RENESAS PH5503A2NA1

Preliminary Data Sheet
PH5503A2NA1
Ambient Illuminance Sensor
R08DS0055EJ0100
Rev.1.00
Dec 13, 2011
DESCRIPTION
The PH5503A2NA1 is an ambient illuminance sensor with a photo diode and current amplifier. This product has
spectral characteristics close to human eye sensitivity and outputs light current proportional to the ambient brightness.
The PH5502B2NA1-E4 can be used to improve the performance and reduce the power consumption of digital
equipment such as FPD-TV sets and mobile phones, by enabling automatic brightness control and automatic switching
on and off of lighting systems.
FEATURES
• Small and thin SON package
2.55 x 1.56 x 0.55 mm
• Spectral characteristics close to human eye sensitivity
Peak sensitivity wavelength
555 nm TYP.
• Output characteristics proportional to illuminance
• Output light current
60 μA TYP.@100 lx (Fluorescent light)
• Reduced variation of output current among light sources
• Low voltage operation
VCC = 1.8 to 5.5 V
• Pb-free
APPLICATIONS
•
•
•
•
•
•
FPD TV sets, displays
Mobile phones, smartphones
Notebook PCs, tablet PCs
DSCs, DVCs
FA equipment
Lighting systems, etc.
R08DS0055EJ0100 Rev.1.00
Dec 13, 2011
Page 1 of 11
PH5503A2NA1
Chapter Title
PACKAGE DIMENSIONS (UNIT: mm)
TOP VIEW
2.55±0.2
0.2
2.25
6
2
5
3
4
0.2
0.22
1.56±0.15
0.5
1
Remark Pin 1 is distinguishable by the shape of the lead frame.
0.55
SIDE VIEW
(0.25)
BOTTOM VIEW
Remark ( ) indicates nominal dimensions.
Pin No.
1
2
3
4
5
6
Terminal
OUT
GND
VCC
NC
NC
NC
Remark 1. Connect all the NC terminals to GND or VCC.
2. The bypass capacitor between VCC and GND is to be mounted within 20 mm of the package body.
R08DS0055EJ0100 Rev.1.00
Dec 13, 2011
Page 2 of 11
PH5503A2NA1
Chapter Title
BLOCK DIAGRAM
VCC
Light
Source
OUT
GND
MARKING EXAMPLE
(Bottom View)
Assembly code
1 pin
03
Product code
ORDERING INFORMATION
Part Number
PH5503A2NA1
Order Number
PH5503A2NA1-E4
R08DS0055EJ0100 Rev.1.00
Dec 13, 2011
Packing Style
Embossed Tape 3 000 pcs/reel
Page 3 of 11
PH5503A2NA1
Chapter Title
ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified)
Parameter
Supply Voltage
Light Current
Power Dissipation *1
Operating Temperature
Storage Temperature
Note:
Symbol
VCC
IO
PD
Topt
Tstg
Ratings
6
5
135
−30 to +85
−40 to +100
Unit
V
mA
mW
°C
°C
*1. Mounted on glass epoxy board (18 mm × 13 mm × t0.8 mm)
RECOMMENDED OPERATING CONDITIONS
Parameter
Supply Voltage
Symbol
VCC
MIN.
1.8
TYP.
3.0
MAX.
5.5
Unit
V
ELECTRO-OPTICAL CHARACTERISTICS
(TA = 25°C, VCC = 3.0 V, unless otherwise specified)
Parameter
Supply Current *1
Peak Sensitivity Wavelength
Light Current *1
IO0
IO1
Sensitivity Ratio of
Fluorescent/Incandescent
Saturation Output Voltage *3
Switching
Rise Time
Time *4
Fall Time
Delay Time
Storage Time
Note:
Symbol
ICC
λp
−
VO
Conditions
EV = 100 lx *2
−
MIN.
−
−
TYP.
68
555
MAX.
−
−
Unit
μA
nm
EV = 0 lx
EV = 100 lx *2
EV = 100 lx
−
48
−
−
60
1
0.1
72
−
μA
μA
Multiple
*2
EV = 100 lx, RL = 150 kΩ
*5
RL = 5 kΩ
2.6
−
−
−
−
2.9
50
80
160
4
−
−
−
−
−
V
μs
μs
μs
μs
tr
tf
td
ts
*1 Measured under load resistance conditions of an output current unsaturated
*2 Fluorescent light
*3 Saturation output voltage measurement method:
VCC
VCC
Light
Source
PH5503A
OUT
RL
GND
VCC
VO
Illuminance (lx)
R08DS0055EJ0100 Rev.1.00
Dec 13, 2011
Page 4 of 11
PH5503A2NA1
Chapter Title
*4 Switching Time
Pulse input
VCC
VCC
OUT
PH5503A
RL
GND
Input
90%
Output
10%
td
ts
tr
tf
*5 White LED
R08DS0055EJ0100 Rev.1.00
Dec 13, 2011
Page 5 of 11
PH5503A2NA1
Chapter Title
TYPICAL CHARACTERISTICS (TA = 25°C, VCC = 3.0 V, unless otherwise specified)
SPECTRAL SENSITIVITY
CHARACTERISTICS
LIGHT SOURCE SENSITIVITY
VARIATION
1.1
1
Fluorescent light
0.9
0.8
Incandescent light
Ratio
0.7
0.6
Halogen light
0.5
0.4
Krypton light
0.3
0.2
White LED
0
0.5
1
1.5
2
Wavelength (nm)
Ratio
DIRECTIONAL CHARACTERISTICS 1
DIRECTIONAL CHARACTERISTICS 2
1.2
1.2
1
1
0.8
0.8
Ratio
Ratio
0.1
0
300 400 500 600 700 800 900 1 000 1 100 1 200
0.6
1 pin
0.4
1 pin
0.4
-
+
-
+
0.2
0.2
0
−90
0.6
−60
−30
0
30
60
90
Angle (deg.)
