TI OPA376AIDCKR Low-noise, low quiescent current, precision operational amplifier e-trim sery Datasheet

OP
A3
76
OPA
2376
OPA376
OPA2376
OPA4376
OPA
4376
www.ti.com
SBOS406F – JUNE 2007 – REVISED MARCH 2013
Low-Noise, Low Quiescent Current,
Precision Operational Amplifier
e-trim™ Series
Check for Samples: OPA376, OPA2376, OPA4376
FEATURES
DESCRIPTION
•
•
•
•
•
•
•
•
•
The OPA376 family represent a new generation of
low-noise operational amplifiers with e-trim, offering
outstanding dc precision and ac performance. Rail-torail input and output, low offset (25μV max), low noise
(7.5nV/√Hz), quiescent current of 950μA max, and a
5.5MHz bandwidth make this part very attractive for a
variety of precision and portable applications. In
addition, this device has a reasonably wide supply
range with excellent PSRR, making it attractive for
applications that run directly from batteries without
regulation.
1
23
LOW NOISE: 7.5nV/√Hz at 1kHz
0.1Hz TO 10Hz NOISE: 0.8μVPP
QUIESCENT CURRENT: 760μA (typ)
LOW OFFSET VOLTAGE: 5μV (typ)
GAIN BANDWIDTH PRODUCT: 5.5MHz
RAIL-TO-RAIL INPUT AND OUTPUT
SINGLE-SUPPLY OPERATION
SUPPLY VOLTAGE: 2.2V to 5.5V
SPACE-SAVING PACKAGES:
– SC-70, SOT23, WCSP, MSOP, TSSOP
The OPA376 (single version) is available in
MicroSIZE SC70-5, SOT23-5, and SO-8 packages.
The OPA2376 (dual) is offered in the WCSP-8,
MSOP-8, and SO-8 packages. The OPA4376 (quad)
is offered in a TSSOP-14 package. All versions are
specified for operation from –40°C to +125°C.
APPLICATIONS
•
•
•
•
•
•
ADC BUFFER
AUDIO EQUIPMENT
MEDICAL INSTRUMENTATION
HANDHELD TEST EQUIPMENT
ACTIVE FILTERING
SENSOR SIGNAL CONDITIONING
OFFSET VOLTAGE PRODUCTION DISTRIBUTION
INPUT VOLTAGE NOISE SPECTRAL DENSITY
Population
Voltage Noise (nV/ÖHz)
100
10
1
10
100
1k
Frequency (Hz)
10k
100k
-25.0
-22.5
-20.0
-17.5
-15.0
-12.5
-10.0
-7.5
-5.0
-2.5
0
2.5
5.0
7.5
10.0
12.5
15.0
17.5
20.0
22.5
25.0
1
Offset Voltage (mV)
1
2
3
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
e-trim, NanoStar, NanoFree are trademarks of Texas Instruments Incorporated.
All other trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2007–2013, Texas Instruments Incorporated
OPA376
OPA2376
OPA4376
SBOS406F – JUNE 2007 – REVISED MARCH 2013
www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
ABSOLUTE MAXIMUM RATING (1)
over operating free-air temperature range (unless otherwise noted)
Supply Voltage
Signal Input Terminals
OPA376, OPA2376, OPA4376
UNIT
+7
V
(V–) – 0.5 to (V+) + 0.5
V
±10
mA
VS = (V+) – (V–)
Voltage (2)
Current
(2)
Output Short-Circuit (3)
Continuous
Operating Temperature
TA
–40 to +150
°C
Storage Temperature
TA
–65 to +150
°C
Junction Temperature
TJ
+150
°C
Human Body Model
4000
V
Charged Device Model
1000
V
Machine Model
200
V
ESD Rating
(1)
(2)
(3)
Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may
degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond
those specified is not supported.
Input terminals are diode-clamped to the power-supply rails. Input signals that can swing more than 0.5V beyond the supply rails should
be current limited to 10mA or less.
Short-circuit to ground, one amplifier per package.
PACKAGE INFORMATION (1)
PRODUCT
PACKAGE-LEAD
PACKAGE DESIGNATOR
SC70-5
DCK
BUR
OPA376
SOT23-5
DBV
BUQ
SO-8
D
OPA376
OPA2376
SO-8
D
MSOP-8
DGK
OBBI
OPA2376
Lead- (Pb-) Free WCSP-8
YZD
OPA2376
OPA4376
TSSOP-14
PW
OPA4376
OPA2376
(1)
2
PACKAGE MARKING
For the most current package and ordering information, see the Package Option Addendum at the end of this document, or visit the
device product folder at www.ti.com.
Submit Documentation Feedback
Copyright © 2007–2013, Texas Instruments Incorporated
Product Folder Links: OPA376 OPA2376 OPA4376
OPA376
OPA2376
OPA4376
www.ti.com
SBOS406F – JUNE 2007 – REVISED MARCH 2013
ELECTRICAL CHARACTERISTICS: VS = +2.2V to +5.5V
Boldface limits apply over the specified temperature range: TA = –40°C to +125°C.
