10 Hz 0.25 μVPP en Input voltage noise density, f = 1 kHz 8.8 nV/Hz in Input current noise density, f = 1 kHz 7 fA/Hz INPUT VOLTAGE RANGE VCM Common-mode voltage range (V+) – 1.5 V– Common-mode rejection ratio CMRR over temperature V (V–) < VCM < (V+) – 1.5 V 120 134 dB (V–) + 0.5 V < VCM < (V+) – 1.5 V, VS = ±18 V 130 146 dB (V–) + 0.5 V < VCM < (V+) – 1.5 V, VS = ±18 V 120 126 dB INPUT IMPEDANCE Differential 100/6 MΩ/pF Common-mode 6/9.5 1012 Ω/pF OPEN-LOOP GAIN Open-loop voltage gain (V–) + 500 mV < VO < (V+) – 500 mV, RL = 10 kΩ 130 136 dB Open-loop voltage gain (V–) + 500 mV < VO < (V+) – 500 mV, RL = 10 kΩ 120 126 dB AOL FREQUENCY RESPONSE GBW Gain-bandwidth product 2 MHz SR Slew rate G = +1 0.8 V/μs Settling time, 0.1% VS = ±18 V, G = 1, 10-V step 20 μs Settling time, 0.01% VS = ±18 V, G = 1, 10-V step 27 μs Overload recovery time VIN × G = VS 1 μs Total harmonic distortion + noise 1 kHz, G = 1, VOUT = 1 Vrms 0.0001 % THD+N (1) 1000-hour life test at +125°C demonstrated randomly distributed variation in the range of measurement limits—approximately 4 μV. Copyright © 2011, Texas Instruments Incorporated Product Folder Link(s): OPA188 OPA2188 OPA4188 Submit Documentation Feedback 3 OPA188 OPA2188 OPA4188 SBOS525 – AUGUST 2011 www.ti.com ELECTRICAL CHARACTERISTICS: High-Voltage Operation (continued) VS = ±4 V to ±18 V (VS = +8 V to +36 V) Boldface limits apply over the specified temperature range, TA = –40°C to +105°C. At TA = +25°C, RL = 10 kΩ connected to VS/2, and VCOM = VOUT = VS/2, unless otherwise noted. OPA188, OPA2188, OPA4188 PARAMETER CONDITIONS MIN TYP MAX UNIT OUTPUT Voltage output swing from rail Voltage output swing from rail ISC Short-circuit current RO Open-loop output resistance CLOAD Capacitive load drive No load 6 15 RL = 10 kΩ 220 250 mV RL = 10 kΩ 310 350 mV f = 1 MHz, IO = 0 120 Ω 1 nF ±18 mV mA POWER SUPPLY VS IQ 4 to 36 (±2 to ±18) Operating voltage range Quiescent current (per amplifier) VS = ±4 V to VS = ±18 V over temperature IO = 0 mA 415 V 475 μA 525 μA TEMPERATURE RANGE 4 Specified range –40 +105 °C Operating range –40 +125 °C Storage range –65 +150 °C Submit Documentation Feedback Copyright © 2011, Texas Instruments Incorporated Product Folder Link(s): OPA188 OPA2188 OPA4188 OPA188 OPA2188 OPA4188 SBOS525 – AUGUST 2011 www.ti.com ELECTRICAL CHARACTERISTICS: Low-Voltage Operation VS = ±2 V to < ±4 V (VS = +4 V to < +8 V) Boldface limits apply over the specified temperature range, TA = –40°C to +105°C. At TA = +25°C, RL = 10 kΩ connected to VS/2, and VCOM = VOUT = VS/2, unless otherwise noted. OPA188, OPA2188, OPA4188 PARAMETER CONDITIONS MIN TYP MAX UNIT OFFSET VOLTAGE VOS Input offset voltage dVOS/dT vs temperature PSRR vs power supply VS = 4 V to 36 V, VCM = VS/2 vs temperature VS = 4 V to 36 V, VCM = VS/2 μV 6 25 0.03 0.085 0.075 0.3 μV/V 0.3 μV/V μV/°C See Note (1) Long-term stability Channel separation, dc μV μV/V 1 INPUT BIAS CURRENT IB Input bias current VCM = VS/2 over temperature –40°C to +105°C ±160 ±320 Input offset current IOS –40°C to +105°C over temperature ±850 pA ±4 nA ±1700 pA ±2 nA NOISE 0.25 μVPP Input voltage noise density, f = 1 kHz 8.8 nV/Hz Input current noise density, f = 1 kHz 7 fA/Hz Input voltage noise, f = 0.1 Hz to 10 Hz en in INPUT VOLTAGE RANGE VCM Common-mode voltage range (V+) – 1.5 