Burr-Brown OPA2244PA Micropower, single-supply operational amplifiers microamplifier â ¢ sery Datasheet

®
OPA
OPA244
OPA2244
OPA4244
OPA
244
224
4
OPA
OPA
244
®
424
OPA
4
224
4
MicroPower,
Single-Supply
OPERATIONAL AMPLIFIERS
MicroAmplifier ™ Series
FEATURES
DESCRIPTION
● MicroSIZE PACKAGES
OPA244 (Single): SOT-23-5
OPA2244 (Dual): MSOP-8
OPA4244 (Quad): TSSOP-14
● MicroPOWER: IQ = 50µA/channel
● SINGLE SUPPLY OPERATION
● WIDE BANDWIDTH: 430kHz
● WIDE SUPPLY RANGE:
Single Supply: 2.2V to 36V
Dual Supply: ±1.1V to ±18V
The OPA244 (single), OPA2244 (dual), and OPA4244 (quad)
op amps are designed for very low quiescent current
(50µA/channel), yet achieve excellent bandwidth. Ideal for
battery powered and portable instrumentation, all versions are
offered in micro packages for space-limited applications.
The dual and quad versions feature completely independent
circuitry for lowest crosstalk and freedom from interaction, even
when overdriven or overloaded.
The OPA244 series is easy to use and free from phase
inversion and overload problems found in some other op amps.
These amplifiers are stable in unity gain and excellent performance is maintained as they swing to their specified limits.
They can be operated from single (+2.2V to +36V) or dual
supplies (±1.1V to ±18V). The input common-mode voltage
range includes ground—ideal for many single supply applications. All versions have similar performance. However, there
are some differences, such as common-mode rejection. All
versions are interchangeable in most applications.
All versions are offered in miniature, surface-mount packages.
OPA244 (single version) comes in the tiny 5-lead SOT-23-5
surface mount, SO-8 surface mount, and 8-pin DIP. OPA2244
(dual version) is available in the MSOP-8 surface mount,
SO-8 surface-mount, and 8-pin DIP. The OPA4244 (quad)
comes in the TSSOP-14 surface mount. They are fully specified
from –40°C to +85°C and operate from –55°C to +125°C.
A SPICE Macromodel is available for design analysis.
APPLICATIONS
●
●
●
●
●
BATTERY POWERED SYSTEMS
PORTABLE EQUIPMENT
PCMCIA CARDS
BATTERY PACKS AND POWER SUPPLIES
CONSUMER PRODUCTS
OPA244
Out 1
5
V+
4
–In
V– 2
+In 3
OPA4244
SOT-23-5
OPA2244
OPA244
NC
1
8
NC
Out A
1
–In
2
7
V+
–In A
2
+In
3
6
Output
+In A
3
V–
4
5
NC
V–
4
8-Pin DIP, SO-8
A
B
8
V+
7
Out B
6
–In B
5
+In B
8-Pin DIP, SO-8, MSOP-8
Output A
1
14
Output D
–Input A
2
13
–Input D
+Input A
3
12
+Input D
+V
4
11
–V
+Input B
5
10
+Input C
–Input B
6
9
–Input C
Output B
7
8
Output C
TSSOP-14
International Airport Industrial Park • Mailing Address: PO Box 11400, Tucson, AZ 85734 • Street Address: 6730 S. Tucson Blvd., Tucson, AZ 85706 • Tel: (520) 746-1111
Twx: 910-952-1111 • Internet: http://www.burr-brown.com/ • Cable: BBRCORP • Telex: 066-6491 • FAX: (520) 889-1510 • Immediate Product Info: (800) 548-6132
© 1999 Burr-Brown Corporation
PDS-1437C
Printed in U.S.A. December, 1999
SPECIFICATIONS: VS = +2.6V to +36V
Boldface limits apply over the specified temperature range, TA = –40°C to +85°C
At TA = +25°C, RL = 20kΩ connected to ground, unless otherwise noted.
