PI6C2501A 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 Phase-Locked Loop Clock Driver Product Features Product Description • High-Performance, Phase-Locked-Loop Clock Driver and zerodelay buffer The PI6C2501A features a low-skew, low-jitter, phase-locked loop (PLL) clock driver. By connecting the CLK_OUT output to the feedback FB_IN input, the propagation delay from the CLK_IN input to CLK_OUT output will be nearly zero. • Allows Clock Input to have Spread Spectrum modulation for EMI reduction • Zero Input-to-Output delay • Low jitter: Cycle-to-Cycle jitter ±75ps max. Application • On-chip series damping resistor at clock output drivers for low noise and EMI reduction If a system designer needs more than 16 outputs with the features just described, using two or more zero-delay buffers, such as the PI6C2509Q, or PI6C2510Q, is likely to be impractical. The device-to-device skew introduced can significantly reduce the performance. Pericom recommends using a zero-delay buffer and an eighteen output non-zero-delay buffer. As shown in Figure 1, this combination produces a zero-delay buffer with all the signal characteristics of the original zero-delay buffer, but with as many outputs as the non-zero-delay buffer part. For example, when combined with an eighteen output non-zero delay buffer, a system designer can create a seventeen-output zero-delay buffer. • Operates at 3.3V VCC • Wide range of Clock Frequencies 80 to 134 MHz • Package: Plastic 8-pin 150-mil SOIC (W) Plastic 8-pin 150-mil SOIC (WE) Pb-free Product Pin Configuration Logic Block Diagram FB_IN AGND GND CLK_OUT AVCC VCC CLK_IN CLK_OUT PLL 1 2 3 4 8-Pin W 8 7 CLK_IN AVCC 6 5 GND FB_IN Feedback Reference Clock Signal Zero Delay Buffer PI6C2501 CLK_OUT 18 Outputs Non-PLL Buffer V C 17 Figure 1. This Combination Provides Zero-Delay Between the Reference Clock Signal and 17 Outputs 1 PS8499A 09/19/05 PI6C2501A Phase-Locked Loop Clock Driver 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 Pin Functions Pin Name Pin No. Type De s cription CLK_IN 8 I Reference Clock input. CLK_IN allows spread spectrum clock input. FB_IN 5 I Feedback input. FB_IN provides the feedback signal to the internal PLL. CLK_OUT 3 O Clock output. This output provides a low- skew copy of CLK_IN. The output has an embedded series- damping resistor. AVC C 7 Power Analog power supply. AVC C can be also used to bypass the PLL for test purpose. When AVC C is strapped to ground, PLL is bypassed and CLK_IN is buffered directly to the device outputs. AGND 1 Ground Analog ground. AGND provides the ground reference for the analog circuitry. VC C 4 Power Power supply. GND 2, 6 Ground Ground. DC Specifications(1) (Absolute maximum ratings over operating free-air temperature range) Symbol Parame te r M in. VI Input voltage range VO Output voltage range M a x. Units VCC +0.5 –0.5 V VI_DC DC input voltage 3.8 IO_DC DC output current 100 mA Power Maximum power dissipation at TA = 55oC in still air 1.0 W TSTG Storage temperature 150 oC –65 Note: 1. Stress beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. Parame te r Te s t Conditions VCC ICC VI = VCC or GND; IO = 0(2) Standby Current CI VI = VCC or GND CO VO =VCC or GND M in. Typ. 3.6V M a x. Units 10 μA 4 3.3V pF 6 Note: 2. Continuous Output Current Recommended Operating Conditions Symbol Parame te r M in. M a x. 3.6 VCC Supply voltage 3.0 VIH High level input voltage 2.0 VIL Low level input voltage VI Input voltage 0 VCC TA Operating free- air temperature 0 70 Units V 0.8 2 ºC PS8499A 09/19/05 PI6C2501A Phase-Locked Loop Clock Driver 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 Electrical Characteristics (Over Recommended Operating Free-Air Temperature Range Pull Up/Down Currents of PI6C2501A, VCC = 3.0V) Symbol IOH Parame te r Condition M in. M a x. Pull- up current Vout = 2.4V –13.6 Pull- up current Vout = 2.0V –22 Pull- down current Vout = 0.8V 19 Pull- down current Vout = 0.55V 13 Units mA IOL AC Specifications (Timing requirements over recommended ranges of supply voltage and operating free-air temperature) Symbol Parame te r M in. M a x. Units FCLK Clock frequency 80 13 4 MHz DCYI Input clock duty cycle 40 60 % 1 ms Stabilization Time after power up Switching Characteristics(3) (Over recommended ranges of supply voltage and operating free-air temperature, CL = 30pF) Parame te r From (Input) tphase error without jitter CLK_IN↑ at 100 & 66 MHz Jitter, cycle- to- cycle At 100 & 66 MHz To (Output) FB_IN↑ Duty cycle CLK_OUT tr, rise- time, 0.4V to 2.0V tf, fall- time, 2.0V to 0.4V VCC = 3.3V ±0.3V, 0-70°C M in. Typ. M ax. –150 +150 –7 5 +75 45 55 1.0 Units ps % ns 1.1 Note: 3. These switching parameters are guaranteed by design. 3 PS8499A 09/19/05 PI6C2501A Phase-Locked Loop Clock Driver 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 Package Mechanical Information: Plastic 8-pin SOIC Package. 8 .149 .157 3.78 3.99 .0099 .0196 0.25 x 45˚ 0.50 1 .189 .196 4.80 5.00 .0075 .0098 0-8˚ 0.19 0.25 0.40 .016 1.27 .050 .016 .026 0.406 0.660 .2284 .2440 5.80 6.20 1.35 1.75 .053 .068 SEATING PLANE REF .050 BSC 1.27 .0040 0.10 .0098 0.25 .013 0.330 .020 0.508 X.XX DENOTES DIMENSIONS X.XX IN MILLIMETERS Ordering Information Orde ring Code Package N ame Package Type Ope rating R ange PI6C 2501AW W 8- pin 150- mil SO IC C ommercial PI6C 2501AWE W 8- pin 150- mil SO IC C ommercial Pericom Semiconductor Corporation 2380 Bering Drive • San Jose, CA 95131 • 1-800-435-2336 • Fax (408) 435-1100 • http://www.pericom.com 4 PS8499A 09/19/05