0
−90
−60
−30
0
30
60
90
Angle (deg.)
Remark The graphs indicate nominal characteristics.
R08DS0055EJ0100 Rev.1.00
Dec 13, 2011
Page 6 of 11
PH5503A2NA1
Chapter Title
TEMPERATURE DEPENDENCY
OF LIGHT CURRENT AT 0 lx
LIGHT CURRENT VS. ILLUMINANCE
10 000
1
a
b
1 000
c
100
IO0 (μA)
IO1 (μA)
0.1
0.01
10
Load between OUT-GND
a: No load
b: 1 kΩ
c: 10 kΩ
1
1
10
100
1 000
10 000
0.001
−40
−20
0
Illuminance (lx)
1.2
1.2
1
1
0.8
0.8
Ratio
Ratio
1.4
0.6
0.4
0.2
0.2
20
40
80
100
0.6
0.4
0
60
VCC DEPENDENCY OF LIGHT CURRENT
AT 100 lx (NORMALIZED AT VCC = 3 V)
1.4
−20
40
Temperature (°C)
TEMPERATURE DEPENDENCY OF LIGHT
CURRENT AT 100 lx (NORMALIZED AT 25°C)
0
−40
20
60
80
100
Temperature (°C)
0
2
2.5
3
3.5
4
4.5
5
5.5
6
VCC (V)
Remark The graphs indicate nominal characteristics.
R08DS0055EJ0100 Rev.1.00
Dec 13, 2011
Page 7 of 11
PH5503A2NA1
Chapter Title
RECOMMENDED OPTICAL LAYOUT (UNIT: mm)
1.275
0.78
1.275
Offset
0.06
It is recommended to position the sensor so that light hits a circular
area (shown by the dotted line) with a radius of 1.5 to 2 mm (diameter
of 3 to 4 mm) from the center of the package.
1 pin
0.78
Light detecting area (0.24 x 0.24 mm)
Recommended area for light to hit (1.5 to 2 mm radius)
R08DS0055EJ0100 Rev.1.00
Dec 13, 2011
Page 8 of 11
PH5503A2NA1
Chapter Title
TAPING SPECIFICATIONS (UNIT: mm)
1.75±0.1
Outline and Dimensions (Tape)
0.2±0.05
2.9
3.5±0.05
2.0±0.1
8.0±0.2
4.0±0.1
φ 1.5 +0.1
–0
φ 1.05±0.05
4.0±0.1
1.95
0.78±0.05
0.78±0.05
Tape Direction
Direction of feed
Carrier tape
Perforation
Product
Product
Cover tape
Pin 1
Outline and Dimensions (Reel)
θ1
θ2
D
C
B
A
E
W
Symbol
Dimensions (mm)
Symbol
Dimensions (mm)
A
φ 180 +0
–1.5
C
φ 13±0.2
B
φ 60
+1
–0
D
2.0±0.5
9.0 +1
–0
E
21.0±0.8
θ1
90°
θ2
120°
W
R08DS0055EJ0100 Rev.1.00
Dec 13, 2011
Page 9 of 11
PH5503A2NA1
Chapter Title
0.22
0.5
0.5
0.24
1.85
0.55
0.22
0.22
0.5
0.5
0.24
0.22
RECOMMENDED MOUNT PAD DIMENSIONS (Unit: mm)
Remark All dimensions in this figure must be evaluated before use.
R08DS0055EJ0100 Rev.1.00
Dec 13, 2011
Page 10 of 11
PH5503A2NA1
Chapter Title
NOTES ON HANDLING
1. Recommended reflow soldering conditions
(including infrared reflow, convection reflow, and infrared + convection reflow)
(1) This product is dry-packed with desiccant in order to avoid moisture absorption.
(2) After breaking the seal, reflow soldering must be done within 168 hours under the recommended temperature
profile shown below.
(3) If more than 168 hours have passed after breaking the seal, the baking process must be done by using a tape and
reel.
