Emcore OTP-1ETR-A2/A2 Dwdm wideband optical link Datasheet

OTS-1LD
DWDM Wideband Optical Link
DATASHEET | DECEMBER 2012
SATCOM
50 MHz to 2500 MHz DWDM Wideband Optical Link
Optiva Wideband fiber-optic links are optimized to perform
in the 50 to 3000 MHz frequency range providing transparent
signal transportation for satellite antenna applications. The
unique features of the OTS-1LD series include simple push
button peaking for optimum performance and our
patent-pending SmartGain™ Control, which ensures consistent
performance over varied signal conditions. As with all EMCORE
optical products, the highest quality components and modern production techniques insure that intra-facility links provide the highest performance as a cost-
Features
effective alternative to coaxial cable. They provide much longer
„„ 50 to 2500 MHz Optimized for IF, L and
transmission distances than copper cables, simplify network design, ease installa-
S-band Satellite Signals
tion and even enhance immunity from EMI, RFI and lightning. These transmitters
and receivers take the high RF performance and diverse features of EMCORE’s
„„ Supports 100 km Links
„„ Supports 1310/1550 nm and 36-Channel DWDM
Ortel technology and combine them into a compact package
compatible with the Optiva Family of OT-CC and OT-DTCR enclosures.
„„ 30 dB Tx Adjustable Gain Range
System Design
„„ 30 dB Rx Adjustable Gain Range
Optiva is a completely modular hot-swappable platform. Both 19” rack mount
„„ Peak Optimizer for Quick and Easy Setup
and compact tabletop or wall-mountable enclosures are available. The 19”
rack-mount enclosure (Model OT-CC-16F-XXX) can support up to 16 insert
„„ 50 & 75 Ohm BNC or 50 Ohm SMA
cards and provides a single power supply (Model PS-200), or a dual-redun-
„„ SmartGain™ for Enhanced AGC Performance
„„ Tx & Rx RF Power Monitors Via LED, SMA & SNMP
dant, hot-swappable power supply option. Compact enclosures are available with 1, 2 or 6 slots. The one slot (OT-DTCR-1) and two slot (OT-DTCR-2)
enclosures both use an external power supply (PS-9012) and optionally have
a standard 2-pin DC power connector for more custom applications. Like the
OT-CC-16F the six-slot 1 RU enclosure (OT-CC-6) has hot swap redundant pow-
„„ LNB Power
er supply. The Optiva family’s existing wide range of video, audio and data
„„ SNMP Monitoring and Control
transport products include a unique Daisy-Chain™ feature that multiplexes
multiple electrical inputs onto a single fiber, thus resulting in an extremely
„„ Optically-Isolated DFB Lasers Enable High
capable, yet conveniently flexible, signal transport system.
Dynamic Range Links
„„ Fits in Optiva Enclosures, Which Support
Daisy Chain™ Video, Audio and Data Links
„„ 16, 6, 2, & 1 Slot Enclosures Available
„„ CE & CSA Certified, ROHS
© 2012 EMCORE Corporation | REV 2012.12
626-293-3400
[email protected]
www.emcore.com
Information contained herein is deemed to be reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specifications at any time without notice.
OTS-1LD
DWDM Wideband Optical Link
DATASHEET | DECEMBER 2012
SATCOM
Performance Highlights
Parameter
Link
Min
Typical
Max
Units
Frequency Range
50 Ohm
75 Ohm
50
50
-
2500
2500
MHz
MHz
Link Gain @ 1 dB Optical Loss
0
30
-
dBo
Noise Figure (TG at Max, 2150 MHz, 1 dBo Loss)
-
10
15
dB
Input IP3 (TG Max, 2150 MHz, 1 dBo Loss)
-
-
2
dBm
Spur Free Dynamic Range (1 dBo Loss)
-
110
105
dB/Hz2/3
-10
-
50
˚C
-
0 to -35
-
dBm
TX Gain (TG) at max, 1 GHz2
0
8
-
dB (W/A)
TG Adjustment Range (reduction from max)
30
-
-
dB
Non DWDM Wavelengths
1280
1530
-
1340
1560
nm
DWDM Wavelengths (See Center Wavelength Table for
Specific Channel Center)
1534
-
1562
nm
8
15
18
13
-
dB
LNB Voltage
Current
16
-
17
-
19
350
V
mA
Optical Power
8
9
10
dBmo
DC Power
LNB Off
-
12
-
500
V
mA
-
-8 to -25
-
dBm
RX Gain (RG), at max, 1 GHz
20
22
-
dB (A/W)
RG Adjustment Range (reduction from max)
30
-
-
dB
Output IP3 (2150 MHz)
20
25
-
dBm
Output 1dB compression (2150 MHz)
-
15
-
dBm
Receiver Sensitivity
-
-20
-
dBmo
10
10
15
10
-
dB
-
12
-
250
V
mA
Air Temperature
TX
RF Input within SGC range1
Input Return Loss
50 - 200 MHz
950 - 2150 MHz
50 MHz - 3000 MHz
RX
Typical S21
RF Output (Tx at peak, 1 dBmo into Rx)
2
Output Return Loss
50 - 200 MHz
950 - 2150 MHz
50 MHz - 3000 MHz
DC Power
2.5 GHz
2 dB per division
.05 GHz
3.5 GHz
OTS-1LD (TX & RX)
5.06 in.
