Emcore OTS-1LR/B5-SA-IC Cwdm wideband optical link Datasheet

OTS-1LC
CWDM Wideband Optical Link
DATASHEET | DECEMBER 2012
SATCOM
50 MHz to 3000 MHz CWDM Wideband Optical Link
Optiva Wideband fiber-optic links are optimized to perform
in the 50 to 3000 MHz frequency range providing transparent
signal transportation for satellite antenna applications. The
unique features of the OTS-1LC series include simple push
button peaking for optimum performance and our
patent-pending SmartGain™ Control, which ensures consistent
performance over varied signal conditions.
As with all EMCORE optical products, the highest quality components and
modern production techniques insure that intra-facility links provide the highest
Features
„„ 50 to 3000 MHz Optimized for IF, L and
S-Band Satellite Signals
„„ Supports 20 km Links
„„ 8-Channel CWDM
performance as a cost-effective alternative to coaxial cable. They provide much
longer transmission distances than copper cables, simplify network design, ease
installation and even enhance immunity from EMI, RFI and lightning. These
transmitters and receivers take the high RF performance and diverse features
of EMCORE’s Ortel technology and combine them into a compact package
compatible with the Optiva family of OT-CC and OT-DTCR enclosures.
„„ 30dB Adjustable Gain Range Provides Perfect Level Match for Signal Distribution
„„ Unique Peak Optimizer and SmartGain™
Control
System Design
Optiva is a completely modular hot-swappable platform. Both 19” rack mount
and compact tabletop or wall-mountable enclosures are available. The 19”
„„ 50 & 75 Ohm BNC or 50 Ohm SMA
„„ Tx & Rx RF Power Monitors Via LED, SMA &
Remote
rack-mount enclosure (Model OT-CC-16F-XXX) can support up to 16 insert
cards and provides a single power supply (Model PS-200), or a dual-redundant, hot-swappable power supply option. Compact enclosures are available with 1, 2 or 6 slots. The one slot (OT-DTCR-1) and two slot (OT-DTCR-2)
enclosures both use an external power supply (PS-9012) and optionally have
„„ LNB Power
„„ SNMP Monitoring and Control
„„ High-Dynamic-Range, Optically-Isolated DFB
Lasers Run Cooler and Require Less Power
„„ Fits in Optiva enclosures, which support Daisy
Chain™ Video, Audio and Data Links
a standard 2-pin DC power connector for more custom applications. Like the
OT-CC-16F the six-slot 1 RU enclosure (OT-CC-6) has hot swap redundant power supply. The Optiva family’s existing wide range of video, audio and data
transport products include a unique Daisy-Chain™ feature that multiplexes
multiple electrical inputs onto a single fiber, thus resulting in an extremely
capable, yet conveniently flexible, signal transport system.
„„ Hot Swap Redundant Power Supplies Virtually Eliminate Downtime
„„ 16, 6, 2, & 1 Slot Enclosures Available
„„ CE & CSA Certified, ROHS
© 2012 EMCORE Corporation | REV 2012.12
626-293-3400
[email protected]
www.emcore.com
Information contained herein is deemed to be reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specifications at any time without notice.
OTS-1LC
CWDM Wideband Optical Link
DATASHEET | DECEMBER 2012
SATCOM
Performance Highlights
Parameter
Link
Min
Typical
Max
Units
Frequency Range
50 Ohm
75 Ohm
50
50
-
3000
2500
MHz
MHz
Fiber Distance
0
-
20
Km
dBo
Optical Loss
0
-
8
-10
-
50
˚C
-
0 to -35
-
dBm
TX Gain (TG) at max, 1 GHz2
0
8
-
dB (W/A)
TG Adjustment Range (reduction from max)
30
-
-
dB
Noise Figure (TG at max, 2150 MHz, 1dBo loss)
Noise Figure (TG at min, 2150 MHz, 1dBo loss)
19
40
13
35
---
dB
Air Temperature
TX
Typical S21
1
RF Input within SGC range
Input IP3
-5
Spur Free Dynamic Range (1dBo loss)
100
103-108
-
dB/Hz²/³
Wavelengths (See center Wavelength table for specific
channel center)
1470
-
1610
nm
-
10
12
10
-
dB
LNB Voltage
Current
16
-
17
-
19
350
V
mA
Optical Power
3
4
5
dBmo
DC Power
LNB Off
-
12
-
350
V
mA
Input Return Loss
50 - 200 MHz
950 - 2150 MHz
50 MHz - 3000 MHz
RX
dBm
-
-8 to -25
-
dBm
RX Gain (RG), at max, 1 GHz2
RF Output (Tx at peak, 1 dBmo into Rx)
20
22
-
dB (A/W)
RG Adjustment Range (reduction from max)
30
-
-
dB
Output IP3 (2150 MHz)
20
25
-
dBm
Output 1dB compression (2150 MHz)
-
15
-
dBm
Receiver Sensitivity
-
-20
-
dBmo
10
15
-
dB
-12
-6
-
10
10
dBmo
dBmo
Output Return Loss
50 - 200 MHz
950 - 2150 MHz
50 MHz - 3000 MHz
Optical Input
Optimal
3.0 GHz
2 dB per division
.05 GHz
3.5 GHz
OTS-1L (TX & RX)
5.06 in.