V– Common-mode rejection ratio CMRR over temperature V (V–) < VCM < (V+) – 1.5 V 106 114 dB (V–) + 0.5 V < VCM < (V+) – 1.5 V, VS = ±2 V 114 120 dB (V–) + 0.5 V < VCM < (V+) – 1.5 V, VS = ±2 V 110 120 dB INPUT IMPEDANCE Differential Common-mode 100/6 MΩ/pF 6/95 1012 Ω/pF OPEN-LOOP GAIN Open-loop voltage gain AOL Open-loop voltage gain (V–) + 500 mV < VO < (V+) – 500 mV, RL = 5 kΩ, VS = 5 V 110 120 dB (V–) + 500 mV < VO < (V+) – 500 mV, RL = 10 kΩ 120 130 dB (V–) + 500 mV < VO < (V+) – 500 mV, RL = 10 kΩ 114 120 dB FREQUENCY RESPONSE GBW Gain-bandwidth product SR Slew rate G = +1 Overload recovery time VIN × G = VS Total harmonic distortion + noise 1 kHz, G = 1, VOUT = 1 Vrms THD+N (1) 2 MHz 0.8 V/μs 1 μs 0.0001 % 1000-hour life test at +125°C demonstrated randomly distributed variation in the range of measurement limits—approximately 4 μV. Copyright © 2011, Texas Instruments Incorporated Product Folder Link(s): OPA188 OPA2188 OPA4188 Submit Documentation Feedback 5 OPA188 OPA2188 OPA4188 SBOS525 – AUGUST 2011 www.ti.com ELECTRICAL CHARACTERISTICS: Low-Voltage Operation (continued) VS = ±2 V to < ±4 V (VS = +4 V to < +8 V) Boldface limits apply over the specified temperature range, TA = –40°C to +105°C. At TA = +25°C, RL = 10 kΩ connected to VS/2, and VCOM = VOUT = VS/2, unless otherwise noted. OPA188, OPA2188, OPA4188 PARAMETER CONDITIONS MIN TYP MAX UNIT OUTPUT No load Voltage output swing from rail Voltage output swing from rail 6 15 RL = 10 kΩ 220 250 mV RL = 10 kΩ 310 350 mV f = 1 MHz, IO = 0 120 Ω 1 nF ±18 ISC Short-circuit current RO Open-loop output resistance CLOAD Capacitive load drive mV mA POWER SUPPLY VS 4 to 36 (±2 to ±18) Operating voltage range IQ Quiescent current (per amplifier) VS = ±2 V to VS = ±4 V over temperature IO = 0 mA V 385 440 μA 525 μA TEMPERATURE RANGE Specified range –40 +105 °C Operating range –40 +125 °C Storage range –65 +150 °C THERMAL INFORMATION: OPA2188 OPA2188ID THERMAL METRIC (1) OPA2188IDGK D DGK 8 PINS 8 PINS θJA Junction-to-ambient thermal resistance 111.0 159.3 θJCtop Junction-to-case (top) thermal resistance 54.9 37.4 θJB Junction-to-board thermal resistance 51.7 48.5 ψJT Junction-to-top characterization parameter 9.3 1.2 ψJB Junction-to-board characterization parameter 51.1 77.1 θJCbot Junction-to-case (bottom) thermal resistance n/a n/a (1) 6 UNITS °C/W For more information about traditional and new thermal metrics, see the IC Package Thermal Metrics application report, SPRA953. Submit Documentation Feedback Copyright © 2011, Texas Instruments Incorporated Product Folder Link(s): OPA188 OPA2188 OPA4188 OPA188 OPA2188 OPA4188 SBOS525 – AUGUST 2011 www.ti.com PIN CONFIGURATIONS OPA188 D, DGK PACKAGES (SO-8, MSOP-8) (TOP VIEW) NC (1) -IN +IN V- 1 2 3 4 8 NC OUT 1 7 V+ V- 2 6 OUT +IN 3 5 NC OPA2188 D, DGK PACKAGES (SO-8, MSOP-8) (TOP VIEW) 1 -IN A 2 +IN A 3 V- 4 5 V+ 4 -IN OPA4188 D, PW PACKAGES (SO-14, TSSOP-14) (TOP VIEW) (1) NC = no connection. OUT A OPA188 DBV PACKAGE (SOT23-5) (TOP VIEW) A B 8 V+ 7 OUT B 6 -IN B 5 +IN B 14 OUT D OUT A 1 -IN A 2 +IN A 3 12 +IN D V+ 4 11 V- +IN B 5 -IN B 6 OUT B 7 Copyright © 2011, Texas Instruments Incorporated Product Folder Link(s): OPA188 OPA2188 OPA4188 A D 13 -IN D 10 +IN C B C 9 -IN C 8 OUT C Submit Documentation Feedback 7 OPA188 OPA2188 OPA4188 SBOS525 – AUGUST 