TI OPA369AIDCKT 1.8v, 700na, zerã¸-crossover rail-to-rail i/o operational amplifier Datasheet

OPA369
OPA2369
www.ti.com ............................................................................................................................................ SBOS414B – AUGUST 2007 – REVISED DECEMBER 2008
1.8V, 700nA, Zerø-Crossover
RAIL-TO-RAIL I/O OPERATIONAL AMPLIFIER
FEATURES
DESCRIPTION
1
• nanoPOWER:
– OPA369: 800nA
– OPA2369: 700nA/ch.
• LOW OFFSET VOLTAGE: 250µV
– ZERO-CROSSOVER
• LOW OFFSET DRIFT: 0.4µV/°C
• DC PRECISION:
– CMRR: 114dB
– PSRR:106dB
– AOL: 134dB
• GAIN-BANDWIDTH PRODUCT: 12kHz
• SUPPLY VOLTAGE: 1.8V to 5.5V
• microSIZE PACKAGES:
– SC70-5, SOT23-5, MSOP-8
The OPA369 and OPA2369 are ultra-low-power,
low-voltage operational amplifiers from Texas
Instruments designed especially for battery-powered
applications.
2
The OPAx369 operates on a supply voltage as low as
1.8V and has true rail-to-rail operation that makes it
useful for a wide range of applications. The
zerø-crossover feature resolves the problem of input
crossover distortion that becomes very prominent in
low voltage (< 3V), rail-to-rail input applications.
In addition to microsize packages and very low
quiescent current, the OPAx369 features 12kHz
bandwidth, low offset drift (1.75µV/°C, max), and low
noise 3.6µVPP (0.1Hz to 10Hz).
The OPA369 (single version) is offered in an SC70-5
package. The OPA2369 (dual version) comes in both
MSOP-8 and SOT23-8 packages.
APPLICATIONS
•
•
•
•
•
hi laurie
BATTERY-POWERED INSTRUMENTS
PORTABLE DEVICES
MEDICAL INSTRUMENTS
TEST EQUIPMENT
LOW-POWER SENSOR SIGNAL
CONDITIONING
OFFSET VOLTAGE
vs COMMON-MODE VOLTAGE
(VS = 1.8V)
Offset Voltage
OPA369
Competition
0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
Common-Mode Voltage (V)
1
2
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2007–2008, Texas Instruments Incorporated
OPA369
OPA2369
SBOS414B – AUGUST 2007 – REVISED DECEMBER 2008 ............................................................................................................................................ www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
ABSOLUTE MAXIMUM RATINGS (1)
Over operating free-air temperature range (unless otherwise noted).
Supply Voltage
Single Input
Terminals
VS = (V+) – (V–)
VALUE
UNIT
+7
V
Voltage (2)
(V–) –0.5 to (V+) + 0.5
V
Current (2)
±10
mA
Output Short-Circuit (3)
Continuous
Ambient Operating Temperature
–55 to +125
°C
Ambient Storage Temperature
–65 to +150
°C
TJ
+150
°C
Human Body Model
(HBM)
4000
V
Charged Device Model
(CDM)
1000
V
(MM)
200
V
Junction Temperature
ESD Ratings
Machine Model
(1)
(2)
(3)
Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may
degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond
those specified is not supported.
Input terminals are diode-clamped to the power-supply rails. Input signals that can swing more than 0.5V beyond the supply rails should
be current limited to 10mA or less.
Short-circuit to VS/2, one amplifier per package.
PACKAGE/ORDERING INFORMATION (1)
PRODUCT
PACKAGE-LEAD
PACKAGE DESIGNATOR
OPA369
SC70-5
DCK
CJS
MSOP-8
DGK
OCCQ
SOT23-8
DCN
OCBQ
OPA2369
(1)
PACKAGE MARKING
For the most current package and ordering information see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com.