128 mm
3 RU
TX
RX
Enclosure Options
OT-CC-16F
1. Wider RF inputs are acceptable, but will set the RF amp gain to its limit.
2. Link RF GaindB = TG + RG – 2*FiberLossdBo (assumes Rin = Rout)
3. dBmo & dBo indicate optical power & loss to minimize confusion with RF dBm & dB
OT-CC-6
OT-DTCR-1
© 2012 EMCORE Corporation | REV 2012.12
626-293-3400
[email protected]
OT-DTCR-2
www.emcore.com
Information contained herein is deemed to be reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specifications at any time without notice.
OTS-1LC
CWDM Wideband Optical Link
DATASHEET | DECEMBER 2012
SATCOM
Center Wavelengths
Channel
nm
47
1470
49
1490
51
1510
53
1530 - Wavelength compatible with DWDM and can be passed thru an EDFA
55
1550 - Wavelength compatible with DWDM and can be passed thru an EDFA
57
1570
59
1590
61
1610
Ordering Information
Product Code
Specifications
OTS-1LCT/S5-XX03-SA-IC
Transmitter, 50-3000 MHz, SMA 50 ohm, CWDM Channel XX, 3dBm (min), SC/APC
OTS-1LCT/B5-XX03-SA-IC
Transmitter, 50-3000 MHz, BNC 50 ohm, CWDM Channel XX, 3dBm (min), SC/APC
OTS-1LCT/B7-XX03-SA-IC
Transmitter, 50-2500 MHz, BNC 75 ohm, CWDM Channel XX, 3dBm (min), SC/APC
OTS-1LR/S5-SA-IC
Receiver, 50-3000 MHz, SMA 50 ohm, SC/APC
OTS-1LR/B5-SA-IC
Receiver, 50-3000 MHz, BNC 50 ohm, SC/APC
OTS-1LR/B7-SA-IC
Receiver, 50-2500 MHz, BNC 75 ohm, SC/APC
OPV-CTLR-IC
NMS SNMP Controller Card & MIB for Optiva Family
OTP-1ETR-A2/A2
Optical Tcvr, 1Ch, Ethernet, SM, Dual LC
OT-CC-16F-XXX
Chassis, Rack Mount, 16 Slot, 3RU -- See OT-CC-16F data sheet for exact models
PS-200-XX
Power Supply, 12 Vdc, 100 to 240 Vac, 50/60 Hz -- See PS-200F data sheet for exact models
OT-CC-6-1U
Chassis, Rack Mount, 6 Slot, 1RU -- See OT-CC-6 data sheet for exact models
OT-DTCR-1 / OT-DTCR-2
Chassis, flange-mount, w/ Power Supply, 1 slot / 2 slot
© 2012 EMCORE Corporation | REV 2012.12
626-293-3400
[email protected]
www.emcore.com
Information contained herein is deemed to be reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specifications at any time without notice.
OTS-1LC
CWDM Wideband Optical Link
DATASHEET | DECEMBER 2012
SATCOM
Laser Safety
This product meets the appropriate standard in Title 21 of the Code of Federal Regulations (CFR). FDA/CDRH Class 1M laser
product. This device has been classified with the FDA/CDRH under accession number 0220191. All Versions of this laser are
Class 1M laser product, tested according to IEC 60825-1:2007 / EN 60825-1:2007
An additional warning for Class 1M laser products. For diverging beams, this warning shall state that viewing the laser output
with certain optical instruments (for example: eye loupes, magnifiers, and microscopes) within a distance of 100 mm may pose
an eye hazard. For collimated beams, this warning shall state that viewing the laser output with certain instruments designed
for use at a distance (for example: telescopes and binoculars) may pose an eye hazard.
Wavelength = 1.3/1.5 μm.
Maximum power = 30 mW.
*Caution - Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
*IEC is a registered trademark of the International Electrotechnical Commision.
© 2012 EMCORE Corporation | REV 2012.12
626-293-3400
[email protected]
www.emcore.com
Information contained herein is deemed to be reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specifications at any time without notice.
Similar pages