2011 www.ti.com TYPICAL CHARACTERISTICS Table 1. Characteristic Performance Measurements DESCRIPTION FIGURE Offset Voltage Production Distribution Figure 1 Offset Voltage Drift Distribution Figure 2 Offset Voltage vs Temperature Figure 3 Offset Voltage vs Common-Mode Voltage Figure 4, Figure 5 Offset Voltage vs Power Supply Figure 6 IB and IOS vs Common-Mode Voltage Figure 7 Input Bias Current vs Temperature Figure 8 Output Voltage Swing vs Output Current (Maximum Supply) Figure 9 CMRR and PSRR vs Frequency (Referred-to-Input) Figure 10 CMRR vs Temperature Figure 11, Figure 12 PSRR vs Temperature Figure 13 0.1-Hz to 10-Hz Noise Figure 14 Input Voltage Noise Spectral Density vs Frequency Figure 15 THD+N Ratio vs Frequency Figure 16 THD+N vs Output Amplitude Figure 17 Quiescent Current vs Supply Voltage Figure 18 Quiescent Current vs Temperature Figure 19 Open-Loop Gain and Phase vs Frequency Figure 20 Closed-Loop Gain vs Frequency Figure 21 Open-Loop Gain vs Temperature Figure 22 Open-Loop Output Impedance vs Frequency Small-Signal Overshoot vs Capacitive Load (100-mV Output Step) Figure 23 Figure 24, Figure 25 No Phase Reversal Figure 26 Positive Overload Recovery Figure 27 Negative Overload Recovery Figure 28 Small-Signal Step Response (100 mV) Figure 29, Figure 30 Large-Signal Step Response Figure 31, Figure 32 Large-Signal Settling Time (10-V Positive Step) Figure 33 Large-Signal Settling Time (10-V Negative Step) Figure 34 Short-Circuit Current vs Temperature Figure 35 Maximum Output Voltage vs Frequency Figure 36 Channel Separation vs Frequency Figure 37 EMIRR IN+ vs Frequency Figure 38 8 Submit Documentation Feedback Copyright © 2011, Texas Instruments Incorporated Product Folder Link(s): OPA188 OPA2188 OPA4188 OPA188 OPA2188 OPA4188 SBOS525 – AUGUST 2011 www.ti.com TYPICAL CHARACTERISTICS VS = ±18 V, VCM = VS/2, RLOAD = 10 kΩ connected to VS/2, and CL = 100 pF, unless otherwise noted. OFFSET VOLTAGE PRODUCTION DISTRIBUTION OFFSET VOLTAGE DRIFT DISTRIBUTION 40 Distribution Taken From 1400 Amplifiers Percentage of Amplifiers (%) 16 14 12 10 8 6 4 Distribution Taken From 78 Amplifiers 35 30 25 20 15 10 5 2 OFFSET VOLTAGE vs TEMPERATURE 5 Typical Units Shown VS = ±18 V 0.09 5 VOS (mV) VOS (mV) 5 Typical Units Shown VS = ±2 V 10 0 0 -5 -5 -10 -10 -15 -2.5 -15 -55 -35 -15 5 25 45 65 85 105 125 -2 -1.5 -1 -0.5 0 0.5 1 1.5 2 2.5 VCM (V) Temperature (°C) Figure 3. Figure 4. OFFSET VOLTAGE vs COMMON-MODE VOLTAGE OFFSET VOLTAGE vs POWER SUPPLY 15 5 Typical Units Shown VS = ±18 V 5 Typical Units Shown VSUPPLY = ±2 V to ±18 V 10 5 VOS (mV) 5 VOS (mV) 0.08 OFFSET VOLTAGE vs COMMON-MODE VOLTAGE 15 5 10 0.07 Figure 2. 15 15 0.06 Offset Voltage Drift (mV/°C) Figure 1. 10 0.05 0.04 0.01 -20 -18 -16 -14 -12 -10 -8 -6 -4 -2 0 2 4 6 8 10 12 14 16 18 20 Offset Voltage (mV) 0.1 0 0 0.03 Percentage of Amplifiers (%) 18 0.02 20 0 0 -5 -5 -10 -10 -15 -15 -20 -15 -10 -5 0 5 10 15 20 0 2 4 VCM (V) 6 8 10 12 14 16 18 20 VSUPPLY (V) Figure 5. Figure 6. Copyright © 2011, Texas Instruments Incorporated Product Folder Link(s): OPA188 OPA2188 OPA4188 Submit Documentation Feedback 9 OPA188 OPA2188 OPA4188 SBOS525 – AUGUST 2011 www.ti.com TYPICAL CHARACTERISTICS (continued) VS = ±18 V, VCM = VS/2, RLOAD = 10 kΩ connected to VS/2, and CL = 100 pF, unless otherwise noted. IB AND IOS vs COMMON-MODE VOLTAGE INPUT BIAS CURRENT vs TEMPERATURE 4000 500 IB+ -IB 300 IOS IB- 3000 IOS Input Bias Current (pA) IB and IOS (pA) +IB 400 200 100 0 -100 2000 1000 0 -1000 -200 -300 -2000 -20 -15 -10 0 -5 5 10 15 20 -55 -35 5 -15 85 105 OUTPUT VOLTAGE SWING vs OUTPUT CURRENT (Maximum Supply) CMRR AND PSRR vs FREQUENCY (Referred-to-Input) 125 160 -40°C +85°C +125°C 140 120 100 80 60 40 +PSRR -PSRR CMRR 20 0 2 4 6 8 10 12 14 16 18 20 22 1 24 10 100 Figure 9. 