PIN CONFIGURATIONS
OPA369
SC70-5
(TOP VIEW)
2
+IN
1
V-
2
-IN
3
OPA2369
MSOP-8, SOT23-8
(TOP VIEW)
5
V+
4
OUT
Submit Documentation Feedback
Out A
1
8
V+
-In A
2
7
Out B
+In A
3
6
-In B
V-
4
5
+In B
Copyright © 2007–2008, Texas Instruments Incorporated
Product Folder Link(s): OPA369 OPA2369
OPA369
OPA2369
www.ti.com ............................................................................................................................................ SBOS414B – AUGUST 2007 – REVISED DECEMBER 2008
ELECTRICAL CHARACTERISTICS: VS = +1.8V to +5.5V
BOLDFACE limits apply over the specified temperature range, TA = –40°C to +85°C.
At TA = +25°C, and RL = 100kΩ connected to VS/2, unless otherwise noted.
OPA369, OPA2369
PARAMETER
CONDITIONS
MIN
TYP
MAX
UNIT
VOS
250
750
µV
1
mV
dVOS/dT
0.4
1.75
µV/°C
VS = 1.8V to 5.5V
5
20
µV/V
dc
140
dB
f = 1kHz
120
dB
OFFSET VOLTAGE
Input Offset Voltage
over Temperature
Drift
vs Power Supply
PSRR
Channel Separation
INPUT VOLTAGE RANGE
Common-Mode Voltage Range
VCM
Common-Mode Rejection Ratio
CMRR
(V–)
over Temperature
(V–) ≤ VCM ≤ (V+)
100
(V–) ≤ VCM ≤ (V+)
90
(V+)
V
114
dB
dB
INPUT BIAS CURRENT
Input Bias Current
IB
10
over Temperature
Input Offset Current
50
pA
See Figure 16
IOS
10
pA
50
pA
INPUT IMPEDANCE
Differential
Common-Mode
1013|| 3
Ω || pF
13
Ω || pF
10 || 6
NOISE
Input Voltage Noise
Input Voltage Noise Density
Current Noise Density
f = 0.1Hz to 10Hz
3.6
µVPP
f = 100Hz
220
nV/√Hz
f = 1kHz
290
nV/√Hz
f = 1kHz
1
fA/√Hz
134
dB
OPEN-LOOP GAIN
Open-Loop Voltage Gain
AOL
Over Temperature
Over Temperature
100mV ≤ VO ≤ (V+)–100mV,
RL = 100kΩ
114
100mV ≤ VO ≤ (V+)–100mV,
RL = 100kΩ
100
500mV ≤ VO ≤ (V+)–500mV,
RL = 10kΩ
114
500mV ≤ VO ≤ (V+)–500mV,
RL = 10kΩ
90
dB
134
dB
dB
OUTPUT
Voltage Output Swing from Rail
Short-Circuit Current
Capacitive Load Drive
RL = 100kΩ
10
mV
RL = 10kΩ
25
mV
ISC
CLOAD
10
mA
See Figure 20
pF
FREQUENCY RESPONSE
Gain-Bandwidth Product
Slew Rate
GBW
SR
Overload Recovery Time
12
kHz
G = +1
0.005
V/µs
VIN × Gain > VS
250
µs
Copyright © 2007–2008, Texas Instruments Incorporated
Product Folder Link(s): OPA369 OPA2369
Submit Documentation Feedback
3
OPA369
OPA2369
SBOS414B – AUGUST 2007 – REVISED DECEMBER 2008 ............................................................................................................................................ www.ti.com
ELECTRICAL CHARACTERISTICS: VS = +1.8V to +5.5V (continued)
BOLDFACE limits apply over the specified temperature range, TA = –40°C to +85°C.
At TA = +25°C, and RL = 100kΩ connected to VS/2, unless otherwise noted.
