AZDISPLAYS PD035OX4

P-511-295(V:2)
PD035OX4
Version: 2.0
TECHNICAL SPECIFICATION
MODEL NO : PD035OX4
Customer’s Confirmation
Customer
Date
By
PVI’s Confirmation
FOR MORE INFORMATION:
AZ DISPLAYS, INC.
75 COLUMBIA, ALISO VIEJO, CA, 92656
Http://www.AZDISPLAYS.com
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.
PAGE:1
P-511-295(V:2)
PD035OX4
TECHNICAL
SPECIFICATION
CONTENTS
NO.
ITEM
PAGE
-
Cover
1
-
Contents
2
1
Application
3
2
Features
3
3
Mechanical Specifications
3
4
Mechanical Drawing of TFT-LCD module
4
5
Input / Output Terminals
5
6
Absolute Maximum Ratings
8
7
Electrical Characteristics
9
8
Pixel Arrangement
15
9
Display Color and Gray Scale Reference
16
10
Block Diagram
17
11
SPI Register Description and Timing Characteristics
18
12
Power On Sequence
22
13
Optical Characteristics
22
14
Handling Cautions
25
15
Reliability Test
26
16
Packing
27
-
Revision History
29
-
Appendix
30
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.
PAGE:2
P-511-295(V:2)
PD035OX4
1. Application
This technical specification applies to 3.5” color TFT-LCD panel PD035OX4.
The TFT LCD panel applies to videophone, door phone and other electronic products which
require high quality flat panel displays.
2. Features
. Amorphous silicon TFT-LCD panel with LED Backlight unit
. Support digital 8-bits serial / 24-bits parallel RGB and CCIR601/656 input mode.
. Optimum viewing direction6 o’clock.
. Provide source and gate drivers control timing.
. Image Reversion : Up/Down and Left/Right
. Wide View
3. Mechanical Specifications
Parameter
Screen Size
Display Format
Specifications
3.5 (diagonal)
320(RGB) x 234
Unit
inch
dot
Display colors
Active Area
262,144
71.6 (H)52.65 (V)
mm
Pixel Pitch
Pixel Configuration
Outline Dimension
Surface Treatment
0.22375 (H)0.225 (V)
Delta
84.03 (W)65.24 (H)3.43 (D)
Anti – Glare+WV-film
mm
Back-light
Weight
LED
425
Display model
Normally white
mm
g
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.
PAGE:3
P-511-295(V:2)
PD035OX4
NO BENDING AREA
4. Mechanical Drawing of TFT-LCD Module
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.
PAGE:4
P-511-295(V:2)
PD035OX4
5. Input / Output Terminals
CN1
FPC Down Connect , 30Pins , Pitch : 0.5 mm
Pin No
Symbol
I/O
Description
1
D15(G5)
I
Green Data
2
D14(G4)
I
Green Data
3
D13(G3)
I
Green Data
4
D12(G2)
I
Green Data
5
D11(G1)
I
Green Data
6
D10(G0)
I
Green Data(LSB)
7
VDD2
I
Analog power supply for source driver
8
V8
I
Gamma correction voltage 8
9
V7
I
Gamma correction voltage 7
10
V6
I
Gamma correction voltage 6
11
V5
I
Gamma correction voltage 5
12
V4
I
Gamma correction voltage 4
13
V3
I
Gamma correction voltage 3
14
V2
I
Gamma correction voltage 2
15
V1
I
Gamma correction voltage 1
16
VSS2
I
Analog ground for source driver
17
D07(R7)
I
Red Data(MSB)
18
D06(R6)
I
Red Data
19
D05(R5)
I
Red Data
20
D04(R4)
I
Red Data
21
D03(R3)
I
Red Data
22
D02(R2)
I
Red Data
23
D01(R1)
I
Red Data
24
D00(R0)
I
Red Data(LSB)
25
CLK
I
Clock signal. Latching data at the rising edge
26
HS
I
Horizontal sync input in RGB mode and CCIR601
Note 5-4
27
VS
I
Vertical sync input in RGB mode and CCIR601
Note 5-5
28
DEN
I
Input data enable control.(Normally pull low)
Note 5-6
29
VCC
I
Digital power supply for source driver IC
Note 5-7
30
VCOM
I
Voltage for common electrode
Note 5-8
Remark
Note 5-1
Note 5-2
Note 5-3
Note 5-1
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.
