P-TEC PL011

P-tec Corporation
Tel:(800)688-0613
2405 Commerce Circle Tel:(719) 589 3122
Alamosa Co. 81101
Fax:(719) 589 3592
www.p-tec.net
[email protected]
PL011 Series 1.8mm LED
Absolute Maximum Ratings at TA = 25°C
Features
*1.8mm Round Dome Lens
with Flange
*GaP Red LED Chip used
*Color Diffused Lens
*High Intensity
*Low Current Requirement
*Reliable and Rugged
*RoHS Compliant
Power Dissipation……………………………………………………………..…….…... 90mW
Reverse Voltage (<100µA)………..…………...…………………………..……..…..…..…. 5.0V
Max Forward Current…………..………………..……………………….……….…..….. 30mA
Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width)………………….….…..….…… 100mA
Operating Temperature Range…………………………………………….…… -25°C to +85°C
Storage Temperature Range..………….………………….……………......… -40°C to +100°C
Soldering Temperature (1.6mm below body)……………………………...….. 260°C for 5 seconds
Electrical & Optical Characteristics at TA = 25°C
Part Number
Emitting
Color
Chip
Material
Color Diffused Lens
PL011-CDR24
Red
GaP
Peak
Wave
Length
Dominant
Wave
Length
Viewing
Angle
2θ ½
nm
nm
Deg
Typ
Max
Min
Typ
700
650
30°
2.1
3.0
4.0
8.0
Forward
Voltage
@20mA (V)
Luminous
Intensity
@20mA (mcd)
All dimensions are in Millimeters. Tolerance is ± 0.25mm unless otherwise specified. An epoxy meniscus may extend about 1 mm down the leads.
3.00
2.40
25.0 Typ.
1.55 1.45
1.80 3.30
R 1.7
Anode
03-07-07 Rev 0 RS