OPA369, OPA2369
PARAMETER
CONDITIONS
MIN
TYP
MAX
UNIT
5.5
V
POWER SUPPLY
Specified Voltage
VS
Quiescent Current
IQ
1.8
IOUT = 0A
OPA369
0.8
1.2
µA
OPA2369 (per channel)
0.7
1
µA
OPA369
1.45
µA
OPA2369 (per channel)
1.25
µA
Over Temperature
TEMPERATURE RANGE
Specified Range
TA
–40
+85
°C
Operating Range
TA
–55
+125
°C
Thermal Resistance
4
θ JA
SC70
250
°C/W
SOT23
223
°C/W
MSOP
252
°C/W
Submit Documentation Feedback
Copyright © 2007–2008, Texas Instruments Incorporated
Product Folder Link(s): OPA369 OPA2369
OPA369
OPA2369
www.ti.com ............................................................................................................................................ SBOS414B – AUGUST 2007 – REVISED DECEMBER 2008
TYPICAL CHARACTERISTICS
At TA = +25°C, VS = 5V, and RL = 100kΩ connected to VS/2, unless otherwise noted.
OFFSET VOLTAGE DRIFT
PRODUCTION DISTRIBUTION
-1.2
-1.1
-1.0
-0.9
-0.8
-0.7
-0.6
-0.5
-0.4
-0.3
-0.2
-0.1
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
750
600
675
450
525
300
375
150
225
0
75
-75
-150
-225
-300
-450
-375
-525
-600
-675
-750
Population
Population
OFFSET VOLTAGE
PRODUCTION DISTRIBUTION
Offset Voltage (mV)
Offset Voltage Drift (mV/°C)
Figure 1.
Figure 2.
OFFSET VOLTAGE vs TEMPERATURE
NORMALIZED OFFSET VOLTAGE
vs COMMON-MODE VOLTAGE
100
900
80
Normalized Offset Voltage (mV)
1000
700
600
500
400
300
200
100
60
40
20
0
-20
-40
-60
-80
0
-100
-75
-50
-25
0
25
50
75
100
125
-0.2
0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
2.2
2.4
2.6
2.8
3.0
3.2
3.4
3.6
3.8
4.0
4.2
4.4
4.6
4.8
5.0
5.2
|Offset Voltage| (mV)
800
VS = 5V
10 Typical Units Shown
Temperature (°C)
Common-Mode Voltage (V)
Figure 3.
Figure 4.
0.1Hz to 10Hz NOISE
INPUT-REFERRED VOLTAGE NOISE
vs FREQUENCY
1mV/div
Voltage Noise, RTI (nV/ÖHz)
10000
1000
100
10
0.1
Time (500ms/div)
1
10
100
1k
Frequency (Hz)
Figure 5.
Figure 6.
Copyright © 2007–2008, Texas Instruments Incorporated
Product Folder Link(s): OPA369 OPA2369
Submit Documentation Feedback
5
OPA369
OPA2369
SBOS414B – AUGUST 2007 – REVISED DECEMBER 2008 ............................................................................................................................................ www.ti.com
TYPICAL CHARACTERISTICS (continued)
At TA = +25°C, VS = 5V, and RL = 100kΩ connected to VS/2, unless otherwise noted.
OPEN-LOOP GAIN AND PHASE
vs FREQUENCY
OPEN-LOOP GAIN vs TEMPERATURE
140
120
RL = 10kW
RL = 100kW
2.5
GAIN
80
60
90
40
AOL (mV/V)
135
Phase (°)
100
Gain (dB)
3.0
180
2.0
1.5
1.0
PHASE
20
45
0.5
0
-20
0.001
0.01
0.1
1
10
100
1k
0
0
10k 20k
-75
-50
-25
75
100
COMMON-MODE REJECTION RATIO
vs FREQUENCY
COMMON-MODE REJECTION RATIO
vs TEMPERATURE
125
10
8
80
CMRR (mV/V)
CMRR (dB)
50
Figure 8.