OPA244NA, PA, UA
PARAMETER
CONDITION
OFFSET VOLTAGE
Input Offset Voltage
TA = –40°C to 85°C
vs Temperature
vs Power Supply
TA = –40°C to 85°C
OUTPUT
Voltage Output, Positive
TA = –40°C to 85°C
Voltage Output, Negative
TA = –40°C to 85°C
Voltage Output, Positive
TA = –40°C to 85°C
Voltage Output, Negative
TA = –40°C to 85°C
Short-Circuit Current
Capacitive Load Drive
POWER SUPPLY
Specified Voltage Range
Minimum Operating Voltage
Quiescent Current
TA = –40°C to 85°C
TEMPERATURE RANGE
Specified Range
Operating Range
Storage Range
Thermal Resistance
SOT-23-5 Surface-Mount
SO-8 Surface-Mount
8-Pin DIP
UNITS
±1.5
±2
±0.7
dVOS/dT
PSRR
TA = –40°C to 85°C
VS = +2.6V to +36V
VS = +2.6V to +36V
±4
5
50
50
mV
mV
µV/°C
µV/V
µV/V
VCM = VS /2
VCM = VS /2
–10
±1
–25
±10
nA
nA
IB
IOS
VCM
CMRR
VS = ±18V, VCM = –18V to +17.1V
VS = ±18V, VCM = –18V to +17.1V
VO = 0.5V to (V+) – 0.9
VO = 0.5V to (V+) – 0.9
AOL
GBW
SR
VO
µVp-p
nV/√Hz
fA/√Hz
0.4
22
40
en
in
0
84
84
INPUT IMPEDANCE
Differential
Common-Mode
FREQUENCY RESPONSE
Gain-Bandwidth Product
Slew Rate
Settling Time 0.01%
Overload Recovery Time
MAX
VS = ±7.5V, VCM = 0
NOISE
Input Voltage Noise, f = 0.1kHz to 10kHz
Input Voltage Noise Density, f = 1kHz
Current Noise Density, f = 1kHz
OPEN-LOOP GAIN
Open-Loop Voltage Gain
TA = –40°C to 85°C
TYP(1)
VOS
INPUT BIAS CURRENT
Input Bias Current
Input Offset Current
INPUT VOLTAGE RANGE
Common-Mode Voltage Range
Common-Mode Rejection
TA = –40°C to 85°C
MIN
86
86
G=1
10V Step
VIN • Gain = VS
AOL ≥ 80dB, RL = 20kΩ to VS/2
AOL ≥ 80dB, RL = 20kΩ to VS/2
AOL ≥ 80dB, RL = 20kΩ to VS/2
AOL ≥ 80dB, RL = 20kΩ to VS/2
AOL ≥ 80dB, RL = 20kΩ to Ground
AOL ≥ 80dB, RL = 20kΩ to Ground
AOL ≥ 80dB, RL = 20kΩ to Ground
AOL ≥ 80dB, RL = 20kΩ to Ground
(V+) – 0.9
(V+) – 0.9
0.5
0.5
TA = –40°C to 85°C
+2.6
ISC
CLOAD
VS
IQ
98
(V+) – 0.9
V
dB
dB
106 || 2
109 || 2
Ω || pF
Ω || pF
106
dB
dB
430
–0.1/+0.16
150
8
kHz
V/µs
µs
µs
(V+) – 0.75
(V+) – 0.75
0.2
0.2
(V+) – 0.75
(V+) – 0.75
0.1
0.1
–25/+12
See Typical Curve
V
V
V
V
V
V
V
V
mA
+36
+2.2
50
IO = 0
IO = 0
–40
–55
–65
θJA
200
150
100
60
70
V
V
µA
µA
85
125
150
°C
°C
°C
°C/W
°C/W
°C/W
NOTE: (1) VS = +15V.
The information provided herein is believed to be reliable; however, BURR-BROWN assumes no responsibility for inaccuracies or omissions. BURR-BROWN assumes
no responsibility for the use of this information, and all use of such information shall be entirely at the user’s own risk. Prices and specifications are subject to change
without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. BURR-BROWN does not authorize or warrant
any BURR-BROWN product for use in life support devices and/or systems.
®
OPA244, 2244, 4244
2
SPECIFICATIONS: VS = +2.6V to +36V
Boldface limits apply over the specified temperature range, TA = –40°C to +85°C
At TA = +25°C, RL = 20kΩ connected to ground, unless otherwise noted.
