Burr-Brown OPA4342UA Low cost, low power, rail-to-rail operational amplifiers microamplifier â ¢ sery Datasheet

OPA342
OPA2342
OPA4342
®
OPA
434
2
OPA
342
OPA
234
2
®
OPA
OPA
434
2
342
For most current data sheet and other product
information, visit www.burr-brown.com
Low Cost, Low Power, Rail-to-Rail
OPERATIONAL AMPLIFIERS
MicroAmplifier ™ Series
FEATURES
DESCRIPTION
LOW QUIESCENT CURRENT: 150µA typ
RAIL-TO-RAIL INPUT
RAIL-TO-RAIL OUTPUT (within 1mV)
SINGLE SUPPLY CAPABILITY
LOW COST
MicroSIZE PACKAGE OPTIONS:
SOT23-5
MSOP-8
TSSOP-14
● BANDWIDTH: 1MHz
● SLEW RATE: 1V/µs
● THD + NOISE: 0.006%
The OPA342 series rail-to-rail CMOS operational
amplifiers are designed for low cost, low power,
miniature applications. They are optimized to operate
on a single supply as low as 2.5V with an input
common-mode voltage range that extends 300mV
beyond the supplies.
Rail-to-rail input/output and high-speed operation make
them ideal for driving sampling Analog-to-Digital Converters (ADC). They are also well suited for general
purpose and audio applicaitons and providing I/V conversion at the output of Digital-to-Analog Converters
(DAC). Single, dual and quad versions have identical
specs for design flexibility.
The OPA342 series offers excellent dynamic response
with a quiescent current of only 250µA max. Dual and
quad designs feature completely independent circuitry
for lowest crosstalk and freedom from interaction.
●
●
●
●
●
●
APPLICATIONS
●
●
●
●
●
●
●
●
COMMUNICATIONS
PCMCIA CARDS
DATA ACQUISITION
PROCESS CONTROL
AUDIO PROCESSING
ACTIVE FILTERS
TEST EQUIPMENT
CONSUMER ELECTRONICS
PACKAGE
SINGLE
OPA342
SOT23-5
✔
QUAD
OPA4342
✔
MSOP-8
SO-8
DUAL
OPA2342
✔
✔
TSSOP-14
✔
SO-14
✔
DIP-14
✔
SPICE MODEL available at www.burr-brown.com.
International Airport Industrial Park • Mailing Address: PO Box 11400, Tucson, AZ 85734 • Street Address: 6730 S. Tucson Blvd., Tucson, AZ 85706 • Tel: (520) 746-1111
Twx: 910-952-1111 • Internet: http://www.burr-brown.com/ • Cable: BBRCORP • Telex: 066-6491 • FAX: (520) 889-1510 • Immediate Product Info: (800) 548-6132
© 1999 Burr-Brown Corporation
PDS-1485B
Printed in U.S.A. June, 2000
SPECIFICATIONS: VS = 2.7V to 5.5V
At TA = +25°C, RL = 10kΩ connected to VS /2 and VOUT = VS /2, unless otherwise noted.
Boldface limits apply over the temperature range, TA = –40°C to +85°C.