100
60
40
6
4
2
20
0
0
10
100
1k
10k 20k
-75
-50
-25
0
25
50
75
100
Frequency (Hz)
Temperature (°C)
Figure 9.
Figure 10.
POWER-SUPPLY REJECTION RATIO
vs FREQUENCY
POWER-SUPPLY REJECTION RATIO
vs TEMPERATURE
125
20
110
10 Typical Units Shown
100
15
90
+PSRR
10
PSRR (mV/V)
80
PSRR (dB)
25
Figure 7.
120
70
60
50
40
30
5
0
-5
-10
-PSRR
20
-15
10
-20
0
1
6
0
Temperature (°C)
Frequency (Hz)
10
100
1k
10k 20k
-75
-50
-25
0
25
50
Frequency (Hz)
Temperature (°C)
Figure 11.
Figure 12.
Submit Documentation Feedback
75
100
125
Copyright © 2007–2008, Texas Instruments Incorporated
Product Folder Link(s): OPA369 OPA2369
OPA369
OPA2369
www.ti.com ............................................................................................................................................ SBOS414B – AUGUST 2007 – REVISED DECEMBER 2008
TYPICAL CHARACTERISTICS (continued)
At TA = +25°C, VS = 5V, and RL = 100kΩ connected to VS/2, unless otherwise noted.
OUTPUT VOLTAGE
vs OUTPUT CURRENT
2.75
OUTPUT VOLTAGE SWING-FROM-RAIL
vs TEMPERATURE
25
Output Voltage Swing-from-Rail (mV)
VS = ±2.75V
2.25
Output Voltage (V)
1.75
1.25
+25°C
+85°C
0.75
-40°C
+115°C
0.25
-0.25
-0.75
-1.25
-1.75
-2.25
RL = 10kW
15
10
5
RL = 100kW
0
RL = 100kW
-5
-10
RL = 10kW
-15
-20
-25
-2.75
0
5
10
15
20
25
30
35
40
-75
45
-50
0
-25
25
50
75
Output Current (mA)
Temperature (°C)
Figure 13.
Figure 14.
MAXIMUM OUTPUT VOLTAGE
vs FREQUENCY
INPUT BIAS CURRENT
vs TEMPERATURE
3.0
10k
2.5
1k
Input Bias Current (pA)
Maximum VOUT (V)
20
2.0
1.5
1.0
100
125
100
125
100
10
1
0.1
0.5
0.01
0
100
1k
2k
-50
-25
0
25
50
75
Frequency (Hz)
Temperature (°C)
Figure 15.
Figure 16.
QUIESCENT CURRENT vs TEMPERATURE
OPEN-LOOP OUTPUT IMPEDANCE
vs FREQUENCY
2.5
10M
100k
ZO (W)
Quiescent Current (mA)
1M
2.0
1.5
Single
10k
1k
1.0
Dual
0.5
100
10
-75
-50
-25
0
25
50
75
100
125
0
10
100
1k
Temperature (°C)
Frequency (Hz)
Figure 17.
Figure 18.
Copyright © 2007–2008, Texas Instruments Incorporated
Product Folder Link(s): OPA369 OPA2369
10k
100k
Submit Documentation Feedback
1M
7
OPA369
OPA2369
SBOS414B – AUGUST 2007 – REVISED DECEMBER 2008 ............................................................................................................................................ www.ti.com
TYPICAL CHARACTERISTICS (continued)
At TA = +25°C, VS = 5V, and RL = 100kΩ connected to VS/2, unless otherwise noted.
SMALL-SIGNAL OVERSHOOT
vs CAPACITIVE LOAD
160
20
140
18
16
120
Overshoot (%)
Channel Separation (dB)
CHANNEL SEPARATION vs FREQUENCY
100
80
60
14
12
G = -1
10
G = +1
8
6
40
4
20
2
0
0
100
1k
10k
100k
10
100
Frequency (Hz)
Capacitive Load (pF)
Figure 19.
Figure 20.
