Microsemi OX-220 Oven controlled crystal oscillator Datasheet

OX-220
Oven Controlled Crystal Oscillator
OX-220
Features
•
•
•
•
•
Applications
Reflow Process Compatible
Surface Mount package
SC_CUT Crystal
Low Profile Compact Package (8.3mm)
Standard Frequencies: 10; 12.8; 19.2; 20; 26; 30.72 Mhz
•
•
•
•
•
Base stations
Test equipment
Synthesizers
Military communication equipment
Digital Switching
Performance Specifications
Frequency Stabilities1 (SC-Cut Crystal-Option - 10 to 40 MHz)
Parameter
Min
Max
Units
Condition
vs. operating temperature range
(referenced to +25°C)
-10
-10
Typical
+10
+10
ppb
ppb
-20 to +70°C
-40 to +85°C
Initial tolerance
vs. supply voltage change
vs. load change
vs. aging / day
vs. aging / day
vs. aging / year
vs. aging / year
-0.2
-5
-5
-0.5
-1
-60
-100
+0.2
+5
+5
+0.5
+1
+60
+100
ppm
ppb
ppb
ppb
ppb
ppb
ppb
at time of shipment, nominal EFC
VS ±5% static
Load ±5% static
≤10 Mhz after 30 days of operation
> 10 Mhz after 30 days of operation
≤ 10 Mhz after 30 days of operation
> 10 Mhz after 30 days of operation
5
minutes
to ±100ppb of final frequency (1 hour
reading) @ +25°C
Holdover
start up time
Warm-up time
Page 1 of 8
Vectron International • 267 Lowell Road, Hudson Suite 102, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Performance Specifications
Supply Voltage (Vs)
Parameter
Supply voltage (standard)
Min
Typical
Max
Units
3.135
3.3
3.465
VDC
4.75
5.0
5.25
VDC
3.1
Watts
during warm-up
1.5
Watts
steady state @ +25°C
Power consumption
Condition
RF Output
Signal [standard]
HCMOS
Load
15
pF
Signal Level (Vol)
0.4
Signal Level (Vol)
VDC
0.5
Signal Level (Voh)
2.4
Signal Level (Voh)
3.5
Duty Cycle
45
with Vs=3.3V and 15pF Load
with Vs=5.0V & 12V and 15pF Load
VDC
with Vs=3.3V and 15pF Load
with Vs=5.0V & 12V and 15pF Load
55
%
Rise time
5
ns
Fall time
5
ns
Signal
@ (Voh-Vol)/2
Sine Wave
Load
50
Ω
Output Power @3,3V
2
5
8
dBm
50 Ω load
Output Power @ 5.0V
5
8
11
dBm
50 Ω load
-30
dBm
50 Ω load
Harmonics
Tuning Range
Fixed OCXO; No adjust
±0.8
±2.4
Linearity
ppm
with SC cut crystal
Option5
Frequency Tuning (EFC)
10%
Tuning Slope
Positive
Control Voltage Range
0.0
1.4
2.8
VDC
with Vs=3.3V
0.0
2.0
4.0
VDC
with Vs=5.0V
modulation
Reference Voltage Output (Vref )
Reference Voltage
2.75
2.8
2.85
VDC
with Vs = 3.3 VDC
3.92
4.0
4.08
VDC
with Vs = 5.0 VDC
Additional Parameters
3
Phase Noise
-80
-110
-138
-148
-152
-70
-105
-130
-140
-145
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
1 Hz
10 Hz
100 Hz
1 kHz
10 kHz
@
30.72MHz
with SC
Cut
Phase Noise3
-90
-120
-140
-148
-152
-80
-110
-135
-145
-145
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
1 Hz
10 Hz
100 Hz
1 kHz
10 kHz
@ 20MHz
with SC
Cut
10
g
Weight
Processing & Packing
Handling & Processing Note
Page 2 of 8
Vectron International • 267 Lowell Road, Hudson Suite 102, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Absolute Maximum Ratings
supply voltage (Vs)
5.5
V
Output Load
50
pF
Operable Temperature Range
-45
+85
°C
Storage Temperature Range
-45
+85
°C
with Vs=3.3 & 5.0 VDC
Outline Drawing / Enclosure
OX-220
Height “H”
cover material
12.1
plastic
8.5
plastic
Pin Connections
1
Electronic Frequency Control Input (EFC)
2
Reference Voltage output
3
Supply Voltage Input (Vs)
4
RF Output
5
Oven Alarm
6
N.C or Option (must remain un connected)
7
Ground (Case)
Dimensions in mm
Page 3 of 8
Vectron International • 267 Lowell Road, Hudson Suite 102, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Standard Shipping Method (OX-220 / OX -221)
Lage im Gurt
Position in tape
Pin1
K
4.0
A
1.75±0.1
W
B
XXXXX
XXXXX
Abwickelrichtung
Unwinding direction
B
R0
.75
A
P
A
±0.05
0.20
Schnitt A - A
B
Bei W < 32mm nur obere Lochreihe vorhanden
if W < 32mm only upper hole line existent
Schnitt B - B
Maßangaben in mm:
Dimension in mm:
A, B und K Maße von Bauelement abhängig
A, B und K are dependent uppon component dimensions
Fertigungstoleranzen entsprechen der DIN IEC 286-3
production tolerance complying DIN IEC 286-3
All dimensions in millimeters unless otherwise stated
Enclosure Type
Tape Width W (mm)
Quantity per meter
Quantity per reel
Dimension P
OX-2201 (12.1mm)
44
37.5
175
28
OX-2206 (8.5mm)
44
37.5
250
28
Recommended Reflow Profile
IPC/JEDEC J-STD-020 (latest revision)
Additional Information:
This SMD oscillator has been designed for pick and place reflow soldering.