At TA = +25°C, RL = 10kΩ connected to VS/2, VCM = VS/2, and VO UT = VS/2, unless otherwise noted.
OPA376, OPA2376, OPA4376
PARAMETERS
CONDITIONS
MIN
TYP
MAX
UNIT
OFFSET VOLTAGE
Input Offset Voltage
vs Temperature
vs Power Supply
5
25
μV
–40°C to +85°C
0.26
1
μV/°C
μV/°C
VOS
dVOS/dT
–40°C to +125°C
0.32
2
VS = +2.2V to +5.5V, VCM < (V+) – 1.3V
5
20
VS = +2.2V to +5.5V, VCM < (V+) – 1.3V
5
μV/V
0.5
mV/V
PSRR
Over Temperature
Channel Separation, dc (dual, quad)
μV/V
INPUT BIAS CURRENT
Input Bias Current
IB
0.2
Over Temperature
Input Offset Current
10
pA
See Typical Characteristics
pA
0.2
pA
IOS
10
NOISE
0.8
μVPP
en
7.5
nV/√Hz
in
2
fA/√Hz
Input Voltage Noise, f = 0.1Hz to 10Hz
Input Voltage Noise Density, f = 1kHz
Input Current Noise, f = 1kHz
INPUT VOLTAGE RANGE
Common-Mode Voltage Range
VCM
Common-Mode Rejection Ratio
CMRR
(V–) – 0.1
(V–) < VCM < (V+) – 1.3 V
76
(V+) + 0.1
V
90
dB
Differential
6.5
pF
Common-Mode
13
pF
INPUT CAPACITANCE
OPEN-LOOP GAIN
Open-Loop Voltage Gain
AOL
FREQUENCY RESPONSE
Gain-Bandwidth Product
Slew Rate
50mV < VO < (V+) – 50mV, RL = 10kΩ
120
134
dB
100mV < VO < (V+) – 100mV, RL = 2kΩ
120
126
dB
CL = 100pF, VS = 5.5V
GBW
SR
5.5
MHz
G = +1
2
V/μs
Settling Time 0.1%
tS
2V Step , G = +1
1.6
μs
Settling Time 0.01%
tS
2V Step , G = +1
2
μs
VIN × Gain > VS
0.33
μs
VO = 1VRMS, G = +1, f = 1kHz, RL = 10kΩ
0.00027
%
RL = 10kΩ (1)
10
20
mV
RL = 10kΩ (2)
20
30
mV
Overload Recovery Time
THD + Noise
THD+N
OUTPUT
Voltage Output Swing from Rail
Over Temperature
RL = 10kΩ
Voltage Output Swing from Rail
Over Temperature
Short-Circuit Current
Capacitive Load Drive
Open-Loop Output Impedance
(1)
(2)
40
mV
RL = 2kΩ (1)
40
50
mV
RL = 2kΩ (2)
50
60
mV
80
mV
RL = 2kΩ
ISC
CLOAD
+30/–50
mA
See Typical Characteristics
RO
150
Ω
SC70-5, SOT23-5, SO-8, MSOP-8, and TSSOP-14 packages only.
Wafer chip-scale package only.
Copyright © 2007–2013, Texas Instruments Incorporated
Product Folder Links: OPA376 OPA2376 OPA4376
Submit Documentation Feedback
3
OPA376
OPA2376
OPA4376
SBOS406F – JUNE 2007 – REVISED MARCH 2013
www.ti.com
ELECTRICAL CHARACTERISTICS: VS = +2.2V to +5.5V (continued)
Boldface limits apply over the specified temperature range: TA = –40°C to +125°C.
At TA = +25°C, RL = 10kΩ connected to VS/2, VCM = VS/2, and VO UT = VS/2, unless otherwise noted.