SMALL-SIGNAL STEP RESPONSE
LARGE-SIGNAL STEP RESPONSE
20mV/div
500mV/div
CL = 20pF
Time (100ms/div)
Time (250ms/div)
Figure 21.
Figure 22.
OVERLOAD RECOVERY
1V/div
Input
Output
Time (500ms/div)
Figure 23.
8
Submit Documentation Feedback
Copyright © 2007–2008, Texas Instruments Incorporated
Product Folder Link(s): OPA369 OPA2369
OPA369
OPA2369
www.ti.com ............................................................................................................................................ SBOS414B – AUGUST 2007 – REVISED DECEMBER 2008
APPLICATION INFORMATION
The OPA369 family of operational amplifiers
minimizes power consumption and operates on
supply voltages as low as 1.8V. Power-supply
rejection ratio (PSRR), common-mode rejection ratio
(CMRR), and open-loop gain (AOL) typical values are
in the range of 100dB or better.
When designing for ultralow power, choose system
components
carefully.
To
minimize
current
consumption, select large-value resistors. Any
resistors will react with stray capacitance in the circuit
and the input capacitance of the operational amplifier.
These parasitic RC combinations can affect the
stability of the overall system. A feedback capacitor
may be required to assure stability and limit
overshoot or gain peaking.
Good layout practice mandates the use of a 0.1µF
bypass capacitor placed closely across the supply
pins.
OPERATING VOLTAGE
OPA369 series op amps are fully specified and tested
from +1.8V to +5.5V (±0.9V to ±2.75V). Parameters
that vary significantly with supply voltage are shown
in the Typical Characteristic curves.
The input common-mode voltage range of the
OPA369 family typically extends to each supply rail.
CMRR is specified from the negative rail to the
positive rail. See Figure 4, Normalized Offset Voltage
vs Common-Mode Voltage.
PROTECTING INPUTS FROM
OVER-VOLTAGE
Input currents are typically 10pA. However, large
inputs (greater than 500mV beyond the supply rails)
can cause excessive current to flow in or out of the
input pins. Therefore, in addition to keeping the input
voltage between the supply rails, it is also important
to limit the input current to less than 10mA. This
limiting is easily accomplished with an input resistor,
as shown in Figure 24.
Current-limiting resistor
required if input voltage
exceeds supply rails by
³ 0.5V.
VS
IOVERLOAD
10mA max
OPA369
VOUT
VIN
5kW
INPUT COMMON-MODE VOLTAGE RANGE
The OPA369 family is designed to eliminate the input
offset transition region typically present in most
rail-to-rail
complementary
stage
operational
amplifiers, which allows the OPA369 family of
amplifiers to provide superior common-mode
performance over the entire input range.
Figure 24. Input Current Protection for Voltages
Exceeding the Supply Voltage
Copyright © 2007–2008, Texas Instruments Incorporated
Product Folder Link(s): OPA369 OPA2369
Submit Documentation Feedback
9
OPA369
OPA2369
SBOS414B – AUGUST 2007 – REVISED DECEMBER 2008 ............................................................................................................................................ www.ti.com
BATTERY MONITORING
The low operating voltage and quiescent current of
the OPA369 series make it an excellent choice for
battery monitoring applications, as shown in
Figure 25. In this circuit, VSTATUS is high as long as
the battery voltage remains above 2V. A low-power
reference is used to set the trip point. Resistor values
are selected as follows:
1. Selecting RF: Select RF such that the current
through RF is approximately 1000x larger than
the maximum bias current over temperature:
VREF
RF =
1000(IBMAX)
1.2V
1000(50pA)
= 24MW » 20MW
2. Choose the hysteresis voltage,
battery-monitoring
applications,
adequate.
