TOSHIBA 2SC1627_07

2SC1627
TOSHIBA Transistor
Silicon NPN Epitaxial Type (PCT process)
2SC1627
Driver Stage Amplifier Applications
Voltage Amplifier Applications
Unit: mm
•
Complementary to 2SA817
•
Driver stage application of 20 to 25 watts amplifiers.
Absolute Maximum Ratings (Ta = 25°C)
Characteristics
Symbol
Rating
Unit
Collector-base voltage
VCBO
80
V
Collector-emitter voltage
VCEO
80
V
Emitter-base voltage
VEBO
5
V
Collector current
IC
300
mA
Base current
IB
60
mA
Collector power dissipation
PC
600
mW
Junction temperature
Tj
150
°C
Tstg
55~125
°C
Storage temperature range
JEDEC
TO-92
JEITA
SC-43
Note: Using continuously under heavy loads (e.g. the application of high
temperature/current/voltage and the significant change in
TOSHIBA
2-5F1B
temperature, etc.) may cause this product to decrease in the
reliability significantly even if the operating conditions (i.e.
Weight: 0.21 g (typ.)
operating temperature/current/voltage, etc.) are within the
absolute maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Electrical Characteristics (Ta = 25°C)
Characteristics
Symbol
Test Condition
Min
Typ.
Max
Unit
Collector cut-off current
ICBO
VCB = 50 V, IE = 0
⎯
⎯
0.1
μA
Emitter cut-off current
IEBO
VEB = 5 V, IC = 0
⎯
⎯
0.1
μA
V (BR) CEO
IC = 5 mA, IB = 0
80
⎯
⎯
V
VCE = 2 V, IC = 50 mA
70
⎯
240
hFE (2)
VCE = 2 V, IC = 200 mA
40
⎯
⎯
VCE (sat)
IC = 200 mA, IB = 10 mA
⎯
⎯
0.5
V
0.55
⎯
0.8
V
VCE = 10 V, IC = 10 mA
⎯
100
⎯
MHz
VCB = 10 V, IE = 0, f = 1 MHz
⎯
10
⎯
pF
Collector-emitter saturation voltage
hFE (1)
DC current gain
Collector-emitter saturation voltage
(Note)
Base-emitter voltage
VBE
Transition frequency
fT
Collector output capacitance
Cob
VCE = 2 V, IC = 5 mA
Note: hFE (1) classification O: 70~140, Y: 120~240
1
2007-11-01
2SC1627
2
2007-11-01
2SC1627
RESTRICTIONS ON PRODUCT USE
20070701-EN GENERAL
• The information contained herein is subject to change without notice.
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc.
• The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his
document shall be made at the customer’s own risk.
• The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations.
• The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patents or other rights of
TOSHIBA or the third parties.
• Please contact your sales representative for product-by-product details in this document regarding RoHS
compatibility. Please use these products in this document in compliance with all applicable laws and regulations
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses
occurring as a result of noncompliance with applicable laws and regulations.
3
2007-11-01