PAGE:5
P-511-295(V:2)
PD035OX4
CN2
FPC Down Connect , 30Pins , Pitch : 0.5 mm
Pin No
Symbol
I/O
Description
Remark
1
VLED
I
Power supply for LED
Note 5-9
2
GLED1
I
Ground for LED
3
GLED2
I
Ground for LED
4
NC
-
NC
5
VGH
I
Positive power for gate driver
Note 5-10
6
VDD1
I
Power supply for gate logic circuit
Note 5-11
7
VSS1
I
Ground for gate driver
8
VEE
I
Negative power for gate driver
Note 5-12
9
VDD1
I
Power supply for gate logic circuit
Note 5-11
10
GND
I
Digital ground for source driver IC
11
RESETB
I
Hardware global reset, (low active)
12
VSET
I
Externally/Internally gamma voltage setup
13
U/D
I
Up/Down control for gate driver
14
L/R
I
Left/Right control for source driver
15
IF2
I
Select the input data format
16
IF1
I
(Serial RGB, Parallel RGB, CCIR601/656)
17
SPENA
I
Serial port data enable signal (normally pull high)
`18
SPCK
I
Serial port clock. (Normally pull high)
19
SPDA
I/O
Serial port data input/output
20
POL
O
21
D27(B7)
I
Blue Data(MSB)
22
D26(B6)
I
Blue Data
23
D25(B5)
I
Blue Data
24
D24(B4)
I
Blue Data
25
D23(B3)
I
Blue Data
26
D22(B2)
I
Blue Data
27
D21(B1)
I
Blue Data
28
D20(B0)
I
Blue Data(LSB)
29
D17(G7)
I
Green Data(MSB)
30
D16(G6)
I
Green Data
Note 5-13
Note 5-14
Polarity select for the line inversion control signal Note 5-15
Note 5-1
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.
PAGE:6
P-511-295(V:2)
PD035OX4
Note 5-1 : Digital data input. DX0 is LSB and DX7 is MSB.
If parallel RGB input mode is used, D0X, D1X, and D2X indicate R, G and B data in turn.
If serial RGB or CCIR601/656 input mode is selected, only D07~D00 are used, and others
short to Vss.
Note 5-2 : VDD2 Typ. = +5V
Note 5-3 : The output voltage is determined by the digital input data. If digital RGB or CCIR601/656
input mode is selected, The 8 gamma correction reference voltages can be set to
externally or generate internally.
If VSET = ”H”, the gamma correction voltage generated externally
If VSET = “L”, the default value is as below : (When VDD =+5V)
Default
Voltage(V)
V1
4.29
V2
3.73
V3
3.33
V4
2.94
V5
2.62
V6
2.22
V7
1.51
V8
0.48
Note 5-4 : Horizontal sync input in digital RGB mode. Or HREF input in CCIR601 mode.
( Short to Vss if not used )
Note 5-5 : Vertical sync input in digital RGB mode. Or V123 input in CCIR601 mode.
( Short to Vss if not used )
Note 5-6 : Digital RGB data input format
For digital RGB input data format, both SYNC. Mode and DEN mode are supported. If
DEN signal is fixed low, SYNC. Mode is used. Otherwise , DEN mode is used.
Note 5-7 : VCC Typ. = +3.3V
Note 5-8 : VCOM Typ.+6.0Vpp
Note 5-9 : ILED Typ. = 20mA., VLED Typ. = 9V
Note 5-10 : VGH Typ. =+15V.
Note 5-11 : VDD1 Typ.+3.3V.
Note 5-12 : VEE Typ. = -15V.
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.
PAGE:7
P-511-295(V:2)
PD035OX4
Note 5-13 : The definition of L/R , U/D
Note 5-14 : IF1,IF2 control the input data format.
IF2,IF1
Input data format
L,L (default)
Serial RGB
L,H
Parallel RGB
H,L
CCIR601
H,H
CCIR656
Note 5-15 : When POL=L, output voltage is negative polarity.