3. Calculate R1 as follows:
=
(1)
VHYST. For
50mV
is
R 1 = RF
VHYST
VBATT
= 20MW 50mV = 420kW
2.4V
(2)
4. Select a threshold voltage for VIN rising (VTHRS) =
2.0V
5. Calculate R2 as follows:
1
R2 =
VTHRS
- 1 - 1
VREF ´ R1
R1 RF
(
)
1
=
(
)
2V
- 1 - 1
1.2V ´ 420kW
420kW 20MW
= 650kW
(3)
6. Calculate RBIAS: The minimum supply voltage for
this circuit is 1.8V. The REF1112 has a current
requirement of 1.2µA (max). Providing the
REF1112 with 2µA of supply current assures
proper operation. Therefore:
(V
- VREF) (1.8V - 1.2V)
RBIAS = BATTMIN
=
= 0.3MW
IBIAS
2 mA
(4)
RF
R1
+IN
+
IBIAS
VBATT
OPA369
RBIAS
OUT
VSTATUS
-IN
VREF
R2
REF1112
Figure 25. Battery Monitor
10
Submit Documentation Feedback
Copyright © 2007–2008, Texas Instruments Incorporated
Product Folder Link(s): OPA369 OPA2369
OPA369
OPA2369
www.ti.com ............................................................................................................................................ SBOS414B – AUGUST 2007 – REVISED DECEMBER 2008
WINDOW COMPARATOR
If VIN falls below VL, the output of A2 is high, current
flows through D2, and VOUT is low. Likewise, if VIN
rises above VH, the output of A1 is high, current flows
through D1, and VOUT is low. The window comparator
threshold voltages are set as follows:
R2
VH =
´ VS
R 1 + R2
(5)
Figure 26 shows the OPA2369 used as a window
comparator. The threshold limits are set by VH and
VL, with VH > VL. When VIN < VH, the output of A1 is
low. When VIN > VL, the output of A2 is low.
Therefore, both op amp outputs are at 0V as long as
VIN is between VH and VL. This architecture results in
no current flowing through either diode, Q1 in cutoff,
with the base voltage at 0V, and VOUT forced high.
VL =
R4
R 3 + R4
´V
S
(6)
VS
VS
R1
VH
A1
1/2
OPA2369
R2
D1
(2)
VS
R7
5.1kW
RIN
(1)
2kW
VOUT
R5
10kW
VIN
Q1
R6
5.1kW
VS
VS
A2
R3
VL
(3)
1/2
OPA2369
D2
(2)
R4
NOTES: (1) RIN protects A1 and A2 from possible excess current flow.
(2) IN4446 or equivalent diodes.
(3) 2N2222 or equivalent NPN transistor.
Figure 26. OPA2369 as a Window Comparator
Copyright © 2007–2008, Texas Instruments Incorporated
Product Folder Link(s): OPA369 OPA2369
Submit Documentation Feedback
11
OPA369
OPA2369
SBOS414B – AUGUST 2007 – REVISED DECEMBER 2008 ............................................................................................................................................ www.ti.com
ADDITIONAL APPLICATION EXAMPLES
Figure 27 through Figure 29 illustrate additional application examples.
VEX
R1
+5V
R R
R R
VOUT
OPA369
R1
VREF
Figure 27. Single Op Amp Bridge Amplifier
RG
zener
RSHUNT
(1)
V+
(2)
R1
10kW
MOSFET rated to
stand-off supply voltage
such as BSS84 for
up to 50V.
OPA369
V+5V
Two zener
biasing methods
(3)
are shown.
Output
Load
RBIAS
RL
NOTES: (1) Zener rated for op amp supply capability (that is, 5.1V for OPA369).
(2) Current-limiting resistor.