OPA2244EA, PA, UA
PARAMETER
OFFSET VOLTAGE
Input Offset Voltage
TA = –40°C to 85°C
vs Temperature
vs Power Supply
TA = –40°C to 85°C
Channel Separation
CONDITION
OUTPUT
Voltage Output, Positive
TA = –40°C to 85°C
Voltage Output, Negative
TA = –40°C to 85°C
Voltage Output, Positive
TA = –40°C to 85°C
Voltage Output, Negative
TA = –40°C to 85°C
Short-Circuit Current
Capacitive Load Drive
POWER SUPPLY
Specified Voltage Range
Minimum Operating Voltage
Quiescent Current (per amplifier)
TA = –40°C to 85°C
TEMPERATURE RANGE
Specified Range
Operating Range
Storage Range
Thermal Resistance
MSOP-8 Surface-Mount
SO-8 Surface-Mount
8-Pin DIP
UNITS
±1.5
±2
mV
mV
µV/°C
µV/V
µV/V
dB
±0.7
dVOS/dT
PSRR
TA = –40°C to 85°C
VS = +2.6V to +36V
VS = +2.6V to +36V
±4
5
50
50
140
IB
IOS
VCM = VS /2
VCM = VS /2
–10
±1
VCM
CMRR
AOL
GBW
SR
VO
VS = ±18V, VCM = –18V to +17.1V
VS = ±18V, VCM = –18V to +17.1V
0
72
72
VO = 0.5V to (V+) – 0.9
VO = 0.5V to (V+) – 0.9
86
86
G=1
10V Step
VIN • Gain = VS
AOL ≥ 80dB, RL = 20kΩ to VS/2
AOL ≥ 80dB, RL = 20kΩ to VS/2
AOL ≥ 80dB, RL = 20kΩ to VS/2
AOL ≥ 80dB, RL = 20kΩ to VS/2
AOL ≥ 80dB, RL = 20kΩ to Ground
AOL ≥ 80dB, RL = 20kΩ to Ground
AOL ≥ 80dB, RL = 20kΩ to Ground
AOL ≥ 80dB, RL = 20kΩ to Ground
(V+) – 0.9
(V+) – 0.9
0.5
0.5
TA = –40°C to 85°C
+2.6
ISC
CLOAD
VS
IQ
–25
±10
98
(V+) – 0.9
V
dB
dB
106 || 2
109 || 2
Ω || pF
Ω || pF
106
dB
dB
430
–0.1/+0.16
150
8
kHz
V/µs
µs
µs
(V+) – 0.75
(V+) – 0.75
0.2
0.2
(V+) – 0.75
(V+) – 0.75
0.1
0.1
–25/+12
See Typical Curve
V
V
V
V
V
V
V
V
mA
+36
+2.2
40
IO = 0
IO = 0
nA
nA
µVp-p
nV/√Hz
fA/√Hz
0.4
22
40
en
in
INPUT IMPEDANCE
Differential
Common-Mode
FREQUENCY RESPONSE
Gain-Bandwidth Product
Slew Rate
Settling Time 0.01%
Overload Recovery Time
MAX
VS = ±7.5V, V CM = 0
NOISE
Input Voltage Noise, f = 0.1kHz to 10kHz
Input Voltage Noise Density, f = 1kHz
Current Noise Density, f = 1kHz
OPEN-LOOP GAIN
Open-Loop Voltage Gain
TA = –40°C to 85°C
TYP(1)
VOS
INPUT BIAS CURRENT
Input Bias Current
Input Offset Current
INPUT VOLTAGE RANGE
Common-Mode Voltage Range
Common-Mode Rejection
TA = –40°C to 85°C
MIN
–40
–55
–65
50
63
V
V
µA
µA
85
125
150
°C
°C
°C
θJA
200
150
100
°C/W
°C/W
°C/W
NOTE: (1) VS = +15V.
®
3
OPA244, 2244, 4244
SPECIFICATIONS: VS = +2.6V to +36V
Boldface limits apply over the specified temperature range, TA = –40°C to +85°C
At TA = +25°C, RL = 20kΩ connected to ground, unless otherwise noted.