When POL=H, output voltage is positive polarity.
6.Absolute Maximum Ratings
Parameter
Supply voltage for source driver
Supply voltage for gate driver
Input signal voltage
Symbol
VCC
MIN.
-0.3
VSS1=VSS2=0 VTa = 25 MAX.
Unit Remark
+7.0
V
VDD2
-0.3
+7.0
V
VDD1
-0.3
+7.0
V
H Level VGH
-0.3
+32.0
V
L Level VEE
-22.0
+0.3
V
VGH-VEE
-0.3
+45.0
V
VIN
-0.3
VDD+0.3
V
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.
PAGE:8
P-511-295(V:2)
PD035OX4
7. Electrical Characteristics
7-1 Operating condition
Parameter
Supply voltage for source driver
Supply voltage for gate driver
Signal input voltage
Signal output voltage
Logic
Analog
Logic
H level
L level
H level
L level
H level
L level
VSS1=VSS2=0 VTa = 25 MAX. Unit
Remark
+3.6
V
+5.5
V
+3.6
V
+30
V
-5
V
VCC
V
0.3VCC V
VCC
V
0.2VCC V
Symbol MIN.
VCC
+3.0
VDD2
+3.8
VDD1
+3.0
VGH
+10
VEE
-17
VIH
0.7VCC
VIL
0
VoH
0.8VCC
VoL
0
Typ.
+3.3
+5.0
+3.3
+15
-15
-
VCOMAC
-
+6.0
-
VP-P
VCOMDC
-
1.0
-
V
VCOM
AC Component
of VCOM
DC Component
of VCOM Note 7-1
Note 7-1 : PVI strongly suggests that the VCOMDC level shall be adjustable , and the adjustable level
range is 1V1V , every module’s VCOMDC level shall be carefully adjusted to show a best
image performance.
7-2 Recommended driving condition for LED backlight
Parameter
Supply voltage of LED backlight
Supply current of LED backlight
Symbol
VLED
ILED
Min
9.0
-
TYP
10.0
20
MAX
11.0
-
Unit
V
mA
Remark
IL = 20 mA
Note 7-2
Backlight Power Consumption
PLED
360
400
440
mW
Note 7-3
Note 7-2 : LED B/L applied information , please refer to the appendix at the end .
Note 7-3 : PLED = 2*ILED*VLED .
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.
PAGE:9
P-511-295(V:2)
PD035OX4
7-3 Power consumption
VSS1=VSS2=0 VTa = 25 Symb
Conditions TYP. MAX. Unit
ol
Supply current for gate driver (Hi level)
IGH VGH +15V 0.2
mA
0.5
VDD1
IDD1
Supply current for gate driver(Logic)
mA
0.05 0.1
+3.3V
Supply current for gate driver (Low
mA
IEE
VEE -15V 0.2
0.5
level)
Supply
current
for
source
mA
VDD2 VDD2+5V 5.0
8.0
driver(Analog)
Supply current for source driver(Logic)
VCC VCC+3.3V 4.5
mA
7.0
LCD panel power consumption
mW
48
80
Backlight power consumption
PLED
400 440 mW
Parameter
Total power consumption
Above data measured on serial mode:
-
0.45
0.52
Remark
VEE center
voltage
W
If on parallel mode, ICC Typ.= 3.0mA, Max.=5.0mA ;
panel power consumption Typ.= 41.5mW
Max.= 72.8mW.
If on CCIR601/656 mode, ICC Typ.= 6.0mA, Max.=10.0mA ;
panel power consumption Typ.= 51.4mW
Max.= 89.3mW.
7-4 Timing characteristics of input signals
7.4.1 Serial 8 bits RGB interface
Characteristics
Symbol
CLK period
TOSC
Data setup time
TSU
Data hold time
THD
HS period
TH
HS pulse width
THS
HS rising time
TCr
HS falling time
TCf
VS pulse width
TVS
VS rising time
TVr
VS falling time
TVf
HS falling to VS falling time for
THVO
odd field
VS falling to HS falling time for
THVE
even field
VS-DEN time
TVSE
Min.
12
12
5
1
-
Typ.
52
1224
90
3
-
Max.