OPA342NA, UA
OPA2342EA, UA
OPA4342EA, UA, PA
PARAMETER
CONDITION
OFFSET VOLTAGE
Input Offset Voltage
TA = –40°C to +85°C
vs Temperature
vs Power Supply
TA = –40°C to +85°C
Channel Separation, dc
f = 1kHz
VS = 2.7V to 5.5V, VCM < (V+) -1.8V
VS = 2.7V to 5.5V, VCM < (V+) -1.8V
200
250
8
30
0.5
VCM
CMRR
CMRR
CMRR
VS = +5.5V, –0.3V < VCM < (V+) - 1.8
VS = +5.5V, –0.3V < VCM < (V+) - 1.8
VS = +5.5V, –0.3V < VCM < 5.8V
VS = +5.5V, –0.3V < VCM < 5.8V
VS = +2.7V, –0.3V < VCM < 3V
VS = +2.7V, –0.3V < VCM < 3V
AOL
RL
RL
RL
RL
= 100kΩ, 10mV < VO < (V+) – 10mV
= 100kΩ, 10mV < VO < (V+) – 10mV
= 5kΩ, 400mV < VO < (V+) – 400mV
= 5kΩ, 400mV < VO < (V+) – 400mV
FREQUENCY RESPONSE
Gain-Bandwidth Product
GBW
Slew Rate
SR
Settling Time, 0.1%
0.01%
Overload Recovery Time
Total Harmonic Distortion + Noise, f = 1kHz THD+N
OUTPUT
Voltage Output Swing from Rail(2)
TA = –40°C to +85°C
TEMPERATURE RANGE
Specified Range
Operating Range
Storage Range
Thermal Resistance
SOT23-5 Surface Mount
MSOP-8 Surface Mount
SO-8 Surface Mount
TSSOP-14 Surface Mount
SO-14 Surface Mount
DIP-14
mV
mV
µV/°C
µV/V
µV/V
µV/V
dB
30
en
in
TA = –40°C to +85°C
POWER SUPPLY
Specified Voltage Range
Operating Voltage Range
Quiescent Current (per amplifier)
TA = –40°C to +85°C
±6
±6
IOS
–0.3
76
74
66
64
62
60
INPUT IMPEDANCE
Differential
Common-Mode
TA = –40°C to +85°C
Short-Circuit Current
Capacitive Load Drive
UNITS
±1
±3
±0.2
See Typical Curve
±0.2
IB
NOISE
Input Voltage Noise, f = 0.1Hz to 50kHz
Input Voltage Noise Density, f = 1kHz
Current Noise Density, f = 1kHz
OPEN-LOOP GAIN
Open-Loop Voltage Gain
TA = –40°C to +85°C
MAX
0.2
132
INPUT BIAS CURRENT
Input Bias Current
TA = –40°C to +85°C
Input Offset Current
INPUT VOLTAGE RANGE
Common-Mode Voltage Range
Common-Mode Rejection Ratio
TA = –40°C to +85°C
Common-Mode Rejection Ratio
TA = –40°C to +85°C
Common-Mode Rejection Ratio
TA = –40°C to +85°C
TYP
±1
VCM = VS /2
VOS
dVOS/dT
PSRR
MIN
I SC
CLOAD
CL = 100pF
G=1
RL = 100kΩ, AOL ≥ 96dB
RL = 100kΩ, AOL ≥ 104dB
RL = 100kΩ, AOL ≥ 100dB
RL = 5kΩ, AOL ≥ 96dB
RL = 5kΩ, AOL ≥ 90dB
Per Channel
(V+) + 0.3
78
74
Ω || pF
Ω || pF
124
dB
dB
dB
dB
114
20
10
10
400
400
5.5
2.5 to 5.5
150
θJA
200
150
150
100
100
100
NOTE: (1) VOUT = 0.25V to 3.25V. (2) Output voltage swings are measured between the output and power-supply rails.
2
MHz
V/µs
µs
µs
µs
%
±15
See Typical Curve
–40
–55
–65
OPA342, 2342, 4342
V
dB
dB
dB
dB
dB
dB
1013 || 3
1013 || 6
1
3
IO = 0A
pA
pA
pA
µVrms
nV/√Hz
fA/√Hz
88
2.7
®
±10
1
1
5
8
2.5
0.006
VS = 5.5V, 2V Step
VS = 5.5V, 2V Step
VIN • G = VS
VS = 5.5V, VO = 3Vp-p(1), G = 1
VS
IQ
104
100
96
90
±10
mV
mV
mV
mV
mV
mA
250
300
V
V
µA
µA
+85
+125
+150
°C
°C
°C
°C/W
°C/W
°C/W
°C/W
°C/W
°C/W
ABSOLUTE MAXIMUM RATINGS(1)
ELECTROSTATIC
DISCHARGE SENSITIVITY
Supply Voltage, V+ to V- ................................................................... 7.5V
Signal Input Terminals, Voltage(2) ..................... (V–) –0.5V to (V+) +0.5V
Current(2) .................................................... 10mA
Output Short-Circuit(3) .............................................................. Continuous
Operating Temperature .................................................. –55°C to +125°C
Storage Temperature ..................................................... –65°C to +150°C
Junction Temperature ...................................................................... 150°C
Lead Temperature (soldering, 10s) ................................................. 300°C
ESD Tolerance (Human Body Model) ............................................ 4000V
This integrated circuit can be damaged by ESD. Burr-Brown
recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling
and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits
may be more susceptible to damage because very small
parametric changes could cause the device not to meet its
published specifications.
NOTES: (1) Stresses above these ratings may cause permanent damage.