(3) Choose zener biasing resistor or dual NMOSFETs (FDG6301N, NTJD4001N, or Si1034)
Figure 28. High-Side Current Monitor
RG
VREF
V2
R1
R2
R2
1/2
OPA2369
R1
VOUT
1/2
OPA2369
V1
VOUT = (V1 - V2) 1 +
R1 2R1
+
+ VREF
R2
RG
Figure 29. Two Op Amp Instrumentation Amplifier
12
Submit Documentation Feedback
Copyright © 2007–2008, Texas Instruments Incorporated
Product Folder Link(s): OPA369 OPA2369
PACKAGE OPTION ADDENDUM
www.ti.com
15-Dec-2008
PACKAGING INFORMATION
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
OPA2369AIDCNR
ACTIVE
SOT-23
DCN
8
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
OPA2369AIDCNRG4
ACTIVE
SOT-23
DCN
8
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
OPA2369AIDCNT
ACTIVE
SOT-23
DCN
8
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
OPA2369AIDCNTG4
ACTIVE
SOT-23
DCN
8
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
OPA2369AIDGKR
ACTIVE
MSOP
DGK
8
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
OPA2369AIDGKRG4
ACTIVE
MSOP
DGK
8
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
OPA2369AIDGKT
ACTIVE
MSOP
DGK
8
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
OPA2369AIDGKTG4
ACTIVE
MSOP
DGK
8
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
OPA369AIDCKR
ACTIVE
SC70
DCK
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
OPA369AIDCKT
ACTIVE
SC70
DCK
5
250
CU NIPDAU
Level-2-260C-1 YEAR
Green (RoHS &
no Sb/Br)
Lead/Ball Finish
MSL Peak Temp (3)
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
12-Dec-2008
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
OPA2369AIDCNR
SOT-23
3000
179.0
DCN
8
Reel
Reel
Diameter Width
(mm) W1 (mm)
A0 (mm)
B0 (mm)
K0 (mm)
P1
(mm)
8.4
3.2
3.2
1.4
4.0
W
Pin1
(mm) Quadrant
8.0
Q3
OPA2369AIDCNT
SOT-23
DCN
8
250
179.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
OPA2369AIDGKR
MSOP
DGK
8
2500
330.0
12.4
5.3
3.4
1.4
8.0
12.0
Q1
OPA2369AIDGKT
MSOP
DGK
8
250
180.0
12.4
5.3
3.4
1.4
8.0
12.0
Q1
OPA369AIDCKR
SC70
DCK
5
3000
179.0
8.4
2.2
2.5
1.2
4.0
8.0
Q3
OPA369AIDCKT
SC70
DCK
5
250
179.0
8.4
2.2
2.5
1.2
4.0
8.0
Q3
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
12-Dec-2008
*All dimensions are nominal
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
OPA2369AIDCNR
SOT-23
DCN
8
3000
195.0
200.0
45.0
OPA2369AIDCNT
SOT-23
DCN
8
250
195.0
200.0
45.0
OPA2369AIDGKR
MSOP
DGK
8
2500
346.0
346.0
29.0
OPA2369AIDGKT
MSOP
DGK
8
250
190.5
212.7
31.8
OPA369AIDCKR
SC70
DCK
5
3000
195.0
200.0
45.0
OPA369AIDCKT
SC70
DCK
5
250
195.0
200.0
45.0
Pack Materials-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Amplifiers
Data Converters
DSP
Clocks and Timers
Interface
Logic
Power Mgmt
Microcontrollers
RFID
RF/IF and ZigBee® Solutions
amplifier.ti.com
dataconverter.ti.com
dsp.ti.com
www.ti.com/clocks
interface.ti.com
logic.ti.com
power.ti.com
microcontroller.ti.com
www.ti-rfid.com
www.ti.com/lprf
Applications
Audio
Automotive
Broadband
Digital Control
Medical
Military
Optical Networking
Security
Telephony
Video & Imaging
Wireless
www.ti.com/audio
www.ti.com/automotive
www.ti.com/broadband
www.ti.com/digitalcontrol
www.ti.com/medical
www.ti.com/military
www.ti.com/opticalnetwork
www.ti.com/security
www.ti.com/telephony
www.ti.com/video
www.ti.com/wireless
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2008, Texas Instruments Incorporated
Similar pages