700
300
5
700
1.5
Unit
ns
ns
ns
TOSC
TOSC
ns
ns
TH
ns
us
0
3
-
TOSC
0
3
-
TOSC
-
18
-
TH
Remark
Note 7-4
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.
PAGE:10
P-511-295(V:2)
HS-DEN time
DEN pulse width
THE
TEP
VS period
108
-
204
960
264
-
TOSC
TOSC
-
262
-
TH
st
PD035OX4
th
Note 7-4 : When SYNC mode is used, 1 data start from 204 CLK after HS fallings.
7.4.2 Parallel 24 bits RGB interface
Characteristics
Symbol
CLK period
TOSC
Data setup time
TSU
Data hold time
THD
HS period
TH
HS pulse width
THS
HS rising time
TCr
HS falling time
TCf
VS pulse width
TVS
VS rising time
TVr
VS falling time
TVf
HS falling to VS falling time for
THVO
odd field
VS falling to HS falling time for
THVE
even field
Min.
12
12
5
1
-
Typ.
156
408
30
3
-
Max.
700
300
5
700
1.5
Unit
ns
ns
ns
TOSC
TOSC
ns
ns
TH
ns
us
0
3
-
TOSC
0
3
-
TOSC
VS-DEN time
TVSE
-
18
-
TH
HS-DEN time
DEN pulse width
THE
TEP
36
-
68
320
88
-
TOSC
TOSC
-
262
-
TH
VS period
st
Remark
Note 7-5
th
Note 7-5 : When SYNC mode is used, 1 data start from 68 CLK after HS fallings.
7.4.3 CCIR601/656 Interface
Characteristics
CLK period
Data setup time
Data hold time
Symbol
TOSC
TSU
THD
Min.
12
12
Typ.
37
-
Max.
-
Unit
ns
ns
ns
Remark
7.4.4 Hardware reset timing
Characteristics
RESETB low pulse width
Symbol
TRSB
Min.
200
Typ.
-
Max.
-
Unit
ns
Remark
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.
PAGE:11
P-511-295(V:2)
PD035OX4
7.5 Timing controller timing chart
7.5.1 Clock and Data waveform
$ % ' ! ( ) * + + # "
"
# "
#
"
!
$ % & %
#
"
! The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.
PAGE:12
P-511-295(V:2)
PD035OX4
7.5.2 HS,VS,DEN timing waveform
HS and VS timing relationship
O d d fie ld
THVO
HS
VS
E v e n fie ld
HS
TH V E
VS
HS and DEN timing relationship
T HS
HS
T HE
DEN
HS, VS and DEN timing relationship
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.
PAGE:13
P-511-295(V:2)
PD035OX4
HS
T VS
VS
T VSE
DEN
T EP
7.5.3 CCIR601 timing waveform (VS_POL=”H”, HS_POL=”L” in Register R2)
ITU-R BT.601 NTSC Input Timing
Data
Blanking
Data
Blanking
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.
PAGE:14
P-511-295(V:2)
PD035OX4
ITU-R BT.601 PAL Input Timing
Data
Blanking
Data
Blanking
8. Pixel Arrangement
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.
PAGE:15
P-511-295(V:2)
PD035OX4
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.
PAGE:16
P-511-295(V:2)
PD035OX4
9. Display Color and Gray Scale Reference
Input Color Data
Color
Red
Green
Blue
R7 R6 R5 R4 R3 R2 R1 R0 G G G G G G G G B7 B6 B5 B4 B3 B2 B1 B0
7
6
5
4
3
2
1
0
Black
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Red (255)
1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Green (255) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0
Basic Blue (255)
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1
Colors Cyan
Magenta
0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1
Yellow
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0
White
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Red (00)
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Red (01)
0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Red (02)
0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Darker
Red
Brighter
Red (253)
1 1 1 1 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Red (254)
1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Red (255)
1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Green (00)
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Green (01)
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0
Green (02)
0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0
Darker
Green
Brighter
Green (253) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 1 0 0 0 0 0 0 0 0
Green (254) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0
Green (255) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0
Blue (00)
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Blue (01)
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
Blue (02)
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0
Darker
Blue
Brighter
Blue (253)
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 1
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.