OPA376, OPA2376, OPA4376
PARAMETERS
CONDITIONS
MIN
TYP
MAX
UNIT
5.5
V
950
μA
1
mA
°C
POWER SUPPLY
Specified Voltage Range
VS
2.2
Operating Voltage Range
Quiescent Current per amplifier
2 to 5.5
IQ
IO = 0, VS = +5.5V, VCM < (V+) – 1.3V
760
Over Temperature
V
TEMPERATURE RANGE
Specified Range
–40
+125
Operating Range
–40
+150
Thermal Resistance
4
θJA
°C
°C/W
SC70
250
°C/W
SOT23
200
°C/W
SO-8, TSSOP-14, MSOP-8
150
°C/W
WCSP-8
250
°C/W
Submit Documentation Feedback
Copyright © 2007–2013, Texas Instruments Incorporated
Product Folder Links: OPA376 OPA2376 OPA4376
OPA376
OPA2376
OPA4376
www.ti.com
SBOS406F – JUNE 2007 – REVISED MARCH 2013
PIN CONFIGURATIONS
OPA376
SOT23-5
(TOP VIEW)
OUT
1
V-
2
+IN
3
OPA2376
SO-8, MSOP-8
(TOP VIEW)
5
V+
4
-IN
OUT A
1
8
V+
-IN A
2
7
OUT B
+IN A
3
6
-IN B
V-
4
5
+IN B
OPA376
SC70-5
(TOP VIEW)
+IN
1
V-
2
-IN
3
OPA2376
WCSP-8
(TOP VIEW)
5
V+
4
OUT
+IN B
D2
D1
V-
-IN B
C2
C1
+IN A 2,188 mm
OUT B
B2
B1
-IN A 2,038 mm
V+
A2
A1
OUT A
OPA376
SO-8
(TOP VIEW)
NC
(1)
1
1,15 mm
8
NC
7
V+
1,00 mm
(1)
(Bump Side Down)
-IN
2
+IN
3
6
OUT
V-
4
5
NC
+
(1)
OPA4376
TSSOP-14
(TOP VIEW)
OUT A
1
14
OUT D
-IN A
2
13
-IN D
+IN A
3
12
+IN D
V+
4
11
V-
+IN B
5
10
+IN C
-IN B
6
9
-IN C
OUT B
7
8
OUT C
NOTE: (1) NC denotes no internal connection.
Copyright © 2007–2013, Texas Instruments Incorporated
Product Folder Links: OPA376 OPA2376 OPA4376
Submit Documentation Feedback
5
OPA376
OPA2376
OPA4376
SBOS406F – JUNE 2007 – REVISED MARCH 2013
www.ti.com
TYPICAL CHARACTERISTICS
At TA = +25°C, VS = +5V, RL = 10kΩ connected to VS/2, VCM = VS/2, and VO UT = VS/2, unless otherwise noted.
POWER-SUPPLY AND COMMON-MODE
REJECTION RATIO vs FREQUENCY
0
140
-20
120
-40
Gain
100
-60
Phase
80
-80
60
-100
40
-120
20
-140
0
-160
-20
0.1
1
10
100
1k
10k
100k
1M
Power-Supply Rejection Ratio (dB)
160
120
Phase Margin (°)
Open-Loop Gain (dB)
OPEN-LOOP GAIN/PHASE vs FREQUENCY
V(+) Power-Supply Rejection Ratio
100
80
Common-Mode
Rejection Ratio
60
40
V(-) Power-Supply Rejection Ratio
20
0
-180
10M
10
100
1k
10k
100k
1M
10M
Frequency (Hz)
Frequency (Hz)
Figure 1.
Figure 2.
OPEN-LOOP GAIN AND POWER-SUPPLY
REJECTION RATIO vs TEMPERATURE
0.1Hz to 10Hz
INPUT VOLTAGE NOISE
Open-Loop Gain (RL = 2kW)
140
120
500nV/div
Open-Loop Gain and PSRR (dB)
160
Power-Supply Rejection Ratio
(VS = 2.1V to 5.5V)
100
80
-50
0
-25
25
50
75
100
125
1s/div
150
Temperature (°C)
Figure 3.
Figure 4.
INPUT VOLTAGE NOISE SPECTRAL DENSITY
TOTAL HARMONIC DISTORTION + NOISE
vs FREQUENCY
1
Total Harmonic Distortion + Noise (%)
Voltage Noise (nV/ÖHz)
100
10
1
VS = 5V, VCM = 2V, VOUT = 1VRMS
0.1
0.01
Gain = 10V/V
0.001
Gain = 1V/V
0.0001
1
10
100
1k
10k
100k
10
100
Frequency (Hz)
Figure 5.
6
Submit Documentation Feedback
1k
10k
100k
Frequency (Hz)
Figure 6.
Copyright © 2007–2013, Texas Instruments Incorporated
Product Folder Links: OPA376 OPA2376 OPA4376
OPA376
OPA2376
OPA4376
www.ti.com
SBOS406F – JUNE 2007 – REVISED MARCH 2013
TYPICAL CHARACTERISTICS (continued)
At TA = +25°C, VS = +5V, RL = 10kΩ connected to VS/2, VCM = VS/2, and VO UT = VS/2, unless otherwise noted.
COMMON-MODE REJECTION RATIO
vs TEMPERATURE
QUIESCENT CURRENT
vs TEMPERATURE
1000
100
900
Quiescent Current (mA)
Common-Mode Rejection Ratio (dB)
110
90
80
70
800
700
600
60
50
500
-50
-25
0
25
50
75
100
125
150
-50
-25
0
Temperature (°C)
25
50
75
100
125
150
125
150
Temperature (°C)
Figure 7.
Figure 8.
QUIESCENT AND SHORT-CIRCUIT CURRENT
vs SUPPLY VOLTAGE
SHORT-CIRCUIT CURRENT
vs TEMPERATURE
75
50
1000
VS = ±2.75V
Quiescent Current (mA)
ISC+
30
800
IQ
700
20
10
600
0
500
2.0
2.5
3.0
3.5
4.0
4.5
5.0
Short-Circuit Current (mA)
40
900
Short-Circuit Current (mA)
50
ISC+
25
0
-25
ISC-
-50
-75
-100
-50
5.5
-25
0
25
50
75
100
Temperature (°C)
Supply Voltage (V)
Figure 9.