Baking conditions: Once, with tape and reel, 60±5°C, 10 to 24 hours
After the baking process, this product must be stored under conditions of 30°C or below, 70% RH or below, and
reflow soldering must be done within 168 hours.
< Storage conditions after breaking seal >
• Storage conditions
• Maximum storage period after breaking seal
: 30°C or below, 70% RH or below
: 168 hours (Second reflow soldering must be completed
within 168 hours.)
< Reflow soldering conditions >
• Peak reflow temperature
: 260°C or below (Package surface temperature)
• Maximum number of reflows
:2
• No repair by hand soldering
• Maximum chlorine content of rosin flux (percentage mass) : 0.2% or less
Recommended Temperature Profile of Reflow
Peak Temperature
260°C MAX.
255°C
Ramp-up rate 3°C/s MAX.
Ramp-down rate 6°C/s MAX.
Package Surface Temperature
220°C
200°C
30 s or less
150°C
60 to 120 s
60 s or less
Time
8 min. MAX.
R08DS0055EJ0100 Rev.1.00
Dec 13, 2011
Page 11 of 11
Revision History
PH5503A2NA1 Data Sheet
Rev.
Date
Page
1.00
Dec 13, 2011
−
Description
Summary
First edition issued
All trademarks and registered trademarks are the property of their respective owners.
C-1
Notice
1.
All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas
Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to
be disclosed by Renesas Electronics such as that disclosed through our website.
2.
Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or
technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or
others.
3.
You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.
4.
Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for
the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the
use of these circuits, software, or information.
5.
When exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and
regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to
the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is
prohibited under any applicable domestic or foreign laws or regulations.
6.
Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics
7.
Renesas Electronics products are classified according to the following three quality grades: "Standard", "High Quality", and "Specific". The recommended applications for each Renesas Electronics product
assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein.
depends on the product's quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas
Electronics product for any application categorized as "Specific" without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for
which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the
use of any Renesas Electronics product for an application categorized as "Specific" or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics.
The quality grade of each Renesas Electronics product is "Standard" unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc.
"Standard":
Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools;
personal electronic equipment; and industrial robots.
"High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; safety equipment; and medical equipment not specifically
designed for life support.
"Specific":
Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical
implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life.
8.
You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage
range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the
use of Renesas Electronics products beyond such specified ranges.
9.
Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and
malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the
possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to
redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult,
please evaluate the safety of the final products or system manufactured by you.
10. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics
products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes
no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations.
11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics.
12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries.
(Note 1)
"Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries.
(Note 2)
"Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics.
http://www.renesas.com
SALES OFFICES
Refer to "http://www.renesas.com/" for the latest and detailed information.
Renesas Electronics America Inc.
2880 Scott Boulevard Santa Clara, CA 95050-2554, U.S.A.
Tel: +1-408-588-6000, Fax: +1-408-588-6130
Renesas Electronics Canada Limited
1101 Nicholson Road, Newmarket, Ontario L3Y 9C3, Canada
Tel: +1-905-898-5441, Fax: +1-905-898-3220
Renesas Electronics Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K
Tel: +44-1628-585-100, Fax: +44-1628-585-900
Renesas Electronics Europe GmbH
Arcadiastrasse 10, 40472 Düsseldorf, Germany
Tel: +49-211-65030, Fax: +49-211-6503-1327
Renesas Electronics (China) Co., Ltd.
7th Floor, Quantum Plaza, No.27 ZhiChunLu Haidian District, Beijing 100083, P.R.China
Tel: +86-10-8235-1155, Fax: +86-10-8235-7679
Renesas Electronics (Shanghai) Co., Ltd.
Unit 204, 205, AZIA Center, No.1233 Lujiazui Ring Rd., Pudong District, Shanghai 200120, China
Tel: +86-21-5877-1818, Fax: +86-21-6887-7858 / -7898
Renesas Electronics Hong Kong Limited
Unit 1601-1613, 16/F., Tower 2, Grand Century Place, 193 Prince Edward Road West, Mongkok, Kowloon, Hong Kong
Tel: +852-2886-9318, Fax: +852 2886-9022/9044
Renesas Electronics Taiwan Co., Ltd.
13F, No. 363, Fu Shing North Road, Taipei, Taiwan
Tel: +886-2-8175-9600, Fax: +886 2-8175-9670
Renesas Electronics Singapore Pte. Ltd.
1 harbourFront Avenue, #06-10, keppel Bay Tower, Singapore 098632
Tel: +65-6213-0200, Fax: +65-6278-8001
Renesas Electronics Malaysia Sdn.Bhd.
Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No. 18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia
Tel: +60-3-7955-9390, Fax: +60-3-7955-9510
Renesas Electronics Korea Co., Ltd.
11F., Samik Lavied' or Bldg., 720-2 Yeoksam-Dong, Kangnam-Ku, Seoul 135-080, Korea
Tel: +82-2-558-3737, Fax: +82-2-558-5141
© 2011 Renesas Electronics Corporation. All rights reserved.
Colophon 1.1