Product catalogue | Terminals | Screwing technology | SAK-series modular terminals | TS 15 | Push-on connection General ordering data Order No. Part designation Version EAN Qty. 0324460000 AKZ 4 S WA 2X2.8 Special terminal, special connections, 4 mm², Screw connection, Polyamide, beige, TS 15 4008190132545 100 pc(s). Additional technical data Colour of insulating material Connection direction End plate required Explosion-tested version "Ex e" Installation advice Insulating material Levels cross-connected internally No. of identical terminals No. of levels No. of terminal strips per level Open sides Operating temperature range Product family Type of connection Type of mounting UL 94 flammability rating of insulation material Version beige on side Yes No TS 15 Polyamide No 1 1 2 right - 50 °C, + 100 °C SAK Series Screwed Snap-on V2 Feed-through terminal CSA rating data Voltage (CSA) CSA current Min. cross-section (CSA) 300 V 10 A AWG 24 -1- Product catalogue | Terminals | Screwing technology | SAK-series modular terminals | TS 15 | Push-on connection CSA rating data Max. cross-section (CSA) AWG 12 Conductors for clamping (additional connection) Type of connection No. of connections Flexible with ferrule, min. (DIN 46228 pt 1) Flexible with ferrule, max. (DIN 46228 pt 1) Flat-blade connection 2 0.5 mm² 2.5 mm² Conductors for clamping (rated connection) Type of connection 2nd type of connection Connection direction No. of connections Stripping length Clamping screw Blade size Tightening torque range Torque level with DMS electric screwdriver Gauge to IEC 60947-1 Solid, min. Solid, max. Stranded, min. Stranded, max. Flexible, min. Flexible, max. Flexible with ferrule, min. (DIN 46228/1) Flexible with ferrule, max. (DIN 46228/1) Flexible, min., ferrule with plastic collar (DIN 46228 pt 4) Flexible, max., ferrule with plastic collar (DIN 46228 pt 4) AWG conductor size, min. AWG conductor size, max. AWG conductor size, min. AWG conductor size, max. Screw connection screwed on side 1 8 mm M3 0.6 x 3.5 mm 0.6...0.8 Nm 2 A3 0.5 mm² 4 mm² 1.5 mm² 4 mm² 0.5 mm² 4 mm² 0.5 mm² 1 mm² 0.5 mm² 2.5 mm² AWG 24 AWG 12 0.2 mm² 4 mm² Dimensions Width Height of lowest version Length TS 15 offset 6 mm 30 mm 27 mm 13.5 mm Disconnect terminals Torque level with DMS electric screwdriver 2 Other connections Cable-lug connection No. of connections Rated cross-section spade connector 2.8 mm unslotted 2 1 mm² -2- Product catalogue | Terminals | Screwing technology | SAK-series modular terminals | TS 15 | Push-on connection Rating data Rated cross-section Rated voltage Rated impulse voltage Rated current Standards Current with max. conductor Pollution severity 4 mm² 400 V 6 kV 8A IEC 60947-7-1 / IEC 61210 8A 3 UL rating data Voltage (UL) Current (UL) Min. cross-section (UL) Max. cross-section (UL) 150 V 20 A AWG 22 AWG 12 Approvals Approvals institutes Classifications ETIM 2.0 ETIM 3.0 eClass 4.1 eClass 5.0 eClass 5.1 EC001283 EC001283 27-14-11-31 27-14-11-31 27-14-11-31 Similar products Order No. 0158760000 Part designation AKZ 4 SF SE 6.3/2.8 0324560000 AKZ 4 SS SE 6.3/2.8 0362460000 AKZ 4 SS WA 2X2.8 Version Special terminal, special connections, 4 mm², Screw connection, Polyamide, beige, TS 15 Special terminal, special connections, 2.5 mm², Flat-blade connection, Polyamide, beige, TS 15 Special terminal, special connections, 1 mm², Flat-blade connection, Polyamide, beige, TS 15 -3-