Figure 10.
INPUT BIAS CURRENT vs TEMPERATURE
OUTPUT VOLTAGE vs OUTPUT CURRENT
3
1000
VS = ±2.75
2
800
Output Voltage (V)
Input Bias Current (pA)
900
700
600
500
400
300
200
1
+150°C
+125°C
+25°C
-40°C
0
-1
-2
100
-3
0
-50
-25
0
25
50
75
100
125
150
0
10
20
Temperature (°C)
Figure 11.
30
40
50
60
70
80
Output Current (mA)
Figure 12.
Copyright © 2007–2013, Texas Instruments Incorporated
Product Folder Links: OPA376 OPA2376 OPA4376
Submit Documentation Feedback
7
OPA376
OPA2376
OPA4376
SBOS406F – JUNE 2007 – REVISED MARCH 2013
www.ti.com
TYPICAL CHARACTERISTICS (continued)
At TA = +25°C, VS = +5V, RL = 10kΩ connected to VS/2, VCM = VS/2, and VO UT = VS/2, unless otherwise noted.
OFFSET VOLTAGE DRIFT
PRODUCTION DISTRIBUTION
(–40°C to +125°C)
-25.0
-22.5
-20.0
-17.5
-15.0
-12.5
-10.0
-7.5
-5.0
-2.5
0
2.5
5.0
7.5
10.0
12.5
15.0
17.5
20.0
22.5
25.0
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
Population
Population
OFFSET VOLTAGE
PRODUCTION DISTRIBUTION
½Offset Voltage Drift½ (mV/°C)
Offset Voltage (mV)
Figure 13.
Figure 14.
MAXIMUM OUTPUT VOLTAGE vs FREQUENCY
6
VS = 5.5V
VS = 5V
G = +1V/V
Small-Signal Overshoot (%)
Output Voltage (VPP)
5
4
3
SMALL-SIGNAL OVERSHOOT vs LOAD CAPACITANCE
50
VS = 2.5V
2
1
40
30
20
10
0
0
1k
10k
100k
1M
10M
10
100
Frequency (Hz)
Load Capacitance (pF)
Figure 15.
Figure 16.
SMALL-SIGNAL PULSE RESPONSE
LARGE-SIGNAL PULSE RESPONSE
G = +1
RL = 2kW
CL = 50pF
1V/div
50mV/div
G = +1
RL = 10kW
CL = 50pF
Time (2ms/div)
Time (400ns/div)
Figure 17.
8
1k
Submit Documentation Feedback
Figure 18.
Copyright © 2007–2013, Texas Instruments Incorporated
Product Folder Links: OPA376 OPA2376 OPA4376
OPA376
OPA2376
OPA4376
www.ti.com
SBOS406F – JUNE 2007 – REVISED MARCH 2013
TYPICAL CHARACTERISTICS (continued)
At TA = +25°C, VS = +5V, RL = 10kΩ connected to VS/2, VCM = VS/2, and VO UT = VS/2, unless otherwise noted.
SETTLING TIME vs CLOSED-LOOP GAIN
CHANNEL SEPARATION vs FREQUENCY
140
100
Channel Separation (dB)
Settling Time (ms)
120
10
0.01%
1
0.1%
100
80
60
40
20
0
0.1
1
10
10
100
100
10k
1k
100k
Closed-Loop Gain (V/V)
Frequency (Hz)
Figure 19.
Figure 20.
1M
10M
100M
OPEN-LOOP OUTPUT RESISTANCE vs FREQUENCY
Open-Loop Output Resistance (W)
1k
100
10
400mA Load
2mA Load
1
0.1
10
100
1k
10k
100k
1M
10M
Frequency (Hz)
Figure 21.
Copyright © 2007–2013, Texas Instruments Incorporated
Product Folder Links: OPA376 OPA2376 OPA4376
Submit Documentation Feedback
9
OPA376
OPA2376
OPA4376
SBOS406F – JUNE 2007 – REVISED MARCH 2013
www.ti.com
APPLICATION INFORMATION
The OPA376 family of operational amplifiers is built
using e-trim, a proprietary technique in which offset
voltage is adjusted during the final steps of
manufacturing. This technique compensates for
performance shifts that can occur during the molding
process. Through e-trim, the OPA376 family delivers
excellent offset voltage (5μV, typ). Additionally, the
amplifier boasts a fast slew rate, low drift, low noise,
and excellent PSRR and AOL. These 5.5MHz CMOS
op amps operate on 760μA (typ) quiescent current.
R2
10kW
+5V
C1
100nF
R1
1kW
VOUT
OPA376
OPERATING CHARACTERISTICS
VIN
The OPA376 family of amplifiers has parameters that
are fully specified from 2.2V to 5.5V (±1.1V to
±2.75V). Many of the specifications apply from –40°C
to +125°C. Parameters that can exhibit significant
variance with regard to operating voltage or
temperature are presented in the Typical
Characteristics.