OPA4244EA
PARAMETER
CONDITION
OFFSET VOLTAGE
Input Offset Voltage
TA = –40°C to 85°C
vs Temperature
vs Power Supply
TA = –40°C to 85°C
Channel Separation
OUTPUT
Voltage Output, Positive
TA = –40°C to 85°C
Voltage Output, Negative
TA = –40°C to 85°C
Voltage Output, Positive
TA = –40°C to 85°C
Voltage Output, Negative
TA = –40°C to 85°C
Short-Circuit Current
Capacitive Load Drive
POWER SUPPLY
Specified Voltage Range
Minimum Operating Voltage
Quiescent Current (per amplifier)
TA = –40°C to 85°C
TEMPERATURE RANGE
Specified Range
Operating Range
Storage Range
Thermal Resistance
TSSOP-14 Surface Mount
UNITS
±1.5
±2
mV
mV
µV/°C
µV/V
µV/V
dB
±0.7
dVOS/dT
PSRR
TA = –40°C to 85°C
VS = +2.6V to +36V
VS = +2.6V to +36V
±4
5
50
50
140
VCM = VS /2
VCM = VS /2
IB
IOS
–10
±1
VCM
CMRR
VS = ±18V, VCM = –18V to +17.1V
VS = ±18V, VCM = –18V to +17.1V
VO = 0.5V to (V+) – 0.9
VO = 0.5V to (V+) – 0.9
AOL
GBW
SR
VO
–25
±10
0
82
82
86
86
G=1
10V Step
VIN • Gain = VS
AOL ≥ 80dB, RL = 20kΩ to VS/2
AOL ≥ 80dB, RL = 20kΩ to VS/2
AOL ≥ 80dB, RL = 20kΩ to VS/2
AOL ≥ 80dB, RL = 20kΩ to VS/2
AOL ≥ 80dB, RL = 20kΩ to Ground
AOL ≥ 80dB, RL = 20kΩ to Ground
AOL ≥ 80dB, RL = 20kΩ to Ground
AOL ≥ 80dB, RL = 20kΩ to Ground
(V+) – 0.9
(V+) – 0.9
0.5
0.5
TA = –40°C to 85°C
+2.6
ISC
CLOAD
VS
IQ
104
(V+) – 0.9
V
dB
dB
106 || 2
109 || 2
Ω || pF
Ω || pF
106
dB
dB
430
–0.1/+0.16
150
8
kHz
V/µs
µs
µs
(V+) – 0.75
(V+) – 0.75
0.2
0.2
(V+) – 0.75
(V+) – 0.75
0.1
0.1
–25/+12
See Typical Curve
V
V
V
V
V
V
V
V
mA
+36
+2.2
40
IO = 0
IO = 0
–40
–55
–65
θJA
100
NOTE: (1) VS = +15V.
®
OPA244, 2244, 4244
4
nA
nA
µVp-p
nV/√Hz
fA/√Hz
0.4
22
40
en
in
INPUT IMPEDANCE
Differential
Common-Mode
FREQUENCY RESPONSE
Gain-Bandwidth Product
Slew Rate
Settling Time 0.01%
Overload Recovery Time
MAX
VS = ±7.5V, VCM = 0
NOISE
Input Voltage Noise, f = 0.1kHz to 10kHz
Input Voltage Noise Density, f = 1kHz
Current Noise Density, f = 1kHz
OPEN-LOOP GAIN
Open-Loop Voltage Gain
TA = –40°C to 85°C
TYP(1)
VOS
INPUT BIAS CURRENT
Input Bias Current
Input Offset Current
INPUT VOLTAGE RANGE
Common-Mode Voltage Range
Common-Mode Rejection
TA = –40°C to 85°C
MIN
60
70
V
V
µA
µA
85
125
150
°C
°C
°C
°C/W
ABSOLUTE MAXIMUM RATINGS(1)
ELECTROSTATIC
DISCHARGE SENSITIVITY
Supply Voltage, V+ to V– .................................................................... 36V
Input Voltage Range(2) ................................... (V–) – 0.3V to (V+) + 0.3V
Input Current(2) ................................................................................. 10mA
Output Short-Circuit(3) .............................................................. Continuous
Operating Temperature .................................................. –55°C to +125°C
Storage Temperature ..................................................... –65°C to +150°C
Junction Temperature ...................................................................... 150°C
Lead Temperature (soldering, 10s) ................................................. 300°C
ESD Capability ................................................................................ 2000V
This integrated circuit can be damaged by ESD. Burr-Brown
recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling
and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits
may be more susceptible to damage because very small
parametric changes could cause the device not to meet its
published specifications.