Exposure to absolute maximum conditions for extended periods may
degrade device reliability. These are stress ratings only. Functional operation of the device at these conditions, or beyond the specified operating
conditions, is not implied. (2) Input terminals are diode-clamped to the power
supply rails. Input signals that can swing more than 0.5V beyond the supply
rails should be current-limited to 10mA or less. (3) Short-circuit to ground,
one amplifier per package.
PACKAGE/ORDERING INFORMATION
PRODUCT
PACKAGE
PACKAGE
DRAWING
NUMBER
OPA342NA
SOT23-5
331
–40°C to +85°C
B42
"
"
"
"
OPA342UA
"
OPA342UA
SPECIFIED
TEMPERATURE
RANGE
PACKAGE
MARKING
ORDERING
NUMBER(1)
TRANSPORT
MEDIA
OPA342NA /250
OPA342NA /3K
OPA342UA
OPA342UA /2K5
Tape and Reel
Tape and Reel
Rails
Tape and Reel
OPA2342EA /250
OPA2342EA /2K5
OPA2342UA
OPA2342UA /2K5
Tape and Reel
Tape and Reel
Rails
Tape and Reel
OPA4342EA /250
OPA4342EA /2K5
OPA4342UA
OPA4342UA /2K5
OPA4342PA
Tape and Reel
Tape and Reel
Rails
Tape and Reel
Rails
SO-8
182
–40°C to +85°C
"
"
"
"
"
OPA2342EA
MSOP-8
337
–40°C to +85°C
C42
"
"
"
"
"
OPA2342UA
SO-8
182
–40°C to +85°C
OPA2342UA
"
"
"
"
"
OPA4342EA
TSSOP-14
357
–40°C to +85°C
OPA4342EA
"
"
"
"
"
OPA4342UA
SO-14
235
–40°C to +85°C
OPA4342UA
"
"
"
"
"
OPA4342PA
DIP-14
010
–40°C to +85°C
OPA4342PA
NOTE: (1) Models with a slash (/) are available only in Tape and Reel in the quantities indicated (e.g., /3K indicates 3000 devices per reel). Ordering 3000 pieces
of “OPA342NA/3K” will get a single 3000-piece Tape and Reel.
®
3
OPA342, 2342, 4342
TYPICAL PERFORMANCE CURVES
At TA = +25°C, VS = +5V, and RL = 10kΩ connected to VS/2, unless otherwise noted.
POWER SUPPLY AND COMMON-MODE
REJECTION RATIO vs FREQUENCY
OPEN-LOOP GAIN/PHASE vs FREQUENCY
120
100
100
30
80
+PSRR
Rejection Ratio (dB)
Phase
80
60
60
90
40
120
Phase (°)
Gain (dB)
0
Gain
20
0.1
1
10
100
1k
10k
100k
1M
–PSRR
60
40
20
150
0
CMRR
10
180
10M
10
100
VS = +5.5V
5
Channel Separation (dB)
Maximum Output Voltage (Vp-p)
100k
140
VS = +5V
4
3
VS = +2.7V
2
1
0
120
100
Dual and quad devices.
G = 1, all channels.
Quad measured channel
A to D or B to C—other
combinations yield improved
rejection.
80
60
100k
10k
100
1M
100k
VOLTAGE AND CURRENT NOISE
SPECTRAL DENSITY vs FREQUENCY
TOTAL HARMONIC DISTORTION + NOISE
vs FREQUENCY
VN
1
100
10
100
1k
10k
100k
1M
0.1
THD+N (%)
10
0.1
10M
0.010
0.001
20
Frequency (Hz)
100
1k
Frequency (Hz)
®
OPA342, 2342, 4342
1M
1
Current Noise (fA/√Hz)
IN
1000
10
10k
Frequency (Hz)
100
1
1k
Frequency (Hz)
10000
Voltage Noise (nV/√Hz)
10k
CHANNEL SEPARATION vs FREQUENCY
MAXIMUM OUTPUT VOLTAGE vs FREQUENCY
6
1k
Frequency (Hz)
Frequency (Hz)
4
10k
20k
TYPICAL PERFORMANCE CURVES (Cont.)
At TA = +25°C, VS = +5V, and RL = 10kΩ connected to VS/2, unless otherwise noted.