VCM = 2.5V
GENERAL LAYOUT GUIDELINES
Figure 22. Basic Single-Supply Connection
BASIC AMPLIFIER CONFIGURATIONS
The OPA376 family is unity-gain stable. It does not
exhibit output phase inversion when the input is
overdriven. A typical single-supply connection is
shown in Figure 22. The OPA376 is configured as a
basic inverting amplifier with a gain of –10V/V. This
single-supply connection has an output centered on
the common-mode voltage, VCM. For the circuit
shown, this voltage is 2.5V, but may be any value
within the common-mode input voltage range.
COMMON-MODE VOLTAGE RANGE
The input common-mode voltage range of the
OPA376 series extends 100mV beyond the supply
rails. The offset voltage of the amplifier is very low,
from approximately (V–) to (V+) – 1V, as shown in
Figure 23. The offset voltage increases as commonmode voltage exceeds (V+) –1V. Common-mode
rejection is specified from (V–) to (V+) – 1.3V.
3
Input Offset Voltage (mV)
For best operational performance of the device, good
printed circuit board (PCB) layout practices are
required. Low-loss, 0.1μF bypass capacitors must be
connected between each supply pin and ground,
placed as close to the device as possible. A single
bypass capacitor from V+ to ground is applicable to
single-supply applications.
2
1
0
-1
-2
-V
+V
-3
-0.5 0
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0
Input Common-Mode Voltage (V)
Figure 23. Offset and Common-Mode Voltage
10
Submit Documentation Feedback
Copyright © 2007–2013, Texas Instruments Incorporated
Product Folder Links: OPA376 OPA2376 OPA4376
OPA376
OPA2376
OPA4376
www.ti.com
SBOS406F – JUNE 2007 – REVISED MARCH 2013
INPUT AND ESD PROTECTION
The OPA376 family incorporates internal electrostatic
discharge (ESD) protection circuits on all pins. In the
case of input and output pins, this protection primarily
consists of current steering diodes connected
between the input and power-supply pins. These ESD
protection diodes also provide in-circuit, input
overdrive protection, as long as the current is limited
to 10mA as stated in the Absolute Maximum Ratings.
Figure 24 shows how a series input resistor may be
added to the driven input to limit the input current.
The added resistor contributes thermal noise at the
amplifier input and its value should be kept to a
minimum in noise-sensitive applications.
load, a voltage divider is created, introducing a gain
error at the output and slightly reducing the output
swing. The error introduced is proportional to the ratio
RS/RL, and is generally negligible at low output
current levels.
V+
RS
VOUT
OPA376
10W to
20W
VIN
RL
CL
Figure 25. Improving Capacitive Load Drive
V+
IOVERLOAD
10mA max
ACTIVE FILTERING
VOUT
OPA376
VIN
5kW
Figure 24. Input Current Protection
CAPACITIVE LOAD AND STABILITY
The OPA376 series of amplifiers may be used in
applications where driving a capacitive load is
required. As with all op amps, there may be specific
instances where the OPAx376 can become unstable,
leading to oscillation. The particular op amp circuit
configuration, layout, gain, and output loading are
some of the factors to consider when establishing
whether an amplifier will be stable in operation. An op
amp in the unity-gain (+1V/V) buffer configuration and
driving a capacitive load exhibits a greater tendency
to be unstable than an amplifier operated at a higher
noise gain. The capacitive load, in conjunction with
the op amp output resistance, creates a pole within
the feedback loop that degrades the phase margin.
The degradation of the phase margin increases as
the capacitive loading increases.
The OPAx376 in a unity-gain configuration can
directly drive up to 250pF pure capacitive load.
Increasing the gain enhances the ability of the
amplifier to drive greater capacitive loads; see the
typical characteristic plot, Small-Signal Overshoot vs
Capacitive Load. In unity-gain configurations,
capacitive load drive can be improved by inserting a
small (10Ω to 20Ω) resistor, RS, in series with the
output, as shown in Figure 25. This resistor
significantly reduces ringing while maintaining dc
performance for purely capacitive loads. However, if
there is a resistive load in parallel with the capacitive
The OPA376 series is well-suited for filter
applications requiring a wide bandwidth, fast slew
rate, low-noise, single-supply operational amplifier.
Figure 26 shows a 50kHz, 2nd-order, low-pass filter.
The components have been selected to provide a
maximally-flat Butterworth response. Beyond the
cutoff frequency, roll-off is –40dB/dec. The
Butterworth response is ideal for applications
requiring predictable gain characteristics such as the
anti-aliasing filter used ahead of an analog-to-digital
converter (ADC).