NOTES: (1) Stresses above these ratings may cause permanent damage.
Exposure to absolute maximum conditions for extended periods may degrade device reliability. (2) Inputs are diode-clamped to the supply rails and
should be current-limited to 10mA or less if input voltages can exceed rails
by more than 0.3V. (3) Short-circuit to ground, one amplifier per package.
PACKAGE /ORDERING INFORMATION
PRODUCT
PACKAGE
PACKAGE
DRAWING
NUMBER
Single
OPA244NA
SOT-23-5 Surface-Mount
331
–40°C to +85°C
A44
"
"
"
"
8-Pin DIP
SO-8 Surface-Mount
006
182
–40°C to +85°C
–40°C to +85°C
OPA244PA
OPA244UA
"
OPA244PA
OPA244UA
SPECIFIED
TEMPERATURE
RANGE
PACKAGE
MARKING
ORDERING
NUMBER(1)
TRANSPORT
MEDIA
OPA244NA/250
OPA244NA/3K
OPA244PA
OPA244UA
OPA244UA/2K5
Tape and Reel
Tape and Reel
Rails
Rails
Tape and Reel
OPA2244EA/250
OPA2244EA/2K5
OPA2244PA
OPA2244UA
OPA2244UA/2K5
Tape and Reel
Tape and Reel
Rails
Rails
Tape and Reel
OPA4244EA/250
OPA4244EA/2K5
Tape and Reel
Tape and Reel
"
"
"
"
"
Dual
OPA2244EA
MSOP-8 Surface-Mount
337
–40°C to +85°C
A44
"
"
"
"
"
OPA2244PA
OPA2244UA
8-Pin DIP
SO-8 Surface-Mount
006
182
–40°C to +85°C
–40°C to +85°C
OPA2244PA
OPA2244UA
"
"
"
"
"
Quad
OPA4244EA
TSSOP-14 Surface-Mount
357
–40°C to +85°C
OPA4244EA
"
"
"
"
"
NOTE: (1) Products followed by a slash (/) are only available in Tape and Reel in the quantities indicated (e.g., /250 indicates 250 devices per reel). Ordering 3000
pieces of “OPA244NA/3K” will get a single 3000 piece Tape and Reel.
®
5
OPA244, 2244, 4244
TYPICAL PERFORMANCE CURVES
At TA = 25°C, VS = +15V, and RL = 20kΩ connected to Ground, unless otherwise noted.
CHANNEL SEPARATION
OPEN-LOOP GAIN AND PHASE vs FREQUENCY
180
160
140
120
–60
130
Phase
100
–80
–100
80
60
–120
Gain
Separation (dB)
150
–40
All Models
Phase(°)
–20
140
160
AOL (dB)
0
120
–140
20
–160
80
0
–180
70
–20
–200
60
10
100
10k
1k
100k
OPA4244
100
40
1
OPA244
110
OPA2244
90
1M
1
10
100
10k
1k
100k
Frequency (Hz)
Frequency (Hz)
POWER SUPPLY AND COMMON-MODE REJECTION vs FREQUENCY
110
120
100
110
100
90
PSRR, CMRR (dB)
PSRR, CMRR (dB)
OPA244
80
OPA2244
CMRR
70
OPA4244
60
50
90
80
CMRR
70
60
50
40
PSRR
PSRR
40
30
30
10
100
1k
10k
100k
1
1M
10
100
OPEN-LOOP GAIN vs LOAD RESISTANCE
100k
1M
OUTPUT VOLTAGE SWING vs OUTPUT CURRENT
15
120
VO = ±5V
Output Voltage Swing (V)
110
100
Gain(dB)
10k
1k
Frequency (Hz)
Frequency (Hz)
90
80
70
14
RL to VS /2
13
25°C
12
125°C
11
–55°C
10
–10
–11
–55°C
–12
125°C
–13
–14
25°C
–15
60
10
1
100
0
Load (kΩ)
±4
±6
±8
Output Current (mA)
®
OPA244, 2244, 4244
±2
6
±10
±12
±14
TYPICAL PERFORMANCE CURVES (Cont.)