10k 100k 1M Figure 10. CMRR vs TEMPERATURE CMRR vs TEMPERATURE Common-Mode Rejection Ratio (mV/V) 40 (V-) < VCM < (V+) - 1.5 V 35 1k Frequency (Hz) Output Current (mA) Common-Mode Rejection Ratio (mV/V) 65 Figure 8. 0 (V-) + 0.5 V < VCM < (V+) - 1.5 V VSUPPLY = ±2 V 25 20 15 10 5 0 8 (V-) < VCM < (V+) - 1.5 V 7 6 (V-) + 0.5 V < VCM < (V+) - 1.5 V VSUPPLY = ±18 V 5 4 3 2 1 0 -55 10 45 Figure 7. 20 19 18 17 16 15 14 -14 -15 -16 -17 -18 -19 -20 30 25 Temperature (°C) Common-Mode Rejection Ratio (dB), Power-Supply Rejection Ratio (dB) Output Voltage (V) VCM (V) -35 -15 5 25 45 65 85 105 125 -55 -35 -15 5 25 45 Temperature (°C) Temperature (°C) Figure 11. Figure 12. Submit Documentation Feedback 65 85 105 125 Copyright © 2011, Texas Instruments Incorporated Product Folder Link(s): OPA188 OPA2188 OPA4188 OPA188 OPA2188 OPA4188 SBOS525 – AUGUST 2011 www.ti.com TYPICAL CHARACTERISTICS (continued) VS = ±18 V, VCM = VS/2, RLOAD = 10 kΩ connected to VS/2, and CL = 100 pF, unless otherwise noted. PSRR vs TEMPERATURE 0.1-Hz TO 10-Hz NOISE 5 Typical Units Shown VSUPPLY = ±2 V to ±18 V 0.8 0.6 0.4 50 nV/div Power-Supply Rejection Ratio (mV/V) 1 0.2 0 -0.2 -0.4 -0.6 -0.8 Peak-to-Peak Noise = 250 nV -1 -55 -35 5 -15 25 45 65 85 105 Time (1 s/div) 125 Temperature (°C) Figure 13. Figure 14. INPUT VOLTAGE NOISE SPECTRAL DENSITY vs FREQUENCY THD+N RATIO vs FREQUENCY Total Harmonic Distortion + Noise (%) Voltage Noise Density (nV/ÖHz) 0.01 10 -80 VOUT = 1 VRMS BW = 80 kHz 0.001 -100 0.0001 -120 G = +1, RL = 10 kW G = -1, RL = 10 kW 0.00001 1 0.1 1 10 100 1k 10k 10 100k 100 1k 10k Total Harmonic Distortion + Noise (dB) 100 -140 20k Frequency (Hz) Frequency (Hz) Figure 15. Figure 16. THD+N vs OUTPUT AMPLITUDE QUIESCENT CURRENT vs SUPPLY VOLTAGE BW = 80 kHz 0.01 -80 0.001 -100 0.0001 -120 G = +1, RL = 10 kW G = -1, RL = 10 kW 0.00001 0.01 -140 0.1 1 10 Output Amplitude (VRMS) 20 0.5 0.48 0.46 0.44 IQ (mA) Total Harmonic Distortion + Noise (%) -60 Total Harmonic Distortion + Noise (dB) 0.1 0.42 0.4 0.38 0.36 0.34 0.32 Specified Supply-Voltage Range 0.3 0 4 8 Figure 17. 12 16 20 24 28 32 36 Supply Voltage (V) Figure 18. Copyright © 2011, Texas Instruments Incorporated Product Folder Link(s): OPA188 OPA2188 OPA4188 Submit Documentation Feedback 11 OPA188 OPA2188 OPA4188 SBOS525 – AUGUST 2011 www.ti.com TYPICAL CHARACTERISTICS (continued) VS = ±18 V, VCM = VS/2, RLOAD = 10 kΩ connected to VS/2, and CL = 100 pF, unless otherwise noted. QUIESCENT CURRENT vs TEMPERATURE OPEN-LOOP GAIN AND PHASE vs FREQUENCY 0.5 0 180 Gain VS = ±18 V 0.48 VS = ±2 V 0.46 135 -45 Phase Gain (dB) 0.42 0.4 0.38 90 -90 45 -135 0 -180 Phase (°) IQ (mA) 0.44 0.36 0.34 0.32 -225 10M -45 0.3 -55 -35 5 -15 25 45 65 85 105 0.1 125 1 10 100 1k 10k 100k 1M Frequency (Hz) Temperature (°C) Figure 19. Figure 20. CLOSED-LOOP GAIN vs FREQUENCY OPEN-LOOP GAIN