UTC-IC 2SC4242L-TA3-T

UNISONIC TECHNOLOGIES CO., LTD
2SC4242
NPN SILICON TRANSISTOR
SWITCHMODE SERIES NPN
POWER TRANSISTORS
„
DESCRIPTION
The UTC 2SC4242 is a high-voltage, high-speed switching
power transistor and designed particularly for 115 and 220V
switch mode applications, such as switching regulators,
inverters, DC-DC converter and general purpose power
amplifiers.
„
FEATURES
* Low saturation voltage.
* Switching time: tF=0.5μs (Max.)@ IC=5.0A
* High reliability
„
*Pb-free plating product number: 2SC4242L
ORDERING INFORMATION
Ordering Number
Normal
Lead Free Plating
2SC4242-TA3-T
2SC4242L-TA3-T
Package
TO-220
Pin Assignment
1
2
3
B
C
E
Packing
Tube
2SC4242L-TA3-T
(1)Packing Type
(1) T: Tube
(2)Package Type
(2) TA3: TO-220
(3)Lead Plating
(3) L: Lead Free Plating, Blank: Pb/Sn
www.unisonic.com.tw
Copyright © 2008 Unisonic Technologies Co., Ltd
1 of 4
QW-R203-033.A
2SC4242
„
NPN SILICON TRANSISTOR
ABSOLUTE MAXIMUM RATINGS
PARAMETER
Collector-Emitter Voltage
Collector-Base Voltage
Emitter-Base Voltage
RATINGS
UNIT
400
V
450
V
8.0
V
Continuous
7.0
A
Collector Current
14
Peak
Base Current
2.0
A
Total Power Dissipation @TC=25℃
40
W
PD
Derate Above 25℃
0.32
W/°C
Junction Temperature
TJ
+150
°C
Storage Temperature
TSTG
-40 ~ +150
°C
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
„
THERMAL DATA
PARAMETER
Thermal Resistance Junction -Case
„
SYMBOL
VCEO
VCBO
VEBO
IC
ICM
IB
SYMBOL
θJC
RATINGS
4
UNIT
°C/W
ELECTRICAL CHARACTERISTICS (TC=25°C, unless otherwise specified)
PARAMETER
SYMBOL
TEST CONDITIONS
OFF CHARACTERISTICS
Collector-Emitter Sustaining Voltage
BVCEO ICEO=100mA, IB=0
Collector-Base Breakdown Voltage
BVCBO ICBO=1.0mA, IE=0
Emitter-Base Breakdown Voltage
BVEBO IEBO=1.0mA, IC=0
Collector Cutoff Current
ICBO
VCBO=450V, IE=0
Emitter Cutoff Current
IEBO
VEBO=8.0V, IC=0
ON CHARACTERISTICS
DC Current Gain
hFE
IC=4.0A, VCE=5.0V
Collector-Emitter Saturation Voltage
VCE (SAT) IC=4.0A, IB=800mA
Base-Emitter Saturation Voltage
VBE (SAT) IC=4.0A, IB=800mA
SWITCHING CHARACTERISTICS
On Time
tON
VCC=150V, IC=5.0A
Storage Time
tS
IB1= -IB2=1.0A, RL=30Ω
Fall Time
tF
Note: Pulse Test: Pulse Width=300µs, Duty Cycle ≤ 2.0%
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
MIN
TYP
MAX
UNIT
100
100
V
V
V
µA
µA
0.8
1.2
V
V
1.0
2.5
0.5
µs
µs
µs
400
450
8.0
10
2 of 4
QW-R203-033.A
2SC4242
„
NPN SILICON TRANSISTOR
TYPICAL CHARACTERISTIC
Power Derating
60
50
0
10
s
40
30
20
10
0
0
25
50
75
100
125
150
Time, t (μs)
Voltage, V (V)
DC Current Gain, hFE
Collector Emitter Voltage, VCE (V)
Temperature, TC (℃)
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 4
QW-R203-033.A
2SC4242
NPN SILICON TRANSISTOR
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
4 of 4
QW-R203-033.A