R3
5.49kW
C2
150pF
V+
R1
5.49kW
R2
12.4kW
OPA376
VIN
C1
1nF
VOUT
(V+)/2
Figure 26. Second-Order Butterworth 50kHz LowPass Filter
Copyright © 2007–2013, Texas Instruments Incorporated
Product Folder Links: OPA376 OPA2376 OPA4376
Submit Documentation Feedback
11
OPA376
OPA2376
OPA4376
SBOS406F – JUNE 2007 – REVISED MARCH 2013
www.ti.com
OPA2376 WCSP PACKAGE
The OPA2376YZD is a lead- (PB-) free, die-level,
wafer chip-scale package (WCSP). Unlike devices
that are in plastic packages, these devices have no
molding compound, lead frame, wire bonds, or leads.
Using standard surface-mount assembly procedures,
the WCSP can be mounted to a PCB without
additional underfill. Figure 27 and Figure 28 detail the
pinout and package marking. See the NanoStar™
and NanoFree™ 300μm Solder Bump WCSP
Application Note (SBVA017) for more detailed
information on package characteristics and PCB
design.
should be expected. Fluorescent lighting may
introduce noise or hum because of the time-varying
light output. Best layout practices include end-product
packaging that provides shielding from possible light
sources during operation.
DRIVING AN ANALOG-TO-DIGITAL
CONVERTER
The low noise and wide gain bandwidth of the
OPA376 family make it an ideal driver for ADCs.
Figure 29 illustrates the OPA376 driving an
ADS8327, 16-bit, 250kSPS converter. The amplifier is
connected as a unity-gain, noninverting buffer.
OPA2376YZD
Top View
(bump side down)
Not to Scale
+5V
C1
0.1mF
+5V
(1)
+IN B
D2
D1
V-
-IN B
C2
C1
+IN A
OUT B
B2
B1
-IN A
V+
A2
A1
OUT A
R1
100W
+IN
OPA376
(1)
C3
1.2nF
VIN
ADS8327
Low Power
16-Bit
500kSPS
-IN
REF IN
+5V
WCSP-8
REF5040
4.096V
Figure 27. Pin Description
OPA2376YZD
WCSP-8 Enlarged Image
Top View
(bump side down)
C4
100nF
NOTE: (1) Suggested value; may require adjustment based on
specific application.
Figure 29. Driving an ADS8327
Exact Size:
1.150mm x 2.188mm
YMDCGLS
Actual Size:
Package Marking Code:
YMD = year/month/day
CGL = indicates OPA2376YZD
S = for engineering purposes only
Figure 28. Top View Package Marking
PHOTOSENSITIVITY
Although the OPA2376YZD package has a protective
backside coating that reduces the amount of light
exposure on the die, unless fully shielded, ambient
light can reach the active region of the device. Input
bias current for the package is specified in the
absence of light. Depending on the amount of light
exposure in a given application, an increase in bias
current, and possible increases in offset voltage
12
Submit Documentation Feedback
PHANTOM-POWERED MICROPHONE
The circuit shown in Figure 30 depicts how a remote
microphone amplifier can be powered by a phantom
source on the output side of the signal cable. The
cable serves double duty, carrying both the
differential output signal from and dc power to the
microphone amplifier stage.
An OPA2376 serves as a single-ended input to a
differential output amplifier with a 6dB gain. Commonmode bias for the two op amps is provided by the dc
voltage developed across the electret microphone
element. A 48V phantom supply is reduced to 5.1V
by the series 6.8kΩ resistors on the output side of the
cable, and the 4.7kΩ and zener diode on the input
side of the cable. AC coupling blocks the different dc
voltage levels from each other on each end of the
cable.
Copyright © 2007–2013, Texas Instruments Incorporated
Product Folder Links: OPA376 OPA2376 OPA4376
OPA376
OPA2376
OPA4376
www.ti.com
SBOS406F – JUNE 2007 – REVISED MARCH 2013
An INA163 instrumentation amplifier provides
differential inputs and receives the balanced audio
signals from the cable.
The INA163 gain may be set from 0dB to 80dB by
selecting the RG value. The INA163 circuit is typical
of the input circuitry used in mixing consoles.
Phantom Power
(Provides power source for microphone)
48V
Microphone
100W
+
1mF
+
D1
5.1V
33mF
R1
2.7kW
R9
4.7kW
R8
4.7kW
R6
100W
R10
6.8kW
+
1/2
OPA2376
C2
33mF
R11
6.8kW
+15V
10mF
+
2
2
3
3
1kW
RG
INA163
10mF
+
Panasonic
WM-034CY
1kW
1
10kW
+
1
R7
100W
3.3kW
+
1/2
OPA2376
C3
33mF
3.3kW
Low-level differential audio signal
is transmitted differentially on the
same cable as power to the microphone.
-15V
10mF
Typical microphone input circuit used in mixing consoles.
Figure 30. Phantom-Powered Electret Microphone
V+ = +2.7V to 5V
Passband 300Hz to 3kHz
R9
510kW
R1
1.5kW
R2
1MW
R4
20kW
C3
33pF
C1
1000pF
1/2
OPA2376
Electret
(1)
Microphone
R3
1MW
R6
100kW
R7
51kW
R8
150kW
VREF 1
8 V+
7
1/2
OPA2376
C2
1000pF
+IN
ADS7822 6
12-Bit A/D
5
2
-IN
DCLOCK
DOUT
CS/SHDN
Serial
Interface
3
4
R5
20kW
G = 100
GND
NOTE: (1) Electret microphone powered by R1.