vs TEMPERATURE 3 25 20 VSUPPLY = 4 V, RL = 10 kW VSUPPLY = 36 V, RL = 10 kW 2.5 15 2 AOL (mV/V) Gain (dB) 10 5 0 1.5 1 -5 -10 G = 10 G = +1 G = -1 -15 0.5 0 -20 10k 100k 1M 10M -55 -35 5 -15 Frequency (Hz) 25 45 65 85 105 125 Temperature (°C) Figure 21. Figure 22. OPEN-LOOP OUTPUT IMPEDANCE vs FREQUENCY SMALL-SIGNAL OVERSHOOT vs CAPACITIVE LOAD (100-mV Output Step) 10k 40 RL = 10 kW 35 ROUT = 0 W 30 Overshoot (%) ZO (W) 1k 100 10 ROUT = 25 W 25 ROUT = 50 W 20 15 ROUT Device 1 -18 V 5 RL CL 0 1m 1 10 100 1k 10k 100k 1M 10M 0 100 200 300 400 500 600 700 800 900 1000 Frequency (Hz) Figure 23. 12 G = +1 +18 V 10 Capacitive Load (pF) Figure 24. Submit Documentation Feedback Copyright © 2011, Texas Instruments Incorporated Product Folder Link(s): OPA188 OPA2188 OPA4188 OPA188 OPA2188 OPA4188 SBOS525 – AUGUST 2011 www.ti.com TYPICAL CHARACTERISTICS (continued) VS = ±18 V, VCM = VS/2, RLOAD = 10 kΩ connected to VS/2, and CL = 100 pF, unless otherwise noted. SMALL-SIGNAL OVERSHOOT vs CAPACITIVE LOAD (100-mV Output Step) NO PHASE REVERSAL 40 ROUT = 0 W 35 Device ROUT = 50 W 30 25 -18 V 37 VPP Sine Wave (±18.5 V) 5 V/div Overshoot (%) +18 V ROUT = 25 W 20 15 RI = 10 kW 10 G = -1 RF = 10 kW +18 V VIN VOUT ROUT Device 5 CL RL = 10 kW -18 V 0 0 Time (100 ms/div) 100 200 300 400 500 600 700 800 900 1000 Capacitive Load (pF) Figure 25. Figure 26. POSITIVE OVERLOAD RECOVERY NEGATIVE OVERLOAD RECOVERY VIN VOUT 20 kW 20 kW +18 V Device 5 V/div 5 V/div 2 kW VOUT VIN -18 V G = -10 2 kW +18 V VOUT Device VIN -18 V G = -10 VOUT VIN Time (5 ms/div) Time (5 ms/div) Figure 27. Figure 28. SMALL-SIGNAL STEP RESPONSE (100 mV) SMALL-SIGNAL STEP RESPONSE (100 mV) +18 V RL = 10 kW CL = 10 pF 20 mV/div 20 mV/div RL = 10 kW CL = 10 pF G = +1 RI = 2 kW RF = 2 kW +18 V Device Device -18 V RL CL CL -18 V G = -1 Time (20 ms/div) Time (1 ms/div) Figure 29. Figure 30. Copyright © 2011, Texas Instruments Incorporated Product Folder Link(s): OPA188 OPA2188 OPA4188 Submit Documentation Feedback 13 OPA188 OPA2188 OPA4188 SBOS525 – AUGUST 2011 www.ti.com TYPICAL CHARACTERISTICS (continued) VS = ±18 V, VCM = VS/2, RLOAD = 10 kΩ connected to VS/2, and CL = 100 pF, unless otherwise noted. LARGE-SIGNAL STEP RESPONSE LARGE-SIGNAL STEP RESPONSE G = +1 RL = 10 kW CL = 10 pF 5 V/div 5 V/div G = -1 RL = 10 kW CL = 10 pF Time (50 ms/div) Time (50 ms/div) Figure 31. Figure 32. LARGE-SIGNAL SETTLING TIME (10-V Positive Step) LARGE-SIGNAL SETTLING TIME (10-V Negative Step) 10 6 4 12-Bit Settling 2 0 -2 (±1/2 LSB = ±0.024%) -4 -6 6 4 0 -2 -6 -8 -10 20 30 40 50 60 0 10 20 Time (ms) Figure 33. Figure 34. 40 50 60 MAXIMUM OUTPUT VOLTAGE vs FREQUENCY 30 15 20 12.5 Output Voltage (VPP) VS = ±15 V 10 ISC, Source 0 ISC, Sink -10 -20 10 Maximum output voltage without slew-rate induced distortion. 7.5 VS = ±5 V 5 2.5 -30 VS = ±2.25 V 0 -55 -35 -15 5 25 45 65 85 105 125 1k 10k Temperature (°C) Figure 35. 