SMD oscillators must be on the top side of the PCB during the reflow process.
Additional Environmental Conditions
Parameter
Description
Rapid temperature
changes
MIL-883-1010 Cond B 1000 cycles -55/125C
Vibration
MIL-STD-883 Meth 2007 Cond A 20G 20-2000Hz 4x in each 3axis 4 min
Shock
Mech.Shock MIL-STD-202 Meth 213 Cond.C 100G 6ms 6 shocks in each direction
Solderability
J_STD_002C Cond A, Through hole device/ Cond. B, SMD 255C (diving time
50,5sec.) Dip+Look with 8h damp pre-treatment: solder wetting >95%
Solvent resistance
MIL-STD-883 Meth 2015 Solv. 1,3,4
ESD
HBM JESD22-A114-F Class 1C 10* 1000V
Moisture Sensit.
Level 1 JESD22-A113-B
RoHS compliance
100% RoHS 6 compliant
Washable
non-washable device
Note: All temperatures refer to topside of the package, measured on the package body surface.
Page 4 of 8
Vectron International • 267 Lowell Road, Hudson Suite 102, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
typical performance data
typical warm up
typical temp stability
@ OX-2201-EAE-1080-20M00
@ OX-2201-EAE-1080-20M00
80
10
8
60
6
Frequency deviation [ppb]
Frequency deviation [ppb]
40
20
0
-20
4
2
0
-2
-4
-40
-6
-60
-8
-80
0
200
400
600
800
Time [sec]
1000
1200
-10
-60
-40
-20
0
20
40
Temperature [°C]
typical Phase Noise
typical ADEV
@ OX-2201-EAE-1080-20M00
@ OX-2201-EAE-1080-20M00
Page 5 of 8
Vectron International • 267 Lowell Road, Hudson Suite 102, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
60
80
100
typical performance data
typical aging data
typical frequeny vs. supply voltage
@ OX-2201-EAE-1080-20M00
@ OX-2201-EAE-1080-20M00
typical frequency vs. load change
typical retrace
@ OX-2201-EAE-1080-20M00
@ OX-2201-EAE-1080-20M00
Page 6 of 8
Vectron International • 267 Lowell Road, Hudson Suite 102, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
typical performance data
typical case temperature vs outside temperature
typical power consumption vs operating temperauture
@ OX-2201-EAE-1080-20M00
@ OX-2201-EAE-1080-20M00
recomended power on time after x days of power off
@ OX-2201-EAE-1080-20M00
Page 7 of 8
Vectron International • 267 Lowell Road, Hudson Suite 102, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Ordering Information
OX - 220 1 - D A E - 108 0 - 10M0000000
Product Family
OX: OCXO
Frequency
Package
SMD version: 220
Frequency Control
0: No Tuning
1: ±0.8 to ±2.4ppm
Height
1: 12.1 mm
6: 8.5 mm
Stability Code
108: ±10ppb
Supply Voltage
D: 5V
E: 3.3V
RF Output Code
A: HCMOS
E: Sinewave
Temperature Range
E: -40°C to +85°C
J: -20°C to +70°C
Notes:
1. Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies.
2. Unless other stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25°C).
3. Phase noise degrades with increasing output frequency.
4. Subject to technical modification.
5. Contact factory for availability.
For Additional Information, Please Contact
USA:
Vectron International
267 Lowell Road
Suite 102
Hudson, NH 03051
Tel: 1.888.328.7661
Fax: 1.888.329.8328
Europe:
Vectron International
Landstrasse, D-74924
Neckarbischofsheim, Germany
Tel: +49 (0) 7268.801.100
Fax: +49 (0) 7268.801.282
Asia:
Vectron International
68 Yin Cheng Road(C), 22nd Floor
One LuJiaZui
Pudong, Shanghai 200120, China
Tel: +86 21 6194 6886
Fax: +86 21 6194 6699
Disclaimer
Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application.
No rights under any patent accompany the sale of any such product(s) or information.
Rev: 16.01.2015
Page 8 of 8
Vectron International • 267 Lowell Road, Hudson Suite 102, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Similar pages