PAGE:17
P-511-295(V:2)
PD035OX4
Blue (254)
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0
Blue (255)
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1
10. Block Diagram
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.
PAGE:18
P-511-295(V:2)
PD035OX4
11. SPI Register Description and Timing Characteristics
11.1 Function Control Register
Register R0 :Address(A3~A0)0000
Bit
D7
D6
D5
D4
D3
D2
D1
D0
reserve
Name
STHD1 STHD0 STHP4 STHP3 STHP2 STHP1 STHP0
d
Default
0
0
0
0
0
0
0
0
STHD [1:0] : adjust start pulse position by dot
STHD1
STHD0
STH position adjust by dot
1
1
-1
1
0
-2
0
0
0
0
1
+1
STHP [4:0] : adjust start pulse position by pixel
STHP4 STHP3 STHP2 STHP1 STHP0
1
1
1
1
1
1
1
1
1
0
1
1
1
0
1
1
1
1
0
0
1
1
0
1
1
1
1
0
1
0
1
1
0
0
1
1
1
0
0
0
1
0
1
1
1
1
0
1
1
0
1
0
1
0
1
1
0
1
0
0
1
0
0
1
1
1
0
0
1
0
1
0
0
0
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
1
0
0
0
0
1
1
0
0
1
0
0
0
0
1
0
1
0
0
1
1
0
0
0
1
1
1
0
1
0
0
0
0
1
0
0
1
0
1
0
1
0
0
1
0
1
1
0
1
1
0
0
0
1
1
0
1
0
1
1
1
0
STH position adjust by pixel
-1
-2
-3
-4
-5
-6
-7
-8
-9
-10
-11
-12
-13
-14
-15
-16
0
+1
+2
+3
+4
+5
+6
+7
+8
+9
+10
+11
+12
+13
+14
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.
PAGE:19
P-511-295(V:2)
0
1
1
1
Register R1 :Address(A3~A0)0001
1
+15
PD035OX4
Bit
D7
D6
D5
D4
D3
D2
D1
D0
Name STVP3 STVP2 STVP1 STVP0 STVNT1 STVNT0 STVPAL1 STVPAL0
Default
0
0
0
0
0
0
0
1
STVP [3:0] : adjust first line position by line
STVP3 STVP2 STVP1 STVP0
STV position adjust by line
1
1
1
1
-1
1
1
1
0
-2
1
1
0
1
-3
1
1
0
0
-4
1
0
1
1
-5
1
0
1
0
-6
1
0
0
1
-7
1
0
0
0
-8
0
0
0
0
0
0
0
0
1
+1
0
0
1
0
+2
0
0
1
1
+3
0
1
0
0
+4
0
1
0
1
+5
0
1
1
0
+6
0
1
1
1
+7
STVNT[1:0]: When NTSC mode, the relationship of first line in Even field and Odd field.
00: First line in Even field = First line in Odd field.
01: First line in Even field = First line in Odd field +1.
10: No use.
11: First line in Even field = First line in Odd field –1.
STVPAL[1:0]: When PAL mode, the relationship of first line in Even field and Odd field.
(Only for CCIR601/656 mode)
00: First line in Even field = First line in Odd field.
01: First line in Even field = First line in Odd field +1.
10: No use.
11: First line in Even field = First line in Odd field –1.
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.
PAGE:20
P-511-295(V:2)
PD035OX4
Register R2 :Address(A3~A0)0010
Bit
Name
Default
D7
D6
D5
D4
D3
D2
D1
D0
NPC_SE
reserved reserved reserved reserved HS_POL VS_POL NPC_IN
T
0
0
0
1
0
0
1
0
HS_POL: HS polarity setting.
HS_POL = “L”, negative polarity.
HS_POL = “H”, positive polarity.
VS_POL: VS polarity setting.
VS_POL = “L”, negative polarity.
VS_POL = “H”, positive polarity.
NPC_IN: Define the NTSC/PAL mode by SPI.
NPC_IN = “L”, PAL. (Only for CCIR601/656 mode)
NPC_IN = “H”, NTSC.
NPC_SET: Set the NTSC/PAL auto detection or define by NPC_IN.
NPC_SET = “L”, auto detection.