14 30 Time (ms) SHORT-CIRCUIT CURRENT vs TEMPERATURE ISC (mA) (±1/2 LSB = ±0.024%) -4 -10 10 12-Bit Settling 2 -8 0 G = -1 8 D From Final Value (mV) D From Final Value (mV) 10 G = -1 8 100k 1M 10M Frequency (Hz) Figure 36. Submit Documentation Feedback Copyright © 2011, Texas Instruments Incorporated Product Folder Link(s): OPA188 OPA2188 OPA4188 OPA188 OPA2188 OPA4188 SBOS525 – AUGUST 2011 www.ti.com TYPICAL CHARACTERISTICS (continued) VS = ±18 V, VCM = VS/2, RLOAD = 10 kΩ connected to VS/2, and CL = 100 pF, unless otherwise noted. CHANNEL SEPARATION vs FREQUENCY EMIRR IN+ vs FREQUENCY 160 -60 Channel A to B Channel B to A 140 -80 120 EMIRR IN+ (dB) Channel Separation (dB) -70 -90 -100 -110 -120 100 80 60 40 -130 20 -140 -150 1 10 100 1k 10k 100k 1M 10M 100M 0 10M 100M Frequency (Hz) Frequency (Hz) Figure 37. Figure 38. Copyright © 2011, Texas Instruments Incorporated Product Folder Link(s): OPA188 OPA2188 OPA4188 1G Submit Documentation Feedback 10G 15 OPA188 OPA2188 OPA4188 SBOS525 – AUGUST 2011 www.ti.com APPLICATION INFORMATION The OPAx188 family of operational amplifiers combine precision offset and drift with excellent overall performance, making them ideal for many precision applications. The precision offset drift of only 0.085 µV/°C provides stability over the entire temperature range. In addition, the device offers excellent overall performance with high CMRR, PSRR, and AOL. As with all amplifiers, applications with noisy or high-impedance power supplies require decoupling capacitors close to the device pins. In most cases, 0.1-µF capacitors are adequate. OPERATING CHARACTERISTICS The OPAx188 family of amplifiers is specified for operation from 4 V to 36 V (±2 V to ±18 V). Many of the specifications apply from –40°C to +105°C. Parameters that can exhibit significant variance with regard to operating voltage or temperature are presented in the Typical Characteristics. EMI REJECTION The OPAx188 uses integrated electromagnetic interference (EMI) filtering to reduce the effects of EMI interference from sources such as wireless communications and densely populated boards with a mix of analog signal chain and digital components. EMI immunity can be improved with circuit design techniques; the OPAx188 benefits from these design improvements. Texas Instruments has developed the ability to accurately measure and quantify the immunity of an operational amplifier over a broad frequency spectrum extending from 10 MHz to 6 GHz. Figure 39 shows the results of this testing on the OPAx188. Detailed information can also be found in the Application Report EMI Rejection Ratio of Operational Amplifiers (SBOA128), available for download from the TI website. 160 140 EMIRR IN+ (dB) 120 100 80 60 40 20 0 10M 100M 1G 10G Frequency (Hz) Figure 39. OPAx188 EMIRR Testing 16 Submit Documentation Feedback Copyright © 2011, Texas Instruments Incorporated Product Folder Link(s): OPA188 OPA2188 OPA4188 OPA188 OPA2188 OPA4188 SBOS525 – AUGUST 2011 www.ti.com GENERAL LAYOUT GUIDELINES For best operational performance of the device, good printed circuit board (PCB) layout practices are recommended. Low-loss, 0.1-µF bypass capacitors should be connected between each supply pin and ground, placed as close to the device as possible. A single bypass capacitor from V+ to ground is applicable to single-supply applications. PHASE-REVERSAL PROTECTION The OPAx188 family has an internal phase-reversal protection. Many op amps exhibit a phase reversal when the input is driven beyond its linear common-mode range. This condition is most often encountered in noninverting circuits when the input is driven beyond the specified common-mode voltage range, causing the output to reverse into the opposite