OPEN-LOOP GAIN, COMMON-MODE REJECTION RATIO,
AND POWER SUPPLY REJECTION vs TEMPERATURE
INPUT BIAS CURRENT vs TEMPERATURE
140
10000
AOL
Input Bias Current (pA)
AOL, CMRR, PSRR (dB)
120
100
CMRR
80
PSRR
60
40
20
0
1000
100
10
1
0.1
–75
–50
–25
0
25
50
75
100
125
150
–75
–50
–25
Temperature (°C)
0
25
50
75
100
125
Temperature (°C)
QUIESCENT CURRENT AND
SHORT-CIRCUIT CURRENT vs TEMPERATURE
SLEW RATE vs TEMPERATURE
200
40
1.2
35
1
150
30
135
25
+ISC
20
100
–ISC
75
15
50
10
25
5
0
–75
–50
0
–25
25
50
75
100
Slew Rate (V/µs)
Quiescent Current (µA)
IQ
Short-Circuit Current (mA)
–SR
175
0.8
+SR
0.6
0.4
0.2
0
0
125
–75
–50
–25
0
25
50
75
100
Temperature (°C)
Temperature (°C)
INPUT BIAS CURRENT
vs COMMON-MODE VOLTAGE
QUIESCENT CURRENT AND
SHORT-CIRCUIT CURRENT vs SUPPLY VOLTAGE
125
160
6
20
V–
Supply
2
V+
Supply
Quiescent Current (µA)
Input Bias Current (pA)
4
0
–2
Input voltage ≤ –0.3V
can cause op amp output
to lock up. See text.
–4
155
15
–ISC
150
10
IQ
145
5
140
–6
–1
0
1
2
3
4
5
0
2
6
Short-Circuit Current (mA)
+ISC
3
4
5
6
Supply Voltage (V)
Common-Mode Voltage (V)
®
5
OPA342, 2342, 4342
TYPICAL PERFORMANCE CURVES (Cont.)
At TA = +25°C, VS = +5V, and RL = 10kΩ connected to VS/2, unless otherwise noted.
OPEN-LOOP GAIN vs OUTPUT VOLTAGE SWING
OUTPUT VOLTAGE SWING vs OUTPUT CURRENT
V+
120
(V+) – 2
2
85°C
25°C
≈
Open-Loop Gain (dB)
–40°C
≈
25°C
–40°C
1
85°C
0
10
15
RL = 100kΩ
100
RL = 5kΩ
90
120
20
100
80
60
40
20
Output Current (mA)
Output Voltage Swing from Rail (mV)
OFFSET VOLTAGE
PRODUCTION DISTRIBUTION
OFFSET VOLTAGE DRIFT
PRODUCTION DISTRIBUTION
24
0
18
Typical production
distribution of
packaged units.
Typical production
distribution of
packaged units.
16
Percent of Amplifiers (%)
20
Percent of Amplifiers (%)
110
80
5
0
16
12
8
4
14
12
10
8
6
4
2
0
–6
–5.4
–4.8
–4.2
–3.6
–3
–2.4
–1.8
–1.2
–0.6
0
0.6
1.2
1.8
2.4
3
3.6
4.2
4.8
5.4
6
–10
–9
–8
–7
–6
–5
–4
–3
–2
–1
0
1
2
3
4
5
6
7
8
9
10
0
Offset Voltage (mV)
Offset Voltage Drift (µV/°C)
QUIESCENT CURRENT
PRODUCTION DISTRIBUTION
SETTLING TIME vs CLOSED-LOOP GAIN
24
400
350
20
Settling Time (µs)
300
16
12
8
250
0.01%
200
150
100
0.1%
4
50
0
<250
<225
<200
<175
<150
<125
<100
<75
<50
<25
0
<0
Percent of Amplifiers (%)
Output Voltage (V)
(V+) – 1
1
Quiescent Current (µA)
®
OPA342, 2342, 4342
10
100
Closed-Loop Gain (V/V)
6
1000
TYPICAL PERFORMANCE CURVES (Cont.)
At TA = +25°C, VS = +5V, and RL = 10kΩ connected to VS/2, unless otherwise noted.
LARGE-SIGNAL STEP RESPONSE
G = +1, RL = 10kΩ, CL = 100pF
SMALL-SIGNAL OVERSHOOT vs LOAD CAPACITANCE
50
40
35
1V/div
G = +1
30
G = +5
25
G = –1
20
15
10
G = –5
5
0
1
10
100
1k
10k
5µs/div
Load Capacitance (pF)
SMALL-SIGNAL STEP RESPONSE
G = +1, RL = 10kΩ, CL = 100pF
20mV/div
Small-Signal Overshoot (%)
45
5µs/div
®
7
OPA342, 2342, 4342
APPLICATIONS INFORMATION
OPERATING VOLTAGE
OPA342 series op amps are fully specified and guaranteed
from +2.7V to +5.5V. In addition, many specifications apply
from –40ºC to +85ºC. Parameters that vary significantly
with operating voltages or temperature are shown in the
Typical Performance Curves.
