S E R I E S P197 SWITCHES POWER PUSHBUTTON SERIES SPECIFICATIONS Rating: 10A @ 125 VAC - UL, CUL 5A @ 250 VAC - UL, CUL, VDE TV-5 @ 125 VAC - UL, CUL In Rush, 80A @ 250 VAC - VDE 10,000 cycles 100mΩ max. typical; initial @ 2-4 VDC > 1,500 volts 1 minute > 3,000 volts between poles 300 ±100 gram force Electrical Life: Contact Resistance: Dielectric Strength: Operating Force: MATERIALS Housing: Actuator: Bracket: Contacts: Terminals: 6/6 Nylon Acetal Tin plated steel Silver plated copper alloy Silver plated copper alloy HOW TO ORDER Mechanical Configuration Series Termination Bracket Type Cap Cap Color EE=Latching S=Solder Lug P=PC Pin OA= Momentary A=2-Ø3.2 Non-Threaded Panel Mount See Cap Options P B=2-M3.0 x 0.5 Threaded Panel Mt. C=12.2mm PC Mt. D=8mm PC Mt. NOTE: Also available in 2 pole version. Contact E - Switch for more information. EXAMPLE P197 P EE TA12 B BLU SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. P197 TERMINATION OPTIONS P S 72 Phone: 763-504-3525 Fax: 763-531-8235 www.e-switch.com [email protected] S E R I E S P197 S W I T C H E S POWER PUSHBUTTON SWITCHES BRACKET OPTIONS P.C. MOUNTING A/B Schematic 1 A = 2 - Ø3.2 (Non-Threaded) B = 2 - M3.0 x 0.5P (Threaded) 2 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. P.C. MOUNTING C Schematic C = 12.2 mm P.C. Pin Spacing (measured from terminal 2 to terminal 1) 2 1 P.C. MOUNTING D Schematic D = 8 mm P.C. Pin Spacing (measured from terminal 2 to terminal 1) 2 1 Phone: 763-504-3525 Fax: 763-531-8235 www.e-switch.com [email protected] 73