rail. The input of the OPAx188 prevents phase reversal with excessive common-mode voltage. Instead, the output limits into the appropriate rail. This performance is shown in Figure 40. +18 V Device 5 V/div -18 V 37 VPP Sine Wave (±18.5 V) VIN VOUT Time (100 ms/div) Figure 40. No Phase Reversal CAPACITIVE LOAD AND STABILITY The dynamic characteristics of the OPAx188 have been optimized for a range of common operating conditions. The combination of low closed-loop gain and high capacitive loads decreases the phase margin of the amplifier and can lead to gain peaking or oscillations. As a result, heavier capacitive loads must be isolated from the output. The simplest way to achieve this isolation is to add a small resistor (for example, ROUT equal to 50 Ω) in series with the output. Figure 41 and Figure 42 illustrate graphs of small-signal overshoot versus capacitive load for several values of ROUT. Also, refer to the Applications Report, Feedback Plots Define Op Amp AC Performance (SBOA015), available for download from the TI website, for details of analysis techniques and application circuits. 40 40 RL = 10 kW ROUT = 0 W 35 35 ROUT = 0 W ROUT = 25 W 25 ROUT = 25 W ROUT = 50 W 30 ROUT = 50 W 20 15 G = +1 +18 V ROUT 10 -18 V 25 20 15 RI = 10 kW 10 Device 5 Overshoot (%) Overshoot (%) 30 RL RF = 10 kW G = -1 +18 V ROUT CL Device 5 CL RL = 10 kW -18 V 0 0 0 100 200 300 400 500 600 700 800 900 1000 0 100 200 300 400 500 600 700 800 900 1000 Capacitive Load (pF) Capacitive Load (pF) Figure 41. Small-Signal Overshoot versus Capacitive Load (100-mV Output Step) Figure 42. Small-Signal Overshoot versus Capacitive Load (100-mV Output Step) Copyright © 2011, Texas Instruments Incorporated Product Folder Link(s): OPA188 OPA2188 OPA4188 Submit Documentation Feedback 17 OPA188 OPA2188 OPA4188 SBOS525 – AUGUST 2011 www.ti.com ELECTRICAL OVERSTRESS Designers often ask questions about the capability of an operational amplifier to withstand electrical overstress. These questions tend to focus on the device inputs, but may involve the supply voltage pins or even the output pin. Each of these different pin functions have electrical stress limits determined by the voltage breakdown characteristics of the particular semiconductor fabrication process and specific circuits connected to the pin. Additionally, internal electrostatic discharge (ESD) protection is built into these circuits to protect them from accidental ESD events both before and during product assembly. These ESD protection diodes also provide in-circuit, input overdrive protection, as long as the current is limited to 10 mA as stated in the Absolute Maximum Ratings. Figure 43 shows how a series input resistor may be added to the driven input to limit the input current. The added resistor contributes thermal noise at the amplifier input and its value should be kept to a minimum in noise-sensitive applications. V+ IOVERLOAD 10 mA max Device VOUT VIN 5 kW Figure 43. Input Current Protection An ESD event produces a short duration, high-voltage pulse that is transformed into a short duration, high-current pulse as it discharges through a semiconductor device. The ESD protection circuits are designed to provide a current path around the operational amplifier core to prevent it from being damaged. The energy absorbed by