128 mm
3 RU
TX
RX
Enclosure Options
OT-CC-16F
1. Wider RF inputs are acceptable, but will set the RF amp gain to its limit.
2. Link RF GaindB = TG + RG – 2*FiberLossdBo (assumes Rin = Rout)
3. dBmo & dBo indicate optical power & loss to minimize confusion with RF dBm & dB
OT-CC-6
OT-DTCR-1
© 2012 EMCORE Corporation | REV 2012.12
626-293-3400
[email protected]
OT-DTCR-2
www.emcore.com
Information contained herein is deemed to be reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specifications at any time without notice.
OTS-1LD
DWDM Wideband Optical Link
DATASHEET | DECEMBER 2012
SATCOM
Center Wavelengths
Channel
nm
Channel
nm
Channel
nm
Channel
nm
Channel
nm
54
1534.25
46
1540.56
38
1546.92
30
1553.33
22
1559.79
53
1535.04
45
1541.35
37
1547.72
29
1554.13
21
1560.61
52
1535.82
44
1542.14
36
1548.51
28
1554.94
20
1561.42
51
1536.61
43
1542.94
35
1549.32
27
1555.75
19
1532.23
50
1537.40
42
1543.73
34
1550.12
26
1556.56
49
1538.19
41
1544.53
33
1550.92
25
1557.36
48
1538.98
40
1545.32
32
1551.72
24
1558.17
47
1539.77
39
1546.12
31
1552.52
23
1558.98
Ordering Information
Product Code
Specifications
OTS-1LDT/S5-XX09-SA-IC
Transmitter, 50-2500 MHz, SMA 50 ohm, DWDM Channel XX, 9dBm (min), SC/APC
OTS-1LDT/B5-XX09-SA-IC
Transmitter, 50-2500 MHz, BNC 50 ohm, DWDM Channel XX, 9dBm (min), SC/APC
OTS-1LDT/B7-XX09-SA-IC
Transmitter, 50-2500 MHz, BNC 75 ohm, DWDM Channel XX, 9dBm (min), SC/APC
OTS-1LDT/S5-1309-SA-IC
Transmitter, 20-2500 MHz, SMA 50 ohm, 1310 nm, 9dBm (min), SC/APC
OTS-1LDT/B5-1309-SA-IC
Transmitter, 50-2500 MHz, BNC 50 ohm, 1310 nm, 9 dBm (min), SC/APC
OTS-1LDT/B7-1309-SA-IC
Transmitter, 50-2500 MHz, BNC 75 ohm, 1310 nm, 9 dBm (min), SC/APC
OTS-1LDT/S5-1509-SA-IC
Transmitter, 50-7500 MHz, SMA 50 ohm, 1550 nm, 9 dBm (min), SC/APC
OTS-1LDT/B5-1509-SA-IC
Transmitter, 50-2500 MHz, BNC 50 ohm, 1550 nm, 9 dBm (min), SC/APC
OTS-1LDT/B7-1509-SA-IC
Transmitter, 50-2500 MHz, BNC 75 ohm, 1550 nm, 9 dBm (min), SC/APC
OTS-1LR/S5-SA-IC
Receiver, 50-3000 MHz, SMA 50 ohm, SC/APC
OTS-1LR/B5-SA-IC
Receiver, 50-3000 MHz, BNC 50 ohm, SC/APC
OTS-1LR/B7-SA-IC
Receiver, 50-2500 MHz, BNC 75 ohm, SC/APC
OPV-CTLR-IC
NMS SNMP Controller Card & MIB for Optiva Family
OTP-1ETR-A2/A2
Optical Tcvr, 1Ch, Ethernet, SM, Dual LC
OT-CC-16F-XXX
Chassis, Rack Mount, 16 Slot, 3RU -- See OT-CC-16F data sheet for exact models
PS-200-XX
Power Supply, 12 Vdc, 100 to 240 Vac, 50/60 Hz -- See PS-200F data sheet for exact models
OT-CC-6-1U
Chassis, Rack Mount, 6 Slot, 1RU -- See OT-CC-6 data sheet for exact models
OT-DTCR-1 / OT-DTCR-2
Chassis, flange-mount, w/ Power Supply, 1 slot / 2 slot
© 2012 EMCORE Corporation | REV 2012.12
626-293-3400
[email protected]
www.emcore.com
Information contained herein is deemed to be reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specifications at any time without notice.
OTS-1LD
DWDM Wideband Optical Link
DATASHEET | DECEMBER 2012
SATCOM
Laser Safety
This product meets the appropriate standard in Title 21 of the Code of Federal Regulations (CFR). FDA/CDRH Class 1M laser
product. This device has been classified with the FDA/CDRH under accession number 0220191. All Versions of this laser are Class
1M laser product, tested according to IEC 60825-1:2007 / EN 60825-1:2007
An additional warning for Class 1M laser products. For diverging beams, this warning shall state that viewing the laser output
with certain optical instruments (for example: eye loupes, magnifiers, and microscopes) within a distance of 100 mm may pose
an eye hazard. For collimated beams, this warning shall state that viewing the laser output with certain instruments designed
for use at a distance (for example: telescopes and binoculars) may pose an eye hazard.
Wavelength = 1.3/1.5 μm.
Maximum power = 30 mW.
*Caution - Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
*IEC is a registered trademark of the International Electrotechnical Commision.
© 2012 EMCORE Corporation | REV 2012.12
626-293-3400
[email protected]
www.emcore.com
Information contained herein is deemed to be reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specifications at any time without notice.
Similar pages