NPC_SET = “H”, define by SPI.
Register R3 :Address(A3~A0)0011
Bit
D7
D6
D5
D4
D3
D2
D1
D0
Reserve Reserved
Name Reserved Reserved Reserved Reserved PWD_EN Reserved
d
Default
0
0
1
0
1
0
1
1
PWD_EN: Set DAC power saving function.
PWD_EN = “L”, disable. The DAC is always power on.
PWD_EN = “H”, enable.
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.
PAGE:21
P-511-295(V:2)
PD035OX4
11-2 SPI timing characteristic
Characteristics
SPCK period
SPCK high width
SPCK low width
Data setup time
Data hold time
SPENA to SPCK setup time
SPENA to SPDA hold time
SPENA high pulse width
SPDA output latency
SPI"read"timing
Symbol
TCK
TCKH
TCKL
TSU1
THD1
TCS
TCE
TCD
TCR
Min.
60
30
30
12
12
20
20
50
-
1
A3
Max.
-
Unit
ns
ns
ns
ns
ns
ns
ns
ns
TCK
Remark
TCR
TSU1 THD1
SPDA
Typ.
1/2
A2
A1
A0
D7
D6
D5
D4
D3
D2
D1
D0
TCKL
SPCK
TCKH
TCK
SPENA
TCD
TCS
TCE
SPI"write"timing
TSU1 THD1
SPDA
0
A3
A2
A1
A0
D7
D6
D5
D4
D3
D2
D1
D0
TCKL
SPCK
TCKH
TCK
SPENA
TCD
TCS
TCE
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.
PAGE:22
P-511-295(V:2)
PD035OX4
12. Power On Sequence
The Power on sequence only effect by VCC,VSS,VDD,VEE and VGH, the others do not care.
1) 10msT1<T2
2) 0ms<T3T410ms
13. Optical Characteristics
Parameter
Symbol
Horizontal 21, 22
Viewing
11
Vertical
Angle
12
Condition
CR10
MIN.
55
40
30
TYP. MAX.
60
--45
--35
---
200
400
---
Ta = 25
Unit Remarks
deg
deg Note 13-1
deg
At optimized
Contrast Ratio
CR
Viewing
Note 13-2
angle
Tr
Tf
=0
-----
15
25
30
50
ms
ms
Note 13-3
Uniformity
U
9 point
70
75
-
%
Note 13-4
Brightness
White
x
y
-
Center point
=0
=0
-
200
-
250
0.31
0.33
30000
-
Response time
Chromaticity
LED Life Time
Rise
Fall
Ta=25
cd/ Note 13-5
Note 13-5
hrs
Note13-6
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.
PAGE:23
P-511-295(V:2)
PD035OX4
Note 13-1 : The definitions of viewing angles
Note 13-2 : CR Luminance when Testing point is White
Luminance when Testing point is Black
Contrast ratio is measured in optimum common electrode voltage.
Note 13-3 : The definition of response time :
White
Black
W hite
100%
90%
Brightness
10%
0%
Tr
Tf
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.
PAGE:24
P-511-295(V:2)
PD035OX4
Note 13-4 : The uniformity of LCD is defined as
The Minimum Brightness of the 9 testing Points
The Maximum Brightness of the 9 testing Points
Luminance meter : BM-5A or BM-7 fast (TOPCON)
Measurement distance : 500 mm +/- 50 mm
Ambient illumination : < 1 Lux
Measuring direction : Perpendicular to the surface of module
U=
The test pattern is white (Gray Level 63).
1 /6
2 /6
2 /6
1 /6
1 /6
2 /6
2 /6
1 /6
Note 13-5 : Topcon BM-7(fast) luminance meter 1.0 field of view is used in the testing (use PVI
backlight after 5 minutes operating), ILED = 20mA.
Note 13-6 : Constant current 20mA for each loop , and the center brightness must more than 50% of
initial brightness value .
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.
PAGE:25
P-511-295(V:2)
14. Handling Cautions
PD035OX4
14-1) Mounting of module
a) Please power off the module when you connect the input/output connector.
b) Please connect the ground pattern of the inverter circuit surely. If the connection
is not perfect, some following problems may happen possibly.
