OPTEK OVLGO0C7B9 High-intensity orange led in plastic t-1â¾ package Datasheet

High-Intensity Orange LED in Plastic
T-1¾ Package
OVLGO0CxB9
x
x
x
x
Narrow Beam Angle
High Luminous Intensity
Water Clear Plastic Package
Orange (615nm)
Product Photo Here
The OVLGO0CxB9 is a high intensity AlInGaP LED mounted in a clear plastic T-1¾ package. The device incorporates an integral molded lens that enables a narrow beam angle and provides an even emission pattern. Designed
to produce light over a wide range of drive currents, this LED is useful in applications requiring higher on-axis
brightness than that achievable with standard lamps.
Applications
x Indoor/Outdoor Applications
x Message Boards
x Store Front Signage
x Indicators
Part Number
OVLGO0C6B9
OVLGO0C7B9
OVLGO0C8B9
Material
AlInGaP
Emitted Color
Intensity Typ. mcd
Lens Color
Orange
10000
12500
16000
Water Clear
RoHS
1 ANODE
2 CATHODE
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue 1.0
0505
Page 1
T-1¾ High-Intensity Orange LED
OVLGO0CxB9
Absolute Maximum Ratings
TA = 25oC unless otherwise noted
Storage Temperature Range
-40 ~ +100 °C
Operating Temperature Range
-40 ~ +85 °C
Reverse Voltage
5V
Continuous Forward Current
2
50 mA
Peak Forward Current (10% Duty Cycle, 1KHz)
100 mA
Power Dissipation
120 mW
Lead Soldering Temperature (3mm from the base of the epoxy bulb)
1
260 °C
Electrostatic Discharge
2000 V
Note:
1. Solder time less than 5 seconds at temperature extreme.
Electrical Characteristics
TA = 25oC unless otherwise noted
SYMBOL
Iv
PARAMETER
Luminous Intensity
MIN
TYP
MAX
x=6
6300
10000
----
7
8000
12500
----
8
10000
16000
----
UNITS
CONDITIONS
mcd
IF = 20mA
VF
Forward Voltage
----
2.0
2.4
V
IF = 20mA
IR
Reverse Current
----
----
10
µA
VR = 5V
P
Peak Wavelength
----
621
----
nm
IF = 20mA
D
Dominant Wavelength
----
615
----
nm
IF = 20mA
50% Power Angle
----
6
----
deg
IF = 20mA
2 ½H-H
Issue 1.0
Page 2
0505
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com
T-1¾ High-Intensity Orange LED
OVLGO0CxB9
Typical Electro-Optical Characteristics Curves
Half Power
mA
WL = 18nm
%
V
mA
Forward Current vs. Forward Voltage
Relative Luminous Intensity vs. Wavelength
%
%
°C
mA
Relative Luminous Intensity vs. Ambient
Temperature
Relative Luminous Intensity vs. Forward Current
mA
%
°C
Forward Current vs. Ambient Temperature
Relative Intensity vs. Radiation Angle
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue 1.0
0505
Page 3
T-1¾ High-Intensity Orange LED
OVLGO0CxB9
Issue
1.0
Issue 1.0
Page 4
0505
Change Description
Initial Release
Approval
Date
J. Haynie
6/7/05
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com
Similar pages