At TA = 25°C, VS = +15V, and RL = 20kΩ connected to Ground, unless otherwise noted.
INPUT BIAS CURRENT
vs INPUT COMMON-MODE VOLTAGE
INPUT BIAS CURRENT vs TEMPERATURE
–12
–12
–11
Bias Current (nA)
Bias Current (nA)
–10
–8
–6
–10
–IB
–9
+IB
–8
–7
–4
–6
–2
–15
–10
–5
0
5
10
–5
–75
15
–50
–25
0
Common-Mode Voltage (V)
AOL, CMRR, PSRR vs TEMPERATURE
0.20
120
0.18
Slew Rate (V/µs)
110
CMRR
100
95
AOL
90
100
125
0.14
0.12
–SR
0.10
0.08
VS = ±7.5, RL = 20kΩ,
CL = 100pF, Gain = +1
0.06
0.04
85
0.02
0.00
–75
–50
0
–25
25
75
50
100
–75
125
–25
75
25
175
125
Temperature(°C)
Temperature (°C)
COMMON-MODE REJECTION
vs SUPPY VOLTAGE
QUIESCENT CURRENT AND SHORT-CIRCUIT
vs SUPPLY VOLTAGE
52
100
48
Quiescent Current (µA)
120
80
60
40
20
0
35
IQ
30
44
25
–ISC
40
20
36
15
+ISC
32
10
28
5
24
0
4
8
12
16
20
24
28
32
36
0
0
Suppy Voltage (V)
Short-Circuit Current (mA)
80
CMRR (dB)
75
+SR
0.16
PSRR
105
50
SLEW RATE vs TEMPERATURE
125
115
25
Temperature (°C)
4
8
12
16
20
24
28
32
36
Supply Voltage (V)
®
7
OPA244, 2244, 4244
TYPICAL PERFORMANCE CURVES (Cont.)
At TA = 25°C, VS = +15V, and RL = 20kΩ connected to Ground, unless otherwise noted.
50
–ISC
45
40
±10
+ISC
35
25
–75
–50
–25
0
25
50
75
100
0
125
–75
–50
0
–25
100
Voltage Noise
10
Output Voltage (Vp-p)
Current Noise
Current Noise (fA√Hz)
Voltage Noise (nV√Hz)
50
75
100
0
125
MAXIMUM OUTPUT VOLTAGE vs FREQUENCY
100
VS = 36V
30
25
20
VS =15V
15
10
5
1
1k
10k
1
100k
VS = 2.7V
0
100
1k
10k
100k
1M
Frequency(Hz)
Frequency (Hz)
SMALL SIGNAL OVERSHOOT vs LOAD CAPACITANCE
70%
60
OPA244
OPA4244
60%
G = +1
G = –2
OPA2244
50%
40
Overshoot (%)
Overshoot (%)
25
40
35
50
+10
20
1000
100
+15
+ISC
Temperature (°C)
1000
10
–15
IQ
+5
INPUT VOLTAGE AND CURRENT NOISE
SPECTRAL DENSITY vs FREQUENCY
1
–20
30
Temperature (°C)
10
–25
–ISC
35
±5
30
–30
OPA4244
G = –1
30
G = +3
20
40%
G = +1, RL = ∞
30%
20%
G = +1, RL = 20kΩ
G = +2, RL = 20kΩ
10
10%
G = +3, RL = 20kΩ
0%
0
100
1k
10
10k
®
OPA244, 2244, 4244
100
1k
Load Capacitance (pF)
Load Capacitance (pF)
8
10k
Short-Circuit Current (mA)
55
Quiescent Current (µA)
Quiescent Current (µA)
60
Short-Circuit Current (mA)
QUIESCENT AND SHORT-CIRCUIT CURRENT vs TEMPERATURE
±40
60
OPA244
±35
55
OPA2244
±30
50
±25
45
±20
IQ
40
±15
65
TYPICAL PERFORMANCE CURVES (Cont.)