Figure 31. OPA2376 as a Speech Bandpass Filtered Data Acquisition System
Copyright © 2007–2013, Texas Instruments Incorporated
Product Folder Links: OPA376 OPA2376 OPA4376
Submit Documentation Feedback
13
OPA376
OPA2376
OPA4376
SBOS406F – JUNE 2007 – REVISED MARCH 2013
www.ti.com
REVISION HISTORY
NOTE: Page numbers for previous revisions may differ from page numbers in the current version.
Changes from Revision E (January 2013) to Revision F
Page
•
Changed unit (typo) for Quiescent Current feature bullet ..................................................................................................... 1
•
Changed TSSOP-14 pinout for OPA4376 ............................................................................................................................ 5
Changes from Revision D (August 2010) to Revision E
Page
•
Changed rail-to-rail feature bullet to show input and output ................................................................................................. 1
•
Changed description text to show rail-to-rail input and output ............................................................................................. 1
Changes from Revision C (October 2008) to Revision D
Page
•
Updated format of Electrical Characteristics table ................................................................................................................ 3
•
Updated Figure 11 ................................................................................................................................................................ 7
14
Submit Documentation Feedback
Copyright © 2007–2013, Texas Instruments Incorporated
Product Folder Links: OPA376 OPA2376 OPA4376
PACKAGE OPTION ADDENDUM
www.ti.com
11-Apr-2013
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
(2)
MSL Peak Temp
Op Temp (°C)
Top-Side Markings
(3)
(4)
OPA2376AID
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
-40 to 125
OPA
2376
OPA2376AIDG4
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
-40 to 125
OPA
2376
OPA2376AIDGKR
ACTIVE
VSSOP
DGK
8
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
-40 to 125
OBBI
OPA2376AIDGKRG4
ACTIVE
VSSOP
DGK
8
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
-40 to 125
OBBI
OPA2376AIDGKT
ACTIVE
VSSOP
DGK
8
250
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
-40 to 125
OBBI
OPA2376AIDGKTG4
ACTIVE
VSSOP
DGK
8
250
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
-40 to 125
OBBI
OPA2376AIDR
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
-40 to 125
OPA
2376
OPA2376AIDRG4
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
-40 to 125
OPA
2376
OPA2376AIYZDR
ACTIVE
DSBGA
YZD
8
3000
Green (RoHS
& no Sb/Br)
SNAGCU
Level-1-260C-UNLIM
-40 to 125
OPA2376
OPA2376AIYZDT
ACTIVE
DSBGA
YZD
8
250
Green (RoHS
& no Sb/Br)
SNAGCU
Level-1-260C-UNLIM
-40 to 125
OPA2376
OPA376AID
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
-40 to 125
OPA
376
OPA376AIDBVR
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
-40 to 125
BUQ
OPA376AIDBVRG4
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
-40 to 125
BUQ
OPA376AIDBVT
ACTIVE
SOT-23
DBV
5
250
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
-40 to 125
BUQ
OPA376AIDBVTG4
ACTIVE
SOT-23
DBV
5
250
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
-40 to 125
BUQ
OPA376AIDCKR
ACTIVE
SC70
DCK
5
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
-40 to 125
BUR
OPA376AIDCKRG4
ACTIVE
SC70
DCK
5
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
-40 to 125
BUR
Addendum-Page 1
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
11-Apr-2013
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
(2)
MSL Peak Temp
Op Temp (°C)
Top-Side Markings
(3)
(4)
OPA376AIDCKT
ACTIVE
SC70
DCK
5
250
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
-40 to 125
BUR
OPA376AIDCKTG4
ACTIVE
SC70
DCK
5
250
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
-40 to 125
BUR
OPA376AIDG4
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
-40 to 125
OPA
376
OPA376AIDR
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
-40 to 125
OPA
376
OPA376AIDRG4
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
-40 to 125