OPA342 series op amps are unity gain stable and can operate
on a single supply, making them highly versatile and easy to
use.
Rail-to-rail input and output swing significantly increases
dynamic range, especially in low supply applications. Figure
1 shows the input and output waveforms for the OPA342 in
unity-gain configuration. Operation is from VS = +5V with
a 10kΩ load connected to VS /2. The input is a 5Vp-p
sinusoid. Output voltage is approximately 4.997Vp-p.
RAIL-TO-RAIL INPUT
The input common-mode voltage range of the OPA342
series extends 300mV beyond the supply rails. This is
achieved with a complementary input stage—an N-channel
input differential pair in parallel with a P-channel differential pair (see Figure 2). The N-channel pair is active for input
voltages close to the positive rail, typically (V+) – 1.3V to
300mV above the positive supply, while the P-channel pair
is on for inputs from 300mV below the negative supply to
approximately (V+) –1.3V. There is a small transition region, typically (V+) – 1.5V to (V+) – 1.1V, in which both
pairs are on. This 400mV transition region can vary 300mV
with process variation. Thus, the transition region (both
stages on) can range from (V+) – 1.8V to (V+) – 1.4V on the
low end, up to (V+) – 1.2V to (V+) – 0.8V on the high end.
Within the 400mV transition region PSRR, CMRR, offset
voltage, offset drift, and THD may be degraded compared to
operation outside this region. For more information on
designing with rail-to-rail input op amps, see Figure 3
“Design Optimization with Rail-to-Rail Input Op Amps.”
Power supply pins should be by passed with 0.01pF ceramic
capacitors.
G = +1, VS = +5V
Input
1V/div
5V
0V
Output (inverted on scope)
5µs/div
FIGURE 1. Rail-to-Rail Input and Output.
V+
Reference
Current
VIN+
VIN–
VBIAS1
VBIAS2
V–
(Ground)
FIGURE 2. Simplified Schematic.
®
OPA342, 2342, 4342
8
Class AB
Control
Circuitry
VO
DESIGN OPTIMIZATION WITH RAIL-TO-RAIL INPUT OP AMPS
Rail-to-rail op amps can be used in virtually any op amp
configuration. To achieve optimum performance, however, applications using these special double-input-stage
op amps may benefit from consideration of their special
behavior.
With a unity-gain buffer, for example, signals will traverse
this transition at approximately 1.3V below V+ supply
and may exhibit a small discontinuity at this point.
The common-mode voltage of the non-inverting amplifier is equal to the input voltage. If the input signal always
remains less than the transition voltage, no discontinuity
will be created. The closed-loop gain of this configuration can still produce a rail-to-rail output.
Inverting amplifiers have a constant common-mode voltage equal to VB. If this bias voltage is constant, no
discontinuity will be created. The bias voltage can generally be chosen to avoid the transition region.
In many applications, operation remains within the common-mode range of only one differential input pair.
However some applications exercise the amplifier through
the transition region of both differential input stages.
Although the two input stages are laser trimmed for
excellent matching, a small discontinuity may occur in
this transition. Careful selection of the circuit configuration, signal levels and biasing can often avoid this transition region.
G = 1 Buffer
Non-Inverting Gain
V+
Inverting Amplifier
V+
VB
VO
VIN
V+
VIN
VO
VO
VIN
VB
VCM = VIN = VO
VCM = VIN
VCM = VB
FIGURE 3. Design Optimization with Rail-to-Rail Input Op Amps.
COMMON-MODE REJECTION
The CMRR for the OPA342 is specified in several ways so
the best match for a given application may be used. First, the
CMRR of the device in the common-mode range below the
transition region (VCM < (V+) – 1.8V) is given. This specification is the best indicator of the capability of the device
when the application requires use of one of the differential
input pairs. Second, the CMRR at VS = 5.5V over the entire
common-mode range is specified. Third, the CMRR at VS =
2.7V over the entire common-mode range is provided. These
last two values include the variations seen through the
transition region.
between V+ and ground. For light resistive loads (> 50kΩ),
the output voltage can typically swing to within 1mV from
supply rail. With moderate resistive loads (2kΩ to 50kΩ),
the output can swing to within a few tens of milli-volts from
the supply rails while maintaining high open-loop gain. See
the typical performance curve “Output Voltage Swing vs
Output Current.”