At TA = 25°C, VS = +15V, and RL = 20kΩ connected to Ground, unless otherwise noted.
LARGE-SIGNAL STEP RESPONSE, G = 1, CL = 100pF
OPA244
OPA4244
2V/div
2V/div
OPA2244
50µs/div
25µs/div
SMALL-SIGNAL STEP RESPONSE, G = 1, CL = 100pF
OPA244
OPA4244
50mV/div
50mV/div
OPA2244
10µs/div
10µs/div
OFFSET VOLTAGE PRODUCTION DISTRIBUTION
30
12
OPA4244
OPA244
25
1800
1500
1200
900
600
300
0
–1500
1500
1300
900
1100
700
500
300
–100
0
100
–300
–500
–700
0
–900
0
–1100
5
–1300
2
–300
10
–600
4
15
–900
6
20
–1200
Percent of Amplifiers (%)
OPA2244
8
–1500
Percent of Amplifiers (%)
10
Offset Voltage (µV)
Offset Voltage (µV)
®
9
OPA244, 2244, 4244
TYPICAL PERFORMANCE CURVES (Cont.)
At TA = 25°C, VS = +15V, and RL = 20kΩ connected to Ground, unless otherwise noted.
OFFSET VOLTAGE PRODUCTION DISTRIBUTION
70
OPA244
60
OPA2244
50
35
Percent of Amplifiers (%)
Percent of Amplifiers (%)
30
25
20
15
10
40
30
20
5
10
0
0
0
1
2
3
4
5
6
7
8
9
10
0
VOS Drift (µV/°C)
0.5
1
1.5
2
2.5
3
3.5
VOS Drift (µV/°C)
®
OPA244, 2244, 4244
OPA4244
10
4
4.5
5.0 5.5
APPLICATIONS INFORMATION
This allows a designer to have the same assured performance at any supply voltage within this range. In addition,
many key parameters are guaranteed over the specified
temperature range, –40°C to +85°C. Most behavior remains
unchanged throughout the full operating voltage range. Parameters which vary significantly with operating voltage or
temperature are shown in typical performance curves.
The OPA244 is unity-gain stable and suitable for a wide
range of general purpose applications. Power supply pins
should be bypassed with 0.01µF ceramic capacitors.
OPERATING VOLTAGE
The OPA244 can operate from single supply (+2.2V to
+36V) or dual supplies (±1.1 to ±18V) with excellent
performance. Unlike most op amps which are specified at
only one supply voltage, the OPA244 is specified for real
world applications; a single set of specifications applies
throughout the +2.6V to +36V (±1.3 to ±18V) supply range.
Useful information on solder pad design for printed circuit
boards can be found in Burr-Brown's Application Bulletin
AB-132B, “Solder Pad Recommendations for SurfaceMount Devices,” easily found at Burr-Brown's web site
(http://www.burr-brown.com).
RH
10Ω
To Load
IH
R1
38.3kΩ
R5
383kΩ
High-Side
Current Sense
R3
38.3kΩ
V+
–In
A1
+In OPA244
V+ for A1, A2
R4
20kΩ
+
2.2V to 36V
(±1.1V to ±18V)
R8
100kΩ
Out
VO = 10 • IH • RH
V–
R2
19.1kΩ
R2 and R4 divide down the
common-mode input to A1.
V– for A1, A2
V+
–In
A2
+In OPA244
V–
R7
9.09kΩ
R6
10kΩ
RL
10Ω
Out
VO = 10 • IL • RL
Low-Side
Current Sense
Common-mode range of A2
extends to V– for low-side sensing.
Optional for IB Cancellation
(R7 = R6 II R8)
To Load
IL
NOTE: Low and high-side sensing circuits can be used independently.
FIGURE 1. Low and High-Side Battery Current Sensing.
®
11
OPA244, 2244, 4244
Similar pages