1. The noise from the backlight unit will increase.
2. The output from inverter circuit will be unstable.
3. In some cases a part of module will heat.
c) Polarizer which is made of soft material and susceptible to flaw must be handled
carefully.
d) Protective film (Laminator) is applied on surface to protect it against scratches
and dirts. It is recommended to peel off the laminator before use and taking care
of static electricity.
14-2) Precautions in mounting
a) When metal part of the TFT-LCD module (shielding lid and rear case) is soiled,
wipe it with soft dry cloth.
b) Wipe off water drops or finger grease immediately. Long contact with water may
cause discoloration or spots.
c) TFT-LCD module uses glass which breaks or cracks easily if dropped or bumped on hard
surface. Please handle with care.
d) Since CMOS LSI is used in the module. So take care of static electricity and
earth yourself when handling.
14-3) Adjusting module
a)
Adjusting volumes on the rear face of the module have been set optimally before
shipment.
b)
Therefore, do not change any adjusted values. If adjusted values are changed, the
specifications described may not be satisfied.
14-3) Others
a) Do not expose the module to direct sunlight or intensive ultraviolet rays for many
hours.
b) Store the module at a room temperature place.
c)
The voltage of beginning electric discharge may over the normal voltage because of
leakage current from approach conductor by to draw lump read lead line around.
d)
If LCD panel breaks, it is possibly that the liquid crystal escapes from the panel.
Avoid putting it into eyes or mouth. When liquid crystal sticks on hands, clothes or feet.
Wash it out immediately with soap.
e)
Observe all other precautionary requirements in handling general electronic components.
f)
Please adjust the voltage of common electrode as material of attachment by 1 module.
14-4) Polarizer mark
The polarizer mark is to describe the direction of wide view angle film how to mach up with
the rubbing direction.
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.
PAGE:26
P-511-295(V:2)
PD035OX4
15. Reliability Test
No
1
2
Test Item
High Temperature Storage Test
Low Temperature Storage Test
3
4
High Temperature Operation Test
Low Temperature Operation Test
High Temperature & High
Humidity Operation Test
Thermal Cycling Test
(non-operating)
5
6
7
Vibration test (non-operating)
8
Shock Test(non-operating)
9
Electrostatic Discharge Test
(non-operating)
Test Condition
Ta = +70, 240 hrs
Ta = -20, 240 hrs
Ta=60,240hrs
Ta = 0, 240 hrs
Ta = +60, 90%RH, 240 hrs
-20 +70 , 200 Cycles
30 min
30 min
Frequency : 10 ~ 55Hz
Amplitude : 1mm , sweep time : 11 mins
Test period : 6 cycles for each direction of X,Y, Z
100G , 6ms , 3cycles for each direction of X,Y,Z
200pF, 0
Machine mode = 200V
1 time / each terminal
Ta: ambient temperature
Note : The protective film must be removed before temperature test.
[Criteria]
1. Main LCD should normally work under the normally condition no defect of function,screen
quality and appearance (including : mura ,line defect ,no image)
2. After the vibration and shock test , can’t be found chip broken..
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.
PAGE:27
P-511-295(V:2)
PD035OX4
16. Packing
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.
PAGE:28
P-511-295(V:2)
PD035OX4
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.
PAGE:29
P-511-295(V:2)
PD035OX4
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.
PAGE:30
P-511-295(V:2)
Revision History
Rev.
0.1
1.0
Eng Issued Date
Dec.2 , 2005
Jan.13,2005
2.0
June,24,2006
PD035OX4
Revised Contents
Preliminary
Modify
Page 23 13. Optical Characteristics
LED Life Time 10000 hrs modify to 30000 hrs
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.
PAGE:31
P-511-295(V:2)
PD035OX4
Appendix
CON 2
VLED
(Pin 01)
15+ 0.5V
VLED
(Pin 01)
15+ 0.5V
LED
20K 5%
VC1
1KVR
GLED1
(Pin 02)
VB1
2SC2412
20K 5%
VC2
1KVR
20mA , 1V
2K 5%
VB2
VE1
2K 5%
LED
GLED2
(Pin 03)
2SC2412
20mA , 1V
VE2
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.
PAGE:32