OPA
376
OPA4376AIPW
ACTIVE
TSSOP
PW
14
90
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
-40 to 125
OPA4376
OPA4376AIPWG4
ACTIVE
TSSOP
PW
14
90
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
-40 to 125
OPA4376
OPA4376AIPWR
ACTIVE
TSSOP
PW
14
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
-40 to 125
OPA4376
OPA4376AIPWRG4
ACTIVE
TSSOP
PW
14
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
-40 to 125
OPA4376
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
Addendum-Page 2
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
11-Apr-2013
(4)
Multiple Top-Side Markings will be inside parentheses. Only one Top-Side Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a
continuation of the previous line and the two combined represent the entire Top-Side Marking for that device.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
OTHER QUALIFIED VERSIONS OF OPA376 :
• Automotive: OPA376-Q1
NOTE: Qualified Version Definitions:
• Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects
Addendum-Page 3
PACKAGE MATERIALS INFORMATION
www.ti.com
9-Oct-2013
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
Diameter Width (mm)
(mm) W1 (mm)
B0
(mm)
K0
(mm)
P1
(mm)
W
Pin1
(mm) Quadrant
OPA2376AIDR
SOIC
D
8
2500
330.0
12.4
6.4
5.2
2.1
8.0
12.0
Q1
OPA2376AIYZDR
DSBGA
YZD
8
3000
180.0
8.4
1.24
2.29
0.81
4.0
8.0
Q1
OPA2376AIYZDR
DSBGA
YZD
8
3000
180.0
8.4
1.24
2.29
0.81
4.0
8.0
Q1
OPA2376AIYZDT
DSBGA
YZD
8
250
180.0
8.4
1.24
2.29
0.81
4.0
8.0
Q1
OPA2376AIYZDT
DSBGA
YZD
8
250
180.0
8.4
1.24
2.29
0.81
4.0
8.0
Q1
OPA376AIDBVR
SOT-23
DBV
5
3000
180.0
8.4
3.23
3.17
1.37
4.0
8.0
Q3
OPA376AIDBVR
SOT-23
DBV
5
3000
179.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
OPA376AIDBVT
SOT-23
DBV
5
250
179.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
OPA376AIDBVT
SOT-23
DBV
5
250
180.0
8.4
3.23
3.17
1.37
4.0
8.0
Q3
OPA376AIDCKR
SC70
DCK
5
3000
179.0
8.4
2.2
2.5
1.2
4.0
8.0
Q3
OPA376AIDCKR
SC70
DCK
5
3000
178.0
9.0
2.4
2.5
1.2
4.0
8.0
Q3
OPA376AIDCKT
SC70
DCK
5
250
178.0
9.0
2.4
2.5
1.2
4.0
8.0
Q3
OPA376AIDCKT
SC70
DCK
5
250
179.0
8.4
2.2
2.5
1.2
4.0
8.0
Q3
OPA376AIDR
SOIC
D
8
2500
330.0
12.4
6.4
5.2
2.1
8.0
12.0
Q1
OPA4376AIPWR
TSSOP
PW
14
2000
330.0
12.4
6.9
5.6
1.6
8.0
12.0
Q1
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
9-Oct-2013
*All dimensions are nominal
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
OPA2376AIDR
SOIC
D
8
2500
367.0
367.0
35.0
OPA2376AIYZDR
DSBGA
YZD
8
3000
182.0
182.0
17.0
OPA2376AIYZDR
DSBGA
YZD
8
3000
220.0
220.0
34.0
OPA2376AIYZDT
DSBGA
YZD
8
250
220.0
220.0
34.0
OPA2376AIYZDT
DSBGA
YZD
8
250
182.0
182.0
17.0
OPA376AIDBVR
SOT-23
DBV
5
3000
202.0
201.0
28.0
OPA376AIDBVR
SOT-23
DBV
5
3000
195.0
200.0
45.0
OPA376AIDBVT
SOT-23
DBV
5
250
195.0
200.0
45.0
OPA376AIDBVT
SOT-23
DBV
5
250
202.0
201.0
28.0
OPA376AIDCKR
SC70
DCK
5
3000
195.0
200.0
45.0
OPA376AIDCKR
SC70
DCK
5
3000
180.0
180.0
18.0
OPA376AIDCKT
SC70
DCK
5
250
180.0
180.0
18.0
OPA376AIDCKT
SC70
DCK
5
250
195.0
200.0
45.0
OPA376AIDR
SOIC
D
8
2500
367.0
367.0
35.0
OPA4376AIPWR
TSSOP
PW
14
2000
367.0
367.0
35.0
Pack Materials-Page 2
D: Max = 2.178 mm, Min =2.118 mm
E: Max = 1.14 mm, Min = 1.08 mm
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products
Applications
Audio
www.ti.com/audio
Automotive and Transportation
www.ti.com/automotive
Amplifiers
amplifier.ti.com
Communications and Telecom
www.ti.com/communications
Data Converters
dataconverter.ti.com
Computers and Peripherals
www.ti.com/computers
DLP® Products
www.dlp.com
Consumer Electronics
www.ti.com/consumer-apps
DSP
dsp.ti.com
Energy and Lighting
www.ti.com/energy
Clocks and Timers
www.ti.com/clocks
Industrial
www.ti.com/industrial
Interface
interface.ti.com
Medical
www.ti.com/medical
Logic
logic.ti.com
Security
www.ti.com/security
Power Mgmt
power.ti.com
Space, Avionics and Defense
www.ti.com/space-avionics-defense
Microcontrollers
microcontroller.ti.com
Video and Imaging
www.ti.com/video
RFID
www.ti-rfid.com
OMAP Applications Processors
www.ti.com/omap
TI E2E Community
e2e.ti.com
Wireless Connectivity
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2013, Texas Instruments Incorporated
Similar pages