V+
IOVERLOAD
10mA max
INPUT VOLTAGE BEYOND THE RAILS
OPA342
VOUT
VIN
If the input voltage can go more than 0.3V below the
negative power supply rail (single-supply ground), special
precautions are required. If the input voltage goes sufficiently negative, the op amp output may lock up in an
inoperative state. A Schottky diode clamp circuit will prevent this—see Figure 4. The series resistor prevents excessive current (greater than 10mA) in the Schottky diode and
in the internal ESD protection diode, if the input voltage can
exceed the positive supply voltage. If the signal source is
limited to less than 10mA, the input resistor is not required.
1kΩ
IN5818
Schottky diode is required only
if input voltage can go more
than 0.3V below ground.
FIGURE 4. Input Current Protection for Voltages Exceeding the Supply Voltage.
CAPACITIVE LOAD AND STABILITY
The OPA342 in a unity-gain configuration can directly drive
up to 250pF pure capacitive load. Increasing the gain enhances the amplifier’s ability to drive greater capacitive
loads. See the typical performance curve “Small-Signal
RAIL-TO-RAIL OUTPUT
A class AB output stage with common-source transistors is
used to achieve rail-to-rail output. This output stage is
capable of driving 600Ω loads connected to any potential
®
9
OPA342, 2342, 4342
DRIVING A/D CONVERTERS
The OPA342 series op amps are optimized for driving
medium-speed sampling ADCs. The OPA342 op amps buffer
the ADC’s input capacitance and resulting charge injection
while providing signal gain.
Overshoot vs Capacitive Load.” In unity-gain configurations, capacitive load drive can be improved by inserting a
small (10Ω to 20Ω) resistor, RS, in series with the output, as
shown in Figure 5. This significantly reduces ringing while
maintaining dc performance for purely capacitive loads.
However, if there is a resistive load in parallel with the
capacitive load, a voltage divider is created, introducing a dc
error at the output and slightly reducing the output swing.
The error introduced is proportional to the ratio RS / RL, and
is generally negligible.
Figures 6 shows the OPA342 in a basic noninverting configuration driving the ADS7822. The ADS7822 is a 12-bit,
micro-power sampling converter in the MSOP-8 package.
When used with the low-power, miniature packages of the
OPA342, the combination is ideal for space-limited, lowpower applications. In this configuration, an RC network at
the ADC’s input can be used to filter charge injection.
Figure 7 shows the OPA2342 driving an ADS7822 in a
speech bandpass filtered data acquisition system. This small,
low-cost solution provides the necessary amplification and
signal conditioning to interface directly with an electret
microphone. This circuit will operate with VS = +2.7V to
+5V with less than 500µA quiescent current.
V+
RS
VOUT
OPA342
10Ω to
20Ω
VIN
RL
CL
FIGURE 5. Series Resistor in Unity-Gain Configuration
Improves Capacitive Load Drive.
+5V
0.1µF
0.1µF
1 VREF
8 V+
DCLOCK
500Ω
+In
OPA342
ADS7822
12-Bit A/D
2
VIN
DOUT
–In
CS/SHDN
3
3300pF
7
6
Serial
Interface
5
GND 4
VIN = 0V to 5V for
0V to 5V output.
NOTE: A/D Input = 0 to VREF
RC network filters high frequency noise.
FIGURE 6. OPA342 in Noninverting Configuration Driving ADS7822.
V+ = +2.7V to 5V
Passband 300Hz to 3kHz
R9
510kΩ
R1
1.5kΩ
R2
1MΩ
R4
20kΩ
C3
33pF
C1
1000pF
1/2
OPA2342
Electret
Microphone(1)
R3
1MΩ
R6
100kΩ
R7
51kΩ
R8
150kΩ
VREF 1
8 V+
7
C2
1000pF
1/2
OPA2342
+IN
ADS7822 6
12-Bit A/D
5
2
–IN
3
4
NOTE: (1) Electret microphone
powered by R1.
R5
20kΩ
G = 100
GND
FIGURE 7. Speech Bandpass Filtered Data Acquisition System.
®
OPA342, 2342, 4342
10
DCLOCK
DOUT
CS/SHDN
Serial
Interface
Similar pages