the protection circuitry is then dissipated as heat. When the operational amplifier connects into a circuit, the ESD protection components are intended to remain inactive and not become involved in the application circuit operation. However, circumstances may arise where an applied voltage exceeds the operating voltage range of a given pin. Should this condition occur, there is a risk that some of the internal ESD protection circuits may be biased on, and conduct current. Any such current flow occurs through ESD cells and rarely involves the absorption device. If there is an uncertainty about the ability of the supply to absorb this current, external zener diodes may be added to the supply pins. The zener voltage must be selected such that the diode does not turn on during normal operation. However, its zener voltage should be low enough so that the zener diode conducts if the supply pin begins to rise above the safe operating supply voltage level. 18 Submit Documentation Feedback Copyright © 2011, Texas Instruments Incorporated Product Folder Link(s): OPA188 OPA2188 OPA4188 OPA188 OPA2188 OPA4188 SBOS525 – AUGUST 2011 www.ti.com APPLICATION EXAMPLES The application examples of Figure 44 and Figure 45 highlight only a few of the circuits where the OPAx188 family of devices can be used. 15 V U2 1/2 OPA2188 VOUTP 3.3 V VDIFF/2 -15 V R5 1 kW Ref 1 Ref 2 RG 500 W + R7 1 kW U1 INA159 VCM 10 VOUT Sense -15 V -VDIFF/2 U5 1/2 OPA2188 VOUTN 15 V Figure 44. Discrete INA + Attenuation for ADC with 3.3-V Supply +15 V (5 V) Out In REF5050 1 mF 1 mF R2 49.1 kW R3 60.4 kW R1 4.99 kW OPA188 VOUT 0°C = 0 V 200°C = 5 V R5 (1) 105.8 kW RTD Pt100 R4 1 kW (1) R5 provides positive-varying excitation to linearize output. Figure 45. RTD Amplifier with Linearization Copyright © 2011, Texas Instruments Incorporated Product Folder Link(s): OPA188 OPA2188 OPA4188 Submit Documentation Feedback 19 PACKAGE OPTION ADDENDUM www.ti.com 15-Aug-2011 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) TBD Lead/ Ball Finish (3) PREVIEW SOIC D 8 OPA2188AIDGKR ACTIVE MSOP DGK 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR OPA2188AIDGKT ACTIVE MSOP DGK 8 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR OPA2188AIDR PREVIEW SOIC D 8 Call TI Samples (Requires Login) OPA2188AID TBD Call TI MSL Peak Temp Call TI Call TI (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 1 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Audio www.ti.com/audio Communications and Telecom www.ti.com/communications Amplifiers amplifier.ti.com Computers and Peripherals www.ti.com/computers Data Converters dataconverter.ti.com Consumer Electronics www.ti.com/consumer-apps DLP® Products www.dlp.com Energy and Lighting www.ti.com/energy DSP dsp.ti.com Industrial www.ti.com/industrial Clocks and Timers www.ti.com/clocks Medical www.ti.com/medical Interface interface.ti.com Security www.ti.com/security Logic logic.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Power Mgmt power.ti.com Transportation and Automotive www.ti.com/automotive Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com Wireless www.ti.com/wireless-apps RF/IF and ZigBee® Solutions www.ti.com/lprf TI E2E Community Home Page e2e.ti.com Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2011, Texas Instruments Incorporated